arch/arm/boot/dts/imx7d.dtsi

   1 /*
   2  * Copyright 2015 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include <dt-bindings/clock/imx7d-clock.h>
  44 #include <dt-bindings/gpio/gpio.h>
  45 #include <dt-bindings/interrupt-controller/arm-gic.h>
  46 #include "imx7d-pinfunc.h"
  47 #include "skeleton.dtsi"
  48
  49 / {
  50         aliases {
  51                 gpio0 = &gpio1;
  52                 gpio1 = &gpio2;
  53                 gpio2 = &gpio3;
  54                 gpio3 = &gpio4;
  55                 gpio4 = &gpio5;
  56                 gpio5 = &gpio6;
  57                 gpio6 = &gpio7;
  58                 i2c0 = &i2c1;
  59                 i2c1 = &i2c2;
  60                 i2c2 = &i2c3;
  61                 i2c3 = &i2c4;
  62                 mmc0 = &usdhc1;
  63                 mmc1 = &usdhc2;
  64                 mmc2 = &usdhc3;
  65                 serial0 = &uart1;
  66                 serial1 = &uart2;
  67                 serial2 = &uart3;
  68                 serial3 = &uart4;
  69                 serial4 = &uart5;
  70                 serial5 = &uart6;
  71                 serial6 = &uart7;
  72         };
  73
  74         cpus {
  75                 #address-cells = <1>;
  76                 #size-cells = <0>;
  77
  78                 cpu0: cpu@0 {
  79                         compatible = "arm,cortex-a7";
  80                         device_type = "cpu";
  81                         reg = <0>;
  82                         operating-points = <
  83                                 /* KHz  uV */
  84                                 996000  1075000
  85                                 792000  975000
  86                         >;
  87                         clock-latency = <61036>; /* two CLK32 periods */
  88                         clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
  89                                  <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
  90                         clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
  91                 };
  92
  93                 cpu1: cpu@1 {
  94                         compatible = "arm,cortex-a7";
  95                         device_type = "cpu";
  96                         reg = <1>;
  97                 };
  98         };
  99
 100         intc: interrupt-controller@31001000 {
 101                 compatible = "arm,cortex-a7-gic";
 102                 #interrupt-cells = <3>;
 103                 interrupt-controller;
 104                 reg = <0x31001000 0x1000>,
 105                       <0x31002000 0x1000>,
 106                       <0x31004000 0x2000>,
 107                       <0x31006000 0x2000>;
 108         };
 109
 110         ckil: clock-cki {
 111                 compatible = "fixed-clock";
 112                 #clock-cells = <0>;
 113                 clock-frequency = <32768>;
 114                 clock-output-names = "ckil";
 115         };
 116
 117         osc: clock-osc {
 118                 compatible = "fixed-clock";
 119                 #clock-cells = <0>;
 120                 clock-frequency = <24000000>;
 121                 clock-output-names = "osc";
 122         };
 123
 124         etr@30086000 {
 125                 compatible = "arm,coresight-tmc", "arm,primecell";
 126                 reg = <0x30086000 0x1000>;
 127                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 128                 clock-names = "apb_pclk";
 129
 130                 port {
 131                         etr_in_port: endpoint {
 132                                 slave-mode;
 133                                 remote-endpoint = <&replicator_out_port1>;
 134                         };
 135                 };
 136         };
 137
 138         tpiu@30087000 {
 139                 compatible = "arm,coresight-tpiu", "arm,primecell";
 140                 reg = <0x30087000 0x1000>;
 141                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 142                 clock-names = "apb_pclk";
 143
 144                 port {
 145                         tpiu_in_port: endpoint {
 146                                 slave-mode;
 147                                 remote-endpoint = <&replicator_out_port1>;
 148                         };
 149                 };
 150         };
 151
 152         replicator {
 153                 /*
 154                  * non-configurable replicators don't show up on the
 155                  * AMBA bus.  As such no need to add "arm,primecell"
 156                  */
 157                 compatible = "arm,coresight-replicator";
 158
 159                 ports {
 160                         #address-cells = <1>;
 161                         #size-cells = <0>;
 162
 163                         /* replicator output ports */
 164                         port@0 {
 165                                 reg = <0>;
 166                                 replicator_out_port0: endpoint {
 167                                         remote-endpoint = <&tpiu_in_port>;
 168                                 };
 169                         };
 170
 171                         port@1 {
 172                                 reg = <1>;
 173                                 replicator_out_port1: endpoint {
 174                                         remote-endpoint = <&etr_in_port>;
 175                                 };
 176                         };
 177
 178                         /* replicator input port */
 179                         port@2 {
 180                                 reg = <0>;
 181                                 replicator_in_port0: endpoint {
