arch/arm/mach-pxa/viper.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/viper.c
   3  *
   4  *  Support for the Arcom VIPER SBC.
   5  *
   6  *  Author:     Ian Campbell
   7  *  Created:    Feb 03, 2003
   8  *  Copyright:  Arcom Control Systems
   9  *
  10  *  Maintained by Marc Zyngier <maz@misterjones.org>
  11  *                             <marc.zyngier@altran.com>
  12  *
  13  * Based on lubbock.c:
  14  *  Author:     Nicolas Pitre
  15  *  Created:    Jun 15, 2001
  16  *  Copyright:  MontaVista Software Inc.
  17  *
  18  *  This program is free software; you can redistribute it and/or modify
  19  *  it under the terms of the GNU General Public License version 2 as
  20  *  published by the Free Software Foundation.
  21  */
  22
  23 #include <linux/types.h>
  24 #include <linux/memory.h>
  25 #include <linux/cpu.h>
  26 #include <linux/cpufreq.h>
  27 #include <linux/delay.h>
  28 #include <linux/fs.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/major.h>
  33 #include <linux/module.h>
  34 #include <linux/pm.h>
  35 #include <linux/sched.h>
  36 #include <linux/gpio.h>
  37 #include <linux/jiffies.h>
  38 #include <linux/i2c-gpio.h>
  39 #include <linux/i2c/pxa-i2c.h>
  40 #include <linux/serial_8250.h>
  41 #include <linux/smc91x.h>
  42 #include <linux/pwm.h>
  43 #include <linux/pwm_backlight.h>
  44 #include <linux/usb/isp116x.h>
  45 #include <linux/mtd/mtd.h>
  46 #include <linux/mtd/partitions.h>
  47 #include <linux/mtd/physmap.h>
  48 #include <linux/syscore_ops.h>
  49
  50 #include <mach/pxa25x.h>
  51 #include <mach/audio.h>
  52 #include <linux/platform_data/video-pxafb.h>
  53 #include <mach/regs-uart.h>
  54 #include <linux/platform_data/pcmcia-pxa2xx_viper.h>
  55 #include <mach/viper.h>
  56
  57 #include <asm/setup.h>
  58 #include <asm/mach-types.h>
  59 #include <asm/irq.h>
  60 #include <asm/sizes.h>
  61 #include <asm/system_info.h>
  62
  63 #include <asm/mach/arch.h>
  64 #include <asm/mach/map.h>
  65 #include <asm/mach/irq.h>
  66
  67 #include "generic.h"
  68 #include "devices.h"
  69
  70 static unsigned int icr;
  71
  72 static void viper_icr_set_bit(unsigned int bit)
  73 {
  74         icr |= bit;
  75         VIPER_ICR = icr;
  76 }
  77
  78 static void viper_icr_clear_bit(unsigned int bit)
  79 {
  80         icr &= ~bit;
  81         VIPER_ICR = icr;
  82 }
  83
  84 /* This function is used from the pcmcia module to reset the CF */
  85 static void viper_cf_reset(int state)
  86 {
  87         if (state)
  88                 viper_icr_set_bit(VIPER_ICR_CF_RST);
  89         else
  90                 viper_icr_clear_bit(VIPER_ICR_CF_RST);
  91 }
  92
  93 static struct arcom_pcmcia_pdata viper_pcmcia_info = {
  94         .cd_gpio        = VIPER_CF_CD_GPIO,
  95         .rdy_gpio       = VIPER_CF_RDY_GPIO,
  96         .pwr_gpio       = VIPER_CF_POWER_GPIO,
  97         .reset          = viper_cf_reset,
  98 };
  99
 100 static struct platform_device viper_pcmcia_device = {
 101         .name           = "viper-pcmcia",
 102         .id             = -1,
 103         .dev            = {
 104                 .platform_data  = &viper_pcmcia_info,
 105         },
 106 };
 107
 108 /*
 109  * The CPLD version register was not present on VIPER boards prior to
 110  * v2i1. On v1 boards where the version register is not present we
 111  * will just read back the previous value from the databus.
 112  *
 113  * Therefore we do two reads. The first time we write 0 to the
 114  * (read-only) register before reading and the second time we write
 115  * 0xff first. If the two reads do not match or they read back as 0xff
 116  * or 0x00 then we have version 1 hardware.
