arch/arm/boot/dts/am57xx-beagle-x15.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13
  14 / {
  15         model = "TI AM5728 BeagleBoard-X15";
  16         compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
  17
  18         aliases {
  19                 rtc0 = &mcp_rtc;
  20                 rtc1 = &tps659038_rtc;
  21                 rtc2 = &rtc;
  22                 display0 = &hdmi0;
  23         };
  24
  25         memory {
  26                 device_type = "memory";
  27                 reg = <0x80000000 0x80000000>;
  28         };
  29
  30         vdd_3v3: fixedregulator-vdd_3v3 {
  31                 compatible = "regulator-fixed";
  32                 regulator-name = "vdd_3v3";
  33                 vin-supply = <&regen1>;
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36         };
  37
  38         vtt_fixed: fixedregulator-vtt {
  39                 /* TPS51200 */
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vtt_fixed";
  42                 vin-supply = <&smps3_reg>;
  43                 regulator-min-microvolt = <3300000>;
  44                 regulator-max-microvolt = <3300000>;
  45                 regulator-always-on;
  46                 regulator-boot-on;
  47                 enable-active-high;
  48                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&leds_pins_default>;
  55
  56                 led@0 {
  57                         label = "beagle-x15:usr0";
  58                         gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
  59                         linux,default-trigger = "heartbeat";
  60                         default-state = "off";
  61                 };
  62
  63                 led@1 {
  64                         label = "beagle-x15:usr1";
  65                         gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
  66                         linux,default-trigger = "cpu0";
  67                         default-state = "off";
  68                 };
  69
  70                 led@2 {
  71                         label = "beagle-x15:usr2";
  72                         gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
  73                         linux,default-trigger = "mmc0";
  74                         default-state = "off";
  75                 };
  76
  77                 led@3 {
  78                         label = "beagle-x15:usr3";
  79                         gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
  80                         linux,default-trigger = "ide-disk";
  81                         default-state = "off";
  82                 };
  83         };
  84
  85         gpio_fan: gpio_fan {
  86                 /* Based on 5v 500mA AFB02505HHB */
  87                 compatible = "gpio-fan";
  88                 gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
  89                 gpio-fan,speed-map = <0     0>,
  90                                      <13000 1>;
  91                 #cooling-cells = <2>;
  92         };
  93
  94         extcon_usb1: extcon_usb1 {
  95                 compatible = "linux,extcon-usb-gpio";
  96                 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
  97                 pinctrl-names = "default";
  98                 pinctrl-0 = <&extcon_usb1_pins>;
  99         };
 100
 101         hdmi0: connector {
 102                 compatible = "hdmi-connector";
 103                 label = "hdmi";
 104
 105                 type = "a";
 106
 107                 port {
 108                         hdmi_connector_in: endpoint {
 109                                 remote-endpoint = <&tpd12s015_out>;
 110                         };
 111                 };
 112         };
 113
 114         tpd12s015: encoder {
 115                 compatible = "ti,tpd12s015";
 116
 117                 pinctrl-names = "default";
 118                 pinctrl-0 = <&tpd12s015_pins>;
 119
 120                 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
 121                         <&gpio6 28 GPIO_ACTIVE_HIGH>,   /* gpio6_28, LS OE */
 122                         <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
 123
 124                 ports {
 125                         #address-cells = <1>;
 126                         #size-cells = <0>;
 127
 128                         port@0 {
 129                                 reg = <0>;
 130
 131                                 tpd12s015_in: endpoint {
 132                                         remote-endpoint = <&hdmi_out>;
 133                                 };
 134                         };
 135
 136                         port@1 {
 137                                 reg = <1>;
 138
 139                                 tpd12s015_out: endpoint {
 140                                         remote-endpoint = <&hdmi_connector_in>;
 141                                 };
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &dra7_pmx_core {
 148         leds_pins_default: leds_pins_default {
