]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/arm/boot/dts/omap4.dtsi
Merge remote-tracking branch 'at91/at91-next'
[karo-tx-linux.git] / arch / arm / boot / dts / omap4.dtsi
1 /*
2  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/omap.h>
12
13 #include "skeleton.dtsi"
14
15 / {
16         compatible = "ti,omap4430", "ti,omap4";
17         interrupt-parent = <&wakeupgen>;
18
19         aliases {
20                 i2c0 = &i2c1;
21                 i2c1 = &i2c2;
22                 i2c2 = &i2c3;
23                 i2c3 = &i2c4;
24                 serial0 = &uart1;
25                 serial1 = &uart2;
26                 serial2 = &uart3;
27                 serial3 = &uart4;
28         };
29
30         cpus {
31                 #address-cells = <1>;
32                 #size-cells = <0>;
33
34                 cpu@0 {
35                         compatible = "arm,cortex-a9";
36                         device_type = "cpu";
37                         next-level-cache = <&L2>;
38                         reg = <0x0>;
39
40                         clocks = <&dpll_mpu_ck>;
41                         clock-names = "cpu";
42
43                         clock-latency = <300000>; /* From omap-cpufreq driver */
44                 };
45                 cpu@1 {
46                         compatible = "arm,cortex-a9";
47                         device_type = "cpu";
48                         next-level-cache = <&L2>;
49                         reg = <0x1>;
50                 };
51         };
52
53         gic: interrupt-controller@48241000 {
54                 compatible = "arm,cortex-a9-gic";
55                 interrupt-controller;
56                 #interrupt-cells = <3>;
57                 reg = <0x48241000 0x1000>,
58                       <0x48240100 0x0100>;
59                 interrupt-parent = <&gic>;
60         };
61
62         L2: l2-cache-controller@48242000 {
63                 compatible = "arm,pl310-cache";
64                 reg = <0x48242000 0x1000>;
65                 cache-unified;
66                 cache-level = <2>;
67         };
68
69         local-timer@48240600 {
70                 compatible = "arm,cortex-a9-twd-timer";
71                 clocks = <&mpu_periphclk>;
72                 reg = <0x48240600 0x20>;
73                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
74                 interrupt-parent = <&gic>;
75         };
76
77         wakeupgen: interrupt-controller@48281000 {
78                 compatible = "ti,omap4-wugen-mpu";
79                 interrupt-controller;
80                 #interrupt-cells = <3>;
81                 reg = <0x48281000 0x1000>;
82                 interrupt-parent = <&gic>;
83         };
84
85         /*
86          * The soc node represents the soc top level view. It is used for IPs
87          * that are not memory mapped in the MPU view or for the MPU itself.
88          */
89         soc {
90                 compatible = "ti,omap-infra";
91                 mpu {
92                         compatible = "ti,omap4-mpu";
93                         ti,hwmods = "mpu";
94                         sram = <&ocmcram>;
95                 };
96
97                 dsp {
98                         compatible = "ti,omap3-c64";
99                         ti,hwmods = "dsp";
100                 };
101
102                 iva {
103                         compatible = "ti,ivahd";
104                         ti,hwmods = "iva";
105                 };
106         };
107
108         /*
109          * XXX: Use a flat representation of the OMAP4 interconnect.
110          * The real OMAP interconnect network is quite complex.
111          * Since it will not bring real advantage to represent that in DT for
112          * the moment, just use a fake OCP bus entry to represent the whole bus
113          * hierarchy.