 117  */
 118 static u8 viper_hw_version(void)
 119 {
 120         u8 v1, v2;
 121         unsigned long flags;
 122
 123         local_irq_save(flags);
 124
 125         VIPER_VERSION = 0;
 126         v1 = VIPER_VERSION;
 127         VIPER_VERSION = 0xff;
 128         v2 = VIPER_VERSION;
 129
 130         v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
 131
 132         local_irq_restore(flags);
 133         return v1;
 134 }
 135
 136 /* CPU system core operations. */
 137 static int viper_cpu_suspend(void)
 138 {
 139         viper_icr_set_bit(VIPER_ICR_R_DIS);
 140         return 0;
 141 }
 142
 143 static void viper_cpu_resume(void)
 144 {
 145         viper_icr_clear_bit(VIPER_ICR_R_DIS);
 146 }
 147
 148 static struct syscore_ops viper_cpu_syscore_ops = {
 149         .suspend        = viper_cpu_suspend,
 150         .resume         = viper_cpu_resume,
 151 };
 152
 153 static unsigned int current_voltage_divisor;
 154
 155 /*
 156  * If force is not true then step from existing to new divisor. If
 157  * force is true then jump straight to the new divisor. Stepping is
 158  * used because if the jump in voltage is too large, the VCC can dip
 159  * too low and the regulator cuts out.
 160  *
 161  * force can be used to initialize the divisor to a know state by
 162  * setting the value for the current clock speed, since we are already
 163  * running at that speed we know the voltage should be pretty close so
 164  * the jump won't be too large
 165  */
 166 static void viper_set_core_cpu_voltage(unsigned long khz, int force)
 167 {
 168         int i = 0;
 169         unsigned int divisor = 0;
 170         const char *v;
 171
 172         if (khz < 200000) {
 173                 v = "1.0"; divisor = 0xfff;
 174         } else if (khz < 300000) {
 175                 v = "1.1"; divisor = 0xde5;
 176         } else {
 177                 v = "1.3"; divisor = 0x325;
 178         }
 179
 180         pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
 181                  v, (int)khz / 1000, (int)khz % 1000);
 182
 183 #define STEP 0x100
 184         do {
 185                 int step;
 186
 187                 if (force)
 188                         step = divisor;
 189                 else if (current_voltage_divisor < divisor - STEP)
 190                         step = current_voltage_divisor + STEP;
 191                 else if (current_voltage_divisor > divisor + STEP)
 192                         step = current_voltage_divisor - STEP;
 193                 else
 194                         step = divisor;
 195                 force = 0;
 196
 197                 gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
 198                 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
 199
 200                 for (i = 1 << 11 ; i > 0 ; i >>= 1) {
 201                         udelay(1);
 202
 203                         gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
 204                         udelay(1);
 205
 206                         gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
 207                         udelay(1);
 208
 209                         gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
 210                 }
 211                 udelay(1);
 212
 213                 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
 214                 udelay(1);
 215
 216                 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
 217
 218                 current_voltage_divisor = step;
 219         } while (current_voltage_divisor != divisor);
 220 }
 221
 222 /* Interrupt handling */
 223 static unsigned long viper_irq_enabled_mask;
 224 static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
 225 static const int viper_isa_irq_map[] = {
 226         0,              /* ISA irq #0, invalid */
 227         0,              /* ISA irq #1, invalid */
 228         0,              /* ISA irq #2, invalid */
 229         1 << 0,         /* ISA irq #3 */
 230         1 << 1,         /* ISA irq #4 */
 231         1 << 2,         /* ISA irq #5 */
 232         1 << 3,         /* ISA irq #6 */
 233         1 << 4,         /* ISA irq #7 */
 234         0,              /* ISA irq #8, invalid */
 235         1 << 8,         /* ISA irq #9 */
 236         1 << 5,         /* ISA irq #10 */
 237         1 << 6,         /* ISA irq #11 */
 238         1 << 7,         /* ISA irq #12 */
 239         0,              /* ISA irq #13, invalid */
 240         1 << 9,         /* ISA irq #14 */
 241         1 << 10,        /* ISA irq #15 */
 242 };
 243
 244 static inline int viper_irq_to_bitmask(unsigned int irq)
 245 {
 246         return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
 247 }
 248
 249 static inline int viper_bit_to_irq(int bit)
 250 {
 251         return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
