arch/arm/boot/dts/am57xx-beagle-x15.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13
  14 / {
  15         model = "TI AM5728 BeagleBoard-X15";
  16         compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
  17
  18         aliases {
  19                 rtc0 = &mcp_rtc;
  20                 rtc1 = &tps659038_rtc;
  21                 rtc2 = &rtc;
  22                 display0 = &hdmi0;
  23         };
  24
  25         memory {
  26                 device_type = "memory";
  27                 reg = <0x80000000 0x80000000>;
  28         };
  29
  30         vdd_3v3: fixedregulator-vdd_3v3 {
  31                 compatible = "regulator-fixed";
  32                 regulator-name = "vdd_3v3";
  33                 vin-supply = <&regen1>;
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36         };
  37
  38         aic_dvdd: fixedregulator-aic_dvdd {
  39                 compatible = "regulator-fixed";
  40                 regulator-name = "aic_dvdd_fixed";
  41                 vin-supply = <&vdd_3v3>;
  42                 regulator-min-microvolt = <1800000>;
  43                 regulator-max-microvolt = <1800000>;
  44         };
  45
  46         vtt_fixed: fixedregulator-vtt {
  47                 /* TPS51200 */
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "vtt_fixed";
  50                 vin-supply = <&smps3_reg>;
  51                 regulator-min-microvolt = <3300000>;
  52                 regulator-max-microvolt = <3300000>;
  53                 regulator-always-on;
  54                 regulator-boot-on;
  55                 enable-active-high;
  56                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  57         };
  58
  59         leds {
  60                 compatible = "gpio-leds";
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&leds_pins_default>;
  63
  64                 led@0 {
  65                         label = "beagle-x15:usr0";
  66                         gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
  67                         linux,default-trigger = "heartbeat";
  68                         default-state = "off";
  69                 };
  70
  71                 led@1 {
  72                         label = "beagle-x15:usr1";
  73                         gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
  74                         linux,default-trigger = "cpu0";
  75                         default-state = "off";
  76                 };
  77
  78                 led@2 {
  79                         label = "beagle-x15:usr2";
  80                         gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
  81                         linux,default-trigger = "mmc0";
  82                         default-state = "off";
  83                 };
  84
  85                 led@3 {
  86                         label = "beagle-x15:usr3";
  87                         gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
  88                         linux,default-trigger = "ide-disk";
  89                         default-state = "off";
  90                 };
  91         };
  92
  93         gpio_fan: gpio_fan {
  94                 /* Based on 5v 500mA AFB02505HHB */
  95                 compatible = "gpio-fan";
  96                 gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
  97                 gpio-fan,speed-map = <0     0>,
  98                                      <13000 1>;
  99                 #cooling-cells = <2>;
 100         };
 101
 102         extcon_usb1: extcon_usb1 {
 103                 compatible = "linux,extcon-usb-gpio";
 104                 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
 105                 pinctrl-names = "default";
 106                 pinctrl-0 = <&extcon_usb1_pins>;
 107         };
 108
 109         hdmi0: connector {
 110                 compatible = "hdmi-connector";
 111                 label = "hdmi";
 112
 113                 type = "a";
 114
 115                 port {
 116                         hdmi_connector_in: endpoint {
 117                                 remote-endpoint = <&tpd12s015_out>;
 118                         };
 119                 };
 120         };
 121
 122         tpd12s015: encoder {
 123                 compatible = "ti,tpd12s015";
 124
 125                 pinctrl-names = "default";
 126                 pinctrl-0 = <&tpd12s015_pins>;
 127
 128                 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
 129                         <&gpio6 28 GPIO_ACTIVE_HIGH>,   /* gpio6_28, LS OE */
 130                         <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
 131
 132                 ports {
 133                         #address-cells = <1>;
 134                         #size-cells = <0>;
 135
 136                         port@0 {
 137                                 reg = <0>;
 138
 139                                 tpd12s015_in: endpoint {
 140                                         remote-endpoint = <&hdmi_out>;
 141                                 };
 142                         };
 143
 144                         port@1 {
 145                                 reg = <1>;
