arch/arm/boot/dts/stih407-pinctrl.dtsi

   1 /*
   2  * Copyright (C) 2014 STMicroelectronics Limited.
   3  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "st-pincfg.h"
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 / {
  12
  13         aliases {
  14                 /* 0-5: PIO_SBC */
  15                 gpio0 = &pio0;
  16                 gpio1 = &pio1;
  17                 gpio2 = &pio2;
  18                 gpio3 = &pio3;
  19                 gpio4 = &pio4;
  20                 gpio5 = &pio5;
  21                 /* 10-19: PIO_FRONT0 */
  22                 gpio6 = &pio10;
  23                 gpio7 = &pio11;
  24                 gpio8 = &pio12;
  25                 gpio9 = &pio13;
  26                 gpio10 = &pio14;
  27                 gpio11 = &pio15;
  28                 gpio12 = &pio16;
  29                 gpio13 = &pio17;
  30                 gpio14 = &pio18;
  31                 gpio15 = &pio19;
  32                 /* 20: PIO_FRONT1 */
  33                 gpio16 = &pio20;
  34                 /* 30-35: PIO_REAR */
  35                 gpio17 = &pio30;
  36                 gpio18 = &pio31;
  37                 gpio19 = &pio32;
  38                 gpio20 = &pio33;
  39                 gpio21 = &pio34;
  40                 gpio22 = &pio35;
  41                 /* 40-42: PIO_FLASH */
  42                 gpio23 = &pio40;
  43                 gpio24 = &pio41;
  44                 gpio25 = &pio42;
  45         };
  46
  47         soc {
  48                 pin-controller-sbc {
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         compatible = "st,stih407-sbc-pinctrl";
  52                         st,syscfg = <&syscfg_sbc>;
  53                         reg = <0x0961f080 0x4>;
  54                         reg-names = "irqmux";
  55                         interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
  56                         interrupt-names = "irqmux";
  57                         ranges = <0 0x09610000 0x6000>;
  58
  59                         pio0: gpio@09610000 {
  60                                 gpio-controller;
  61                                 #gpio-cells = <1>;
  62                                 interrupt-controller;
  63                                 #interrupt-cells = <2>;
  64                                 reg = <0x0 0x100>;
  65                                 st,bank-name = "PIO0";
  66                         };
  67                         pio1: gpio@09611000 {
  68                                 gpio-controller;
  69                                 #gpio-cells = <1>;
  70                                 interrupt-controller;
  71                                 #interrupt-cells = <2>;
  72                                 reg = <0x1000 0x100>;
  73                                 st,bank-name = "PIO1";
  74                         };
  75                         pio2: gpio@09612000 {
  76                                 gpio-controller;
  77                                 #gpio-cells = <1>;
  78                                 interrupt-controller;
  79                                 #interrupt-cells = <2>;
  80                                 reg = <0x2000 0x100>;
  81                                 st,bank-name = "PIO2";
  82                         };
  83                         pio3: gpio@09613000 {
  84                                 gpio-controller;
  85                                 #gpio-cells = <1>;
  86                                 interrupt-controller;
  87                                 #interrupt-cells = <2>;
  88                                 reg = <0x3000 0x100>;
  89                                 st,bank-name = "PIO3";
  90                         };
  91                         pio4: gpio@09614000 {
  92                                 gpio-controller;
  93                                 #gpio-cells = <1>;
  94                                 interrupt-controller;
  95                                 #interrupt-cells = <2>;
  96                                 reg = <0x4000 0x100>;
  97                                 st,bank-name = "PIO4";
  98                         };
  99
 100                         pio5: gpio@09615000 {
 101                                 gpio-controller;
 102                                 #gpio-cells = <1>;
 103                                 interrupt-controller;
 104                                 #interrupt-cells = <2>;
 105                                 reg = <0x5000 0x100>;
 106                                 st,bank-name = "PIO5";
 107                                 st,retime-pin-mask = <0x3f>;
 108                         };
 109
 110                         cec0 {
 111                                 pinctrl_cec0_default: cec0-default {
 112                                         st,pins {
 113                                                 hdmi_cec = <&pio2 4 ALT1 BIDIR>;
 114                                         };
 115                                 };
 116                         };
 117
 118                         rc {
 119                                 pinctrl_ir: ir0 {
 120                                         st,pins {
 121                                                 ir = <&pio4 0 ALT2 IN>;
 122                                         };
 123                                 };
 124
 125                                 pinctrl_uhf: uhf0 {
 126                                         st,pins {
 127                                                 ir = <&pio4 1 ALT2 IN>;
 128                                         };
 129                                 };
 130
 131                                 pinctrl_tx: tx0 {
 132                                         st,pins {
 133                                                 tx = <&pio4 2 ALT2 OUT>;
 134                                         };
 135                                 };
 136
 137                                 pinctrl_tx_od: tx_od0 {
 138                                         st,pins {
 139                                                 tx_od = <&pio4 3 ALT2 OUT>;
 140                                         };
 141                                 };
 142                         };
 143
 144                         /* SBC_ASC0 - UART10 */
 145                         sbc_serial0 {
 146                                 pinctrl_sbc_serial0: sbc_serial0-0 {
 147                                         st,pins {
 148                                                 tx = <&pio3 4 ALT1 OUT>;
 149                                                 rx = <&pio3 5 ALT1 IN>;
 150                                         };
 151                                 };
 152                         };
 153                         /* SBC_ASC1 - UART11 */
 154                         sbc_serial1 {
 155                                 pinctrl_sbc_serial1: sbc_serial1-0 {
 156                                         st,pins {
 157                                                 tx = <&pio2 6 ALT3 OUT>;
 158                                                 rx = <&pio2 7 ALT3 IN>;
 159                                         };
 160                                 };
 161                         };
 162
 163                         i2c10 {
 164                                 pinctrl_i2c10_default: i2c10-default {
 165                                         st,pins {
 166                                                 sda = <&pio4 6 ALT1 BIDIR>;
 167                                                 scl = <&pio4 5 ALT1 BIDIR>;
 168                                         };
 169                                 };
 170                         };
 171
 172                         i2c11 {
 173                                 pinctrl_i2c11_default: i2c11-default {
 174                                         st,pins {
 175                                                 sda = <&pio5 1 ALT1 BIDIR>;
 176                                                 scl = <&pio5 0 ALT1 BIDIR>;
 177                                         };
 178                                 };
 179                         };
 180
 181                         keyscan {
 182                                 pinctrl_keyscan: keyscan {
 183                                         st,pins {
 184                                                 keyin0 = <&pio4 0 ALT6 IN>;
 185                                                 keyin1 = <&pio4 5 ALT4 IN>;
 186                                                 keyin2 = <&pio0 4 ALT2 IN>;
 187                                                 keyin3 = <&pio2 6 ALT2 IN>;
 188
 189                                                 keyout0 = <&pio4 6 ALT4 OUT>;
 190                                                 keyout1 = <&pio1 7 ALT2 OUT>;
 191                                                 keyout2 = <&pio0 6 ALT2 OUT>;