 149                 pinctrl-single,pins = <
 150                         0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
 151                         0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
 152                         0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
 153                         0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
 154                 >;
 155         };
 156
 157         i2c1_pins_default: i2c1_pins_default {
 158                 pinctrl-single,pins = <
 159                         0x400 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.sda */
 160                         0x404 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.scl */
 161                 >;
 162         };
 163
 164         hdmi_pins: pinmux_hdmi_pins {
 165                 pinctrl-single,pins = <
 166                         0x408 (PIN_INPUT | MUX_MODE1)   /* i2c2_sda.hdmi1_ddc_scl */
 167                         0x40c (PIN_INPUT | MUX_MODE1)   /* i2c2_scl.hdmi1_ddc_sda */
 168                 >;
 169         };
 170
 171         i2c3_pins_default: i2c3_pins_default {
 172                 pinctrl-single,pins = <
 173                         0x2a4 (PIN_INPUT| MUX_MODE10)   /* mcasp1_aclkx.i2c3_sda */
 174                         0x2a8 (PIN_INPUT| MUX_MODE10)   /* mcasp1_fsx.i2c3_scl */
 175                 >;
 176         };
 177
 178         uart3_pins_default: uart3_pins_default {
 179                 pinctrl-single,pins = <
 180                         0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
 181                         0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 182                 >;
 183         };
 184
 185         mmc1_pins_default: mmc1_pins_default {
 186                 pinctrl-single,pins = <
 187                         0x36c (PIN_INPUT | MUX_MODE14)  /* mmc1sdcd.gpio219 */
 188                         0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 189                         0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
 190                         0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
 191                         0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
 192                         0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
 193                         0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 194                 >;
 195         };
 196
 197         mmc2_pins_default: mmc2_pins_default {
 198                 pinctrl-single,pins = <
 199                         0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 200                         0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 201                         0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 202                         0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 203                         0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 204                         0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 205                         0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 206                         0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 207                         0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 208                         0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 209                 >;
 210         };
 211
 212         cpsw_pins_default: cpsw_pins_default {
 213                 pinctrl-single,pins = <
 214                         /* Slave 1 */
 215                         0x250 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_tclk */
 216                         0x254 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_tctl */
 217                         0x258 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td3 */
 218                         0x25c (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td2 */
 219                         0x260 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td1 */
 220                         0x264 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td0 */
 221                         0x268 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rclk */
 222                         0x26c (PIN_INPUT | MUX_MODE0)   /* rgmii1_rctl */
 223                         0x270 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd3 */
 224                         0x274 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd2 */
 225                         0x278 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd1 */
 226                         0x27c (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd0 */
 227
 228                         /* Slave 2 */
 229                         0x198 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_tclk */
 230                         0x19c (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_tctl */
 231                         0x1a0 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td3 */