 182                                         slave-mode;
 183                                         remote-endpoint = <&etf_out_port>;
 184                                 };
 185                         };
 186                 };
 187         };
 188
 189         etf@30084000 {
 190                 compatible = "arm,coresight-tmc", "arm,primecell";
 191                 reg = <0x30084000 0x1000>;
 192                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 193                 clock-names = "apb_pclk";
 194
 195                 ports {
 196                         #address-cells = <1>;
 197                         #size-cells = <0>;
 198
 199                         port@0 {
 200                                 reg = <0>;
 201                                 etf_in_port: endpoint {
 202                                         slave-mode;
 203                                         remote-endpoint = <&hugo_funnel_out_port0>;
 204                                 };
 205                         };
 206
 207                         port@1 {
 208                                 reg = <0>;
 209                                 etf_out_port: endpoint {
 210                                         remote-endpoint = <&replicator_in_port0>;
 211                                 };
 212                         };
 213                 };
 214         };
 215
 216         funnel@30083000 {
 217                 compatible = "arm,coresight-funnel", "arm,primecell";
 218                 reg = <0x30083000 0x1000>;
 219                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 220                 clock-names = "apb_pclk";
 221
 222                 ports {
 223                         #address-cells = <1>;
 224                         #size-cells = <0>;
 225
 226                         /* funnel input ports */
 227                         port@0 {
 228                                 reg = <0>;
 229                                 hugo_funnel_in_port0: endpoint {
 230                                         slave-mode;
 231                                         remote-endpoint = <&ca_funnel_out_port0>;
 232                                 };
 233                         };
 234
 235                         port@1 {
 236                                 reg = <1>;
 237                                 hugo_funnel_in_port1: endpoint {
 238                                         slave-mode; /* M4 input */
 239                                 };
 240                         };
 241
 242                         port@2 {
 243                                 reg = <0>;
 244                                 hugo_funnel_out_port0: endpoint {
 245                                         remote-endpoint = <&etf_in_port>;
 246                                 };
 247                         };
 248
 249                         /* the other input ports are not connect to anything */
 250                 };
 251         };
 252
 253         funnel@30041000 {
 254                 compatible = "arm,coresight-funnel", "arm,primecell";
 255                 reg = <0x30041000 0x1000>;
 256                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 257                 clock-names = "apb_pclk";
 258
 259                 ports {
 260                         #address-cells = <1>;
 261                         #size-cells = <0>;
 262
 263                         /* funnel input ports */
 264                         port@0 {
 265                                 reg = <0>;
 266                                 ca_funnel_in_port0: endpoint {
 267                                         slave-mode;
 268                                         remote-endpoint = <&etm0_out_port>;
 269                                 };
 270                         };
 271
 272                         port@1 {
 273                                 reg = <1>;
 274                                 ca_funnel_in_port1: endpoint {
 275                                         slave-mode;
 276                                         remote-endpoint = <&etm1_out_port>;
 277                                 };
 278                         };
 279
 280                         /* funnel output port */
 281                         port@2 {
 282                                 reg = <0>;
 283                                 ca_funnel_out_port0: endpoint {
 284                                         remote-endpoint = <&hugo_funnel_in_port0>;
 285                                 };
 286                         };
 287
 288                         /* the other input ports are not connect to anything */
 289                 };
 290         };
 291
 292         etm@3007c000 {
 293                 compatible = "arm,coresight-etm3x", "arm,primecell";
 294                 reg = <0x3007c000 0x1000>;
 295                 cpu = <&cpu0>;
 296                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 297                 clock-names = "apb_pclk";
 298
 299                 port {
 300                         etm0_out_port: endpoint {
 301                                 remote-endpoint = <&ca_funnel_in_port0>;
 302                         };
 303                 };
 304         };
 305
 306         etm@3007d000 {
 307                 compatible = "arm,coresight-etm3x", "arm,primecell";
 308                 reg = <0x3007d000 0x1000>;
 309
 310                 /*
 311                  * System will hang if added nosmp in kernel command line
 312                  * without arm,primecell-periphid because amba bus try to
 313                  * read id and core1 power off at this time.