 192                                                 keyout3 = <&pio2 7 ALT2 OUT>;
 193                                         };
 194                                 };
 195                         };
 196
 197                         gmac1 {
 198                                 /*
 199                                  * Almost all the boards based on STiH407 SoC have an embedded
 200                                  * switch where the mdio/mdc have been used for managing the SMI
 201                                  * iface via I2C. For this reason these lines can be allocated
 202                                  * by using dedicated configuration (in case of there will be a
 203                                  * standard PHY transceiver on-board).
 204                                  */
 205                                 pinctrl_rgmii1: rgmii1-0 {
 206                                         st,pins {
 207
 208                                                 txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
 209                                                 txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
 210                                                 txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
 211                                                 txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
 212                                                 txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
 213                                                 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
 214                                                 rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
 215                                                 rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
 216                                                 rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
 217                                                 rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
 218                                                 rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
 219                                                 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 220                                                 clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
 221                                                 phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
 222                                         };
 223                                 };
 224
 225                                 pinctrl_rgmii1_mdio: rgmii1-mdio {
 226                                         st,pins {
 227                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
 228                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 229                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 230                                         };
 231                                 };
 232
 233                                 pinctrl_mii1: mii1 {
 234                                         st,pins {
 235                                                 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 236                                                 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 237                                                 txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 238                                                 txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 239                                                 txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 240                                                 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 241                                                 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
 242                                                 col = <&pio0 7 ALT1 IN BYPASS 1000>;
 243
 244                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
 245                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 246                                                 crs = <&pio1 2 ALT1 IN BYPASS 1000>;
 247                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 248                                                 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 249                                                 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 250                                                 rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 251                                                 rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 252
 253                                                 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 254                                                 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 255                                                 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 256                                                 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 257                                         };
 258                                 };
 259
 260                                 pinctrl_rmii1: rmii1-0 {
 261                                         st,pins {
 262                                                 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 263                                                 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 264                                                 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 265                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
 266                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 267                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 268                                                 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
 269                                                 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
 270                                                 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
 271                                                 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 272                                         };
 273                                 };
 274
 275                                 pinctrl_rmii1_phyclk: rmii1_phyclk {
 276                                         st,pins {
 277                                                 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 278                                         };
 279                                 };
 280
 281                                 pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
 282                                         st,pins {
 283                                                 phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
 284                                         };
 285                                 };
 286                         };
 287
 288                         pwm1 {
 289                                 pinctrl_pwm1_chan0_default: pwm1-0-default {
 290                                         st,pins {
 291                                                 pwm-out = <&pio3 0 ALT1 OUT>;
 292                                         };
 293                                 };
 294                                 pinctrl_pwm1_chan1_default: pwm1-1-default {
 295                                         st,pins {
 296                                                 pwm-out = <&pio4 4 ALT1 OUT>;
 297                                         };
 298                                 };
 299                                 pinctrl_pwm1_chan2_default: pwm1-2-default {
 300                                         st,pins {
 301                                                 pwm-out = <&pio4 6 ALT3 OUT>;
 302                                         };
 303                                 };
 304                                 pinctrl_pwm1_chan3_default: pwm1-3-default {
 305                                         st,pins {
 306                                                 pwm-out = <&pio4 7 ALT3 OUT>;
 307                                         };
 308                                 };
 309                         };
 310
 311                         spi10 {
 312                                 pinctrl_spi10_default: spi10-4w-alt1-0 {
 313                                         st,pins {
 314                                                 mtsr = <&pio4 6 ALT1 OUT>;
 315                                                 mrst = <&pio4 7 ALT1 IN>;
 316                                                 scl = <&pio4 5 ALT1 OUT>;
 317                                         };
 318                                 };
 319
 320                                 pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
