]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
Merge remote-tracking branch 'v9fs/for-next'
[karo-tx-linux.git] / Documentation / devicetree / bindings / dma / adi,axi-dmac.txt
1 Analog Device AXI-DMAC DMA controller
2
3 Required properties:
4  - compatible: Must be "adi,axi-dmac-1.00.a".
5  - reg: Specification for the controllers memory mapped register map.
6  - interrupts: Specification for the controllers interrupt.
7  - clocks: Phandle and specifier to the controllers AXI interface clock
8  - #dma-cells: Must be 1.
9
10 Required sub-nodes:
11  - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
12    the channel sub-nodes the following bindings apply. They must match the
13    configuration options of the peripheral as it was instantiated.
14
15 Required properties for adi,channels sub-node:
16  - #size-cells: Must be 0
17  - #address-cells: Must be 1
18
19 Required channel sub-node properties:
20  - reg: Which channel this node refers to.
21  - adi,length-width: Width of the DMA transfer length register.
22  - adi,source-bus-width,
23    adi,destination-bus-width: Width of the source or destination bus in bits.
24  - adi,source-bus-type,
25    adi,destination-bus-type: Type of the source or destination bus. Must be one
26    of the following:
27         0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
28         1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
29         2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
30
31 Optional channel properties:
32  - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
33    transfers.
34  - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
35
36 DMA clients connected to the AXI-DMAC DMA controller must use the format
37 described in the dma.txt file using a one-cell specifier. The value of the
38 specifier refers to the DMA channel index.
39
40 Example:
41
42 dma: dma@7c420000 {
43         compatible = "adi,axi-dmac-1.00.a";
44         reg = <0x7c420000 0x10000>;
45         interrupts = <0 57 0>;
46         clocks = <&clkc 16>;
47         #dma-cells = <1>;
48
49         adi,channels {
50                 #size-cells = <0>;
51                 #address-cells = <1>;
52
53                 dma-channel@0 {
54                         reg = <0>;
55                         adi,source-bus-width = <32>;
56                         adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
57                         adi,destination-bus-width = <64>;
58                         adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
59                 };
60         };
61 };