 314                  */
 315                 arm,primecell-periphid = <0xbb956>;
 316                 cpu = <&cpu1>;
 317                 clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 318                 clock-names = "apb_pclk";
 319
 320                 port {
 321                         etm1_out_port: endpoint {
 322                                 remote-endpoint = <&ca_funnel_in_port1>;
 323                         };
 324                 };
 325         };
 326
 327         soc {
 328                 #address-cells = <1>;
 329                 #size-cells = <1>;
 330                 compatible = "simple-bus";
 331                 interrupt-parent = <&intc>;
 332                 ranges;
 333
 334                 aips1: aips-bus@30000000 {
 335                         compatible = "fsl,aips-bus", "simple-bus";
 336                         #address-cells = <1>;
 337                         #size-cells = <1>;
 338                         reg = <0x30000000 0x400000>;
 339                         ranges;
 340
 341                         gpio1: gpio@30200000 {
 342                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 343                                 reg = <0x30200000 0x10000>;
 344                                 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
 345                                              <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
 346                                 gpio-controller;
 347                                 #gpio-cells = <2>;
 348                                 interrupt-controller;
 349                                 #interrupt-cells = <2>;
 350                         };
 351
 352                         gpio2: gpio@30210000 {
 353                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 354                                 reg = <0x30210000 0x10000>;
 355                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 356                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 357                                 gpio-controller;
 358                                 #gpio-cells = <2>;
 359                                 interrupt-controller;
 360                                 #interrupt-cells = <2>;
 361                         };
 362
 363                         gpio3: gpio@30220000 {
 364                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 365                                 reg = <0x30220000 0x10000>;
 366                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 367                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 368                                 gpio-controller;
 369                                 #gpio-cells = <2>;
 370                                 interrupt-controller;
 371                                 #interrupt-cells = <2>;
 372                         };
 373
 374                         gpio4: gpio@30230000 {
 375                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 376                                 reg = <0x30230000 0x10000>;
 377                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 378                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 379                                 gpio-controller;
 380                                 #gpio-cells = <2>;
 381                                 interrupt-controller;
 382                                 #interrupt-cells = <2>;
 383                         };
 384
 385                         gpio5: gpio@30240000 {
 386                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 387                                 reg = <0x30240000 0x10000>;
 388                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 389                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 390                                 gpio-controller;
 391                                 #gpio-cells = <2>;
 392                                 interrupt-controller;
 393                                 #interrupt-cells = <2>;
 394                         };
 395
 396                         gpio6: gpio@30250000 {
 397                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 398                                 reg = <0x30250000 0x10000>;
 399                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 400                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 401                                 gpio-controller;
 402                                 #gpio-cells = <2>;
 403                                 interrupt-controller;
 404                                 #interrupt-cells = <2>;
 405                         };
 406
 407                         gpio7: gpio@30260000 {
 408                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 409                                 reg = <0x30260000 0x10000>;
 410                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 411                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 412                                 gpio-controller;
 413                                 #gpio-cells = <2>;
 414                                 interrupt-controller;
 415                                 #interrupt-cells = <2>;
 416                         };
 417
 418                         wdog1: wdog@30280000 {
 419                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 420                                 reg = <0x30280000 0x10000>;
 421                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 422                                 clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
 423                         };
 424
 425                         wdog2: wdog@30290000 {
 426                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 427                                 reg = <0x30290000 0x10000>;
 428                                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 429                                 clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
 430                                 status = "disabled";
 431                         };
 432
 433                         wdog3: wdog@302a0000 {
 434                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 435                                 reg = <0x302a0000 0x10000>;
 436                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 437                                 clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
 438                                 status = "disabled";
