arch/powerpc/boot/dts/fsl/t1023si-post.dtsi

   1 /*
   2  * T1023 Silicon/SoC Device Tree Source (post include)
   3  *
   4  * Copyright 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 &ifc {
  36         #address-cells = <2>;
  37         #size-cells = <1>;
  38         compatible = "fsl,ifc", "simple-bus";
  39         interrupts = <25 2 0 0>;
  40 };
  41
  42 &pci0 {
  43         compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
  44         device_type = "pci";
  45         #size-cells = <2>;
  46         #address-cells = <3>;
  47         bus-range = <0x0 0xff>;
  48         interrupts = <20 2 0 0>;
  49         fsl,iommu-parent = <&pamu0>;
  50         pcie@0 {
  51                 reg = <0 0 0 0 0>;
  52                 #interrupt-cells = <1>;
  53                 #size-cells = <2>;
  54                 #address-cells = <3>;
  55                 device_type = "pci";
  56                 interrupts = <20 2 0 0>;
  57                 interrupt-map-mask = <0xf800 0 0 7>;
  58                 interrupt-map = <
  59                         /* IDSEL 0x0 */
  60                         0000 0 0 1 &mpic 40 1 0 0
  61                         0000 0 0 2 &mpic 1 1 0 0
  62                         0000 0 0 3 &mpic 2 1 0 0
  63                         0000 0 0 4 &mpic 3 1 0 0
  64                         >;
  65         };
  66 };
  67
  68 &pci1 {
  69         compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
  70         device_type = "pci";
  71         #size-cells = <2>;
  72         #address-cells = <3>;
  73         bus-range = <0 0xff>;
  74         interrupts = <21 2 0 0>;
  75         fsl,iommu-parent = <&pamu0>;
  76         pcie@0 {
  77                 reg = <0 0 0 0 0>;
  78                 #interrupt-cells = <1>;
  79                 #size-cells = <2>;
  80                 #address-cells = <3>;
  81                 device_type = "pci";
  82                 interrupts = <21 2 0 0>;
  83                 interrupt-map-mask = <0xf800 0 0 7>;
  84                 interrupt-map = <
  85                         /* IDSEL 0x0 */
  86                         0000 0 0 1 &mpic 41 1 0 0
  87                         0000 0 0 2 &mpic 5 1 0 0
  88                         0000 0 0 3 &mpic 6 1 0 0
  89                         0000 0 0 4 &mpic 7 1 0 0
  90                         >;
  91         };
  92 };
  93
  94 &pci2 {
  95         compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
  96         device_type = "pci";
  97         #size-cells = <2>;
  98         #address-cells = <3>;
  99         bus-range = <0x0 0xff>;
 100         interrupts = <22 2 0 0>;
 101         fsl,iommu-parent = <&pamu0>;
 102         pcie@0 {
 103                 reg = <0 0 0 0 0>;
 104                 #interrupt-cells = <1>;
 105                 #size-cells = <2>;
 106                 #address-cells = <3>;
 107                 device_type = "pci";
 108                 interrupts = <22 2 0 0>;
 109                 interrupt-map-mask = <0xf800 0 0 7>;
 110                 interrupt-map = <
 111                         /* IDSEL 0x0 */
 112                         0000 0 0 1 &mpic 42 1 0 0
 113                         0000 0 0 2 &mpic 9 1 0 0
 114                         0000 0 0 3 &mpic 10 1 0 0
 115                         0000 0 0 4 &mpic 11 1 0 0
 116                         >;
 117         };
 118 };
 119
 120 &dcsr {
 121         #address-cells = <1>;
 122         #size-cells = <1>;
 123         compatible = "fsl,dcsr", "simple-bus";
 124
 125         dcsr-epu@0 {
 126                 compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
 127                 interrupts = <52 2 0 0
 128                               84 2 0 0
 129                               85 2 0 0>;
 130                 reg = <0x0 0x1000>;
 131         };
 132         dcsr-npc {
 133                 compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
 134                 reg = <0x1000 0x1000 0x1002000 0x10000>;
 135         };
 136         dcsr-nxc@2000 {