 146
 147                                 tpd12s015_out: endpoint {
 148                                         remote-endpoint = <&hdmi_connector_in>;
 149                                 };
 150                         };
 151                 };
 152         };
 153
 154         sound0: sound@0 {
 155                 compatible = "simple-audio-card";
 156                 simple-audio-card,name = "BeagleBoard-X15";
 157                 simple-audio-card,widgets =
 158                         "Line", "Line Out",
 159                         "Line", "Line In";
 160                 simple-audio-card,routing =
 161                         "Line Out",     "LLOUT",
 162                         "Line Out",     "RLOUT",
 163                         "MIC2L",        "Line In",
 164                         "MIC2R",        "Line In";
 165                 simple-audio-card,format = "dsp_b";
 166                 simple-audio-card,bitclock-master = <&sound0_master>;
 167                 simple-audio-card,frame-master = <&sound0_master>;
 168                 simple-audio-card,bitclock-inversion;
 169
 170                 simple-audio-card,cpu {
 171                         sound-dai = <&mcasp3>;
 172                 };
 173
 174                 sound0_master: simple-audio-card,codec {
 175                         sound-dai = <&tlv320aic3104>;
 176                         clocks = <&clkout2_clk>;
 177                 };
 178         };
 179 };
 180
 181 &dra7_pmx_core {
 182         leds_pins_default: leds_pins_default {
 183                 pinctrl-single,pins = <
 184                         0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
 185                         0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
 186                         0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
 187                         0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
 188                 >;
 189         };
 190
 191         i2c1_pins_default: i2c1_pins_default {
 192                 pinctrl-single,pins = <
 193                         0x400 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.sda */
 194                         0x404 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.scl */
 195                 >;
 196         };
 197
 198         hdmi_pins: pinmux_hdmi_pins {
 199                 pinctrl-single,pins = <
 200                         0x408 (PIN_INPUT | MUX_MODE1)   /* i2c2_sda.hdmi1_ddc_scl */
 201                         0x40c (PIN_INPUT | MUX_MODE1)   /* i2c2_scl.hdmi1_ddc_sda */
 202                 >;
 203         };
 204
 205         i2c3_pins_default: i2c3_pins_default {
 206                 pinctrl-single,pins = <
 207                         0x2a4 (PIN_INPUT| MUX_MODE10)   /* mcasp1_aclkx.i2c3_sda */
 208                         0x2a8 (PIN_INPUT| MUX_MODE10)   /* mcasp1_fsx.i2c3_scl */
 209                 >;
 210         };
 211
 212         uart3_pins_default: uart3_pins_default {
 213                 pinctrl-single,pins = <
 214                         0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
 215                         0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 216                 >;
 217         };
 218
 219         mmc1_pins_default: mmc1_pins_default {
 220                 pinctrl-single,pins = <
 221                         0x36c (PIN_INPUT | MUX_MODE14)  /* mmc1sdcd.gpio219 */
 222                         0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 223                         0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
 224                         0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
 225                         0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
 226                         0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
 227                         0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 228                 >;
 229         };
 230
 231         mmc2_pins_default: mmc2_pins_default {
 232                 pinctrl-single,pins = <
 233                         0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 234                         0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 235                         0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 236                         0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 237                         0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 238                         0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 239                         0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 240                         0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 241                         0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 242                         0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 243                 >;
 244         };
 245
 246         cpsw_pins_default: cpsw_pins_default {
 247                 pinctrl-single,pins = <
 248                         /* Slave 1 */
 249                         0x250 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_tclk */