 439                         };
 440
 441                         wdog4: wdog@302b0000 {
 442                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 443                                 reg = <0x302b0000 0x10000>;
 444                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 445                                 clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
 446                                 status = "disabled";
 447                         };
 448
 449                         iomuxc_lpsr: iomuxc-lpsr@302c0000 {
 450                                 compatible = "fsl,imx7d-iomuxc-lpsr";
 451                                 reg = <0x302c0000 0x10000>;
 452                                 fsl,input-sel = <&iomuxc>;
 453                         };
 454
 455                         gpt1: gpt@302d0000 {
 456                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 457                                 reg = <0x302d0000 0x10000>;
 458                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 459                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 460                                          <&clks IMX7D_GPT1_ROOT_CLK>;
 461                                 clock-names = "ipg", "per";
 462                         };
 463
 464                         gpt2: gpt@302e0000 {
 465                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 466                                 reg = <0x302e0000 0x10000>;
 467                                 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 468                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 469                                          <&clks IMX7D_GPT2_ROOT_CLK>;
 470                                 clock-names = "ipg", "per";
 471                                 status = "disabled";
 472                         };
 473
 474                         gpt3: gpt@302f0000 {
 475                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 476                                 reg = <0x302f0000 0x10000>;
 477                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 478                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 479                                          <&clks IMX7D_GPT3_ROOT_CLK>;
 480                                 clock-names = "ipg", "per";
 481                                 status = "disabled";
 482                         };
 483
 484                         gpt4: gpt@30300000 {
 485                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 486                                 reg = <0x30300000 0x10000>;
 487                                 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 488                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 489                                          <&clks IMX7D_GPT4_ROOT_CLK>;
 490                                 clock-names = "ipg", "per";
 491                                 status = "disabled";
 492                         };
 493
 494                         iomuxc: iomuxc@30330000 {
 495                                 compatible = "fsl,imx7d-iomuxc";
 496                                 reg = <0x30330000 0x10000>;
 497                         };
 498
 499                         gpr: iomuxc-gpr@30340000 {
 500                                 compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
 501                                 reg = <0x30340000 0x10000>;
 502                         };
 503
 504                         ocotp: ocotp-ctrl@30350000 {
 505                                 compatible = "syscon";
 506                                 reg = <0x30350000 0x10000>;
 507                                 clocks = <&clks IMX7D_CLK_DUMMY>;
 508                                 status = "disabled";
 509                         };
 510
 511                         anatop: anatop@30360000 {
 512                                 compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
 513                                         "syscon", "simple-bus";
 514                                 reg = <0x30360000 0x10000>;
 515                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 516                                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 517
 518                                 reg_1p0d: regulator-vdd1p0d@210 {
 519                                         compatible = "fsl,anatop-regulator";
 520                                         regulator-name = "vdd1p0d";
 521                                         regulator-min-microvolt = <800000>;
 522                                         regulator-max-microvolt = <1200000>;
 523                                         anatop-reg-offset = <0x210>;
 524                                         anatop-vol-bit-shift = <8>;
 525                                         anatop-vol-bit-width = <5>;
 526                                         anatop-min-bit-val = <8>;
 527                                         anatop-min-voltage = <800000>;
 528                                         anatop-max-voltage = <1200000>;
 529                                         anatop-enable-bit = <31>;
 530                                 };
 531                         };
 532
 533                         snvs: snvs@30370000 {
 534                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 535                                 reg = <0x30370000 0x10000>;
 536
 537                                 snvs_rtc: snvs-rtc-lp {
 538                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 539                                         regmap = <&snvs>;
 540                                         offset = <0x34>;
 541                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 542                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 543                                 };
 544
 545                                 snvs_poweroff: snvs-poweroff {
 546                                         compatible = "syscon-poweroff";
 547                                         regmap = <&snvs>;
 548                                         offset = <0x38>;
 549                                         mask = <0x60>;
 550                                 };
 551
 552                                 snvs_pwrkey: snvs-powerkey {
 553                                         compatible = "fsl,sec-v4.0-pwrkey";
 554                                         regmap = <&snvs>;
