]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/powerpc/boot/dts/fsl/p1022ds.dtsi
Merge remote-tracking branch 'xfs/for-next'
[karo-tx-linux.git] / arch / powerpc / boot / dts / fsl / p1022ds.dtsi
1 /*
2  * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
3  *
4  * Copyright 2012 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
34
35 &board_lbc {
36         nor@0,0 {
37                 #address-cells = <1>;
38                 #size-cells = <1>;
39                 compatible = "cfi-flash";
40                 reg = <0x0 0x0 0x8000000>;
41                 bank-width = <2>;
42                 device-width = <1>;
43
44                 partition@0 {
45                         reg = <0x0 0x03000000>;
46                         label = "ramdisk-nor";
47                         read-only;
48                 };
49
50                 partition@3000000 {
51                         reg = <0x03000000 0x00e00000>;
52                         label = "diagnostic-nor";
53                         read-only;
54                 };
55
56                 partition@3e00000 {
57                         reg = <0x03e00000 0x00200000>;
58                         label = "dink-nor";
59                         read-only;
60                 };
61
62                 partition@4000000 {
63                         reg = <0x04000000 0x00400000>;
64                         label = "kernel-nor";
65                         read-only;
66                 };
67
68                 partition@4400000 {
69                         reg = <0x04400000 0x03b00000>;
70                         label = "jffs2-nor";
71                 };
72
73                 partition@7f00000 {
74                         reg = <0x07f00000 0x00080000>;
75                         label = "dtb-nor";
76                         read-only;
77                 };
78
79                 partition@7f80000 {
80                         reg = <0x07f80000 0x00080000>;
81                         label = "u-boot-nor";
82                         read-only;
83                 };
84         };
85
86         nand@2,0 {
87                 #address-cells = <1>;
88                 #size-cells = <1>;
89                 compatible = "fsl,elbc-fcm-nand";
90                 reg = <0x2 0x0 0x40000>;
91
92                 partition@0 {
93                         reg = <0x0 0x02000000>;
94                         label = "u-boot-nand";
95                         read-only;
96                 };
97
98                 partition@2000000 {
99                         reg = <0x02000000 0x10000000>;
100                         label = "jffs2-nand";
101                 };
102
103                 partition@12000000 {
104                         reg = <0x12000000 0x10000000>;
105                         label = "ramdisk-nand";
106                         read-only;
107                 };
108
109                 partition@22000000 {
110                         reg = <0x22000000 0x04000000>;
111                         label = "kernel-nand";
112                 };
113
114                 partition@26000000 {
115                         reg = <0x26000000 0x01000000>;
116                         label = "dtb-nand";
117                         read-only;
118                 };
119
120                 partition@27000000 {
121                         reg = <0x27000000 0x19000000>;
122                         label = "reserved-nand";
123                 };
124         };
125
126         board-control@3,0 {
127                 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
128                 reg = <3 0 0x30>;
129                 interrupt-parent = <&mpic>;
130                 /*
131                  * IRQ8 is generated if the "EVENT" switch is pressed
132                  * and PX_CTL[EVESEL] is set to 00.
133                  */
134                 interrupts = <8 0 0 0>;
135         };
136 };
137
138 &board_soc {
139         i2c@3100 {
140                 wm8776:codec@1a {
141                         compatible = "wlf,wm8776";
142                         reg = <0x1a>;
143                         /*
144                          * clock-frequency will be set by U-Boot if
145                          * the clock is enabled.
146                          */
147                 };
148                 rtc@68 {
149                         compatible = "dallas,ds3232";
150                         reg = <0x68>;
151                         interrupts = <0x1 0x1 0 0>;
152                 };
153                 adt7461@4c {
154                         compatible = "adi,adt7461";
155                         reg = <0x4c>;
156                 };
157         };
158
159         spi@7000 {
160                 flash@0 {
161                         #address-cells = <1>;
162                         #size-cells = <1>;
163                         compatible = "spansion,s25sl12801";
164                         reg = <0>;
165                         spi-max-frequency = <40000000>; /* input clock */
166
167                         partition@0 {
168                                 label = "u-boot-spi";
169                                 reg = <0x00000000 0x00100000>;
170                                 read-only;
171                         };
172                         partition@100000 {
173                                 label = "kernel-spi";
174                                 reg = <0x00100000 0x00500000>;
175                                 read-only;
176                         };
177                         partition@600000 {
178                                 label = "dtb-spi";
179                                 reg = <0x00600000 0x00100000>;
180                                 read-only;
181                         };
182                         partition@700000 {
183                                 label = "file system-spi";
184                                 reg = <0x00700000 0x00900000>;
185                         };
186                 };
187         };
188
189         ssi@15000 {
190                 fsl,mode = "i2s-slave";
191                 codec-handle = <&wm8776>;
192                 fsl,ssi-asynchronous;
193         };
194
195         usb@22000 {
196                 phy_type = "ulpi";
197         };
198
199         usb@23000 {
200                 status = "disabled";
201         };
202
203         mdio@24000 {
204                 phy0: ethernet-phy@0 {
205                         interrupts = <3 1 0 0>;
206                         reg = <0x1>;
207                 };
208                 phy1: ethernet-phy@1 {
209                         interrupts = <9 1 0 0>;
210                         reg = <0x2>;
211                 };
212                 tbi-phy@2 {
213                         device_type = "tbi-phy";
214                         reg = <0x2>;
215                 };
216         };
217
218         ptp_clock@b0e00 {
219                 compatible = "fsl,etsec-ptp";
220                 reg = <0xb0e00 0xb0>;
221                 interrupts = <68 2 0 0 69 2 0 0>;
222                 fsl,tclk-period = <5>;
223                 fsl,tmr-prsc    = <2>;
224                 fsl,tmr-add     = <0xc01ebd3d>;
225                 fsl,tmr-fiper1  = <999999995>;
226                 fsl,tmr-fiper2  = <99990>;
227                 fsl,max-adj     = <266499999>;
228         };
229
230         ethernet@b0000 {
231                 phy-handle = <&phy0>;
232                 phy-connection-type = "rgmii-id";
233         };
234
235         ethernet@b1000 {
236                 phy-handle = <&phy1>;
237                 phy-connection-type = "rgmii-id";
238         };
239 };