 252 }
 253
 254 static void viper_ack_irq(struct irq_data *d)
 255 {
 256         int viper_irq = viper_irq_to_bitmask(d->irq);
 257
 258         if (viper_irq & 0xff)
 259                 VIPER_LO_IRQ_STATUS = viper_irq;
 260         else
 261                 VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
 262 }
 263
 264 static void viper_mask_irq(struct irq_data *d)
 265 {
 266         viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
 267 }
 268
 269 static void viper_unmask_irq(struct irq_data *d)
 270 {
 271         viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
 272 }
 273
 274 static inline unsigned long viper_irq_pending(void)
 275 {
 276         return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
 277                         viper_irq_enabled_mask;
 278 }
 279
 280 static void viper_irq_handler(struct irq_desc *desc)
 281 {
 282         unsigned int irq;
 283         unsigned long pending;
 284
 285         pending = viper_irq_pending();
 286         do {
 287                 /* we're in a chained irq handler,
 288                  * so ack the interrupt by hand */
 289                 desc->irq_data.chip->irq_ack(&desc->irq_data);
 290
 291                 if (likely(pending)) {
 292                         irq = viper_bit_to_irq(__ffs(pending));
 293                         generic_handle_irq(irq);
 294                 }
 295                 pending = viper_irq_pending();
 296         } while (pending);
 297 }
 298
 299 static struct irq_chip viper_irq_chip = {
 300         .name           = "ISA",
 301         .irq_ack        = viper_ack_irq,
 302         .irq_mask       = viper_mask_irq,
 303         .irq_unmask     = viper_unmask_irq
 304 };
 305
 306 static void __init viper_init_irq(void)
 307 {
 308         int level;
 309         int isa_irq;
 310
 311         pxa25x_init_irq();
 312
 313         /* setup ISA IRQs */
 314         for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
 315                 isa_irq = viper_bit_to_irq(level);
 316                 irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
 317                                          handle_edge_irq);
 318                 irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 319         }
 320
 321         irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
 322                                 viper_irq_handler);
 323         irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
 324 }
 325
 326 /* Flat Panel */
 327 static struct pxafb_mode_info fb_mode_info[] = {
 328         {
 329                 .pixclock       = 157500,
 330
 331                 .xres           = 320,
 332                 .yres           = 240,
 333
 334                 .bpp            = 16,
 335
 336                 .hsync_len      = 63,
 337                 .left_margin    = 7,
 338                 .right_margin   = 13,
 339
 340                 .vsync_len      = 20,
 341                 .upper_margin   = 0,
 342                 .lower_margin   = 0,
 343
 344                 .sync           = 0,
 345         },
 346 };
 347
 348 static struct pxafb_mach_info fb_info = {
 349         .modes                  = fb_mode_info,
 350         .num_modes              = 1,
 351         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 352 };
 353
 354 static struct pwm_lookup viper_pwm_lookup[] = {
 355         PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
 356                    PWM_POLARITY_NORMAL),
 357 };
 358
 359 static int viper_backlight_init(struct device *dev)
 360 {
 361         int ret;
 362
 363         /* GPIO9 and 10 control FB backlight. Initialise to off */
 364         ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
 365         if (ret)
 366                 goto err_request_bckl;
 367
 368         ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
 369         if (ret)
 370                 goto err_request_lcd;
 371
 372         ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
 373         if (ret)
 374                 goto err_dir;
 375
 376         ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
 377         if (ret)
 378                 goto err_dir;
 379
 380         return 0;
 381
 382 err_dir:
 383         gpio_free(VIPER_LCD_EN_GPIO);
 384 err_request_lcd:
 385         gpio_free(VIPER_BCKLIGHT_EN_GPIO);
 386 err_request_bckl:
 387         dev_err(dev, "Failed to setup LCD GPIOs\n");
 388
 389         return ret;
 390 }
 391
 392 static int viper_backlight_notify(struct device *dev, int brightness)
 393 {
 394         gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
 395         gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
 396
 397         return brightness;
 398 }
 399
 400 static void viper_backlight_exit(struct device *dev)
 401 {