 555                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 556                                         linux,keycode = <KEY_POWER>;
 557                                         wakeup-source;
 558                                 };
 559                         };
 560
 561                         clks: ccm@30380000 {
 562                                 compatible = "fsl,imx7d-ccm";
 563                                 reg = <0x30380000 0x10000>;
 564                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 565                                              <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 566                                 #clock-cells = <1>;
 567                                 clocks = <&ckil>, <&osc>;
 568                                 clock-names = "ckil", "osc";
 569                         };
 570
 571                         src: src@30390000 {
 572                                 compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
 573                                 reg = <0x30390000 0x10000>;
 574                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 575                                 #reset-cells = <1>;
 576                         };
 577                 };
 578
 579                 aips2: aips-bus@30400000 {
 580                         compatible = "fsl,aips-bus", "simple-bus";
 581                         #address-cells = <1>;
 582                         #size-cells = <1>;
 583                         reg = <0x30400000 0x400000>;
 584                         ranges;
 585
 586                         pwm1: pwm@30660000 {
 587                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 588                                 reg = <0x30660000 0x10000>;
 589                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 590                                 clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
 591                                          <&clks IMX7D_PWM1_ROOT_CLK>;
 592                                 clock-names = "ipg", "per";
 593                                 #pwm-cells = <2>;
 594                                 status = "disabled";
 595                         };
 596
 597                         pwm2: pwm@30670000 {
 598                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 599                                 reg = <0x30670000 0x10000>;
 600                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 601                                 clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
 602                                          <&clks IMX7D_PWM2_ROOT_CLK>;
 603                                 clock-names = "ipg", "per";
 604                                 #pwm-cells = <2>;
 605                                 status = "disabled";
 606                         };
 607
 608                         pwm3: pwm@30680000 {
 609                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 610                                 reg = <0x30680000 0x10000>;
 611                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 612                                 clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
 613                                          <&clks IMX7D_PWM3_ROOT_CLK>;
 614                                 clock-names = "ipg", "per";
 615                                 #pwm-cells = <2>;
 616                                 status = "disabled";
 617                         };
 618
 619                         pwm4: pwm@30690000 {
 620                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 621                                 reg = <0x30690000 0x10000>;
 622                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 623                                 clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
 624                                          <&clks IMX7D_PWM4_ROOT_CLK>;
 625                                 clock-names = "ipg", "per";
 626                                 #pwm-cells = <2>;
 627                                 status = "disabled";
 628                         };
 629                 };
 630
 631                 aips3: aips-bus@30800000 {
 632                         compatible = "fsl,aips-bus", "simple-bus";
 633                         #address-cells = <1>;
 634                         #size-cells = <1>;
 635                         reg = <0x30800000 0x400000>;
 636                         ranges;
 637
 638                         uart1: serial@30860000 {
 639                                 compatible = "fsl,imx7d-uart",
 640                                              "fsl,imx6q-uart";
 641                                 reg = <0x30860000 0x10000>;
 642                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 643                                 clocks = <&clks IMX7D_UART1_ROOT_CLK>,
 644                                         <&clks IMX7D_UART1_ROOT_CLK>;
 645                                 clock-names = "ipg", "per";
 646                                 status = "disabled";
 647                         };
 648
 649                         uart2: serial@30890000 {
 650                                 compatible = "fsl,imx7d-uart",
 651                                              "fsl,imx6q-uart";
 652                                 reg = <0x30890000 0x10000>;
 653                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 654                                 clocks = <&clks IMX7D_UART2_ROOT_CLK>,
 655                                         <&clks IMX7D_UART2_ROOT_CLK>;
 656                                 clock-names = "ipg", "per";
 657                                 status = "disabled";
 658                         };
 659
 660                         uart3: serial@30880000 {
 661                                 compatible = "fsl,imx7d-uart",
 662                                              "fsl,imx6q-uart";
 663                                 reg = <0x30880000 0x10000>;
 664                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 665                                 clocks = <&clks IMX7D_UART3_ROOT_CLK>,
 666                                         <&clks IMX7D_UART3_ROOT_CLK>;
 667                                 clock-names = "ipg", "per";
 668                                 status = "disabled";
 669                         };
 670
 671                         i2c1: i2c@30a20000 {
 672                                 #address-cells = <1>;
 673                                 #size-cells = <0>;