 321                                         st,pins {
 322                                                 mtsr = <&pio4 6 ALT1 BIDIR_PU>;
 323                                                 scl = <&pio4 5 ALT1 OUT>;
 324                                         };
 325                                 };
 326                         };
 327
 328                         spi11 {
 329                                 pinctrl_spi11_default: spi11-4w-alt2-0 {
 330                                         st,pins {
 331                                                 mtsr = <&pio3 1 ALT2 OUT>;
 332                                                 mrst = <&pio3 0 ALT2 IN>;
 333                                                 scl = <&pio3 2 ALT2 OUT>;
 334                                         };
 335                                 };
 336
 337                                 pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
 338                                         st,pins {
 339                                                 mtsr = <&pio3 1 ALT2 BIDIR_PU>;
 340                                                 scl = <&pio3 2 ALT2 OUT>;
 341                                         };
 342                                 };
 343                         };
 344
 345                         spi12 {
 346                                 pinctrl_spi12_default: spi12-4w-alt2-0 {
 347                                         st,pins {
 348                                                 mtsr = <&pio3 6 ALT2 OUT>;
 349                                                 mrst = <&pio3 4 ALT2 IN>;
 350                                                 scl = <&pio3 7 ALT2 OUT>;
 351                                         };
 352                                 };
 353
 354                                 pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
 355                                         st,pins {
 356                                                 mtsr = <&pio3 6 ALT2 BIDIR_PU>;
 357                                                 scl = <&pio3 7 ALT2 OUT>;
 358                                         };
 359                                 };
 360                         };
 361                 };
 362
 363                 pin-controller-front0 {
 364                         #address-cells = <1>;
 365                         #size-cells = <1>;
 366                         compatible = "st,stih407-front-pinctrl";
 367                         st,syscfg = <&syscfg_front>;
 368                         reg = <0x0920f080 0x4>;
 369                         reg-names = "irqmux";
 370                         interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
 371                         interrupt-names = "irqmux";
 372                         ranges = <0 0x09200000 0x10000>;
 373
 374                         pio10: pio@09200000 {
 375                                 gpio-controller;
 376                                 #gpio-cells = <1>;
 377                                 interrupt-controller;
 378                                 #interrupt-cells = <2>;
 379                                 reg = <0x0 0x100>;
 380                                 st,bank-name = "PIO10";
 381                         };
 382                         pio11: pio@09201000 {
 383                                 gpio-controller;
 384                                 #gpio-cells = <1>;
 385                                 interrupt-controller;
 386                                 #interrupt-cells = <2>;
 387                                 reg = <0x1000 0x100>;
 388                                 st,bank-name = "PIO11";
 389                         };
 390                         pio12: pio@09202000 {
 391                                 gpio-controller;
 392                                 #gpio-cells = <1>;
 393                                 interrupt-controller;
 394                                 #interrupt-cells = <2>;
 395                                 reg = <0x2000 0x100>;
 396                                 st,bank-name = "PIO12";
 397                         };
 398                         pio13: pio@09203000 {
 399                                 gpio-controller;
 400                                 #gpio-cells = <1>;
 401                                 interrupt-controller;
 402                                 #interrupt-cells = <2>;
 403                                 reg = <0x3000 0x100>;
 404                                 st,bank-name = "PIO13";
 405                         };
 406                         pio14: pio@09204000 {
 407                                 gpio-controller;
 408                                 #gpio-cells = <1>;
 409                                 interrupt-controller;
 410                                 #interrupt-cells = <2>;
 411                                 reg = <0x4000 0x100>;
 412                                 st,bank-name = "PIO14";
 413                         };
 414                         pio15: pio@09205000 {
 415                                 gpio-controller;
 416                                 #gpio-cells = <1>;
 417                                 interrupt-controller;
 418                                 #interrupt-cells = <2>;
 419                                 reg = <0x5000 0x100>;
 420                                 st,bank-name = "PIO15";
 421                         };
 422                         pio16: pio@09206000 {
 423                                 gpio-controller;
 424                                 #gpio-cells = <1>;
 425                                 interrupt-controller;
 426                                 #interrupt-cells = <2>;
 427                                 reg = <0x6000 0x100>;
 428                                 st,bank-name = "PIO16";
 429                         };
 430                         pio17: pio@09207000 {
 431                                 gpio-controller;
 432                                 #gpio-cells = <1>;
 433                                 interrupt-controller;
 434                                 #interrupt-cells = <2>;
 435                                 reg = <0x7000 0x100>;
 436                                 st,bank-name = "PIO17";
 437                         };
 438                         pio18: pio@09208000 {
 439                                 gpio-controller;
 440                                 #gpio-cells = <1>;
 441                                 interrupt-controller;
 442                                 #interrupt-cells = <2>;
 443                                 reg = <0x8000 0x100>;
 444                                 st,bank-name = "PIO18";
 445                         };
 446                         pio19: pio@09209000 {
 447                                 gpio-controller;
 448                                 #gpio-cells = <1>;
 449                                 interrupt-controller;
 450                                 #interrupt-cells = <2>;
 451                                 reg = <0x9000 0x100>;
 452                                 st,bank-name = "PIO19";
 453                         };
 454
 455                         /* Comms */
 456                         serial0 {
 457                                 pinctrl_serial0: serial0-0 {
 458                                         st,pins {
 459                                                 tx = <&pio17 0 ALT1 OUT>;
 460                                                 rx = <&pio17 1 ALT1 IN>;
 461                                         };
 462                                 };
 463                         };
 464
 465                         serial1 {
 466                                 pinctrl_serial1: serial1-0 {
 467                                         st,pins {
 468                                                 tx = <&pio16 0 ALT1 OUT>;
 469                                                 rx = <&pio16 1 ALT1 IN>;
 470                                         };
 471                                 };
 472                         };
 473
 474                         serial2 {
 475                                 pinctrl_serial2: serial2-0 {
 476                                         st,pins {
 477                                                 tx = <&pio15 0 ALT1 OUT>;
 478                                                 rx = <&pio15 1 ALT1 IN>;
 479                                         };
 480                                 };
 481                         };
 482
 483                         mmc1 {
 484                                 pinctrl_sd1: sd1-0 {
 485                                         st,pins {
 486                                                 sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
 487                                                 sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
