]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/ppc/platforms/ev64260.c
Merge iSeries include file move
[karo-tx-linux.git] / arch / ppc / platforms / ev64260.c
1 /*
2  * arch/ppc/platforms/ev64260.c
3  *
4  * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
5  *
6  * Author: Mark A. Greer <mgreer@mvista.com>
7  *
8  * 2001-2003 (c) MontaVista, Software, Inc.  This file is licensed under
9  * the terms of the GNU General Public License version 2.  This program
10  * is licensed "as is" without any warranty of any kind, whether express
11  * or implied.
12  */
13
14 /*
15  * The EV-64260-BP port is the result of hard work from many people from
16  * many companies.  In particular, employees of Marvell/Galileo, Mission
17  * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
18  *
19  * Note: I have not been able to get *all* PCI slots to work reliably
20  *      at 66 MHz.  I recommend setting jumpers J15 & J16 to short pins 1&2
21  *      so that 33 MHz is used. --MAG
22  * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
23  *      At 100MHz, they are solid.
24  */
25 #include <linux/config.h>
26
27 #include <linux/delay.h>
28 #include <linux/pci.h>
29 #include <linux/ide.h>
30 #include <linux/irq.h>
31 #include <linux/fs.h>
32 #include <linux/seq_file.h>
33 #include <linux/console.h>
34 #include <linux/initrd.h>
35 #include <linux/root_dev.h>
36 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
37 #include <linux/serial.h>
38 #include <linux/tty.h>
39 #include <linux/serial_core.h>
40 #else
41 #include <linux/mv643xx.h>
42 #endif
43 #include <asm/bootinfo.h>
44 #include <asm/machdep.h>
45 #include <asm/mv64x60.h>
46 #include <asm/todc.h>
47 #include <asm/time.h>
48
49 #include <platforms/ev64260.h>
50
51 #define BOARD_VENDOR    "Marvell/Galileo"
52 #define BOARD_MACHINE   "EV-64260-BP"
53
54 static struct mv64x60_handle    bh;
55
56 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
57 extern void gen550_progress(char *, unsigned short);
58 extern void gen550_init(int, struct uart_port *);
59 #endif
60
61 static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
62         18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
63 };
64 static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
65         { 1, 15, 14,  2,  4, 13,  5,  9,  6, 11,  8, 10, 16, 12,  7,  0 },
66         { 0, 30,  0,  2,  0, 26,  0, 18,  0, 22, 20, 24, 28, 32,  0,  0 }
67 };
68
69
70 TODC_ALLOC();
71
72 static int
73 ev64260_get_bus_speed(void)
74 {
75         return 100000000;
76 }
77
78 static int
79 ev64260_get_cpu_speed(void)
80 {
81         unsigned long   pvr, hid1, pll_ext;
82
83         pvr = PVR_VER(mfspr(SPRN_PVR));
84
85         if (pvr != PVR_VER(PVR_7450)) {
86                 hid1 = mfspr(SPRN_HID1) >> 28;
87                 return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
88         }
89         else {
90                 hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
91                 pll_ext = 0; /* No way to read; must get from schematic */
92                 return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
93         }
94 }
95
96 unsigned long __init
97 ev64260_find_end_of_memory(void)
98 {
99         return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
100                 MV64x60_TYPE_GT64260A);
101 }
102
103 /*
104  * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
105  * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
106  *      PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
107  *      This is the most IRQs you can get from one bus with this board, though.
108  */
109 static int __init
110 ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
111 {
112         struct pci_controller   *hose = pci_bus_to_hose(dev->bus->number);
113
114         if (hose->index == 0) {
115                 static char pci_irq_table[][4] =
116                 /*
117                  *      PCI IDSEL/INTPIN->INTLINE
118                  *         A   B   C   D
119                  */
120                 {
121                         {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
122                         {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
123                 };
124
125                 const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
126                 return PCI_IRQ_TABLE_LOOKUP;
127         }
128         else {
129                 static char pci_irq_table[][4] =
130                 /*
131                  *      PCI IDSEL/INTPIN->INTLINE
132                  *         A   B   C   D
133                  */
134                 {
135                         { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
136                         { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
137                 };
138
139                 const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
140                 return PCI_IRQ_TABLE_LOOKUP;
141         }
142 }
143
144 static void __init
145 ev64260_setup_peripherals(void)
146 {
147         mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
148                 EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
149         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
150         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
151                 EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
152         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
153         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
154                 EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
155         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
156         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
157                 EV64260_UART_BASE, EV64260_UART_SIZE, 0);
158         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
159         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
160                 EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
161         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
162
163         TODC_INIT(TODC_TYPE_DS1501, 0, 0,
164                         ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
165
166         mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
167         mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
168
169         if (ev64260_get_bus_speed() > 100000000)
170                 mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
171
172         mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
173         mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
174
175         /*
176          * Enabling of PCI internal-vs-external arbitration
177          * is a platform- and errata-dependent decision.