114          */
115         ocp {
116                 compatible = "ti,omap4-l3-noc", "simple-bus";
117                 #address-cells = <1>;
118                 #size-cells = <1>;
119                 ranges;
120                 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
121                 reg = <0x44000000 0x1000>,
122                       <0x44800000 0x2000>,
123                       <0x45000000 0x1000>;
124                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
125                              <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
126
127                 l4_cfg: l4@4a000000 {
128                         compatible = "ti,omap4-l4-cfg", "simple-bus";
129                         #address-cells = <1>;
130                         #size-cells = <1>;
131                         ranges = <0 0x4a000000 0x1000000>;
132
133                         cm1: cm1@4000 {
134                                 compatible = "ti,omap4-cm1";
135                                 reg = <0x4000 0x2000>;
136
137                                 cm1_clocks: clocks {
138                                         #address-cells = <1>;
139                                         #size-cells = <0>;
140                                 };
141
142                                 cm1_clockdomains: clockdomains {
143                                 };
144                         };
145
146                         cm2: cm2@8000 {
147                                 compatible = "ti,omap4-cm2";
148                                 reg = <0x8000 0x3000>;
149
150                                 cm2_clocks: clocks {
151                                         #address-cells = <1>;
152                                         #size-cells = <0>;
153                                 };
154
155                                 cm2_clockdomains: clockdomains {
156                                 };
157                         };
158
159                         omap4_scm_core: scm@2000 {
160                                 compatible = "ti,omap4-scm-core", "simple-bus";
161                                 reg = <0x2000 0x1000>;
162                                 #address-cells = <1>;
163                                 #size-cells = <1>;
164                                 ranges = <0 0x2000 0x1000>;
165
166                                 scm_conf: scm_conf@0 {
167                                         compatible = "syscon";
168                                         reg = <0x0 0x800>;
169                                         #address-cells = <1>;
170                                         #size-cells = <1>;
171                                 };
172                         };
173
174                         omap4_padconf_core: scm@100000 {
175                                 compatible = "ti,omap4-scm-padconf-core",
176                                              "simple-bus";
177                                 #address-cells = <1>;
178                                 #size-cells = <1>;
179                                 ranges = <0 0x100000 0x1000>;
180
181                                 omap4_pmx_core: pinmux@40 {
182                                         compatible = "ti,omap4-padconf",
183                                                      "pinctrl-single";
184                                         reg = <0x40 0x0196>;
185                                         #address-cells = <1>;
186                                         #size-cells = <0>;
187                                         #interrupt-cells = <1>;
188                                         interrupt-controller;
189                                         pinctrl-single,register-width = <16>;
190                                         pinctrl-single,function-mask = <0x7fff>;
191                                 };
192
193                                 omap4_padconf_global: omap4_padconf_global@5a0 {
194                                         compatible = "syscon",
195                                                      "simple-bus";
196                                         reg = <0x5a0 0x170>;
197                                         #address-cells = <1>;
198                                         #size-cells = <1>;
199                                         ranges = <0 0x5a0 0x170>;
200
201                                         pbias_regulator: pbias_regulator {
202                                                 compatible = "ti,pbias-omap4", "ti,pbias-omap";
203                                                 reg = <0x60 0x4>;
204                                                 syscon = <&omap4_padconf_global>;
205                                                 pbias_mmc_reg: pbias_mmc_omap4 {
206                                                         regulator-name = "pbias_mmc_omap4";
207                                                         regulator-min-microvolt = <1800000>;
208                                                         regulator-max-microvolt = <3000000>;
209                                                 };
210                                         };
211                                 };
212                         };
213
214                         l4_wkup: l4@300000 {
215                                 compatible = "ti,omap4-l4-wkup", "simple-bus";
216                                 #address-cells = <1>;
217                                 #size-cells = <1>;
218                                 ranges = <0 0x300000 0x40000>;
219
220                                 counter32k: counter@4000 {
221                                         compatible = "ti,omap-counter32k";
222                                         reg = <0x4000 0x20>;
223                                         ti,hwmods = "counter_32k";
224                                 };
225
226                                 prm: prm@6000 {
227                                         compatible = "ti,omap4-prm";
228                                         reg = <0x6000 0x3000>;
229                                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
230