 488                                                 sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
 489                                                 sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
 490                                                 sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
 491                                                 sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
 492                                                 sd_led = <&pio16 6 ALT6 OUT>;
 493                                                 sd_pwren = <&pio16 7 ALT6 OUT>;
 494                                                 sd_cd = <&pio19 0 ALT6 IN>;
 495                                                 sd_wp = <&pio19 1 ALT6 IN>;
 496                                         };
 497                                 };
 498                         };
 499
 500
 501                         i2c0 {
 502                                 pinctrl_i2c0_default: i2c0-default {
 503                                         st,pins {
 504                                                 sda = <&pio10 6 ALT2 BIDIR>;
 505                                                 scl = <&pio10 5 ALT2 BIDIR>;
 506                                         };
 507                                 };
 508                         };
 509
 510                         i2c1 {
 511                                 pinctrl_i2c1_default: i2c1-default {
 512                                         st,pins {
 513                                                 sda = <&pio11 1 ALT2 BIDIR>;
 514                                                 scl = <&pio11 0 ALT2 BIDIR>;
 515                                         };
 516                                 };
 517                         };
 518
 519                         i2c2 {
 520                                 pinctrl_i2c2_default: i2c2-default {
 521                                         st,pins {
 522                                                 sda = <&pio15 6 ALT2 BIDIR>;
 523                                                 scl = <&pio15 5 ALT2 BIDIR>;
 524                                         };
 525                                 };
 526                         };
 527
 528                         i2c3 {
 529                                 pinctrl_i2c3_default: i2c3-alt1-0 {
 530                                         st,pins {
 531                                                 sda = <&pio18 6 ALT1 BIDIR>;
 532                                                 scl = <&pio18 5 ALT1 BIDIR>;
 533                                         };
 534                                 };
 535                                 pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
 536                                         st,pins {
 537                                                 sda = <&pio17 7 ALT1 BIDIR>;
 538                                                 scl = <&pio17 6 ALT1 BIDIR>;
 539                                         };
 540                                 };
 541                                 pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
 542                                         st,pins {
 543                                                 sda = <&pio13 6 ALT3 BIDIR>;
 544                                                 scl = <&pio13 5 ALT3 BIDIR>;
 545                                         };
 546                                 };
 547                         };
 548
 549                         spi0 {
 550                                 pinctrl_spi0_default: spi0-4w-alt2-0 {
 551                                         st,pins {
 552                                                 mtsr = <&pio10 6 ALT2 OUT>;
 553                                                 mrst = <&pio10 7 ALT2 IN>;
 554                                                 scl = <&pio10 5 ALT2 OUT>;
 555                                         };
 556                                 };
 557
 558                                 pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
 559                                         st,pins {
 560                                                 mtsr = <&pio10 6 ALT2 BIDIR_PU>;
 561                                                 scl = <&pio10 5 ALT2 OUT>;
 562                                         };
 563                                 };
 564
 565                                 pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
 566                                         st,pins {
 567                                                 mtsr = <&pio19 7 ALT1 OUT>;
 568                                                 mrst = <&pio19 5 ALT1 IN>;
 569                                                 scl = <&pio19 6 ALT1 OUT>;
 570                                         };
 571                                 };
 572
 573                                 pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
 574                                         st,pins {
 575                                                 mtsr = <&pio19 7 ALT1 BIDIR_PU>;
 576                                                 scl = <&pio19 6 ALT1 OUT>;
 577                                         };
 578                                 };
 579                         };
 580
 581                         spi1 {
 582                                 pinctrl_spi1_default: spi1-4w-alt2-0 {
 583                                         st,pins {
 584                                                 mtsr = <&pio11 1 ALT2 OUT>;
 585                                                 mrst = <&pio11 2 ALT2 IN>;
 586                                                 scl = <&pio11 0 ALT2 OUT>;
 587                                         };
 588                                 };
 589
 590                                 pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
 591                                         st,pins {
 592                                                 mtsr = <&pio11 1 ALT2 BIDIR_PU>;
 593                                                 scl = <&pio11 0 ALT2 OUT>;
 594                                         };
 595                                 };
 596
 597                                 pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
 598                                         st,pins {
 599                                                 mtsr = <&pio14 3 ALT1 OUT>;
 600                                                 mrst = <&pio14 4 ALT1 IN>;
 601                                                 scl = <&pio14 2 ALT1 OUT>;
 602                                         };
 603                                 };
 604
 605                                 pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
 606                                         st,pins {
 607                                                 mtsr = <&pio14 3 ALT1 BIDIR_PU>;
 608                                                 scl = <&pio14 2 ALT1 OUT>;
 609                                         };
 610                                 };
 611                         };
 612
 613                         spi2 {
 614                                 pinctrl_spi2_default: spi2-4w-alt2-0 {
 615                                         st,pins {
 616                                                 mtsr = <&pio12 6 ALT2 OUT>;
 617                                                 mrst = <&pio12 7 ALT2 IN>;
 618                                                 scl = <&pio12 5 ALT2 OUT>;
 619                                         };
 620                                 };
 621
 622                                 pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
 623                                         st,pins {
 624                                                 mtsr = <&pio12 6 ALT2 BIDIR_PU>;
 625                                                 scl = <&pio12 5 ALT2 OUT>;
 626                                         };
 627                                 };
 628
 629                                 pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
 630                                         st,pins {
 631                                                 mtsr = <&pio14 6 ALT1 OUT>;
 632                                                 mrst = <&pio14 7 ALT1 IN>;
 633                                                 scl = <&pio14 5 ALT1 OUT>;
 634                                         };
 635                                 };
 636
 637                                 pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
 638                                         st,pins {
 639                                                 mtsr = <&pio14 6 ALT1 BIDIR_PU>;
 640                                                 scl = <&pio14 5 ALT1 OUT>;
 641                                         };