 674                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 675                                 reg = <0x30a20000 0x10000>;
 676                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 677                                 clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
 678                                 status = "disabled";
 679                         };
 680
 681                         i2c2: i2c@30a30000 {
 682                                 #address-cells = <1>;
 683                                 #size-cells = <0>;
 684                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 685                                 reg = <0x30a30000 0x10000>;
 686                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 687                                 clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
 688                                 status = "disabled";
 689                         };
 690
 691                         i2c3: i2c@30a40000 {
 692                                 #address-cells = <1>;
 693                                 #size-cells = <0>;
 694                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 695                                 reg = <0x30a40000 0x10000>;
 696                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 697                                 clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
 698                                 status = "disabled";
 699                         };
 700
 701                         i2c4: i2c@30a50000 {
 702                                 #address-cells = <1>;
 703                                 #size-cells = <0>;
 704                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 705                                 reg = <0x30a50000 0x10000>;
 706                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 707                                 clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
 708                                 status = "disabled";
 709                         };
 710
 711                         uart4: serial@30a60000 {
 712                                 compatible = "fsl,imx7d-uart",
 713                                              "fsl,imx6q-uart";
 714                                 reg = <0x30a60000 0x10000>;
 715                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 716                                 clocks = <&clks IMX7D_UART4_ROOT_CLK>,
 717                                         <&clks IMX7D_UART4_ROOT_CLK>;
 718                                 clock-names = "ipg", "per";
 719                                 status = "disabled";
 720                         };
 721
 722                         uart5: serial@30a70000 {
 723                                 compatible = "fsl,imx7d-uart",
 724                                              "fsl,imx6q-uart";
 725                                 reg = <0x30a70000 0x10000>;
 726                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 727                                 clocks = <&clks IMX7D_UART5_ROOT_CLK>,
 728                                         <&clks IMX7D_UART5_ROOT_CLK>;
 729                                 clock-names = "ipg", "per";
 730                                 status = "disabled";
 731                         };
 732
 733                         uart6: serial@30a80000 {
 734                                 compatible = "fsl,imx7d-uart",
 735                                              "fsl,imx6q-uart";
 736                                 reg = <0x30a80000 0x10000>;
 737                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 738                                 clocks = <&clks IMX7D_UART6_ROOT_CLK>,
 739                                         <&clks IMX7D_UART6_ROOT_CLK>;
 740                                 clock-names = "ipg", "per";
 741                                 status = "disabled";
 742                         };
 743
 744                         uart7: serial@30a90000 {
 745                                 compatible = "fsl,imx7d-uart",
 746                                              "fsl,imx6q-uart";
 747                                 reg = <0x30a90000 0x10000>;
 748                                 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 749                                 clocks = <&clks IMX7D_UART7_ROOT_CLK>,
 750                                         <&clks IMX7D_UART7_ROOT_CLK>;
 751                                 clock-names = "ipg", "per";
 752                                 status = "disabled";
 753                         };
 754
 755                         usbotg1: usb@30b10000 {
 756                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 757                                 reg = <0x30b10000 0x200>;
 758                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 759                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
 760                                 fsl,usbphy = <&usbphynop1>;
 761                                 fsl,usbmisc = <&usbmisc1 0>;
 762                                 phy-clkgate-delay-us = <400>;
 763                                 status = "disabled";
 764                         };
 765
 766                         usbotg2: usb@30b20000 {
 767                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 768                                 reg = <0x30b20000 0x200>;
 769                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 770                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
 771                                 fsl,usbphy = <&usbphynop2>;
 772                                 fsl,usbmisc = <&usbmisc2 0>;
 773                                 phy-clkgate-delay-us = <400>;
 774                                 status = "disabled";
 775                         };
 776
 777                         usbh: usb@30b30000 {
 778                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 779                                 reg = <0x30b30000 0x200>;
 780                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 781                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
 782                                 fsl,usbphy = <&usbphynop3>;
 783                                 fsl,usbmisc = <&usbmisc3 0>;
 784                                 phy_type = "hsic";
 785                                 dr_mode = "host";
 786                                 phy-clkgate-delay-us = <400>;
 787                                 status = "disabled";
 788                         };