231                                         prm_clocks: clocks {
232                                                 #address-cells = <1>;
233                                                 #size-cells = <0>;
234                                         };
235
236                                         prm_clockdomains: clockdomains {
237                                         };
238                                 };
239
240                                 scrm: scrm@a000 {
241                                         compatible = "ti,omap4-scrm";
242                                         reg = <0xa000 0x2000>;
243
244                                         scrm_clocks: clocks {
245                                                 #address-cells = <1>;
246                                                 #size-cells = <0>;
247                                         };
248
249                                         scrm_clockdomains: clockdomains {
250                                         };
251                                 };
252
253                                 omap4_pmx_wkup: pinmux@1e040 {
254                                         compatible = "ti,omap4-padconf",
255                                                      "pinctrl-single";
256                                         reg = <0x1e040 0x0038>;
257                                         #address-cells = <1>;
258                                         #size-cells = <0>;
259                                         #interrupt-cells = <1>;
260                                         interrupt-controller;
261                                         pinctrl-single,register-width = <16>;
262                                         pinctrl-single,function-mask = <0x7fff>;
263                                 };
264                         };
265                 };
266
267                 ocmcram: ocmcram@40304000 {
268                         compatible = "mmio-sram";
269                         reg = <0x40304000 0xa000>; /* 40k */
270                 };
271
272                 sdma: dma-controller@4a056000 {
273                         compatible = "ti,omap4430-sdma";
274                         reg = <0x4a056000 0x1000>;
275                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
276                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
277                                      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
278                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
279                         #dma-cells = <1>;
280                         dma-channels = <32>;
281                         dma-requests = <127>;
282                 };
283
284                 gpio1: gpio@4a310000 {
285                         compatible = "ti,omap4-gpio";
286                         reg = <0x4a310000 0x200>;
287                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
288                         ti,hwmods = "gpio1";
289                         ti,gpio-always-on;
290                         gpio-controller;
291                         #gpio-cells = <2>;
292                         interrupt-controller;
293                         #interrupt-cells = <2>;
294                 };
295
296                 gpio2: gpio@48055000 {
297                         compatible = "ti,omap4-gpio";
298                         reg = <0x48055000 0x200>;
299                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
300                         ti,hwmods = "gpio2";
301                         gpio-controller;
302                         #gpio-cells = <2>;
303                         interrupt-controller;
304                         #interrupt-cells = <2>;
305                 };
306
307                 gpio3: gpio@48057000 {
308                         compatible = "ti,omap4-gpio";
309                         reg = <0x48057000 0x200>;
310                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
311                         ti,hwmods = "gpio3";
312                         gpio-controller;
313                         #gpio-cells = <2>;
314                         interrupt-controller;
315                         #interrupt-cells = <2>;
316                 };
317
318                 gpio4: gpio@48059000 {
319                         compatible = "ti,omap4-gpio";
320                         reg = <0x48059000 0x200>;
321                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
322                         ti,hwmods = "gpio4";
323                         gpio-controller;
324                         #gpio-cells = <2>;
325                         interrupt-controller;
326                         #interrupt-cells = <2>;
327                 };
328
329                 gpio5: gpio@4805b000 {
330                         compatible = "ti,omap4-gpio";
331                         reg = <0x4805b000 0x200>;
332                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
333                         ti,hwmods = "gpio5";
334                         gpio-controller;
335                         #gpio-cells = <2>;
336                         interrupt-controller;
337                         #interrupt-cells = <2>;
338                 };
339
340                 gpio6: gpio@4805d000 {
341                         compatible = "ti,omap4-gpio";
342                         reg = <0x4805d000 0x200>;
343                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
344                         ti,hwmods = "gpio6";
345                         gpio-controller;
346                         #gpio-cells = <2>;
347                         interrupt-controller;
348                         #interrupt-cells = <2>;
349                 };
350
351                 gpmc: gpmc@50000000 {
352                         compatible = "ti,omap4430-gpmc";
353                         reg = <0x50000000 0x1000>;
354                         #address-cells = <2>;
355                         #size-cells = <1>;
356                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
357                         gpmc,num-cs = <8>;
358                         gpmc,num-waitpins = <4>;