178          */
179         if (bh.type == MV64x60_TYPE_GT64260A )  {
180                 mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
181                 mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
182         }
183
184         mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
185
186         /*
187          * Turn off timer/counters.  Not turning off watchdog timer because
188          * can't read its reg on the 64260A so don't know if we'll be enabling
189          * or disabling.
190          */
191         mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
192                         ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
193         mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
194                         ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
195
196         /*
197          * Set MPSC Multiplex RMII
198          * NOTE: ethernet driver modifies bit 0 and 1
199          */
200         mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
201
202         /*
203          * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
204          * bridge as interrupt inputs (via the General Purpose Ports (GPP)
205          * register).  Need to route the MPP inputs to the GPP and set the
206          * polarity correctly.
207          *
208          * In MPP Control 2 Register
209          *   MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
210          *   MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
211          */
212         mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
213
214         /*
215          * In MPP Control 3 Register
216          *   MPP 26 -> GPP 26 (RTC INT)         bits  8-11 -> 0
217          *   MPP 27 -> GPP 27 (PCI 0 INTA)      bits 12-15 -> 0
218          *   MPP 29 -> GPP 29 (PCI 1 INTA)      bits 20-23 -> 0
219          */
220         mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
221
222 #define GPP_EXTERNAL_INTERRUPTS \
223                 ((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
224         /* DUART & PCI interrupts are inputs */
225         mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
226         /* DUART & PCI interrupts are active low */
227         mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
228
229         /* Clear any pending interrupts for these inputs and enable them. */
230         mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
231         mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
232
233         return;
234 }
235
236 static void __init
237 ev64260_setup_bridge(void)
238 {
239         struct mv64x60_setup_info       si;
240         int                             i;
241
242         memset(&si, 0, sizeof(si));
243
244         si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
245
246         si.pci_0.enable_bus = 1;
247         si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
248         si.pci_0.pci_io.pci_base_hi = 0;
249         si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
250         si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
251         si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
252         si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
253         si.pci_0.pci_mem[0].pci_base_hi = 0;
254         si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
255         si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
256         si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
257         si.pci_0.pci_cmd_bits = 0;
258         si.pci_0.latency_timer = 0x8;
259
260         si.pci_1.enable_bus = 1;
261         si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
262         si.pci_1.pci_io.pci_base_hi = 0;
263         si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
264         si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
265         si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
266         si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
267         si.pci_1.pci_mem[0].pci_base_hi = 0;
268         si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
269         si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
270         si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
271         si.pci_1.pci_cmd_bits = 0;
272         si.pci_1.latency_timer = 0x8;
273
274         for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
275                 si.cpu_prot_options[i] = 0;
276                 si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
277                 si.pci_0.acc_cntl_options[i] =
278                         GT64260_PCI_ACC_CNTL_DREADEN |
279                         GT64260_PCI_ACC_CNTL_RDPREFETCH |
280                         GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
281                         GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
282                         GT64260_PCI_ACC_CNTL_SWAP_NONE |
283                         GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
284                 si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
285                 si.pci_1.acc_cntl_options[i] =
286                         GT64260_PCI_ACC_CNTL_DREADEN |
287                         GT64260_PCI_ACC_CNTL_RDPREFETCH |
288                         GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
289                         GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
290                         GT64260_PCI_ACC_CNTL_SWAP_NONE |
291                         GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
292                 si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
293         }
294
295         /* Lookup PCI host bridges */
296         if (mv64x60_init(&bh, &si))
