arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

   1 /*
   2  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         model = "Phytec phyFLEX-i.MX6 Quad";
  16         compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
  17
  18         memory {
  19                 reg = <0x10000000 0x80000000>;
  20         };
  21
  22         regulators {
  23                 compatible = "simple-bus";
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 reg_usb_otg_vbus: regulator@0 {
  28                         compatible = "regulator-fixed";
  29                         reg = <0>;
  30                         regulator-name = "usb_otg_vbus";
  31                         regulator-min-microvolt = <5000000>;
  32                         regulator-max-microvolt = <5000000>;
  33                         gpio = <&gpio4 15 0>;
  34                         enable-active-high;
  35                 };
  36
  37                 reg_usb_h1_vbus: regulator@1 {
  38                         compatible = "regulator-fixed";
  39                         reg = <1>;
  40                         regulator-name = "usb_h1_vbus";
  41                         regulator-min-microvolt = <5000000>;
  42                         regulator-max-microvolt = <5000000>;
  43                         gpio = <&gpio1 0 0>;
  44                         enable-active-high;
  45                 };
  46         };
  47
  48         gpio_leds: leds {
  49                 compatible = "gpio-leds";
  50
  51                 green {
  52                         label = "phyflex:green";
  53                         gpios = <&gpio1 30 0>;
  54                 };
  55
  56                 red {
  57                         label = "phyflex:red";
  58                         gpios = <&gpio2 31 0>;
  59                 };
  60         };
  61 };
  62
  63 &audmux {
  64         pinctrl-names = "default";
  65         pinctrl-0 = <&pinctrl_audmux>;
  66         status = "disabled";
  67 };
  68
  69 &can1 {
  70         pinctrl-names = "default";
  71         pinctrl-0 = <&pinctrl_flexcan1>;
  72         status = "disabled";
  73 };
  74
  75 &ecspi3 {
  76         pinctrl-names = "default";
  77         pinctrl-0 = <&pinctrl_ecspi3>;
  78         status = "okay";
  79         fsl,spi-num-chipselects = <1>;
  80         cs-gpios = <&gpio4 24 0>;
  81
  82         flash@0 {
  83                 compatible = "m25p80", "jedec,spi-nor";
  84                 spi-max-frequency = <20000000>;
  85                 reg = <0>;
  86         };
  87 };
  88
  89 &fec {
  90         pinctrl-names = "default";
  91         pinctrl-0 = <&pinctrl_enet>;
  92         phy-mode = "rgmii";
  93         phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
  94         phy-supply = <&vdd_eth_io_reg>;
  95         status = "disabled";
  96 };
  97
  98 &gpmi {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_gpmi_nand>;
 101         nand-on-flash-bbt;
 102         status = "okay";
 103 };
 104
 105 &i2c1 {
 106         pinctrl-names = "default";
 107         pinctrl-0 = <&pinctrl_i2c1>;
 108         status = "okay";
 109
 110         eeprom@50 {
 111                 compatible = "atmel,24c32";
 112                 reg = <0x50>;
 113         };
 114
 115         pmic@58 {
 116                 compatible = "dlg,da9063";
 117                 reg = <0x58>;
 118                 interrupt-parent = <&gpio2>;
 119                 interrupts = <9 0x8>; /* active-low GPIO2_9 */
 120
 121                 regulators {
 122                         vddcore_reg: bcore1 {
 123                                 regulator-min-microvolt = <730000>;
 124                                 regulator-max-microvolt = <1380000>;
 125                                 regulator-always-on;
 126                         };
 127
 128                         vddsoc_reg: bcore2 {
 129                                 regulator-min-microvolt = <730000>;
 130                                 regulator-max-microvolt = <1380000>;
 131                                 regulator-always-on;
 132                         };
 133
 134                         vdd_ddr3_reg: bpro {
 135                                 regulator-min-microvolt = <1500000>;
 136                                 regulator-max-microvolt = <1500000>;
 137                                 regulator-always-on;
 138                         };
 139
 140                         vdd_3v3_reg: bperi {
 141                                 regulator-min-microvolt = <3300000>;
 142                                 regulator-max-microvolt = <3300000>;
 143                                 regulator-always-on;
 144                         };
 145
 146                         vdd_buckmem_reg: bmem {
 147                                 regulator-min-microvolt = <3300000>;
 148                                 regulator-max-microvolt = <3300000>;
 149                                 regulator-always-on;
 150                         };
 151
 152                         vdd_eth_reg: bio {
 153                                 regulator-min-microvolt = <1200000>;
 154                                 regulator-max-microvolt = <1200000>;
 155                                 regulator-always-on;
 156                         };
 157
 158                         vdd_eth_io_reg: ldo4 {
 159                                 regulator-min-microvolt = <2500000>;
 160                                 regulator-max-microvolt = <2500000>;
 161                                 regulator-always-on;
 162                         };
 163
 164                         vdd_mx6_snvs_reg: ldo5 {
 165                                 regulator-min-microvolt = <3000000>;
 166                                 regulator-max-microvolt = <3000000>;
 167                                 regulator-always-on;
 168                         };