359                         ti,hwmods = "gpmc";
360                         ti,no-idle-on-init;
361                         clocks = <&l3_div_ck>;
362                         clock-names = "fck";
363                 };
364
365                 uart1: serial@4806a000 {
366                         compatible = "ti,omap4-uart";
367                         reg = <0x4806a000 0x100>;
368                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
369                         ti,hwmods = "uart1";
370                         clock-frequency = <48000000>;
371                 };
372
373                 uart2: serial@4806c000 {
374                         compatible = "ti,omap4-uart";
375                         reg = <0x4806c000 0x100>;
376                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
377                         ti,hwmods = "uart2";
378                         clock-frequency = <48000000>;
379                 };
380
381                 uart3: serial@48020000 {
382                         compatible = "ti,omap4-uart";
383                         reg = <0x48020000 0x100>;
384                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
385                         ti,hwmods = "uart3";
386                         clock-frequency = <48000000>;
387                 };
388
389                 uart4: serial@4806e000 {
390                         compatible = "ti,omap4-uart";
391                         reg = <0x4806e000 0x100>;
392                         interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
393                         ti,hwmods = "uart4";
394                         clock-frequency = <48000000>;
395                 };
396
397                 hwspinlock: spinlock@4a0f6000 {
398                         compatible = "ti,omap4-hwspinlock";
399                         reg = <0x4a0f6000 0x1000>;
400                         ti,hwmods = "spinlock";
401                         #hwlock-cells = <1>;
402                 };
403
404                 i2c1: i2c@48070000 {
405                         compatible = "ti,omap4-i2c";
406                         reg = <0x48070000 0x100>;
407                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
408                         #address-cells = <1>;
409                         #size-cells = <0>;
410                         ti,hwmods = "i2c1";
411                 };
412
413                 i2c2: i2c@48072000 {
414                         compatible = "ti,omap4-i2c";
415                         reg = <0x48072000 0x100>;
416                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
417                         #address-cells = <1>;
418                         #size-cells = <0>;
419                         ti,hwmods = "i2c2";
420                 };
421
422                 i2c3: i2c@48060000 {
423                         compatible = "ti,omap4-i2c";
424                         reg = <0x48060000 0x100>;
425                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
426                         #address-cells = <1>;
427                         #size-cells = <0>;
428                         ti,hwmods = "i2c3";
429                 };
430
431                 i2c4: i2c@48350000 {
432                         compatible = "ti,omap4-i2c";
433                         reg = <0x48350000 0x100>;
434                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
435                         #address-cells = <1>;
436                         #size-cells = <0>;
437                         ti,hwmods = "i2c4";
438                 };
439
440                 mcspi1: spi@48098000 {
441                         compatible = "ti,omap4-mcspi";
442                         reg = <0x48098000 0x200>;
443                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
444                         #address-cells = <1>;
445                         #size-cells = <0>;
446                         ti,hwmods = "mcspi1";
447                         ti,spi-num-cs = <4>;
448                         dmas = <&sdma 35>,
449                                <&sdma 36>,
450                                <&sdma 37>,
451                                <&sdma 38>,
452                                <&sdma 39>,
453                                <&sdma 40>,
454                                <&sdma 41>,
455                                <&sdma 42>;
456                         dma-names = "tx0", "rx0", "tx1", "rx1",
457                                     "tx2", "rx2", "tx3", "rx3";
458                 };
459
460                 mcspi2: spi@4809a000 {
461                         compatible = "ti,omap4-mcspi";
462                         reg = <0x4809a000 0x200>;
463                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
464                         #address-cells = <1>;
465                         #size-cells = <0>;
466                         ti,hwmods = "mcspi2";
467                         ti,spi-num-cs = <2>;
468                         dmas = <&sdma 43>,
469                                <&sdma 44>,
470                                <&sdma 45>,
471                                <&sdma 46>;
472                         dma-names = "tx0", "rx0", "tx1", "rx1";
473                 };
474
475                 mcspi3: spi@480b8000 {
476                         compatible = "ti,omap4-mcspi";
477                         reg = <0x480b8000 0x200>;
478                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
479                         #address-cells = <1>;
480                         #size-cells = <0>;
481                         ti,hwmods = "mcspi3";
482                         ti,spi-num-cs = <2>;
483                         dmas = <&sdma 15>, <&sdma 16>;
484                         dma-names = "tx0", "rx0";
485                 };
486
487                 mcspi4: spi@480ba000 {
488                         compatible = "ti,omap4-mcspi";
489                         reg = <0x480ba000 0x200>;
490                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
491                         #address-cells = <1>;
492                         #size-cells = <0>;
493                         ti,hwmods = "mcspi4";
