arch/arm/boot/dts/armada-370-db.dts

   1 /*
   2  * Device Tree file for Marvell Armada 370 evaluation board
   3  * (DB-88F6710-BP-DDR3)
   4  *
   5  *  Copyright (C) 2012 Marvell
   6  *
   7  * Lior Amsalem <alior@marvell.com>
   8  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   9  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  10  *
  11  * This file is dual-licensed: you can use it either under the terms
  12  * of the GPL or the X11 license, at your option. Note that this dual
  13  * licensing only applies to this file, and not this project as a
  14  * whole.
  15  *
  16  *  a) This file is free software; you can redistribute it and/or
  17  *     modify it under the terms of the GNU General Public License as
  18  *     published by the Free Software Foundation; either version 2 of the
  19  *     License, or (at your option) any later version.
  20  *
  21  *     This file is distributed in the hope that it will be useful
  22  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  *     GNU General Public License for more details.
  25  *
  26  * Or, alternatively
  27  *
  28  *  b) Permission is hereby granted, free of charge, to any person
  29  *     obtaining a copy of this software and associated documentation
  30  *     files (the "Software"), to deal in the Software without
  31  *     restriction, including without limitation the rights to use
  32  *     copy, modify, merge, publish, distribute, sublicense, and/or
  33  *     sell copies of the Software, and to permit persons to whom the
  34  *     Software is furnished to do so, subject to the following
  35  *     conditions:
  36  *
  37  *     The above copyright notice and this permission notice shall be
  38  *     included in all copies or substantial portions of the Software.
  39  *
  40  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  41  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  42  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  43  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  44  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  45  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  46  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  47  *     OTHER DEALINGS IN THE SOFTWARE.
  48  *
  49  * Note: this Device Tree assumes that the bootloader has remapped the
  50  * internal registers to 0xf1000000 (instead of the default
  51  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  52  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  53  * boards were delivered with an older version of the bootloader that
  54  * left internal registers mapped at 0xd0000000. If you are in this
  55  * situation, you should either update your bootloader (preferred
  56  * solution) or the below Device Tree should be adjusted.
  57  */
  58
  59 /dts-v1/;
  60 #include "armada-370.dtsi"
  61
  62 / {
  63         model = "Marvell Armada 370 Evaluation Board";
  64         compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
  65
  66         chosen {
  67                 stdout-path = "serial0:115200n8";
  68         };
  69
  70         memory {
  71                 device_type = "memory";
  72                 reg = <0x00000000 0x40000000>; /* 1 GB */
  73         };
  74
  75         soc {
  76                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  77                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
  78                           MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
  79
  80                 internal-regs {
  81                         serial@12000 {
  82                                 status = "okay";
  83                         };
  84                         sata@a0000 {
  85                                 nr-ports = <2>;
  86                                 status = "okay";
  87                         };
  88
  89                         mdio {
  90                                 pinctrl-0 = <&mdio_pins>;
  91                                 pinctrl-names = "default";
  92                                 phy0: ethernet-phy@0 {
  93                                         reg = <0>;
  94                                 };
  95
  96                                 phy1: ethernet-phy@1 {
  97                                         reg = <1>;
  98                                 };
  99                         };
 100
 101                         ethernet@70000 {
 102                                 pinctrl-0 = <&ge0_rgmii_pins>;
 103                                 pinctrl-names = "default";
 104                                 status = "okay";
 105                                 phy = <&phy0>;
 106                                 phy-mode = "rgmii-id";
 107                         };
 108                         ethernet@74000 {
 109                                 pinctrl-0 = <&ge1_rgmii_pins>;
 110                                 pinctrl-names = "default";
 111                                 status = "okay";
 112                                 phy = <&phy1>;
 113                                 phy-mode = "rgmii-id";
 114                         };
 115
 116                         i2c@11000 {
 117                                 pinctrl-0 = <&i2c0_pins>;
 118                                 pinctrl-names = "default";
 119                                 clock-frequency = <100000>;
 120                                 status = "okay";
 121                                 audio_codec: audio-codec@4a {
 122                                         #sound-dai-cells = <0>;
 123                                         compatible = "cirrus,cs42l51";
 124                                         reg = <0x4a>;
 125                                 };
 126                         };
 127
 128                         audio-controller@30000 {
 129                                 pinctrl-0 = <&i2s_pins2>;
 130                                 pinctrl-names = "default";
 131                                 status = "okay";
 132                         };
 133
 134                         mvsdio@d4000 {
 135                                 pinctrl-0 = <&sdio_pins1>;
 136                                 pinctrl-names = "default";
 137                                 /*
 138                                  * This device is disabled by default, because
 139                                  * using the SD card connector requires
 140                                  * changing the default CON40 connector
 141                                  * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
 142                                  * different connector
 143                                  * "DB-88F6710_MPP_RGMII_SD_Jumper".