 169
 170                         vdd_3v3_pmic_io_reg: ldo6 {
 171                                 regulator-min-microvolt = <3300000>;
 172                                 regulator-max-microvolt = <3300000>;
 173                                 regulator-always-on;
 174                         };
 175
 176                         vdd_sd0_reg: ldo9 {
 177                                 regulator-min-microvolt = <3300000>;
 178                                 regulator-max-microvolt = <3300000>;
 179                         };
 180
 181                         vdd_sd1_reg: ldo10 {
 182                                 regulator-min-microvolt = <3300000>;
 183                                 regulator-max-microvolt = <3300000>;
 184                         };
 185
 186                         vdd_mx6_high_reg: ldo11 {
 187                                 regulator-min-microvolt = <3000000>;
 188                                 regulator-max-microvolt = <3000000>;
 189                                 regulator-always-on;
 190                         };
 191                 };
 192         };
 193 };
 194
 195 &i2c2 {
 196         pinctrl-names = "default";
 197         pinctrl-0 = <&pinctrl_i2c2>;
 198         clock-frequency = <100000>;
 199 };
 200
 201 &i2c3 {
 202         pinctrl-names = "default";
 203         pinctrl-0 = <&pinctrl_i2c3>;
 204         clock-frequency = <100000>;
 205 };
 206
 207 &iomuxc {
 208         pinctrl-names = "default";
 209         pinctrl-0 = <&pinctrl_hog>;
 210
 211         imx6q-phytec-pfla02 {
 212                 pinctrl_hog: hoggrp {
 213                         fsl,pins = <
 214                                 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
 215                                 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
 216                                 MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
 217                                 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
 218                                 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
 219                         >;
 220                 };
 221
 222                 pinctrl_ecspi3: ecspi3grp {
 223                         fsl,pins = <
 224                                 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 225                                 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 226                                 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 227                         >;
 228                 };
 229
 230                 pinctrl_enet: enetgrp {
 231                         fsl,pins = <
 232                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 233                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 234                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 235                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 236                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 237                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 238                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 239                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 240                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 241                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 242                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 243                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 244                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 245                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 246                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 247                                 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 248                         >;
 249                 };
 250
 251                 pinctrl_flexcan1: flexcan1grp {
 252                         fsl,pins = <
 253                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
 254                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b0
 255                         >;
 256                 };
 257
 258                 pinctrl_gpmi_nand: gpminandgrp {
 259                         fsl,pins = <
 260                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 261                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 262                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 263                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 264                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 265                                 MX6QDL_PAD_NANDF_CS1__NAND_CE1_B        0xb0b1
 266                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 267                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 268                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 269                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 270                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 271                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 272                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 273                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 274                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 275                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 276                                 MX6QDL_PAD_SD4_DAT0__NAND_DQS           0x00b1
 277                         >;
 278                 };
 279
 280                 pinctrl_i2c1: i2c1grp {
 281                         fsl,pins = <
 282                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 283                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 284                         >;
