]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
Merge remote-tracking branch 'v9fs/for-next'
[karo-tx-linux.git] / Documentation / devicetree / bindings / input / gpio-matrix-keypad.txt
1 * GPIO driven matrix keypad device tree bindings
2
3 GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
4 The matrix keypad supports multiple row and column lines, a key can be
5 placed at each intersection of a unique row and a unique column. The matrix
6 keypad can sense a key-press and key-release by means of GPIO lines and
7 report the event using GPIO interrupts to the cpu.
8
9 Required Properties:
10 - compatible:           Should be "gpio-matrix-keypad"
11 - row-gpios:            List of gpios used as row lines. The gpio specifier
12                         for this property depends on the gpio controller to
13                         which these row lines are connected.
14 - col-gpios:            List of gpios used as column lines. The gpio specifier
15                         for this property depends on the gpio controller to
16                         which these column lines are connected.
17 - linux,keymap:         The definition can be found at
18                         bindings/input/matrix-keymap.txt
19
20 Optional Properties:
21 - linux,no-autorepeat:  do no enable autorepeat feature.
22 - wakeup-source:        use any event on keypad as wakeup event.
23 - debounce-delay-ms:    debounce interval in milliseconds
24 - col-scan-delay-us:    delay, measured in microseconds, that is needed
25                         before we can scan keypad after activating column gpio
26
27 Example:
28         matrix-keypad {
29                 compatible = "gpio-matrix-keypad";
30                 debounce-delay-ms = <5>;
31                 col-scan-delay-us = <2>;
32
33                 row-gpios = <&gpio2 25 0
34                              &gpio2 26 0
35                              &gpio2 27 0>;
36
37                 col-gpios = <&gpio2 21 0
38                              &gpio2 22 0>;
39
40                 linux,keymap = <0x0000008B
41                                 0x0100009E
42                                 0x02000069
43                                 0x0001006A
44                                 0x0101001C
45                                 0x0201006C>;
46         };