 789
 790                         usbmisc1: usbmisc@30b10200 {
 791                                 #index-cells = <1>;
 792                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 793                                 reg = <0x30b10200 0x200>;
 794                         };
 795
 796                         usbmisc2: usbmisc@30b20200 {
 797                                 #index-cells = <1>;
 798                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 799                                 reg = <0x30b20200 0x200>;
 800                         };
 801
 802                         usbmisc3: usbmisc@30b30200 {
 803                                 #index-cells = <1>;
 804                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 805                                 reg = <0x30b30200 0x200>;
 806                         };
 807
 808                         usbphynop1: usbphynop1 {
 809                                 compatible = "usb-nop-xceiv";
 810                                 clocks = <&clks IMX7D_USB_PHY1_CLK>;
 811                                 clock-names = "main_clk";
 812                         };
 813
 814                         usbphynop2: usbphynop2 {
 815                                 compatible = "usb-nop-xceiv";
 816                                 clocks = <&clks IMX7D_USB_PHY2_CLK>;
 817                                 clock-names = "main_clk";
 818                         };
 819
 820                         usbphynop3: usbphynop3 {
 821                                 compatible = "usb-nop-xceiv";
 822                                 clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 823                                 clock-names = "main_clk";
 824                         };
 825
 826                         usdhc1: usdhc@30b40000 {
 827                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 828                                 reg = <0x30b40000 0x10000>;
 829                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 830                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 831                                         <&clks IMX7D_CLK_DUMMY>,
 832                                         <&clks IMX7D_USDHC1_ROOT_CLK>;
 833                                 clock-names = "ipg", "ahb", "per";
 834                                 bus-width = <4>;
 835                                 status = "disabled";
 836                         };
 837
 838                         usdhc2: usdhc@30b50000 {
 839                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 840                                 reg = <0x30b50000 0x10000>;
 841                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 842                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 843                                         <&clks IMX7D_CLK_DUMMY>,
 844                                         <&clks IMX7D_USDHC2_ROOT_CLK>;
 845                                 clock-names = "ipg", "ahb", "per";
 846                                 bus-width = <4>;
 847                                 status = "disabled";
 848                         };
 849
 850                         usdhc3: usdhc@30b60000 {
 851                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 852                                 reg = <0x30b60000 0x10000>;
 853                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 854                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 855                                         <&clks IMX7D_CLK_DUMMY>,
 856                                         <&clks IMX7D_USDHC3_ROOT_CLK>;
 857                                 clock-names = "ipg", "ahb", "per";
 858                                 bus-width = <4>;
 859                                 status = "disabled";
 860                         };
 861
 862                         fec1: ethernet@30be0000 {
 863                                 compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 864                                 reg = <0x30be0000 0x10000>;
 865                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 866                                         <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
 867                                         <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 868                                 clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 869                                         <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 870                                         <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
 871                                         <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
 872                                         <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
 873                                 clock-names = "ipg", "ahb", "ptp",
 874                                         "enet_clk_ref", "enet_out";
 875                                 fsl,num-tx-queues=<3>;
 876                                 fsl,num-rx-queues=<3>;
 877                                 status = "disabled";
 878                         };
 879
 880                         fec2: ethernet@30bf0000 {
 881                                 compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 882                                 reg = <0x30bf0000 0x10000>;
 883                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 884                                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 885                                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 886                                 clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 887                                         <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 888                                         <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
 889                                         <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
 890                                         <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
 891                                 clock-names = "ipg", "ahb", "ptp",
 892                                         "enet_clk_ref", "enet_out";
 893                                 fsl,num-tx-queues=<3>;
 894                                 fsl,num-rx-queues=<3>;
 895                                 status = "disabled";
 896                         };
 897                 };
 898         };
 899 };