 137                 compatible = "fsl,dcsr-nxc";
 138                 reg = <0x2000 0x1000>;
 139         };
 140         dcsr-corenet {
 141                 compatible = "fsl,dcsr-corenet";
 142                 reg = <0x8000 0x1000 0x1A000 0x1000>;
 143         };
 144         dcsr-ocn@11000 {
 145                 compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
 146                 reg = <0x11000 0x1000>;
 147         };
 148         dcsr-ddr@12000 {
 149                 compatible = "fsl,dcsr-ddr";
 150                 dev-handle = <&ddr1>;
 151                 reg = <0x12000 0x1000>;
 152         };
 153         dcsr-nal@18000 {
 154                 compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
 155                 reg = <0x18000 0x1000>;
 156         };
 157         dcsr-rcpm@22000 {
 158                 compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
 159                 reg = <0x22000 0x1000>;
 160         };
 161         dcsr-snpc@30000 {
 162                 compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
 163                 reg = <0x30000 0x1000 0x1022000 0x10000>;
 164         };
 165         dcsr-snpc@31000 {
 166                 compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
 167                 reg = <0x31000 0x1000 0x1042000 0x10000>;
 168         };
 169         dcsr-cpu-sb-proxy@100000 {
 170                 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 171                 cpu-handle = <&cpu0>;
 172                 reg = <0x100000 0x1000 0x101000 0x1000>;
 173         };
 174         dcsr-cpu-sb-proxy@108000 {
 175                 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 176                 cpu-handle = <&cpu1>;
 177                 reg = <0x108000 0x1000 0x109000 0x1000>;
 178         };
 179 };
 180
 181 &soc {
 182         #address-cells = <1>;
 183         #size-cells = <1>;
 184         device_type = "soc";
 185         compatible = "simple-bus";
 186
 187         soc-sram-error {
 188                 compatible = "fsl,soc-sram-error";
 189                 interrupts = <16 2 1 29>;
 190         };
 191
 192         corenet-law@0 {
 193                 compatible = "fsl,corenet-law";
 194                 reg = <0x0 0x1000>;
 195                 fsl,num-laws = <16>;
 196         };
 197
 198         ddr1: memory-controller@8000 {
 199                 compatible = "fsl,qoriq-memory-controller-v5.0",
 200                                 "fsl,qoriq-memory-controller";
 201                 reg = <0x8000 0x1000>;
 202                 interrupts = <16 2 1 23>;
 203         };
 204
 205         cpc: l3-cache-controller@10000 {
 206                 compatible = "fsl,t1023-l3-cache-controller", "cache";
 207                 reg = <0x10000 0x1000>;
 208                 interrupts = <16 2 1 27>;
 209         };
 210
 211         corenet-cf@18000 {
 212                 compatible = "fsl,corenet2-cf";
 213                 reg = <0x18000 0x1000>;
 214                 interrupts = <16 2 1 31>;
 215         };
 216
 217         iommu@20000 {
 218                 compatible = "fsl,pamu-v1.0", "fsl,pamu";
 219                 reg = <0x20000 0x1000>;
 220                 ranges = <0 0x20000 0x1000>;
 221                 #address-cells = <1>;
 222                 #size-cells = <1>;
 223                 interrupts = <
 224                         24 2 0 0
 225                         16 2 1 30>;
 226                 pamu0: pamu@0 {
 227                         reg = <0 0x1000>;
 228                         fsl,primary-cache-geometry = <128 1>;
 229                         fsl,secondary-cache-geometry = <32 2>;
 230                 };
 231         };
 232
 233 /include/ "qoriq-mpic.dtsi"
 234
 235         guts: global-utilities@e0000 {
 236                 compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
 237                 reg = <0xe0000 0xe00>;
 238                 fsl,has-rstcr;
 239                 fsl,liodn-bits = <12>;
 240         };
 241