 144                                  */
 145                                 status = "disabled";
 146                                 /* No CD or WP GPIOs */
 147                                 broken-cd;
 148                         };
 149
 150                         usb@50000 {
 151                                 status = "okay";
 152                         };
 153
 154                         usb@51000 {
 155                                 status = "okay";
 156                         };
 157
 158                         spi0: spi@10600 {
 159                                 pinctrl-0 = <&spi0_pins2>;
 160                                 pinctrl-names = "default";
 161                                 status = "okay";
 162
 163                                 spi-flash@0 {
 164                                         #address-cells = <1>;
 165                                         #size-cells = <1>;
 166                                         compatible = "mx25l25635e", "jedec,spi-nor";
 167                                         reg = <0>; /* Chip select 0 */
 168                                         spi-max-frequency = <50000000>;
 169                                 };
 170                         };
 171                 };
 172
 173                 pcie-controller {
 174                         status = "okay";
 175                         /*
 176                          * The two PCIe units are accessible through
 177                          * both standard PCIe slots and mini-PCIe
 178                          * slots on the board.
 179                          */
 180                         pcie@1,0 {
 181                                 /* Port 0, Lane 0 */
 182                                 status = "okay";
 183                         };
 184
 185                         pcie@2,0 {
 186                                 /* Port 1, Lane 0 */
 187                                 status = "okay";
 188                         };
 189                 };
 190         };
 191
 192         sound {
 193                 compatible = "simple-audio-card";
 194                 simple-audio-card,name = "Armada 370 DB Audio";
 195                 simple-audio-card,mclk-fs = <256>;
 196                 simple-audio-card,widgets =
 197                         "Headphone", "Out Jack",
 198                         "Line", "In Jack";
 199                 simple-audio-card,routing =
 200                         "Out Jack", "HPL",
 201                         "Out Jack", "HPR",
 202                         "AIN1L", "In Jack",
 203                         "AIN1L", "In Jack";
 204                 status = "okay";
 205
 206                 simple-audio-card,dai-link@0 {
 207                         format = "i2s";
 208                         cpu {
 209                                 sound-dai = <&audio_controller 0>;
 210                         };
 211
 212                         codec {
 213                                 sound-dai = <&audio_codec>;
 214                         };
 215                 };
 216
 217                 simple-audio-card,dai-link@1 {
 218                         format = "i2s";
 219                         cpu {
 220                                 sound-dai = <&audio_controller 1>;
 221                         };
 222
 223                         codec {
 224                                 sound-dai = <&spdif_out>;
 225                         };
 226                 };
 227
 228                 simple-audio-card,dai-link@2 {
 229                         format = "i2s";
 230                         cpu {
 231                                 sound-dai = <&audio_controller 1>;
 232                         };
 233
 234                         codec {
 235                                 sound-dai = <&spdif_in>;
 236                         };
 237                 };
 238         };
 239
 240         spdif_out: spdif-out {
 241                 #sound-dai-cells = <0>;
 242                 compatible = "linux,spdif-dit";
 243         };
 244
 245         spdif_in: spdif-in {
 246                 #sound-dai-cells = <0>;
 247                 compatible = "linux,spdif-dir";
 248         };
 249 };