297                 printk(KERN_ERR "Bridge initialization failed.\n");
298
299         pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
300         ppc_md.pci_swizzle = common_swizzle;
301         ppc_md.pci_map_irq = ev64260_map_irq;
302         ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
303
304         mv64x60_set_bus(&bh, 0, 0);
305         bh.hose_a->first_busno = 0;
306         bh.hose_a->last_busno = 0xff;
307         bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
308
309         bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
310         mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
311         bh.hose_b->last_busno = 0xff;
312         bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
313                 bh.hose_b->first_busno);
314
315         return;
316 }
317
318 #if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
319 static void __init
320 ev64260_early_serial_map(void)
321 {
322         struct uart_port        port;
323         static char             first_time = 1;
324
325         if (first_time) {
326                 memset(&port, 0, sizeof(port));
327
328                 port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
329                 port.irq = EV64260_UART_0_IRQ;
330                 port.uartclk = BASE_BAUD * 16;
331                 port.regshift = 2;
332                 port.iotype = SERIAL_IO_MEM;
333                 port.flags = STD_COM_FLAGS;
334
335 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
336                 gen550_init(0, &port);
337 #endif
338
339                 if (early_serial_setup(&port) != 0)
340                         printk(KERN_WARNING "Early serial init of port 0"
341                                 "failed\n");
342
343                 first_time = 0;
344         }
345
346         return;
347 }
348 #elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
349 static void __init
350 ev64260_early_serial_map(void)
351 {
352 }
353 #endif
354
355 static void __init
356 ev64260_setup_arch(void)
357 {
358         if (ppc_md.progress)
359                 ppc_md.progress("ev64260_setup_arch: enter", 0);
360
361 #ifdef CONFIG_BLK_DEV_INITRD
362         if (initrd_start)
363                 ROOT_DEV = Root_RAM0;
364         else
365 #endif
366 #ifdef  CONFIG_ROOT_NFS
367                 ROOT_DEV = Root_NFS;
368 #else
369                 ROOT_DEV = Root_SDA2;
370 #endif
371
372         if (ppc_md.progress)
373                 ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
374
375         /* Enable L2 and L3 caches (if 745x) */
376         _set_L2CR(_get_L2CR() | L2CR_L2E);
377         _set_L3CR(_get_L3CR() | L3CR_L3E);
378
379         if (ppc_md.progress)
380                 ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
381
382         ev64260_setup_bridge();         /* set up PCI bridge(s) */
383         ev64260_setup_peripherals();    /* set up chip selects/GPP/MPP etc */
384
385         if (ppc_md.progress)
386                 ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
387
388 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
389         ev64260_early_serial_map();
390 #endif
391
392         printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc."
393                 "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
394
395         if (ppc_md.progress)
396                 ppc_md.progress("ev64260_setup_arch: exit", 0);
397
398         return;
399 }
400
401 /* Platform device data fixup routines. */
402 #if defined(CONFIG_SERIAL_MPSC)
403 static void __init
404 ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
405 {
406         struct mpsc_pdata *pdata;
407
408         pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
409
410         pdata->max_idle = 40;
411         pdata->default_baud = EV64260_DEFAULT_BAUD;
412         pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
413         pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
414
415         return;
416 }
417
418 static int __init
419 ev64260_platform_notify(struct device *dev)
420 {
421         static struct {
422                 char    *bus_id;
423                 void    ((*rtn)(struct platform_device *pdev));
424         } dev_map[] = {
425                 { MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
426                 { MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
427         };
428         struct platform_device  *pdev;
429         int     i;
430
431         if (dev && dev->bus_id)
432                 for (i=0; i<ARRAY_SIZE(dev_map); i++)
433                         if (!strncmp(dev->bus_id, dev_map[i].bus_id,
434                                 BUS_ID_SIZE)) {
435
436                                 pdev = container_of(dev,
437                                         struct platform_device, dev);
438                                 dev_map[i].rtn(pdev);
439                         }
440
441         return 0;
442 }
443 #endif
444
445 static void
446 ev64260_reset_board(void *addr)
447 {
448         local_irq_disable();
449
450         /* disable and invalidate the L2 cache */
451         _set_L2CR(0);
452         _set_L2CR(0x200000);
453
454         /* flush and disable L1 I/D cache */
455         __asm__ __volatile__
456         ("mfspr   3,1008\n\t"
457          "ori   5,5,0xcc00\n\t"
458          "ori   4,3,0xc00\n\t"
459          "andc  5,3,5\n\t"
460          "sync\n\t"
461          "mtspr 1008,4\n\t"
462          "isync\n\t"
463          "sync\n\t"
464          "mtspr 1008,5\n\t"
465          "isync\n\t"
466          "sync\n\t");
467
468         /* unmap any other random cs's that might overlap with bootcs */
469         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
470         bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