 232                         0x1a4 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td2 */
 233                         0x1a8 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td1 */
 234                         0x1ac (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td0 */
 235                         0x1b0 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rclk */
 236                         0x1b4 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rctl */
 237                         0x1b8 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd3 */
 238                         0x1bc (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd2 */
 239                         0x1c0 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd1 */
 240                         0x1c4 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd0 */
 241                 >;
 242
 243         };
 244
 245         cpsw_pins_sleep: cpsw_pins_sleep {
 246                 pinctrl-single,pins = <
 247                         /* Slave 1 */
 248                         0x250 (PIN_INPUT | MUX_MODE15)
 249                         0x254 (PIN_INPUT | MUX_MODE15)
 250                         0x258 (PIN_INPUT | MUX_MODE15)
 251                         0x25c (PIN_INPUT | MUX_MODE15)
 252                         0x260 (PIN_INPUT | MUX_MODE15)
 253                         0x264 (PIN_INPUT | MUX_MODE15)
 254                         0x268 (PIN_INPUT | MUX_MODE15)
 255                         0x26c (PIN_INPUT | MUX_MODE15)
 256                         0x270 (PIN_INPUT | MUX_MODE15)
 257                         0x274 (PIN_INPUT | MUX_MODE15)
 258                         0x278 (PIN_INPUT | MUX_MODE15)
 259                         0x27c (PIN_INPUT | MUX_MODE15)
 260
 261                         /* Slave 2 */
 262                         0x198 (PIN_INPUT | MUX_MODE15)
 263                         0x19c (PIN_INPUT | MUX_MODE15)
 264                         0x1a0 (PIN_INPUT | MUX_MODE15)
 265                         0x1a4 (PIN_INPUT | MUX_MODE15)
 266                         0x1a8 (PIN_INPUT | MUX_MODE15)
 267                         0x1ac (PIN_INPUT | MUX_MODE15)
 268                         0x1b0 (PIN_INPUT | MUX_MODE15)
 269                         0x1b4 (PIN_INPUT | MUX_MODE15)
 270                         0x1b8 (PIN_INPUT | MUX_MODE15)
 271                         0x1bc (PIN_INPUT | MUX_MODE15)
 272                         0x1c0 (PIN_INPUT | MUX_MODE15)
 273                         0x1c4 (PIN_INPUT | MUX_MODE15)
 274                 >;
 275         };
 276
 277         davinci_mdio_pins_default: davinci_mdio_pins_default {
 278                 pinctrl-single,pins = <
 279                         /* MDIO */
 280                         0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* mdio_mclk */
 281                         0x240 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mdio_d */
 282                 >;
 283         };
 284
 285         davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 286                 pinctrl-single,pins = <
 287                         0x23c (PIN_INPUT | MUX_MODE15)
 288                         0x240 (PIN_INPUT | MUX_MODE15)
 289                 >;
 290         };
 291
 292         tps659038_pins_default: tps659038_pins_default {
 293                 pinctrl-single,pins = <
 294                         0x418 (PIN_INPUT_PULLUP | MUX_MODE14)   /* wakeup0.gpio1_0 */
 295                 >;
 296         };
 297
 298         tmp102_pins_default: tmp102_pins_default {
 299                 pinctrl-single,pins = <
 300                         0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)   /* spi2_d0.gpio7_16 */
 301                 >;
 302         };
 303
 304         mcp79410_pins_default: mcp79410_pins_default {
 305                 pinctrl-single,pins = <
 306                         0x424 (PIN_INPUT_PULLUP | MUX_MODE1)    /* wakeup3.sys_nirq1 */
 307                 >;
 308         };
 309
 310         usb1_pins: pinmux_usb1_pins {
 311                 pinctrl-single,pins = <
 312                         0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 313                 >;
 314         };
 315
 316         extcon_usb1_pins: extcon_usb1_pins {
 317                 pinctrl-single,pins = <
 318                         0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
 319                 >;
 320         };
 321
 322         tpd12s015_pins: pinmux_tpd12s015_pins {
 323                 pinctrl-single,pins = <
 324                         0x3b0 (PIN_OUTPUT | MUX_MODE14)         /* gpio7_10 CT_CP_HPD */
 325                         0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
 326                         0x370 (PIN_OUTPUT | MUX_MODE14)         /* gpio6_28 LS_OE */
 327                 >;
 328         };
 329 };
 330
 331 &i2c1 {
 332         status = "okay";
 333         pinctrl-names = "default";
 334         pinctrl-0 = <&i2c1_pins_default>;