 250                         0x254 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_tctl */
 251                         0x258 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td3 */
 252                         0x25c (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td2 */
 253                         0x260 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td1 */
 254                         0x264 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td0 */
 255                         0x268 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rclk */
 256                         0x26c (PIN_INPUT | MUX_MODE0)   /* rgmii1_rctl */
 257                         0x270 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd3 */
 258                         0x274 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd2 */
 259                         0x278 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd1 */
 260                         0x27c (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd0 */
 261
 262                         /* Slave 2 */
 263                         0x198 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_tclk */
 264                         0x19c (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_tctl */
 265                         0x1a0 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td3 */
 266                         0x1a4 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td2 */
 267                         0x1a8 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td1 */
 268                         0x1ac (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td0 */
 269                         0x1b0 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rclk */
 270                         0x1b4 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rctl */
 271                         0x1b8 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd3 */
 272                         0x1bc (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd2 */
 273                         0x1c0 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd1 */
 274                         0x1c4 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd0 */
 275                 >;
 276
 277         };
 278
 279         cpsw_pins_sleep: cpsw_pins_sleep {
 280                 pinctrl-single,pins = <
 281                         /* Slave 1 */
 282                         0x250 (PIN_INPUT | MUX_MODE15)
 283                         0x254 (PIN_INPUT | MUX_MODE15)
 284                         0x258 (PIN_INPUT | MUX_MODE15)
 285                         0x25c (PIN_INPUT | MUX_MODE15)
 286                         0x260 (PIN_INPUT | MUX_MODE15)
 287                         0x264 (PIN_INPUT | MUX_MODE15)
 288                         0x268 (PIN_INPUT | MUX_MODE15)
 289                         0x26c (PIN_INPUT | MUX_MODE15)
 290                         0x270 (PIN_INPUT | MUX_MODE15)
 291                         0x274 (PIN_INPUT | MUX_MODE15)
 292                         0x278 (PIN_INPUT | MUX_MODE15)
 293                         0x27c (PIN_INPUT | MUX_MODE15)
 294
 295                         /* Slave 2 */
 296                         0x198 (PIN_INPUT | MUX_MODE15)
 297                         0x19c (PIN_INPUT | MUX_MODE15)
 298                         0x1a0 (PIN_INPUT | MUX_MODE15)
 299                         0x1a4 (PIN_INPUT | MUX_MODE15)
 300                         0x1a8 (PIN_INPUT | MUX_MODE15)
 301                         0x1ac (PIN_INPUT | MUX_MODE15)
 302                         0x1b0 (PIN_INPUT | MUX_MODE15)
 303                         0x1b4 (PIN_INPUT | MUX_MODE15)
 304                         0x1b8 (PIN_INPUT | MUX_MODE15)
 305                         0x1bc (PIN_INPUT | MUX_MODE15)
 306                         0x1c0 (PIN_INPUT | MUX_MODE15)
 307                         0x1c4 (PIN_INPUT | MUX_MODE15)
 308                 >;
 309         };
 310
 311         davinci_mdio_pins_default: davinci_mdio_pins_default {
 312                 pinctrl-single,pins = <
 313                         /* MDIO */
 314                         0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* mdio_mclk */
 315                         0x240 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mdio_d */
 316                 >;
 317         };
 318
 319         davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 320                 pinctrl-single,pins = <
 321                         0x23c (PIN_INPUT | MUX_MODE15)
 322                         0x240 (PIN_INPUT | MUX_MODE15)
 323                 >;
 324         };
 325
 326         tps659038_pins_default: tps659038_pins_default {
 327                 pinctrl-single,pins = <
 328                         0x418 (PIN_INPUT_PULLUP | MUX_MODE14)   /* wakeup0.gpio1_0 */
 329                 >;
 330         };
 331
 332         tmp102_pins_default: tmp102_pins_default {
 333                 pinctrl-single,pins = <
 334                         0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)   /* spi2_d0.gpio7_16 */
 335                 >;
 336         };
 337
 338         mcp79410_pins_default: mcp79410_pins_default {