 402         gpio_free(VIPER_LCD_EN_GPIO);
 403         gpio_free(VIPER_BCKLIGHT_EN_GPIO);
 404 }
 405
 406 static struct platform_pwm_backlight_data viper_backlight_data = {
 407         .max_brightness = 100,
 408         .dft_brightness = 100,
 409         .enable_gpio    = -1,
 410         .init           = viper_backlight_init,
 411         .notify         = viper_backlight_notify,
 412         .exit           = viper_backlight_exit,
 413 };
 414
 415 static struct platform_device viper_backlight_device = {
 416         .name           = "pwm-backlight",
 417         .dev            = {
 418                 .parent         = &pxa25x_device_pwm0.dev,
 419                 .platform_data  = &viper_backlight_data,
 420         },
 421 };
 422
 423 /* Ethernet */
 424 static struct resource smc91x_resources[] = {
 425         [0] = {
 426                 .name   = "smc91x-regs",
 427                 .start  = VIPER_ETH_PHYS + 0x300,
 428                 .end    = VIPER_ETH_PHYS + 0x30f,
 429                 .flags  = IORESOURCE_MEM,
 430         },
 431         [1] = {
 432                 .start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
 433                 .end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
 434                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 435         },
 436         [2] = {
 437                 .name   = "smc91x-data32",
 438                 .start  = VIPER_ETH_DATA_PHYS,
 439                 .end    = VIPER_ETH_DATA_PHYS + 3,
 440                 .flags  = IORESOURCE_MEM,
 441         },
 442 };
 443
 444 static struct smc91x_platdata viper_smc91x_info = {
 445         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 446         .leda   = RPC_LED_100_10,
 447         .ledb   = RPC_LED_TX_RX,
 448 };
 449
 450 static struct platform_device smc91x_device = {
 451         .name           = "smc91x",
 452         .id             = -1,
 453         .num_resources  = ARRAY_SIZE(smc91x_resources),
 454         .resource       = smc91x_resources,
 455         .dev            = {
 456                 .platform_data  = &viper_smc91x_info,
 457         },
 458 };
 459
 460 /* i2c */
 461 static struct i2c_gpio_platform_data i2c_bus_data = {
 462         .sda_pin = VIPER_RTC_I2C_SDA_GPIO,
 463         .scl_pin = VIPER_RTC_I2C_SCL_GPIO,
 464         .udelay  = 10,
 465         .timeout = HZ,
 466 };
 467
 468 static struct platform_device i2c_bus_device = {
 469         .name           = "i2c-gpio",
 470         .id             = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
 471         .dev = {
 472                 .platform_data = &i2c_bus_data,
 473         }
 474 };
 475
 476 static struct i2c_board_info __initdata viper_i2c_devices[] = {
 477         {
 478                 I2C_BOARD_INFO("ds1338", 0x68),
 479         },
 480 };
 481
 482 /*
 483  * Serial configuration:
 484  * You can either have the standard PXA ports driven by the PXA driver,
 485  * or all the ports (PXA + 16850) driven by the 8250 driver.
 486  * Choose your poison.
 487  */
 488
 489 static struct resource viper_serial_resources[] = {
 490 #ifndef CONFIG_SERIAL_PXA
 491         {
 492                 .start  = 0x40100000,
 493                 .end    = 0x4010001f,
 494                 .flags  = IORESOURCE_MEM,
 495         },
 496         {
 497                 .start  = 0x40200000,
 498                 .end    = 0x4020001f,
 499                 .flags  = IORESOURCE_MEM,
 500         },
 501         {
 502                 .start  = 0x40700000,
 503                 .end    = 0x4070001f,
 504                 .flags  = IORESOURCE_MEM,
 505         },
 506         {
 507                 .start  = VIPER_UARTA_PHYS,
 508                 .end    = VIPER_UARTA_PHYS + 0xf,
 509                 .flags  = IORESOURCE_MEM,
 510         },
 511         {
 512                 .start  = VIPER_UARTB_PHYS,
 513                 .end    = VIPER_UARTB_PHYS + 0xf,
 514                 .flags  = IORESOURCE_MEM,
 515         },
 516 #else
 517         {
 518                 0,
 519         },
 520 #endif
 521 };
 522
 523 static struct plat_serial8250_port serial_platform_data[] = {
 524 #ifndef CONFIG_SERIAL_PXA
 525         /* Internal UARTs */
 526         {
 527                 .membase        = (void *)&FFUART,
 528                 .mapbase        = __PREG(FFUART),
 529                 .irq            = IRQ_FFUART,
 530                 .uartclk        = 921600 * 16,
 531                 .regshift       = 2,
 532                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 533                 .iotype         = UPIO_MEM,
 534         },
 535         {
 536                 .membase        = (void *)&BTUART,
 537                 .mapbase        = __PREG(BTUART),
 538                 .irq            = IRQ_BTUART,
 539                 .uartclk        = 921600 * 16,