494                         ti,spi-num-cs = <1>;
495                         dmas = <&sdma 70>, <&sdma 71>;
496                         dma-names = "tx0", "rx0";
497                 };
498
499                 mmc1: mmc@4809c000 {
500                         compatible = "ti,omap4-hsmmc";
501                         reg = <0x4809c000 0x400>;
502                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
503                         ti,hwmods = "mmc1";
504                         ti,dual-volt;
505                         ti,needs-special-reset;
506                         dmas = <&sdma 61>, <&sdma 62>;
507                         dma-names = "tx", "rx";
508                         pbias-supply = <&pbias_mmc_reg>;
509                 };
510
511                 mmc2: mmc@480b4000 {
512                         compatible = "ti,omap4-hsmmc";
513                         reg = <0x480b4000 0x400>;
514                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
515                         ti,hwmods = "mmc2";
516                         ti,needs-special-reset;
517                         dmas = <&sdma 47>, <&sdma 48>;
518                         dma-names = "tx", "rx";
519                 };
520
521                 mmc3: mmc@480ad000 {
522                         compatible = "ti,omap4-hsmmc";
523                         reg = <0x480ad000 0x400>;
524                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
525                         ti,hwmods = "mmc3";
526                         ti,needs-special-reset;
527                         dmas = <&sdma 77>, <&sdma 78>;
528                         dma-names = "tx", "rx";
529                 };
530
531                 mmc4: mmc@480d1000 {
532                         compatible = "ti,omap4-hsmmc";
533                         reg = <0x480d1000 0x400>;
534                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
535                         ti,hwmods = "mmc4";
536                         ti,needs-special-reset;
537                         dmas = <&sdma 57>, <&sdma 58>;
538                         dma-names = "tx", "rx";
539                 };
540
541                 mmc5: mmc@480d5000 {
542                         compatible = "ti,omap4-hsmmc";
543                         reg = <0x480d5000 0x400>;
544                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
545                         ti,hwmods = "mmc5";
546                         ti,needs-special-reset;
547                         dmas = <&sdma 59>, <&sdma 60>;
548                         dma-names = "tx", "rx";
549                 };
550
551                 mmu_dsp: mmu@4a066000 {
552                         compatible = "ti,omap4-iommu";
553                         reg = <0x4a066000 0x100>;
554                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
555                         ti,hwmods = "mmu_dsp";
556                         #iommu-cells = <0>;
557                 };
558
559                 mmu_ipu: mmu@55082000 {
560                         compatible = "ti,omap4-iommu";
561                         reg = <0x55082000 0x100>;
562                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
563                         ti,hwmods = "mmu_ipu";
564                         #iommu-cells = <0>;
565                         ti,iommu-bus-err-back;
566                 };
567
568                 wdt2: wdt@4a314000 {
569                         compatible = "ti,omap4-wdt", "ti,omap3-wdt";
570                         reg = <0x4a314000 0x80>;
571                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
572                         ti,hwmods = "wd_timer2";
573                 };
574
575                 mcpdm: mcpdm@40132000 {
576                         compatible = "ti,omap4-mcpdm";
577                         reg = <0x40132000 0x7f>, /* MPU private access */
578                               <0x49032000 0x7f>; /* L3 Interconnect */
579                         reg-names = "mpu", "dma";
580                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
581                         ti,hwmods = "mcpdm";
582                         dmas = <&sdma 65>,
583                                <&sdma 66>;
584                         dma-names = "up_link", "dn_link";
585                         status = "disabled";
586                 };
587
588                 dmic: dmic@4012e000 {
589                         compatible = "ti,omap4-dmic";
590                         reg = <0x4012e000 0x7f>, /* MPU private access */
591                               <0x4902e000 0x7f>; /* L3 Interconnect */
592                         reg-names = "mpu", "dma";
593                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
594                         ti,hwmods = "dmic";
595                         dmas = <&sdma 67>;
596                         dma-names = "up_link";
597                         status = "disabled";
598                 };
599
600                 mcbsp1: mcbsp@40122000 {
601                         compatible = "ti,omap4-mcbsp";
602                         reg = <0x40122000 0xff>, /* MPU private access */
603                               <0x49022000 0xff>; /* L3 Interconnect */
604                         reg-names = "mpu", "dma";
605                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
606                         interrupt-names = "common";
607                         ti,buffer-size = <128>;
608                         ti,hwmods = "mcbsp1";
609                         dmas = <&sdma 33>,
610                                <&sdma 34>;
611                         dma-names = "tx", "rx";
612                         status = "disabled";
613                 };
614
615                 mcbsp2: mcbsp@40124000 {
616                         compatible = "ti,omap4-mcbsp";
617                         reg = <0x40124000 0xff>, /* MPU private access */
618                               <0x49024000 0xff>; /* L3 Interconnect */
619                         reg-names = "mpu", "dma";
620                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
621                         interrupt-names = "common";