 339                 pinctrl-single,pins = <
 340                         0x424 (PIN_INPUT_PULLUP | MUX_MODE1)    /* wakeup3.sys_nirq1 */
 341                 >;
 342         };
 343
 344         usb1_pins: pinmux_usb1_pins {
 345                 pinctrl-single,pins = <
 346                         0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 347                 >;
 348         };
 349
 350         extcon_usb1_pins: extcon_usb1_pins {
 351                 pinctrl-single,pins = <
 352                         0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
 353                 >;
 354         };
 355
 356         tpd12s015_pins: pinmux_tpd12s015_pins {
 357                 pinctrl-single,pins = <
 358                         0x3b0 (PIN_OUTPUT | MUX_MODE14)         /* gpio7_10 CT_CP_HPD */
 359                         0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
 360                         0x370 (PIN_OUTPUT | MUX_MODE14)         /* gpio6_28 LS_OE */
 361                 >;
 362         };
 363
 364         clkout2_pins_default: clkout2_pins_default {
 365                 pinctrl-single,pins = <
 366                         0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
 367                 >;
 368         };
 369
 370         clkout2_pins_sleep: clkout2_pins_sleep {
 371                 pinctrl-single,pins = <
 372                         0x294 (PIN_INPUT | MUX_MODE15)  /* xref_clk0.clkout2 */
 373                 >;
 374         };
 375
 376         mcasp3_pins_default: mcasp3_pins_default {
 377                 pinctrl-single,pins = <
 378                         0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
 379                         0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
 380                         0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
 381                         0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
 382                 >;
 383         };
 384
 385         mcasp3_pins_sleep: mcasp3_pins_sleep {
 386                 pinctrl-single,pins = <
 387                         0x324 (PIN_INPUT | MUX_MODE15)
 388                         0x328 (PIN_INPUT | MUX_MODE15)
 389                         0x32c (PIN_INPUT | MUX_MODE15)
 390                         0x330 (PIN_INPUT | MUX_MODE15)
 391                 >;
 392         };
 393 };
 394
 395 &i2c1 {
 396         status = "okay";
 397         pinctrl-names = "default";
 398         pinctrl-0 = <&i2c1_pins_default>;
 399         clock-frequency = <400000>;
 400
 401         tps659038: tps659038@58 {
 402                 compatible = "ti,tps659038";
 403                 reg = <0x58>;
 404                 interrupt-parent = <&gpio1>;
 405                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 406
 407                 pinctrl-names = "default";
 408                 pinctrl-0 = <&tps659038_pins_default>;
 409
 410                 #interrupt-cells = <2>;
 411                 interrupt-controller;
 412
 413                 ti,system-power-controller;
 414
 415                 tps659038_pmic {
 416                         compatible = "ti,tps659038-pmic";
 417
 418                         regulators {
 419                                 smps12_reg: smps12 {
 420                                         /* VDD_MPU */
 421                                         regulator-name = "smps12";
 422                                         regulator-min-microvolt = < 850000>;
 423                                         regulator-max-microvolt = <1250000>;
 424                                         regulator-always-on;
 425                                         regulator-boot-on;
 426                                 };
 427
 428                                 smps3_reg: smps3 {
 429                                         /* VDD_DDR */
 430                                         regulator-name = "smps3";
 431                                         regulator-min-microvolt = <1350000>;
 432                                         regulator-max-microvolt = <1350000>;
 433                                         regulator-always-on;
 434                                         regulator-boot-on;
 435                                 };
 436
 437                                 smps45_reg: smps45 {
 438                                         /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
 439                                         regulator-name = "smps45";
 440                                         regulator-min-microvolt = < 850000>;
 441                                         regulator-max-microvolt = <1150000>;
 442                                         regulator-always-on;
 443                                         regulator-boot-on;
 444                                 };
 445
 446                                 smps6_reg: smps6 {
 447                                         /* VDD_CORE */
 448                                         regulator-name = "smps6";
 449                                         regulator-min-microvolt = <850000>;