471         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
472         bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
473         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
474         bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
475         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
476         bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
477
478         /* map bootrom back in to gt @ reset defaults */
479         mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
480                                                 0xff800000, 8*1024*1024, 0);
481         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
482
483         /* move reg base back to default, setup default pci0 */
484         mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
485                 (1<<24) | CONFIG_MV64X60_BASE >> 20);
486
487         /* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
488          * via BAT or MMU, and MSR IR/DR is ON */
489         /* SRR0 has system reset vector, SRR1 has default MSR value */
490         /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
491         /* NOTE: assumes reset vector is at 0xfff00100 */
492         __asm__ __volatile__
493         ("mtspr   26, %0\n\t"
494          "li      4,(1<<6)\n\t"
495          "mtspr   27,4\n\t"
496          "rfi\n\t"
497          :: "r" (addr):"r4");
498
499         return;
500 }
501
502 static void
503 ev64260_restart(char *cmd)
504 {
505         volatile ulong  i = 10000000;
506
507         ev64260_reset_board((void *)0xfff00100);
508
509         while (i-- > 0);
510         panic("restart failed\n");
511 }
512
513 static void
514 ev64260_halt(void)
515 {
516         local_irq_disable();
517         while (1);
518         /* NOTREACHED */
519 }
520
521 static void
522 ev64260_power_off(void)
523 {
524         ev64260_halt();
525         /* NOTREACHED */
526 }
527
528 static int
529 ev64260_show_cpuinfo(struct seq_file *m)
530 {
531         uint pvid;
532
533         pvid = mfspr(SPRN_PVR);
534         seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
535         seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
536         seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
537         seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
538
539         return 0;
540 }
541
542 /* DS1501 RTC has too much variation to use RTC for calibration */
543 static void __init
544 ev64260_calibrate_decr(void)
545 {
546         ulong freq;
547
548         freq = ev64260_get_bus_speed()/4;
549
550         printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
551                freq/1000000, freq%1000000);
552
553         tb_ticks_per_jiffy = freq / HZ;
554         tb_to_us = mulhwu_scale_factor(freq, 1000000);
555
556         return;
557 }
558
559 /*
560  * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
561  */
562 static __inline__ void
563 ev64260_set_bat(void)
564 {
565         mb();
566         mtspr(SPRN_DBAT1U, 0xfb0001fe);
567         mtspr(SPRN_DBAT1L, 0xfb00002a);
568         mb();
569
570         return;
571 }
572
573 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
574 static void __init
575 ev64260_map_io(void)
576 {
577         io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
578 }
579 #endif
580
581 void __init
582 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
583               unsigned long r6, unsigned long r7)
584 {
585 #ifdef CONFIG_BLK_DEV_INITRD
586         extern int      initrd_below_start_ok;
587
588         initrd_start=initrd_end=0;
589         initrd_below_start_ok=0;
590 #endif /* CONFIG_BLK_DEV_INITRD */
591
592         parse_bootinfo(find_bootinfo());
593
594         isa_mem_base = 0;
595         isa_io_base = EV64260_PCI0_IO_CPU_BASE;
596         pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
597
598         loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
599
600         ppc_md.setup_arch = ev64260_setup_arch;
601         ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
602         ppc_md.init_IRQ = gt64260_init_irq;
603         ppc_md.get_irq = gt64260_get_irq;
604
605         ppc_md.restart = ev64260_restart;
606         ppc_md.power_off = ev64260_power_off;
607         ppc_md.halt = ev64260_halt;
608
609         ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
610
611         ppc_md.init = NULL;
612
613         ppc_md.time_init = todc_time_init;
614         ppc_md.set_rtc_time = todc_set_rtc_time;
615         ppc_md.get_rtc_time = todc_get_rtc_time;
616         ppc_md.nvram_read_val = todc_direct_read_val;
617         ppc_md.nvram_write_val = todc_direct_write_val;
618         ppc_md.calibrate_decr = ev64260_calibrate_decr;
619
620         bh.p_base = CONFIG_MV64X60_NEW_BASE;
621
622         ev64260_set_bat();
623
624 #ifdef  CONFIG_SERIAL_8250
625 #if defined(CONFIG_SERIAL_TEXT_DEBUG)
626         ppc_md.setup_io_mappings = ev64260_map_io;
627         ppc_md.progress = gen550_progress;
628 #endif
629 #if defined(CONFIG_KGDB)
630         ppc_md.setup_io_mappings = ev64260_map_io;
631         ppc_md.early_serial_map = ev64260_early_serial_map;
632 #endif
633 #elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
634 #ifdef  CONFIG_SERIAL_TEXT_DEBUG
635         ppc_md.setup_io_mappings = ev64260_map_io;
636         ppc_md.progress = mv64x60_mpsc_progress;
637         mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
638 #endif  /* CONFIG_SERIAL_TEXT_DEBUG */
639 #ifdef  CONFIG_KGDB
640         ppc_md.setup_io_mappings = ev64260_map_io;
641         ppc_md.early_serial_map = ev64260_early_serial_map;
642 #endif  /* CONFIG_KGDB */
643
644 #endif
645
646 #if defined(CONFIG_SERIAL_MPSC)
647         platform_notify = ev64260_platform_notify;
648 #endif
649
650         return;
651 }