 642                                 };
 643
 644                                 pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
 645                                         st,pins {
 646                                                 mtsr = <&pio15 6 ALT2 OUT>;
 647                                                 mrst = <&pio15 7 ALT2 IN>;
 648                                                 scl = <&pio15 5 ALT2 OUT>;
 649                                         };
 650                                 };
 651
 652                                 pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
 653                                         st,pins {
 654                                                 mtsr = <&pio15 6 ALT2 BIDIR_PU>;
 655                                                 scl = <&pio15 5 ALT2 OUT>;
 656                                         };
 657                                 };
 658                         };
 659
 660                         spi3 {
 661                                 pinctrl_spi3_default: spi3-4w-alt3-0 {
 662                                         st,pins {
 663                                                 mtsr = <&pio13 6 ALT3 OUT>;
 664                                                 mrst = <&pio13 7 ALT3 IN>;
 665                                                 scl = <&pio13 5 ALT3 OUT>;
 666                                         };
 667                                 };
 668
 669                                 pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
 670                                         st,pins {
 671                                                 mtsr = <&pio13 6 ALT3 BIDIR_PU>;
 672                                                 scl = <&pio13 5 ALT3 OUT>;
 673                                         };
 674                                 };
 675
 676                                 pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
 677                                         st,pins {
 678                                                 mtsr = <&pio17 7 ALT1 OUT>;
 679                                                 mrst = <&pio17 5 ALT1 IN>;
 680                                                 scl = <&pio17 6 ALT1 OUT>;
 681                                         };
 682                                 };
 683
 684                                 pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
 685                                         st,pins {
 686                                                 mtsr = <&pio17 7 ALT1 BIDIR_PU>;
 687                                                 scl = <&pio17 6 ALT1 OUT>;
 688                                         };
 689                                 };
 690
 691                                 pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
 692                                         st,pins {
 693                                                 mtsr = <&pio18 6 ALT1 OUT>;
 694                                                 mrst = <&pio18 7 ALT1 IN>;
 695                                                 scl = <&pio18 5 ALT1 OUT>;
 696                                         };
 697                                 };
 698
 699                                 pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
 700                                         st,pins {
 701                                                 mtsr = <&pio18 6 ALT1 BIDIR_PU>;
 702                                                 scl = <&pio18 5 ALT1 OUT>;
 703                                         };
 704                                 };
 705                         };
 706
 707                         tsin0 {
 708                                 pinctrl_tsin0_parallel: tsin0_parallel {
 709                                         st,pins {
 710                                                 DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 711                                                 DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 712                                                 DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 713                                                 DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 714                                                 DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 715                                                 DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 716                                                 DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 717                                                 DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 718                                                 CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 719                                                 VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 720                                                 ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 721                                                 PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 722                                         };
 723                                 };
 724                                 pinctrl_tsin0_serial: tsin0_serial {
 725                                         st,pins {
 726                                                 DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 727                                                 CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 728                                                 VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 729                                                 ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 730                                                 PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 731                                         };
 732                                 };
 733                         };
 734
 735                         tsin1 {
 736                                 pinctrl_tsin1_parallel: tsin1_parallel {
 737                                         st,pins {
 738                                                 DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 739                                                 DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 740                                                 DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 741                                                 DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 742                                                 DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 743                                                 DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 744                                                 DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 745                                                 DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 746                                                 CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
 747                                                 VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 748                                                 ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 749                                                 PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 750                                         };
 751                                 };
 752                                 pinctrl_tsin1_serial: tsin1_serial {
 753                                         st,pins {
 754                                                 DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 755                                                 CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
 756                                                 VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 757                                                 ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 758                                                 PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 759                                         };
 760                                 };
 761                         };
 762
 763                         tsin2 {
 764                                 pinctrl_tsin2_parallel: tsin2_parallel {
 765                                         st,pins {
