]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - Documentation/devicetree/bindings/dma/ti-edma.txt
Merge remote-tracking branch 'drm-tegra/drm/tegra/for-next'
[karo-tx-linux.git] / Documentation / devicetree / bindings / dma / ti-edma.txt
1 Texas Instruments eDMA
2
3 The eDMA3 consists of two components: Channel controller (CC) and Transfer
4 Controller(s) (TC). The CC is the main entry for DMA users since it is
5 responsible for the DMA channel handling, while the TCs are responsible to
6 execute the actual DMA tansfer.
7
8 ------------------------------------------------------------------------------
9 eDMA3 Channel Controller
10
11 Required properties:
12 - compatible:   "ti,edma3-tpcc" for the channel controller(s)
13 - #dma-cells:   Should be set to <2>. The first number is the DMA request
14                 number and the second is the TC the channel is serviced on.
15 - reg:          Memory map of eDMA CC
16 - reg-names:    "edma3_cc"
17 - interrupts:   Interrupt lines for CCINT, MPERR and CCERRINT.
18 - interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint"
19 - ti,tptcs:     List of TPTCs associated with the eDMA in the following form:
20                 <&tptc_phandle TC_priority_number>. The highest priority is 0.
21
22 Optional properties:
23 - ti,hwmods:    Name of the hwmods associated to the eDMA CC
24 - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
25                 these channels will be SW triggered channels. The list must
26                 contain 16 bits numbers, see example.
27 - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
28                 the driver, they are allocated to be used by for example the
29                 DSP. See example.
30
31 ------------------------------------------------------------------------------
32 eDMA3 Transfer Controller
33
34 Required properties:
35 - compatible:   "ti,edma3-tptc" for the transfer controller(s)
36 - reg:          Memory map of eDMA TC
37 - interrupts:   Interrupt number for TCerrint.
38
39 Optional properties:
40 - ti,hwmods:    Name of the hwmods associated to the given eDMA TC
41 - interrupt-names: "edma3_tcerrint"
42
43 ------------------------------------------------------------------------------
44 Example:
45
46 edma: edma@49000000 {
47         compatible = "ti,edma3-tpcc";
48         ti,hwmods = "tpcc";
49         reg =   <0x49000000 0x10000>;
50         reg-names = "edma3_cc";
51         interrupts = <12 13 14>;
52         interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint";
53         dma-requests = <64>;
54         #dma-cells = <2>;
55
56         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
57
58         /* Channel 20 and 21 is allocated for memcpy */
59         ti,edma-memcpy-channels = /bits/ 16 <20 21>;
60         /* The following PaRAM slots are reserved: 35-45 and 100-110 */
61         ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
62                                        /bits/ 16 <100 10>;
63 };
64
65 edma_tptc0: tptc@49800000 {
66         compatible = "ti,edma3-tptc";
67         ti,hwmods = "tptc0";
68         reg =   <0x49800000 0x100000>;
69         interrupts = <112>;
70         interrupt-names = "edm3_tcerrint";
71 };
72
73 edma_tptc1: tptc@49900000 {
74         compatible = "ti,edma3-tptc";
75         ti,hwmods = "tptc1";
76         reg =   <0x49900000 0x100000>;
77         interrupts = <113>;
78         interrupt-names = "edm3_tcerrint";
79 };
80
81 edma_tptc2: tptc@49a00000 {
82         compatible = "ti,edma3-tptc";
83         ti,hwmods = "tptc2";
84         reg =   <0x49a00000 0x100000>;
85         interrupts = <114>;
86         interrupt-names = "edm3_tcerrint";
87 };
88
89 sham: sham@53100000 {
90         compatible = "ti,omap4-sham";
91         ti,hwmods = "sham";
92         reg = <0x53100000 0x200>;
93         interrupts = <109>;
94         /* DMA channel 36 executed on eDMA TC0 - low priority queue */
95         dmas = <&edma 36 0>;
96         dma-names = "rx";
97 };
98
99 mcasp0: mcasp@48038000 {
100         compatible = "ti,am33xx-mcasp-audio";
101         ti,hwmods = "mcasp0";
102         reg = <0x48038000 0x2000>,
103                 <0x46000000 0x400000>;
104         reg-names = "mpu", "dat";
105         interrupts = <80>, <81>;
106         interrupt-names = "tx", "rx";
107         status = "disabled";
108         /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
109         dmas = <&edma 8 2>,
110                <&edma 9 2>;
111         dma-names = "tx", "rx";
112 };
113
114 ------------------------------------------------------------------------------
115 DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
116 binding.
117
118 Required properties:
119 - compatible : "ti,edma3"
120 - #dma-cells: Should be set to <1>
121               Clients should use a single channel number per DMA request.
122 - reg: Memory map for accessing module
123 - interrupt-parent: Interrupt controller the interrupt is routed through
124 - interrupts: Exactly 3 interrupts need to be specified in the order:
125               1. Transfer completion interrupt.
126               2. Memory protection interrupt.
127               3. Error interrupt.
128 Optional properties:
129 - ti,hwmods: Name of the hwmods associated to the EDMA
130 - ti,edma-xbar-event-map: Crossbar event to channel map
131
132 Deprecated properties:
133 Listed here in case one wants to boot an old kernel with new DTB. These
134 properties might need to be added to the new DTS files.
135 - ti,edma-regions: Number of regions
136 - ti,edma-slots: Number of slots
137 - dma-channels: Specify total DMA channels per CC
138
139 Example:
140
141 edma: edma@49000000 {
142         reg = <0x49000000 0x10000>;
143         interrupt-parent = <&intc>;
144         interrupts = <12 13 14>;
145         compatible = "ti,edma3";
146         ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
147         #dma-cells = <1>;
148         ti,edma-xbar-event-map = /bits/ 16 <1 12
149                                             2 13>;
150 };