 242 /include/ "qoriq-clockgen2.dtsi"
 243         global-utilities@e1000 {
 244                 compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
 245                 mux0: mux0@0 {
 246                         #clock-cells = <0>;
 247                         reg = <0x0 4>;
 248                         compatible = "fsl,core-mux-clock";
 249                         clocks = <&pll0 0>, <&pll0 1>;
 250                         clock-names = "pll0_0", "pll0_1";
 251                         clock-output-names = "cmux0";
 252                 };
 253                 mux1: mux1@20 {
 254                         #clock-cells = <0>;
 255                         reg = <0x20 4>;
 256                         compatible = "fsl,core-mux-clock";
 257                         clocks = <&pll0 0>, <&pll0 1>;
 258                         clock-names = "pll0_0", "pll0_1";
 259                         clock-output-names = "cmux1";
 260                 };
 261         };
 262
 263         rcpm: global-utilities@e2000 {
 264                 compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.0";
 265                 reg = <0xe2000 0x1000>;
 266         };
 267
 268         sfp: sfp@e8000 {
 269                 compatible = "fsl,t1023-sfp";
 270                 reg = <0xe8000 0x1000>;
 271         };
 272
 273         serdes: serdes@ea000 {
 274                 compatible = "fsl,t1023-serdes";
 275                 reg = <0xea000 0x4000>;
 276         };
 277
 278         scfg: global-utilities@fc000 {
 279                 compatible = "fsl,t1023-scfg";
 280                 reg = <0xfc000 0x1000>;
 281         };
 282
 283 /include/ "elo3-dma-0.dtsi"
 284 /include/ "elo3-dma-1.dtsi"
 285
 286 /include/ "qoriq-espi-0.dtsi"
 287         spi@110000 {
 288                 fsl,espi-num-chipselects = <4>;
 289         };
 290
 291 /include/ "qoriq-esdhc-0.dtsi"
 292         sdhc@114000 {
 293                 compatible = "fsl,t1023-esdhc", "fsl,esdhc";
 294                 fsl,iommu-parent = <&pamu0>;
 295                 fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
 296                 sdhci,auto-cmd12;
 297                 no-1-8-v;
 298         };
 299 /include/ "qoriq-i2c-0.dtsi"
 300 /include/ "qoriq-i2c-1.dtsi"
 301 /include/ "qoriq-duart-0.dtsi"
 302 /include/ "qoriq-duart-1.dtsi"
 303 /include/ "qoriq-gpio-0.dtsi"
 304 /include/ "qoriq-gpio-1.dtsi"
 305 /include/ "qoriq-gpio-2.dtsi"
 306 /include/ "qoriq-gpio-3.dtsi"
 307 /include/ "qoriq-usb2-mph-0.dtsi"
 308         usb0: usb@210000 {
 309                 compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
 310                 fsl,iommu-parent = <&pamu0>;
 311                 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
 312                 phy_type = "utmi";
 313                 port0;
 314         };
 315 /include/ "qoriq-usb2-dr-0.dtsi"
 316         usb1: usb@211000 {
 317                 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 318                 fsl,iommu-parent = <&pamu0>;
 319                 fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
 320                 dr_mode = "host";
 321                 phy_type = "utmi";
 322         };
 323 /include/ "qoriq-sata2-0.dtsi"
 324         sata@220000 {
 325                 fsl,iommu-parent = <&pamu0>;
 326                 fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
 327         };
 328
 329 /include/ "qoriq-sec5.0-0.dtsi"
 330
 331 /include/ "qoriq-fman3l-0.dtsi"
 332 /include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
 333 /include/ "qoriq-fman3-0-1g-1.dtsi"
 334 /include/ "qoriq-fman3-0-1g-2.dtsi"
 335 /include/ "qoriq-fman3-0-1g-3.dtsi"
 336         fman@400000 {
 337                 enet0: ethernet@e0000 {
 338                 };
 339
 340                 enet1: ethernet@e2000 {
 341                 };
 342
 343                 enet2: ethernet@e4000 {
 344                 };
 345
 346                 enet3: ethernet@e6000 {
 347                 };
 348         };
 349 };