 450                                         regulator-max-microvolt = <1030000>;
 451                                         regulator-always-on;
 452                                         regulator-boot-on;
 453                                 };
 454
 455                                 /* SMPS7 unused */
 456
 457                                 smps8_reg: smps8 {
 458                                         /* VDD_1V8 */
 459                                         regulator-name = "smps8";
 460                                         regulator-min-microvolt = <1800000>;
 461                                         regulator-max-microvolt = <1800000>;
 462                                         regulator-always-on;
 463                                         regulator-boot-on;
 464                                 };
 465
 466                                 /* SMPS9 unused */
 467
 468                                 ldo1_reg: ldo1 {
 469                                         /* VDD_SD / VDDSHV8  */
 470                                         regulator-name = "ldo1";
 471                                         regulator-min-microvolt = <1800000>;
 472                                         regulator-max-microvolt = <3300000>;
 473                                         regulator-boot-on;
 474                                         regulator-always-on;
 475                                 };
 476
 477                                 ldo2_reg: ldo2 {
 478                                         /* VDD_SHV5 */
 479                                         regulator-name = "ldo2";
 480                                         regulator-min-microvolt = <3300000>;
 481                                         regulator-max-microvolt = <3300000>;
 482                                         regulator-always-on;
 483                                         regulator-boot-on;
 484                                 };
 485
 486                                 ldo3_reg: ldo3 {
 487                                         /* VDDA_1V8_PHYA */
 488                                         regulator-name = "ldo3";
 489                                         regulator-min-microvolt = <1800000>;
 490                                         regulator-max-microvolt = <1800000>;
 491                                         regulator-always-on;
 492                                         regulator-boot-on;
 493                                 };
 494
 495                                 ldo4_reg: ldo4 {
 496                                         /* VDDA_1V8_PHYB */
 497                                         regulator-name = "ldo4";
 498                                         regulator-min-microvolt = <1800000>;
 499                                         regulator-max-microvolt = <1800000>;
 500                                         regulator-always-on;
 501                                         regulator-boot-on;
 502                                 };
 503
 504                                 ldo9_reg: ldo9 {
 505                                         /* VDD_RTC */
 506                                         regulator-name = "ldo9";
 507                                         regulator-min-microvolt = <1050000>;
 508                                         regulator-max-microvolt = <1050000>;
 509                                         regulator-always-on;
 510                                         regulator-boot-on;
 511                                 };
 512
 513                                 ldoln_reg: ldoln {
 514                                         /* VDDA_1V8_PLL */
 515                                         regulator-name = "ldoln";
 516                                         regulator-min-microvolt = <1800000>;
 517                                         regulator-max-microvolt = <1800000>;
 518                                         regulator-always-on;
 519                                         regulator-boot-on;
 520                                 };
 521
 522                                 ldousb_reg: ldousb {
 523                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 524                                         regulator-name = "ldousb";
 525                                         regulator-min-microvolt = <3300000>;
 526                                         regulator-max-microvolt = <3300000>;
 527                                         regulator-boot-on;
 528                                 };
 529
 530                                 regen1: regen1 {
 531                                         /* VDD_3V3_ON */
 532                                         regulator-name = "regen1";
 533                                         regulator-boot-on;
 534                                         regulator-always-on;
 535                                 };
 536                         };
 537                 };
 538
 539                 tps659038_rtc: tps659038_rtc {
 540                         compatible = "ti,palmas-rtc";
 541                         interrupt-parent = <&tps659038>;