 766                                                 DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 767                                                 DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 768                                                 DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 769                                                 DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 770                                                 DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 771                                                 DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 772                                                 DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 773                                                 DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 774                                                 CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 775                                                 VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 776                                                 ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 777                                                 PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 778                                         };
 779                                 };
 780                                 pinctrl_tsin2_serial: tsin2_serial {
 781                                         st,pins {
 782                                                 DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 783                                                 CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 784                                                 VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 785                                                 ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 786                                                 PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 787                                         };
 788                                 };
 789                         };
 790
 791                         tsin3 {
 792                                 pinctrl_tsin3_serial: tsin3_serial {
 793                                         st,pins {
 794                                                 DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 795                                                 CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
 796                                                 VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 797                                                 ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 798                                                 PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 799                                         };
 800                                 };
 801                         };
 802
 803                         tsin4 {
 804                                 pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
 805                                         st,pins {
 806                                                 DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 807                                                 CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
 808                                                 VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
 809                                                 ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
 810                                                 PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 811                                         };
 812                                 };
 813                         };
 814
 815                         tsin5 {
 816                                 pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
 817                                         st,pins {
 818                                                 DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 819                                                 CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 820                                                 VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 821                                                 ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 822                                                 PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 823                                         };
 824                                 };
 825                                 pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
 826                                         st,pins {
 827                                                 DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 828                                                 CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
 829                                                 VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 830                                                 ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 831                                                 PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 832                                         };
 833                                 };
 834                         };
 835
 836                         tsout0 {
 837                                 pinctrl_tsout0_parallel: tsout0_parallel {
 838                                         st,pins {
 839                                                 DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 840                                                 DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 841                                                 DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 842                                                 DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 843                                                 DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 844                                                 DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 845                                                 DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 846                                                 DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 847                                                 CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
 848                                                 VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 849                                                 ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 850                                                 PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 851                                         };
 852                                 };
 853                                 pinctrl_tsout0_serial: tsout0_serial {
 854                                         st,pins {
 855                                                 DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 856                                                 CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
 857                                                 VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 858                                                 ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 859                                                 PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 860                                         };
 861                                 };
 862                         };
 863
 864                         tsout1 {
 865                                 pinctrl_tsout1_serial: tsout1_serial {
 866                                         st,pins {
 867                                                 DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 868                                                 CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
 869                                                 VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 870                                                 ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 871                                                 PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 872                                         };
 873                                 };
 874                         };
 875
 876                         mtsin0 {
 877                                 pinctrl_mtsin0_parallel: mtsin0_parallel {
 878                                         st,pins {
 879                                                 DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 880                                                 DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 881                                                 DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 882                                                 DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 883                                                 DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 884                                                 DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 885                                                 DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 886                                                 DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 887                                                 CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