 540                 .regshift       = 2,
 541                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 542                 .iotype         = UPIO_MEM,
 543         },
 544         {
 545                 .membase        = (void *)&STUART,
 546                 .mapbase        = __PREG(STUART),
 547                 .irq            = IRQ_STUART,
 548                 .uartclk        = 921600 * 16,
 549                 .regshift       = 2,
 550                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 551                 .iotype         = UPIO_MEM,
 552         },
 553         /* External UARTs */
 554         {
 555                 .mapbase        = VIPER_UARTA_PHYS,
 556                 .irq            = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
 557                 .irqflags       = IRQF_TRIGGER_RISING,
 558                 .uartclk        = 1843200,
 559                 .regshift       = 1,
 560                 .iotype         = UPIO_MEM,
 561                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
 562                                   UPF_SKIP_TEST,
 563         },
 564         {
 565                 .mapbase        = VIPER_UARTB_PHYS,
 566                 .irq            = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
 567                 .irqflags       = IRQF_TRIGGER_RISING,
 568                 .uartclk        = 1843200,
 569                 .regshift       = 1,
 570                 .iotype         = UPIO_MEM,
 571                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
 572                                   UPF_SKIP_TEST,
 573         },
 574 #endif
 575         { },
 576 };
 577
 578 static struct platform_device serial_device = {
 579         .name                   = "serial8250",
 580         .id                     = 0,
 581         .dev                    = {
 582                 .platform_data  = serial_platform_data,
 583         },
 584         .num_resources          = ARRAY_SIZE(viper_serial_resources),
 585         .resource               = viper_serial_resources,
 586 };
 587
 588 /* USB */
 589 static void isp116x_delay(struct device *dev, int delay)
 590 {
 591         ndelay(delay);
 592 }
 593
 594 static struct resource isp116x_resources[] = {
 595         [0] = { /* DATA */
 596                 .start  = VIPER_USB_PHYS + 0,
 597                 .end    = VIPER_USB_PHYS + 1,
 598                 .flags  = IORESOURCE_MEM,
 599         },
 600         [1] = { /* ADDR */
 601                 .start  = VIPER_USB_PHYS + 2,
 602                 .end    = VIPER_USB_PHYS + 3,
 603                 .flags  = IORESOURCE_MEM,
 604         },
 605         [2] = {
 606                 .start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
 607                 .end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
 608                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 609         },
 610 };
 611
 612 /* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
 613 static struct isp116x_platform_data isp116x_platform_data = {
 614         /* Enable internal resistors on downstream ports */
 615         .sel15Kres              = 1,
 616         /* On-chip overcurrent protection */
 617         .oc_enable              = 1,
 618         /* INT output polarity */
 619         .int_act_high           = 1,
 620         /* INT edge or level triggered */
 621         .int_edge_triggered     = 0,
 622
 623         /* WAKEUP pin connected - NOT SUPPORTED  */
 624         /* .remote_wakeup_connected = 0, */
 625         /* Wakeup by devices on usb bus enabled */
 626         .remote_wakeup_enable   = 0,
 627         .delay                  = isp116x_delay,
 628 };
 629
 630 static struct platform_device isp116x_device = {
 631         .name                   = "isp116x-hcd",
 632         .id                     = -1,
 633         .num_resources          = ARRAY_SIZE(isp116x_resources),
 634         .resource               = isp116x_resources,
 635         .dev                    = {
 636                 .platform_data  = &isp116x_platform_data,
 637         },
 638
 639 };
 640
 641 /* MTD */
 642 static struct resource mtd_resources[] = {
 643         [0] = { /* RedBoot config + filesystem flash */
 644                 .start  = VIPER_FLASH_PHYS,
 645                 .end    = VIPER_FLASH_PHYS + SZ_32M - 1,
 646                 .flags  = IORESOURCE_MEM,
 647         },
 648         [1] = { /* Boot flash */
 649                 .start  = VIPER_BOOT_PHYS,
 650                 .end    = VIPER_BOOT_PHYS + SZ_1M - 1,
 651                 .flags  = IORESOURCE_MEM,
 652         },
 653         [2] = { /*
 654                  * SRAM size is actually 256KB, 8bits, with a sparse mapping
 655                  * (each byte is on a 16bit boundary).