 542                         interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 543                         wakeup-source;
 544                 };
 545
 546                 tps659038_pwr_button: tps659038_pwr_button {
 547                         compatible = "ti,palmas-pwrbutton";
 548                         interrupt-parent = <&tps659038>;
 549                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 550                         wakeup-source;
 551                         ti,palmas-long-press-seconds = <12>;
 552                 };
 553
 554                 tps659038_gpio: tps659038_gpio {
 555                         compatible = "ti,palmas-gpio";
 556                         gpio-controller;
 557                         #gpio-cells = <2>;
 558                 };
 559
 560                 extcon_usb2: tps659038_usb {
 561                         compatible = "ti,palmas-usb-vid";
 562                         ti,enable-vbus-detection;
 563                         ti,enable-id-detection;
 564                         id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
 565                 };
 566
 567         };
 568
 569         tmp102: tmp102@48 {
 570                 compatible = "ti,tmp102";
 571                 reg = <0x48>;
 572                 pinctrl-names = "default";
 573                 pinctrl-0 = <&tmp102_pins_default>;
 574                 interrupt-parent = <&gpio7>;
 575                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 576                 #thermal-sensor-cells = <1>;
 577         };
 578
 579         tlv320aic3104: tlv320aic3104@18 {
 580                 #sound-dai-cells = <0>;
 581                 compatible = "ti,tlv320aic3104";
 582                 reg = <0x18>;
 583                 pinctrl-names = "default", "sleep";
 584                 pinctrl-0 = <&clkout2_pins_default>;
 585                 pinctrl-1 = <&clkout2_pins_sleep>;
 586                 status = "okay";
 587                 adc-settle-ms = <40>;
 588
 589                 AVDD-supply = <&vdd_3v3>;
 590                 IOVDD-supply = <&vdd_3v3>;
 591                 DRVDD-supply = <&vdd_3v3>;
 592                 DVDD-supply = <&aic_dvdd>;
 593         };
 594 };
 595
 596 &i2c3 {
 597         status = "okay";
 598         pinctrl-names = "default";
 599         pinctrl-0 = <&i2c3_pins_default>;
 600         clock-frequency = <400000>;
 601
 602         mcp_rtc: rtc@6f {
 603                 compatible = "microchip,mcp7941x";
 604                 reg = <0x6f>;
 605                 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
 606                                       <&dra7_pmx_core 0x424>;
 607
 608                 pinctrl-names = "default";
 609                 pinctrl-0 = <&mcp79410_pins_default>;
 610
 611                 vcc-supply = <&vdd_3v3>;
 612                 wakeup-source;
 613         };
 614 };
 615
 616 &gpio7 {
 617         ti,no-reset-on-init;
 618         ti,no-idle-on-init;
 619 };
 620
 621 &cpu0 {
 622         cpu0-supply = <&smps12_reg>;
 623         voltage-tolerance = <1>;
 624 };
 625
 626 &uart3 {
 627         status = "okay";
 628         interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 629                               <&dra7_pmx_core 0x3f8>;
 630
 631         pinctrl-names = "default";
 632         pinctrl-0 = <&uart3_pins_default>;
 633 };
 634
 635 &mac {
 636         status = "okay";
 637         pinctrl-names = "default", "sleep";
 638         pinctrl-0 = <&cpsw_pins_default>;
 639         pinctrl-1 = <&cpsw_pins_sleep>;
 640         dual_emac;
 641 };
 642
 643 &cpsw_emac0 {
 644         phy_id = <&davinci_mdio>, <1>;
 645         phy-mode = "rgmii";
 646         dual_emac_res_vlan = <1>;
 647 };
 648
 649 &cpsw_emac1 {
 650         phy_id = <&davinci_mdio>, <2>;
 651         phy-mode = "rgmii";
 652         dual_emac_res_vlan = <2>;
 653 };
 654
 655 &davinci_mdio {
 656         pinctrl-names = "default", "sleep";
 657         pinctrl-0 = <&davinci_mdio_pins_default>;
 658         pinctrl-1 = <&davinci_mdio_pins_sleep>;
 659 };
 660
 661 &mmc1 {
 662         status = "okay";
 663
 664         pinctrl-names = "default";
 665         pinctrl-0 = <&mmc1_pins_default>;
 666
 667         vmmc-supply = <&ldo1_reg>;
 668         bus-width = <4>;
 669         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 670 };
 671
 672 &mmc2 {
 673         status = "okay";
 674
 675         pinctrl-names = "default";
 676         pinctrl-0 = <&mmc2_pins_default>;
 677
 678         vmmc-supply = <&vdd_3v3>;
 679         bus-width = <8>;
 680         ti,non-removable;
 681         cap-mmc-dual-data-rate;
 682 };
 683
 684 &sata {
 685         status = "okay";
 686 };
 687
 688 &usb2_phy1 {
 689         phy-supply = <&ldousb_reg>;
 690 };
 691
 692 &usb2_phy2 {
 693         phy-supply = <&ldousb_reg>;
 694 };
 695
 696 &usb1 {
 697         dr_mode = "host";
 698         pinctrl-names = "default";
 699         pinctrl-0 = <&usb1_pins>;
 700 };
 701
 702 &omap_dwc3_1 {
 703         extcon = <&extcon_usb1>;
 704 };
 705
 706 &omap_dwc3_2 {
 707         extcon = <&extcon_usb2>;
 708 };
 709
 710 &usb2 {
 711         /*
 712          * Stand alone usage is peripheral only.