 888                                                 VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 889                                                 ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 890                                                 PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 891                                         };
 892                                 };
 893                         };
 894
 895                         systrace {
 896                                 pinctrl_systrace_default: systrace-default {
 897                                         st,pins {
 898                                                 trc_data0 = <&pio11 3 ALT5 OUT>;
 899                                                 trc_data1 = <&pio11 4 ALT5 OUT>;
 900                                                 trc_data2 = <&pio11 5 ALT5 OUT>;
 901                                                 trc_data3 = <&pio11 6 ALT5 OUT>;
 902                                                 trc_clk   = <&pio11 7 ALT5 OUT>;
 903                                         };
 904                                 };
 905                         };
 906                 };
 907
 908                 pin-controller-front1 {
 909                         #address-cells = <1>;
 910                         #size-cells = <1>;
 911                         compatible = "st,stih407-front-pinctrl";
 912                         st,syscfg = <&syscfg_front>;
 913                         reg = <0x0921f080 0x4>;
 914                         reg-names = "irqmux";
 915                         interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
 916                         interrupt-names = "irqmux";
 917                         ranges = <0 0x09210000 0x10000>;
 918
 919                         tsin4 {
 920                                 pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
 921                                         st,pins {
 922                                                 DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 923                                                 CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 924                                                 VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 925                                                 ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 926                                                 PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 927                                         };
 928                                 };
 929                         };
 930
 931                         pio20: pio@09210000 {
 932                                 gpio-controller;
 933                                 #gpio-cells = <1>;
 934                                 interrupt-controller;
 935                                 #interrupt-cells = <2>;
 936                                 reg = <0x0 0x100>;
 937                                 st,bank-name = "PIO20";
 938                         };
 939                 };
 940
 941                 pin-controller-rear {
 942                         #address-cells = <1>;
 943                         #size-cells = <1>;
 944                         compatible = "st,stih407-rear-pinctrl";
 945                         st,syscfg = <&syscfg_rear>;
 946                         reg = <0x0922f080 0x4>;
 947                         reg-names = "irqmux";
 948                         interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
 949                         interrupt-names = "irqmux";
 950                         ranges = <0 0x09220000 0x6000>;
 951
 952                         pio30: gpio@09220000 {
 953                                 gpio-controller;
 954                                 #gpio-cells = <1>;
 955                                 interrupt-controller;
 956                                 #interrupt-cells = <2>;
 957                                 reg = <0x0 0x100>;
 958                                 st,bank-name = "PIO30";
 959                         };
 960                         pio31: gpio@09221000 {
 961                                 gpio-controller;
 962                                 #gpio-cells = <1>;
 963                                 interrupt-controller;
 964                                 #interrupt-cells = <2>;
 965                                 reg = <0x1000 0x100>;
 966                                 st,bank-name = "PIO31";
 967                         };
 968                         pio32: gpio@09222000 {
 969                                 gpio-controller;
 970                                 #gpio-cells = <1>;
 971                                 interrupt-controller;
 972                                 #interrupt-cells = <2>;
 973                                 reg = <0x2000 0x100>;
 974                                 st,bank-name = "PIO32";
 975                         };
 976                         pio33: gpio@09223000 {
 977                                 gpio-controller;
 978                                 #gpio-cells = <1>;
 979                                 interrupt-controller;
 980                                 #interrupt-cells = <2>;
 981                                 reg = <0x3000 0x100>;
 982                                 st,bank-name = "PIO33";
 983                         };
 984                         pio34: gpio@09224000 {
 985                                 gpio-controller;
 986                                 #gpio-cells = <1>;
 987                                 interrupt-controller;
 988                                 #interrupt-cells = <2>;
 989                                 reg = <0x4000 0x100>;
 990                                 st,bank-name = "PIO34";
 991                         };
 992                         pio35: gpio@09225000 {
 993                                 gpio-controller;
 994                                 #gpio-cells = <1>;
 995                                 interrupt-controller;
 996                                 #interrupt-cells = <2>;
 997                                 reg = <0x5000 0x100>;
 998                                 st,bank-name = "PIO35";
 999                                 st,retime-pin-mask = <0x7f>;
1000                         };
1001
1002                         i2c4 {
1003                                 pinctrl_i2c4_default: i2c4-default {
1004                                         st,pins {
1005                                                 sda = <&pio30 1 ALT1 BIDIR>;
1006                                                 scl = <&pio30 0 ALT1 BIDIR>;
1007                                         };
1008                                 };
1009                         };
1010
1011                         i2c5 {
1012                                 pinctrl_i2c5_default: i2c5-default {
1013                                         st,pins {
1014                                                 sda = <&pio34 4 ALT1 BIDIR>;
1015                                                 scl = <&pio34 3 ALT1 BIDIR>;
1016                                         };
1017                                 };
1018                         };
1019
1020                         usb3 {
1021                                 pinctrl_usb3: usb3-2 {
1022                                         st,pins {
1023                                                 usb-oc-detect = <&pio35 4 ALT1 IN>;
1024                                                 usb-pwr-enable = <&pio35 5 ALT1 OUT>;
1025                                                 usb-vbus-valid = <&pio35 6 ALT1 IN>;
1026                                         };
1027                                 };
1028                         };
1029
1030                         pwm0 {
1031                                 pinctrl_pwm0_chan0_default: pwm0-0-default {
1032                                         st,pins {
1033                                                 pwm-out = <&pio31 1 ALT1 OUT>;
1034                                         };
1035                                 };
1036                         };
1037
1038                         spi4 {
1039                                 pinctrl_spi4_default: spi4-4w-alt1-0 {
1040                                         st,pins {
1041                                                 mtsr = <&pio30 1 ALT1 OUT>;
1042                                                 mrst = <&pio30 2 ALT1 IN>;