 656                  */
 657                 .start  = _VIPER_SRAM_BASE,
 658                 .end    = _VIPER_SRAM_BASE + SZ_512K - 1,
 659                 .flags  = IORESOURCE_MEM,
 660         },
 661 };
 662
 663 static struct mtd_partition viper_boot_flash_partition = {
 664         .name           = "RedBoot",
 665         .size           = SZ_1M,
 666         .offset         = 0,
 667         .mask_flags     = MTD_WRITEABLE,        /* force R/O */
 668 };
 669
 670 static struct physmap_flash_data viper_flash_data[] = {
 671         [0] = {
 672                 .width          = 2,
 673                 .parts          = NULL,
 674                 .nr_parts       = 0,
 675         },
 676         [1] = {
 677                 .width          = 2,
 678                 .parts          = &viper_boot_flash_partition,
 679                 .nr_parts       = 1,
 680         },
 681 };
 682
 683 static struct platform_device viper_mtd_devices[] = {
 684         [0] = {
 685                 .name           = "physmap-flash",
 686                 .id             = 0,
 687                 .dev            = {
 688                         .platform_data  = &viper_flash_data[0],
 689                 },
 690                 .resource       = &mtd_resources[0],
 691                 .num_resources  = 1,
 692         },
 693         [1] = {
 694                 .name           = "physmap-flash",
 695                 .id             = 1,
 696                 .dev            = {
 697                         .platform_data  = &viper_flash_data[1],
 698                 },
 699                 .resource       = &mtd_resources[1],
 700                 .num_resources  = 1,
 701         },
 702 };
 703
 704 static struct platform_device *viper_devs[] __initdata = {
 705         &smc91x_device,
 706         &i2c_bus_device,
 707         &serial_device,
 708         &isp116x_device,
 709         &viper_mtd_devices[0],
 710         &viper_mtd_devices[1],
 711         &viper_backlight_device,
 712         &viper_pcmcia_device,
 713 };
 714
 715 static mfp_cfg_t viper_pin_config[] __initdata = {
 716         /* Chip selects */
 717         GPIO15_nCS_1,
 718         GPIO78_nCS_2,
 719         GPIO79_nCS_3,
 720         GPIO80_nCS_4,
 721         GPIO33_nCS_5,
 722
 723         /* AC97 */
 724         GPIO28_AC97_BITCLK,
 725         GPIO29_AC97_SDATA_IN_0,
 726         GPIO30_AC97_SDATA_OUT,
 727         GPIO31_AC97_SYNC,
 728
 729         /* FP Backlight */
 730         GPIO9_GPIO,                             /* VIPER_BCKLIGHT_EN_GPIO */
 731         GPIO10_GPIO,                            /* VIPER_LCD_EN_GPIO */
 732         GPIO16_PWM0_OUT,
 733
 734         /* Ethernet PHY Ready */
 735         GPIO18_RDY,
 736
 737         /* Serial shutdown */
 738         GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,       /* VIPER_UART_SHDN_GPIO */
 739
 740         /* Compact-Flash / PC104 */
 741         GPIO48_nPOE,
 742         GPIO49_nPWE,
 743         GPIO50_nPIOR,
 744         GPIO51_nPIOW,
 745         GPIO52_nPCE_1,
 746         GPIO53_nPCE_2,
 747         GPIO54_nPSKTSEL,
 748         GPIO55_nPREG,
 749         GPIO56_nPWAIT,
 750         GPIO57_nIOIS16,
 751         GPIO8_GPIO,                             /* VIPER_CF_RDY_GPIO */
 752         GPIO32_GPIO,                            /* VIPER_CF_CD_GPIO */
 753         GPIO82_GPIO,                            /* VIPER_CF_POWER_GPIO */
 754
 755         /* Integrated UPS control */
 756         GPIO20_GPIO,                            /* VIPER_UPS_GPIO */
 757
 758         /* Vcc regulator control */
 759         GPIO6_GPIO,                             /* VIPER_PSU_DATA_GPIO */
 760         GPIO11_GPIO,                            /* VIPER_PSU_CLK_GPIO */
 761         GPIO19_GPIO,                            /* VIPER_PSU_nCS_LD_GPIO */
 762
 763         /* i2c busses */
 764         GPIO26_GPIO,                            /* VIPER_TPM_I2C_SDA_GPIO */
 765         GPIO27_GPIO,                            /* VIPER_TPM_I2C_SCL_GPIO */
 766         GPIO83_GPIO,                            /* VIPER_RTC_I2C_SDA_GPIO */
 767         GPIO84_GPIO,                            /* VIPER_RTC_I2C_SCL_GPIO */