622                         ti,buffer-size = <128>;
623                         ti,hwmods = "mcbsp2";
624                         dmas = <&sdma 17>,
625                                <&sdma 18>;
626                         dma-names = "tx", "rx";
627                         status = "disabled";
628                 };
629
630                 mcbsp3: mcbsp@40126000 {
631                         compatible = "ti,omap4-mcbsp";
632                         reg = <0x40126000 0xff>, /* MPU private access */
633                               <0x49026000 0xff>; /* L3 Interconnect */
634                         reg-names = "mpu", "dma";
635                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
636                         interrupt-names = "common";
637                         ti,buffer-size = <128>;
638                         ti,hwmods = "mcbsp3";
639                         dmas = <&sdma 19>,
640                                <&sdma 20>;
641                         dma-names = "tx", "rx";
642                         status = "disabled";
643                 };
644
645                 mcbsp4: mcbsp@48096000 {
646                         compatible = "ti,omap4-mcbsp";
647                         reg = <0x48096000 0xff>; /* L4 Interconnect */
648                         reg-names = "mpu";
649                         interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
650                         interrupt-names = "common";
651                         ti,buffer-size = <128>;
652                         ti,hwmods = "mcbsp4";
653                         dmas = <&sdma 31>,
654                                <&sdma 32>;
655                         dma-names = "tx", "rx";
656                         status = "disabled";
657                 };
658
659                 keypad: keypad@4a31c000 {
660                         compatible = "ti,omap4-keypad";
661                         reg = <0x4a31c000 0x80>;
662                         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
663                         reg-names = "mpu";
664                         ti,hwmods = "kbd";
665                 };
666
667                 dmm@4e000000 {
668                         compatible = "ti,omap4-dmm";
669                         reg = <0x4e000000 0x800>;
670                         interrupts = <0 113 0x4>;
671                         ti,hwmods = "dmm";
672                 };
673
674                 emif1: emif@4c000000 {
675                         compatible = "ti,emif-4d";
676                         reg = <0x4c000000 0x100>;
677                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
678                         ti,hwmods = "emif1";
679                         ti,no-idle-on-init;
680                         phy-type = <1>;
681                         hw-caps-read-idle-ctrl;
682                         hw-caps-ll-interface;
683                         hw-caps-temp-alert;
684                 };
685
686                 emif2: emif@4d000000 {
687                         compatible = "ti,emif-4d";
688                         reg = <0x4d000000 0x100>;
689                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
690                         ti,hwmods = "emif2";
691                         ti,no-idle-on-init;
692                         phy-type = <1>;
693                         hw-caps-read-idle-ctrl;
694                         hw-caps-ll-interface;
695                         hw-caps-temp-alert;
696                 };
697
698                 ocp2scp@4a0ad000 {
699                         compatible = "ti,omap-ocp2scp";
700                         reg = <0x4a0ad000 0x1f>;
701                         #address-cells = <1>;
702                         #size-cells = <1>;
703                         ranges;
704                         ti,hwmods = "ocp2scp_usb_phy";
705                         usb2_phy: usb2phy@4a0ad080 {
706                                 compatible = "ti,omap-usb2";
707                                 reg = <0x4a0ad080 0x58>;
708                                 ctrl-module = <&omap_control_usb2phy>;
709                                 clocks = <&usb_phy_cm_clk32k>;
710                                 clock-names = "wkupclk";
711                                 #phy-cells = <0>;
712                         };
713                 };
714
715                 mailbox: mailbox@4a0f4000 {
716                         compatible = "ti,omap4-mailbox";
717                         reg = <0x4a0f4000 0x200>;
718                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
719                         ti,hwmods = "mailbox";
720                         #mbox-cells = <1>;
721                         ti,mbox-num-users = <3>;
722                         ti,mbox-num-fifos = <8>;
723                         mbox_ipu: mbox_ipu {
724                                 ti,mbox-tx = <0 0 0>;
725                                 ti,mbox-rx = <1 0 0>;
726                         };
727                         mbox_dsp: mbox_dsp {
728                                 ti,mbox-tx = <3 0 0>;
729                                 ti,mbox-rx = <2 0 0>;
730                         };
731                 };
732
733                 timer1: timer@4a318000 {
734                         compatible = "ti,omap3430-timer";
735                         reg = <0x4a318000 0x80>;
736                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
737                         ti,hwmods = "timer1";
738                         ti,timer-alwon;
739                 };
740
741                 timer2: timer@48032000 {
742                         compatible = "ti,omap3430-timer";
743                         reg = <0x48032000 0x80>;
744                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
745                         ti,hwmods = "timer2";
746                 };
747
748                 timer3: timer@48034000 {
749                         compatible = "ti,omap4430-timer";
750                         reg = <0x48034000 0x80>;
751                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
752                         ti,hwmods = "timer3";
753                 };
754
755                 timer4: timer@48036000 {