 335         clock-frequency = <400000>;
 336
 337         tps659038: tps659038@58 {
 338                 compatible = "ti,tps659038";
 339                 reg = <0x58>;
 340                 interrupt-parent = <&gpio1>;
 341                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 342
 343                 pinctrl-names = "default";
 344                 pinctrl-0 = <&tps659038_pins_default>;
 345
 346                 #interrupt-cells = <2>;
 347                 interrupt-controller;
 348
 349                 ti,system-power-controller;
 350
 351                 tps659038_pmic {
 352                         compatible = "ti,tps659038-pmic";
 353
 354                         regulators {
 355                                 smps12_reg: smps12 {
 356                                         /* VDD_MPU */
 357                                         regulator-name = "smps12";
 358                                         regulator-min-microvolt = < 850000>;
 359                                         regulator-max-microvolt = <1250000>;
 360                                         regulator-always-on;
 361                                         regulator-boot-on;
 362                                 };
 363
 364                                 smps3_reg: smps3 {
 365                                         /* VDD_DDR */
 366                                         regulator-name = "smps3";
 367                                         regulator-min-microvolt = <1350000>;
 368                                         regulator-max-microvolt = <1350000>;
 369                                         regulator-always-on;
 370                                         regulator-boot-on;
 371                                 };
 372
 373                                 smps45_reg: smps45 {
 374                                         /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
 375                                         regulator-name = "smps45";
 376                                         regulator-min-microvolt = < 850000>;
 377                                         regulator-max-microvolt = <1150000>;
 378                                         regulator-always-on;
 379                                         regulator-boot-on;
 380                                 };
 381
 382                                 smps6_reg: smps6 {
 383                                         /* VDD_CORE */
 384                                         regulator-name = "smps6";
 385                                         regulator-min-microvolt = <850000>;
 386                                         regulator-max-microvolt = <1030000>;
 387                                         regulator-always-on;
 388                                         regulator-boot-on;
 389                                 };
 390
 391                                 /* SMPS7 unused */
 392
 393                                 smps8_reg: smps8 {
 394                                         /* VDD_1V8 */
 395                                         regulator-name = "smps8";
 396                                         regulator-min-microvolt = <1800000>;
 397                                         regulator-max-microvolt = <1800000>;
 398                                         regulator-always-on;
 399                                         regulator-boot-on;
 400                                 };
 401
 402                                 /* SMPS9 unused */
 403
 404                                 ldo1_reg: ldo1 {
 405                                         /* VDD_SD / VDDSHV8  */
 406                                         regulator-name = "ldo1";
 407                                         regulator-min-microvolt = <1800000>;
 408                                         regulator-max-microvolt = <3300000>;
 409                                         regulator-boot-on;
 410                                         regulator-always-on;
 411                                 };
 412
 413                                 ldo2_reg: ldo2 {
 414                                         /* VDD_SHV5 */
 415                                         regulator-name = "ldo2";
 416                                         regulator-min-microvolt = <3300000>;
 417                                         regulator-max-microvolt = <3300000>;
 418                                         regulator-always-on;
 419                                         regulator-boot-on;
 420                                 };
 421
 422                                 ldo3_reg: ldo3 {
 423                                         /* VDDA_1V8_PHYA */
 424                                         regulator-name = "ldo3";
 425                                         regulator-min-microvolt = <1800000>;
 426                                         regulator-max-microvolt = <1800000>;
 427                                         regulator-always-on;