 768
 769         /* PC/104 Interrupt */
 770         GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,       /* VIPER_CPLD_GPIO */
 771 };
 772
 773 static unsigned long viper_tpm;
 774
 775 static int __init viper_tpm_setup(char *str)
 776 {
 777         return kstrtoul(str, 10, &viper_tpm) >= 0;
 778 }
 779
 780 __setup("tpm=", viper_tpm_setup);
 781
 782 static void __init viper_tpm_init(void)
 783 {
 784         struct platform_device *tpm_device;
 785         struct i2c_gpio_platform_data i2c_tpm_data = {
 786                 .sda_pin = VIPER_TPM_I2C_SDA_GPIO,
 787                 .scl_pin = VIPER_TPM_I2C_SCL_GPIO,
 788                 .udelay  = 10,
 789                 .timeout = HZ,
 790         };
 791         char *errstr;
 792
 793         /* Allocate TPM i2c bus if requested */
 794         if (!viper_tpm)
 795                 return;
 796
 797         tpm_device = platform_device_alloc("i2c-gpio", 2);
 798         if (tpm_device) {
 799                 if (!platform_device_add_data(tpm_device,
 800                                               &i2c_tpm_data,
 801                                               sizeof(i2c_tpm_data))) {
 802                         if (platform_device_add(tpm_device)) {
 803                                 errstr = "register TPM i2c bus";
 804                                 goto error_free_tpm;
 805                         }
 806                 } else {
 807                         errstr = "allocate TPM i2c bus data";
 808                         goto error_free_tpm;
 809                 }
 810         } else {
 811                 errstr = "allocate TPM i2c device";
 812                 goto error_tpm;
 813         }
 814
 815         return;
 816
 817 error_free_tpm:
 818         kfree(tpm_device);
 819 error_tpm:
 820         pr_err("viper: Couldn't %s, giving up\n", errstr);
 821 }
 822
 823 static void __init viper_init_vcore_gpios(void)
 824 {
 825         if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
 826                 goto err_request_data;
 827
 828         if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
 829                 goto err_request_clk;
 830
 831         if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
 832                 goto err_request_cs;
 833
 834         if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
 835             gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
 836             gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
 837                 goto err_dir;
 838
 839         /* c/should assume redboot set the correct level ??? */
 840         viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
 841
 842         return;
 843
 844 err_dir:
 845         gpio_free(VIPER_PSU_nCS_LD_GPIO);
 846 err_request_cs:
 847         gpio_free(VIPER_PSU_CLK_GPIO);
 848 err_request_clk:
 849         gpio_free(VIPER_PSU_DATA_GPIO);
 850 err_request_data:
 851         pr_err("viper: Failed to setup vcore control GPIOs\n");
 852 }
 853
 854 static void __init viper_init_serial_gpio(void)
 855 {
 856         if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
 857                 goto err_request;
 858
 859         if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
 860                 goto err_dir;
 861
 862         return;
 863
 864 err_dir:
 865         gpio_free(VIPER_UART_SHDN_GPIO);
 866 err_request:
 867         pr_err("viper: Failed to setup UART shutdown GPIO\n");
 868 }
 869
 870 #ifdef CONFIG_CPU_FREQ
 871 static int viper_cpufreq_notifier(struct notifier_block *nb,
 872                                   unsigned long val, void *data)
 873 {
 874         struct cpufreq_freqs *freq = data;
 875
 876         /* TODO: Adjust timings??? */
 877
 878         switch (val) {
 879         case CPUFREQ_PRECHANGE:
 880                 if (freq->old < freq->new) {
 881                         /* we are getting faster so raise the voltage
 882                          * before we change freq */
 883                         viper_set_core_cpu_voltage(freq->new, 0);
 884                 }
 885                 break;
 886         case CPUFREQ_POSTCHANGE:
 887                 if (freq->old > freq->new) {
 888                         /* we are slowing down so drop the power
 889                          * after we change freq */
 890                         viper_set_core_cpu_voltage(freq->new, 0);
 891                 }
 892                 break;
 893         default:
 894                 /* ignore */
 895                 break;
 896         }
 897
 898         return 0;
 899 }
 900
 901 static struct notifier_block viper_cpufreq_notifier_block = {
 902         .notifier_call  = viper_cpufreq_notifier
 903 };
 904
 905 static void __init viper_init_cpufreq(void)
 906 {
 907         if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
 908                                       CPUFREQ_TRANSITION_NOTIFIER))
 909                 pr_err("viper: Failed to setup cpufreq notifier\n");
 910 }
 911 #else
 912 static inline void viper_init_cpufreq(void) {}
 913 #endif
 914
 915 static void viper_power_off(void)
 916 {
 917         pr_notice("Shutting off UPS\n");
 918         gpio_set_value(VIPER_UPS_GPIO, 1);
 919         /* Spin to death... */
 920         while (1);
 921 }
 922
 923 static void __init viper_init(void)
 924 {
 925         u8 version;
 926
 927         pm_power_off = viper_power_off;
 928
 929         pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 930
 931         pxa_set_ffuart_info(NULL);
 932         pxa_set_btuart_info(NULL);
 933         pxa_set_stuart_info(NULL);
 934
 935         /* Wake-up serial console */
 936         viper_init_serial_gpio();
 937
 938         pxa_set_fb_info(NULL, &fb_info);
 939
 940         /* v1 hardware cannot use the datacs line */
 941         version = viper_hw_version();
 942         if (version == 0)
 943                 smc91x_device.num_resources--;
 944
 945         pxa_set_i2c_info(NULL);
 946         pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
 947         platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
 948
 949         viper_init_vcore_gpios();
 950         viper_init_cpufreq();
 951
 952         register_syscore_ops(&viper_cpu_syscore_ops);
 953
 954         if (version) {
 955                 pr_info("viper: hardware v%di%d detected. "
 956                         "CPLD revision %d.\n",
 957                         VIPER_BOARD_VERSION(version),
 958                         VIPER_BOARD_ISSUE(version),
 959                         VIPER_CPLD_REVISION(version));
 960                 system_rev = (VIPER_BOARD_VERSION(version) << 8) |
 961                              (VIPER_BOARD_ISSUE(version) << 4) |
 962                              VIPER_CPLD_REVISION(version);
 963         } else {
 964                 pr_info("viper: No version register.\n");
 965         }
 966
 967         i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
 968
 969         viper_tpm_init();
 970         pxa_set_ac97_info(NULL);
 971 }
 972
 973 static struct map_desc viper_io_desc[] __initdata = {
 974         {
 975                 .virtual = VIPER_CPLD_BASE,
 976                 .pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
 977                 .length  = 0x00300000,
 978                 .type    = MT_DEVICE,
 979         },
 980         {
 981                 .virtual = VIPER_PC104IO_BASE,
 982                 .pfn     = __phys_to_pfn(0x30000000),
 983                 .length  = 0x00800000,
 984                 .type    = MT_DEVICE,
 985         },
 986 };
 987
 988 static void __init viper_map_io(void)
 989 {
 990         pxa25x_map_io();
 991
 992         iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
 993
 994         PCFR |= PCFR_OPDE;
 995 }
 996
 997 MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 998         /* Maintainer: Marc Zyngier <maz@misterjones.org> */
 999         .atag_offset    = 0x100,
1000         .map_io         = viper_map_io,
1001         .nr_irqs        = PXA_NR_IRQS,
1002         .init_irq       = viper_init_irq,
1003         .handle_irq     = pxa25x_handle_irq,
1004         .init_time      = pxa_timer_init,
1005         .init_machine   = viper_init,
1006         .restart        = pxa_restart,
1007 MACHINE_END