756                         compatible = "ti,omap4430-timer";
757                         reg = <0x48036000 0x80>;
758                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
759                         ti,hwmods = "timer4";
760                 };
761
762                 timer5: timer@40138000 {
763                         compatible = "ti,omap4430-timer";
764                         reg = <0x40138000 0x80>,
765                               <0x49038000 0x80>;
766                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
767                         ti,hwmods = "timer5";
768                         ti,timer-dsp;
769                 };
770
771                 timer6: timer@4013a000 {
772                         compatible = "ti,omap4430-timer";
773                         reg = <0x4013a000 0x80>,
774                               <0x4903a000 0x80>;
775                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
776                         ti,hwmods = "timer6";
777                         ti,timer-dsp;
778                 };
779
780                 timer7: timer@4013c000 {
781                         compatible = "ti,omap4430-timer";
782                         reg = <0x4013c000 0x80>,
783                               <0x4903c000 0x80>;
784                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
785                         ti,hwmods = "timer7";
786                         ti,timer-dsp;
787                 };
788
789                 timer8: timer@4013e000 {
790                         compatible = "ti,omap4430-timer";
791                         reg = <0x4013e000 0x80>,
792                               <0x4903e000 0x80>;
793                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
794                         ti,hwmods = "timer8";
795                         ti,timer-pwm;
796                         ti,timer-dsp;
797                 };
798
799                 timer9: timer@4803e000 {
800                         compatible = "ti,omap4430-timer";
801                         reg = <0x4803e000 0x80>;
802                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
803                         ti,hwmods = "timer9";
804                         ti,timer-pwm;
805                 };
806
807                 timer10: timer@48086000 {
808                         compatible = "ti,omap3430-timer";
809                         reg = <0x48086000 0x80>;
810                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
811                         ti,hwmods = "timer10";
812                         ti,timer-pwm;
813                 };
814
815                 timer11: timer@48088000 {
816                         compatible = "ti,omap4430-timer";
817                         reg = <0x48088000 0x80>;
818                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
819                         ti,hwmods = "timer11";
820                         ti,timer-pwm;
821                 };
822
823                 usbhstll: usbhstll@4a062000 {
824                         compatible = "ti,usbhs-tll";
825                         reg = <0x4a062000 0x1000>;
826                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
827                         ti,hwmods = "usb_tll_hs";
828                 };
829
830                 usbhshost: usbhshost@4a064000 {
831                         compatible = "ti,usbhs-host";
832                         reg = <0x4a064000 0x800>;
833                         ti,hwmods = "usb_host_hs";
834                         #address-cells = <1>;
835                         #size-cells = <1>;
836                         ranges;
837                         clocks = <&init_60m_fclk>,
838                                  <&xclk60mhsp1_ck>,
839                                  <&xclk60mhsp2_ck>;
840                         clock-names = "refclk_60m_int",
841                                       "refclk_60m_ext_p1",
842                                       "refclk_60m_ext_p2";
843
844                         usbhsohci: ohci@4a064800 {
845                                 compatible = "ti,ohci-omap3";
846                                 reg = <0x4a064800 0x400>;
847                                 interrupt-parent = <&gic>;
848                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
849                         };
850
851                         usbhsehci: ehci@4a064c00 {
852                                 compatible = "ti,ehci-omap";
853                                 reg = <0x4a064c00 0x400>;
854                                 interrupt-parent = <&gic>;
855                                 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
856                         };
857                 };
858
859                 omap_control_usb2phy: control-phy@4a002300 {
860                         compatible = "ti,control-phy-usb2";
861                         reg = <0x4a002300 0x4>;
862                         reg-names = "power";
863                 };
864
865                 omap_control_usbotg: control-phy@4a00233c {
866                         compatible = "ti,control-phy-otghs";
867                         reg = <0x4a00233c 0x4>;
868                         reg-names = "otghs_control";
869                 };
870
871                 usb_otg_hs: usb_otg_hs@4a0ab000 {
872                         compatible = "ti,omap4-musb";
873                         reg = <0x4a0ab000 0x7ff>;
874                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
875                         interrupt-names = "mc", "dma";
876                         ti,hwmods = "usb_otg_hs";
877                         usb-phy = <&usb2_phy>;
878                         phys = <&usb2_phy>;
879                         phy-names = "usb2-phy";
880                         multipoint = <1>;
881                         num-eps = <16>;
882                         ram-bits = <12>;
883                         ctrl-module = <&omap_control_usbotg>;
884                 };
885
886                 aes: aes@4b501000 {
887                         compatible = "ti,omap4-aes";
888                         ti,hwmods = "aes";