 285                 };
 286
 287                 pinctrl_i2c2: i2c2grp {
 288                         fsl,pins = <
 289                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 290                                 MX6QDL_PAD_EIM_D16__I2C2_SDA            0x4001b8b1
 291                         >;
 292                 };
 293
 294                 pinctrl_i2c3: i2c3grp {
 295                         fsl,pins = <
 296                                 MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
 297                                 MX6QDL_PAD_EIM_D18__I2C3_SDA            0x4001b8b1
 298                         >;
 299                 };
 300
 301                 pinctrl_pcie: pciegrp {
 302                         fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
 303                 };
 304
 305                 pinctrl_uart3: uart3grp {
 306                         fsl,pins = <
 307                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 308                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 309                                 MX6QDL_PAD_EIM_D30__UART3_RTS_B         0x1b0b1
 310                                 MX6QDL_PAD_EIM_D31__UART3_CTS_B         0x1b0b1
 311                         >;
 312                 };
 313
 314                 pinctrl_uart4: uart4grp {
 315                         fsl,pins = <
 316                                 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 317                                 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 318                         >;
 319                 };
 320
 321                 pinctrl_usbh1: usbh1grp {
 322                         fsl,pins = <
 323                                 MX6QDL_PAD_GPIO_0__USB_H1_PWR           0x80000000
 324                         >;
 325                 };
 326
 327                 pinctrl_usbotg: usbotggrp {
 328                         fsl,pins = <
 329                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 330                                 MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x1b0b0
 331                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x80000000
 332                         >;
 333                 };
 334
 335                 pinctrl_usdhc2: usdhc2grp {
 336                         fsl,pins = <
 337                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 338                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 339                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 340                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 341                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 342                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 343                         >;
 344                 };
 345
 346                 pinctrl_usdhc3: usdhc3grp {
 347                         fsl,pins = <
 348                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 349                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 350                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 351                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 352                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 353                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 354                         >;
 355                 };
 356
 357                 pinctrl_usdhc3_cdwp: usdhc3cdwp {
 358                         fsl,pins = <
 359                                 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
 360                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 361                         >;
 362                 };
 363
 364                 pinctrl_audmux: audmuxgrp {
 365                         fsl,pins = <
 366                                 MX6QDL_PAD_DISP0_DAT16__AUD5_TXC        0x130b0
 367                                 MX6QDL_PAD_DISP0_DAT17__AUD5_TXD        0x110b0
 368                                 MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS       0x130b0
 369                                 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
 370                         >;
 371                 };
 372         };
 373 };
 374
 375 &pcie {
 376         pinctrl-names = "default";
 377         pinctrl-0 = <&pinctrl_pcie>;
 378         reset-gpio = <&gpio4 17 0>;
 379         status = "disabled";
 380 };
 381
 382 &uart3 {
 383         pinctrl-names = "default";
 384         pinctrl-0 = <&pinctrl_uart3>;
 385         status = "disabled";
 386 };
 387
 388 &uart4 {
 389         pinctrl-names = "default";
 390         pinctrl-0 = <&pinctrl_uart4>;
 391         status = "disabled";
 392 };
 393
 394 &usbh1 {
 395         vbus-supply = <&reg_usb_h1_vbus>;
 396         pinctrl-names = "default";
 397         pinctrl-0 = <&pinctrl_usbh1>;
 398         status = "disabled";
 399 };
 400
 401 &usbotg {
 402         vbus-supply = <&reg_usb_otg_vbus>;
 403         pinctrl-names = "default";
 404         pinctrl-0 = <&pinctrl_usbotg>;
 405         disable-over-current;
 406         status = "disabled";
 407 };
 408
 409 &usdhc2 {
 410         pinctrl-names = "default";
 411         pinctrl-0 = <&pinctrl_usdhc2>;
 412         cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 413         wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 414         status = "disabled";
 415 };
 416
 417 &usdhc3 {
 418         pinctrl-names = "default";
 419         pinctrl-0 = <&pinctrl_usdhc3
 420                      &pinctrl_usdhc3_cdwp>;
 421         cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 422         wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 423         status = "disabled";
 424 };