 428                                         regulator-boot-on;
 429                                 };
 430
 431                                 ldo4_reg: ldo4 {
 432                                         /* VDDA_1V8_PHYB */
 433                                         regulator-name = "ldo4";
 434                                         regulator-min-microvolt = <1800000>;
 435                                         regulator-max-microvolt = <1800000>;
 436                                         regulator-always-on;
 437                                         regulator-boot-on;
 438                                 };
 439
 440                                 ldo9_reg: ldo9 {
 441                                         /* VDD_RTC */
 442                                         regulator-name = "ldo9";
 443                                         regulator-min-microvolt = <1050000>;
 444                                         regulator-max-microvolt = <1050000>;
 445                                         regulator-always-on;
 446                                         regulator-boot-on;
 447                                 };
 448
 449                                 ldoln_reg: ldoln {
 450                                         /* VDDA_1V8_PLL */
 451                                         regulator-name = "ldoln";
 452                                         regulator-min-microvolt = <1800000>;
 453                                         regulator-max-microvolt = <1800000>;
 454                                         regulator-always-on;
 455                                         regulator-boot-on;
 456                                 };
 457
 458                                 ldousb_reg: ldousb {
 459                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 460                                         regulator-name = "ldousb";
 461                                         regulator-min-microvolt = <3300000>;
 462                                         regulator-max-microvolt = <3300000>;
 463                                         regulator-boot-on;
 464                                 };
 465
 466                                 regen1: regen1 {
 467                                         /* VDD_3V3_ON */
 468                                         regulator-name = "regen1";
 469                                         regulator-boot-on;
 470                                         regulator-always-on;
 471                                 };
 472                         };
 473                 };
 474
 475                 tps659038_rtc: tps659038_rtc {
 476                         compatible = "ti,palmas-rtc";
 477                         interrupt-parent = <&tps659038>;
 478                         interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 479                         wakeup-source;
 480                 };
 481
 482                 tps659038_pwr_button: tps659038_pwr_button {
 483                         compatible = "ti,palmas-pwrbutton";
 484                         interrupt-parent = <&tps659038>;
 485                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 486                         wakeup-source;
 487                         ti,palmas-long-press-seconds = <12>;
 488                 };
 489
 490                 tps659038_gpio: tps659038_gpio {
 491                         compatible = "ti,palmas-gpio";
 492                         gpio-controller;
 493                         #gpio-cells = <2>;
 494                 };
 495
 496                 extcon_usb2: tps659038_usb {
 497                         compatible = "ti,palmas-usb-vid";
 498                         ti,enable-vbus-detection;
 499                         ti,enable-id-detection;
 500                         id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
 501                 };
 502
 503         };
 504
 505         tmp102: tmp102@48 {
 506                 compatible = "ti,tmp102";
 507                 reg = <0x48>;
 508                 pinctrl-names = "default";
 509                 pinctrl-0 = <&tmp102_pins_default>;
 510                 interrupt-parent = <&gpio7>;
 511                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 512                 #thermal-sensor-cells = <1>;
 513         };
 514 };
 515
 516 &i2c3 {
 517         status = "okay";
 518         pinctrl-names = "default";
 519         pinctrl-0 = <&i2c3_pins_default>;
 520         clock-frequency = <400000>;
 521
 522         mcp_rtc: rtc@6f {
 523                 compatible = "microchip,mcp7941x";
 524                 reg = <0x6f>;
 525                 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
 526                                       <&dra7_pmx_core 0x424>;
 527
 528                 pinctrl-names = "default";
 529                 pinctrl-0 = <&mcp79410_pins_default>;
 530
 531                 vcc-supply = <&vdd_3v3>;
 532                 wakeup-source;
 533         };
 534 };
 535
 536 &gpio7 {