889                         reg = <0x4b501000 0xa0>;
890                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
891                         dmas = <&sdma 111>, <&sdma 110>;
892                         dma-names = "tx", "rx";
893                 };
894
895                 des: des@480a5000 {
896                         compatible = "ti,omap4-des";
897                         ti,hwmods = "des";
898                         reg = <0x480a5000 0xa0>;
899                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
900                         dmas = <&sdma 117>, <&sdma 116>;
901                         dma-names = "tx", "rx";
902                 };
903
904                 abb_mpu: regulator-abb-mpu {
905                         compatible = "ti,abb-v2";
906                         regulator-name = "abb_mpu";
907                         #address-cells = <0>;
908                         #size-cells = <0>;
909                         ti,tranxdone-status-mask = <0x80>;
910                         clocks = <&sys_clkin_ck>;
911                         ti,settling-time = <50>;
912                         ti,clock-cycles = <16>;
913
914                         status = "disabled";
915                 };
916
917                 abb_iva: regulator-abb-iva {
918                         compatible = "ti,abb-v2";
919                         regulator-name = "abb_iva";
920                         #address-cells = <0>;
921                         #size-cells = <0>;
922                         ti,tranxdone-status-mask = <0x80000000>;
923                         clocks = <&sys_clkin_ck>;
924                         ti,settling-time = <50>;
925                         ti,clock-cycles = <16>;
926
927                         status = "disabled";
928                 };
929
930                 dss: dss@58000000 {
931                         compatible = "ti,omap4-dss";
932                         reg = <0x58000000 0x80>;
933                         status = "disabled";
934                         ti,hwmods = "dss_core";
935                         clocks = <&dss_dss_clk>;
936                         clock-names = "fck";
937                         #address-cells = <1>;
938                         #size-cells = <1>;
939                         ranges;
940
941                         dispc@58001000 {
942                                 compatible = "ti,omap4-dispc";
943                                 reg = <0x58001000 0x1000>;
944                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
945                                 ti,hwmods = "dss_dispc";
946                                 clocks = <&dss_dss_clk>;
947                                 clock-names = "fck";
948                         };
949
950                         rfbi: encoder@58002000  {
951                                 compatible = "ti,omap4-rfbi";
952                                 reg = <0x58002000 0x1000>;
953                                 status = "disabled";
954                                 ti,hwmods = "dss_rfbi";
955                                 clocks = <&dss_dss_clk>, <&l3_div_ck>;
956                                 clock-names = "fck", "ick";
957                         };
958
959                         venc: encoder@58003000 {
960                                 compatible = "ti,omap4-venc";
961                                 reg = <0x58003000 0x1000>;
962                                 status = "disabled";
963                                 ti,hwmods = "dss_venc";
964                                 clocks = <&dss_tv_clk>;
965                                 clock-names = "fck";
966                         };
967
968                         dsi1: encoder@58004000 {
969                                 compatible = "ti,omap4-dsi";
970                                 reg = <0x58004000 0x200>,
971                                       <0x58004200 0x40>,
972                                       <0x58004300 0x20>;
973                                 reg-names = "proto", "phy", "pll";
974                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
975                                 status = "disabled";
976                                 ti,hwmods = "dss_dsi1";
977                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
978                                 clock-names = "fck", "sys_clk";
979                         };
980
981                         dsi2: encoder@58005000 {
982                                 compatible = "ti,omap4-dsi";
983                                 reg = <0x58005000 0x200>,
984                                       <0x58005200 0x40>,
985                                       <0x58005300 0x20>;
986                                 reg-names = "proto", "phy", "pll";
987                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
988                                 status = "disabled";
989                                 ti,hwmods = "dss_dsi2";
990                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
991                                 clock-names = "fck", "sys_clk";
992                         };
993
994                         hdmi: encoder@58006000 {
995                                 compatible = "ti,omap4-hdmi";
996                                 reg = <0x58006000 0x200>,
997                                       <0x58006200 0x100>,
998                                       <0x58006300 0x100>,
999                                       <0x58006400 0x1000>;
1000                                 reg-names = "wp", "pll", "phy", "core";
1001                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1002                                 status = "disabled";
1003                                 ti,hwmods = "dss_hdmi";
1004                                 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1005                                 clock-names = "fck", "sys_clk";
1006                                 dmas = <&sdma 76>;
1007                                 dma-names = "audio_tx";
1008                         };
1009                 };
1010         };
1011 };
1012
1013 /include/ "omap44xx-clocks.dtsi"