 713          * However, with some resistor modifications
 714          * this port can be used via expansion connectors
 715          * as "host" or "dual-role". If so, provide
 716          * the necessary dr_mode override in the expansion
 717          * board's DT.
 718          */
 719         dr_mode = "peripheral";
 720 };
 721
 722 &cpu_trips {
 723         cpu_alert1: cpu_alert1 {
 724                 temperature = <50000>; /* millicelsius */
 725                 hysteresis = <2000>; /* millicelsius */
 726                 type = "active";
 727         };
 728 };
 729
 730 &cpu_cooling_maps {
 731         map1 {
 732                 trip = <&cpu_alert1>;
 733                 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 734         };
 735 };
 736
 737 &thermal_zones {
 738         board_thermal: board_thermal {
 739                 polling-delay-passive = <1250>; /* milliseconds */
 740                 polling-delay = <1500>; /* milliseconds */
 741
 742                                 /* sensor       ID */
 743                 thermal-sensors = <&tmp102     0>;
 744
 745                 board_trips: trips {
 746                         board_alert0: board_alert {
 747                                 temperature = <40000>; /* millicelsius */
 748                                 hysteresis = <2000>; /* millicelsius */
 749                                 type = "active";
 750                         };
 751
 752                         board_crit: board_crit {
 753                                 temperature = <105000>; /* millicelsius */
 754                                 hysteresis = <0>; /* millicelsius */
 755                                 type = "critical";
 756                         };
 757                 };
 758
 759                 board_cooling_maps: cooling-maps {
 760                         map0 {
 761                                 trip = <&board_alert0>;
 762                                 cooling-device =
 763                                   <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 764                         };
 765                 };
 766        };
 767 };
 768
 769 &dss {
 770         status = "ok";
 771
 772         vdda_video-supply = <&ldoln_reg>;
 773 };
 774
 775 &hdmi {
 776         status = "ok";
 777         vdda-supply = <&ldo4_reg>;
 778
 779         pinctrl-names = "default";
 780         pinctrl-0 = <&hdmi_pins>;
 781
 782         port {
 783                 hdmi_out: endpoint {
 784                         remote-endpoint = <&tpd12s015_in>;
 785                 };
 786         };
 787 };
 788
 789 &pcie1 {
 790         gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 791 };
 792
 793 &mcasp3 {
 794         #sound-dai-cells = <0>;
 795         pinctrl-names = "default", "sleep";
 796         pinctrl-0 = <&mcasp3_pins_default>;
 797         pinctrl-1 = <&mcasp3_pins_sleep>;
 798         status = "okay";
 799
 800         op-mode = <0>;  /* MCASP_IIS_MODE */
 801         tdm-slots = <2>;
 802         /* 4 serializers */
 803         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 804                 1 2 0 0
 805         >;
 806 };
 807
 808 &mailbox5 {
 809         status = "okay";
 810         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
 811                 status = "okay";
 812         };
 813         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 814                 status = "okay";
 815         };
 816 };
 817
 818 &mailbox6 {
 819         status = "okay";
 820         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 821                 status = "okay";
 822         };
 823         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 824                 status = "okay";
 825         };
 826 };