 537         ti,no-reset-on-init;
 538         ti,no-idle-on-init;
 539 };
 540
 541 &cpu0 {
 542         cpu0-supply = <&smps12_reg>;
 543         voltage-tolerance = <1>;
 544 };
 545
 546 &uart3 {
 547         status = "okay";
 548         interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 549                               <&dra7_pmx_core 0x3f8>;
 550
 551         pinctrl-names = "default";
 552         pinctrl-0 = <&uart3_pins_default>;
 553 };
 554
 555 &mac {
 556         status = "okay";
 557         pinctrl-names = "default", "sleep";
 558         pinctrl-0 = <&cpsw_pins_default>;
 559         pinctrl-1 = <&cpsw_pins_sleep>;
 560         dual_emac;
 561 };
 562
 563 &cpsw_emac0 {
 564         phy_id = <&davinci_mdio>, <1>;
 565         phy-mode = "rgmii";
 566         dual_emac_res_vlan = <1>;
 567 };
 568
 569 &cpsw_emac1 {
 570         phy_id = <&davinci_mdio>, <2>;
 571         phy-mode = "rgmii";
 572         dual_emac_res_vlan = <2>;
 573 };
 574
 575 &davinci_mdio {
 576         pinctrl-names = "default", "sleep";
 577         pinctrl-0 = <&davinci_mdio_pins_default>;
 578         pinctrl-1 = <&davinci_mdio_pins_sleep>;
 579 };
 580
 581 &mmc1 {
 582         status = "okay";
 583
 584         pinctrl-names = "default";
 585         pinctrl-0 = <&mmc1_pins_default>;
 586
 587         vmmc-supply = <&ldo1_reg>;
 588         bus-width = <4>;
 589         cd-gpios = <&gpio6 27 0>; /* gpio 219 */
 590 };
 591
 592 &mmc2 {
 593         status = "okay";
 594
 595         pinctrl-names = "default";
 596         pinctrl-0 = <&mmc2_pins_default>;
 597
 598         vmmc-supply = <&vdd_3v3>;
 599         bus-width = <8>;
 600         ti,non-removable;
 601         cap-mmc-dual-data-rate;
 602 };
 603
 604 &sata {
 605         status = "okay";
 606 };
 607
 608 &usb2_phy1 {
 609         phy-supply = <&ldousb_reg>;
 610 };
 611
 612 &usb2_phy2 {
 613         phy-supply = <&ldousb_reg>;
 614 };
 615
 616 &usb1 {
 617         dr_mode = "host";
 618         pinctrl-names = "default";
 619         pinctrl-0 = <&usb1_pins>;
 620 };
 621
 622 &omap_dwc3_1 {
 623         extcon = <&extcon_usb1>;
 624 };
 625
 626 &omap_dwc3_2 {
 627         extcon = <&extcon_usb2>;
 628 };
 629
 630 &usb2 {
 631         /*
 632          * Stand alone usage is peripheral only.
 633          * However, with some resistor modifications
 634          * this port can be used via expansion connectors
 635          * as "host" or "dual-role". If so, provide
 636          * the necessary dr_mode override in the expansion
 637          * board's DT.
 638          */
 639         dr_mode = "peripheral";
 640 };
 641
 642 &cpu_trips {
 643         cpu_alert1: cpu_alert1 {
 644                 temperature = <50000>; /* millicelsius */
 645                 hysteresis = <2000>; /* millicelsius */
 646                 type = "active";
 647         };
 648 };
 649
 650 &cpu_cooling_maps {
 651         map1 {
 652                 trip = <&cpu_alert1>;
 653                 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 654         };
 655 };
 656
 657 &thermal_zones {
 658         board_thermal: board_thermal {
 659                 polling-delay-passive = <1250>; /* milliseconds */
 660                 polling-delay = <1500>; /* milliseconds */
 661
 662                                 /* sensor       ID */
 663                 thermal-sensors = <&tmp102     0>;
 664
 665                 board_trips: trips {
 666                         board_alert0: board_alert {
 667                                 temperature = <40000>; /* millicelsius */
 668                                 hysteresis = <2000>; /* millicelsius */
 669                                 type = "active";
 670                         };
 671
 672                         board_crit: board_crit {
 673                                 temperature = <105000>; /* millicelsius */
 674                                 hysteresis = <0>; /* millicelsius */
 675                                 type = "critical";
 676                         };
 677                 };
 678
 679                 board_cooling_maps: cooling-maps {
 680                         map0 {
 681                                 trip = <&board_alert0>;
 682                                 cooling-device =
 683                                   <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 684                         };
 685                 };
 686        };
 687 };
 688
 689 &dss {
 690         status = "ok";
 691
 692         vdda_video-supply = <&ldoln_reg>;
 693 };
 694
 695 &hdmi {
 696         status = "ok";
 697         vdda-supply = <&ldo4_reg>;
 698
 699         pinctrl-names = "default";
 700         pinctrl-0 = <&hdmi_pins>;
 701
 702         port {
 703                 hdmi_out: endpoint {
 704                         remote-endpoint = <&tpd12s015_in>;
 705                 };
 706         };
 707 };
 708
 709 &pcie1 {
 710         gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 711 };