1043                                                 scl = <&pio30 0 ALT1 OUT>;
1044                                         };
1045                                 };
1046
1047                                 pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
1048                                         st,pins {
1049                                                 mtsr = <&pio30 1 ALT1 BIDIR_PU>;
1050                                                 scl = <&pio30 0 ALT1 OUT>;
1051                                         };
1052                                 };
1053
1054                                 pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
1055                                         st,pins {
1056                                                 mtsr = <&pio34 1 ALT3 OUT>;
1057                                                 mrst = <&pio34 2 ALT3 IN>;
1058                                                 scl = <&pio34 0 ALT3 OUT>;
1059                                         };
1060                                 };
1061
1062                                 pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
1063                                         st,pins {
1064                                                 mtsr = <&pio34 1 ALT3 BIDIR_PU>;
1065                                                 scl = <&pio34 0 ALT3 OUT>;
1066                                         };
1067                                 };
1068                         };
1069
1070                         serial3 {
1071                                 pinctrl_serial3: serial3-0 {
1072                                         st,pins {
1073                                                 tx = <&pio31 3 ALT1 OUT>;
1074                                                 rx = <&pio31 4 ALT1 IN>;
1075                                         };
1076                                 };
1077                         };
1078                 };
1079
1080                 pin-controller-flash {
1081                         #address-cells = <1>;
1082                         #size-cells = <1>;
1083                         compatible = "st,stih407-flash-pinctrl";
1084                         st,syscfg = <&syscfg_flash>;
1085                         reg = <0x0923f080 0x4>;
1086                         reg-names = "irqmux";
1087                         interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
1088                         interrupts-names = "irqmux";
1089                         ranges = <0 0x09230000 0x3000>;
1090
1091                         pio40: gpio@09230000 {
1092                                 gpio-controller;
1093                                 #gpio-cells = <1>;
1094                                 interrupt-controller;
1095                                 #interrupt-cells = <2>;
1096                                 reg = <0 0x100>;
1097                                 st,bank-name = "PIO40";
1098                         };
1099                         pio41: gpio@09231000 {
1100                                 gpio-controller;
1101                                 #gpio-cells = <1>;
1102                                 interrupt-controller;
1103                                 #interrupt-cells = <2>;
1104                                 reg = <0x1000 0x100>;
1105                                 st,bank-name = "PIO41";
1106                         };
1107                         pio42: gpio@09232000 {
1108                                 gpio-controller;
1109                                 #gpio-cells = <1>;
1110                                 interrupt-controller;
1111                                 #interrupt-cells = <2>;
1112                                 reg = <0x2000 0x100>;
1113                                 st,bank-name = "PIO42";
1114                         };
1115
1116                         mmc0 {
1117                                 pinctrl_mmc0: mmc0-0 {
1118                                         st,pins {
1119                                                 emmc_clk = <&pio40 6 ALT1 BIDIR>;
1120                                                 emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
1121                                                 emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
1122                                                 emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
1123                                                 emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
1124                                                 emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
1125                                                 emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
1126                                                 emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
1127                                                 emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
1128                                                 emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
1129                                         };
1130                                 };
1131                                 pinctrl_sd0: sd0-0 {
1132                                         st,pins {
1133                                                 sd_clk = <&pio40 6 ALT1 BIDIR>;
1134                                                 sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
1135                                                 sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
1136                                                 sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
1137                                                 sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
1138                                                 sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
1139                                                 sd_led = <&pio42 0 ALT2 OUT>;
1140                                                 sd_pwren = <&pio42 2 ALT2 OUT>;
1141                                                 sd_vsel = <&pio42 3 ALT2 OUT>;
1142                                                 sd_cd = <&pio42 4 ALT2 IN>;
1143                                                 sd_wp = <&pio42 5 ALT2 IN>;
1144                                         };
1145                                 };
1146                         };
1147
1148                         fsm {
1149                                 pinctrl_fsm: fsm {
1150                                         st,pins {
1151                                                 spi-fsm-clk = <&pio40 1 ALT1 OUT>;
1152                                                 spi-fsm-cs = <&pio40 0 ALT1 OUT>;
1153                                                 spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
1154                                                 spi-fsm-miso = <&pio40 3 ALT1 IN>;
1155                                                 spi-fsm-hol = <&pio40 5 ALT1 OUT>;
1156                                                 spi-fsm-wp = <&pio40 4 ALT1 OUT>;
1157                                         };
1158                                 };
1159                         };
1160
1161                         nand {
1162                                 pinctrl_nand: nand {
1163                                         st,pins {
1164                                                 nand_cs1 = <&pio40 6 ALT3 OUT>;
1165                                                 nand_cs0 = <&pio40 7 ALT3 OUT>;
1166                                                 nand_d0 = <&pio41 0 ALT3 BIDIR>;
1167                                                 nand_d1 = <&pio41 1 ALT3 BIDIR>;
1168                                                 nand_d2 = <&pio41 2 ALT3 BIDIR>;
1169                                                 nand_d3 = <&pio41 3 ALT3 BIDIR>;
1170                                                 nand_d4 = <&pio41 4 ALT3 BIDIR>;
1171                                                 nand_d5 = <&pio41 5 ALT3 BIDIR>;
1172                                                 nand_d6 = <&pio41 6 ALT3 BIDIR>;
1173                                                 nand_d7 = <&pio41 7 ALT3 BIDIR>;
1174                                                 nand_we = <&pio42 0 ALT3 OUT>;
1175                                                 nand_dqs = <&pio42 1 ALT3 OUT>;
1176                                                 nand_ale = <&pio42 2 ALT3 OUT>;
1177                                                 nand_cle = <&pio42 3 ALT3 OUT>;
1178                                                 nand_rnb = <&pio42 4 ALT3 IN>;
1179                                                 nand_oe = <&pio42 5 ALT3 OUT>;
1180                                         };
1181                                 };
1182                         };
1183                 };
1184         };
1185 };