arch/ppc/platforms/pmac_pic.c

   1 /*
   2  *  Support for the interrupt controllers found on Power Macintosh,
   3  *  currently Apple's "Grand Central" interrupt controller in all
   4  *  it's incarnations. OpenPIC support used on newer machines is
   5  *  in a separate file
   6  *
   7  *  Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au)
   8  *
   9  *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
  10  *
  11  *  This program is free software; you can redistribute it and/or
  12  *  modify it under the terms of the GNU General Public License
  13  *  as published by the Free Software Foundation; either version
  14  *  2 of the License, or (at your option) any later version.
  15  *
  16  */
  17
  18 #include <linux/config.h>
  19 #include <linux/stddef.h>
  20 #include <linux/init.h>
  21 #include <linux/sched.h>
  22 #include <linux/signal.h>
  23 #include <linux/pci.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/sysdev.h>
  26 #include <linux/adb.h>
  27 #include <linux/pmu.h>
  28
  29 #include <asm/sections.h>
  30 #include <asm/io.h>
  31 #include <asm/smp.h>
  32 #include <asm/prom.h>
  33 #include <asm/pci-bridge.h>
  34 #include <asm/time.h>
  35 #include <asm/open_pic.h>
  36 #include <asm/xmon.h>
  37 #include <asm/pmac_feature.h>
  38 #include <asm/machdep.h>
  39
  40 #include "pmac_pic.h"
  41
  42 /*
  43  * XXX this should be in xmon.h, but putting it there means xmon.h
  44  * has to include <linux/interrupt.h> (to get irqreturn_t), which
  45  * causes all sorts of problems.  -- paulus
  46  */
  47 extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
  48
  49 struct pmac_irq_hw {
  50         unsigned int    event;
  51         unsigned int    enable;
  52         unsigned int    ack;
  53         unsigned int    level;
  54 };
  55
  56 /* Default addresses */
  57 static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
  58         (struct pmac_irq_hw *) 0xf3000020,
  59         (struct pmac_irq_hw *) 0xf3000010,
  60         (struct pmac_irq_hw *) 0xf4000020,
  61         (struct pmac_irq_hw *) 0xf4000010,
  62 };
  63
  64 #define GC_LEVEL_MASK           0x3ff00000
  65 #define OHARE_LEVEL_MASK        0x1ff00000
  66 #define HEATHROW_LEVEL_MASK     0x1ff00000
  67
  68 static int max_irqs;
  69 static int max_real_irqs;
  70 static u32 level_mask[4];
  71
  72 static DEFINE_SPINLOCK(pmac_pic_lock);
  73
  74
  75 #define GATWICK_IRQ_POOL_SIZE        10
  76 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
  77
  78 /*
  79  * Mark an irq as "lost".  This is only used on the pmac
  80  * since it can lose interrupts (see pmac_set_irq_mask).
  81  * -- Cort
  82  */
  83 void
  84 __set_lost(unsigned long irq_nr, int nokick)
  85 {
  86         if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
  87                 atomic_inc(&ppc_n_lost_interrupts);
  88                 if (!nokick)
  89                         set_dec(1);
  90         }
  91 }
  92
  93 static void
  94 pmac_mask_and_ack_irq(unsigned int irq_nr)
  95 {
  96         unsigned long bit = 1UL << (irq_nr & 0x1f);
  97         int i = irq_nr >> 5;
  98         unsigned long flags;
  99
 100         if ((unsigned)irq_nr >= max_irqs)
 101                 return;
 102
 103         clear_bit(irq_nr, ppc_cached_irq_mask);
 104         if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
 105                 atomic_dec(&ppc_n_lost_interrupts);
 106         spin_lock_irqsave(&pmac_pic_lock, flags);
 107         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
 108         out_le32(&pmac_irq_hw[i]->ack, bit);
 109         do {
 110                 /* make sure ack gets to controller before we enable
 111                    interrupts */
 112                 mb();
 113         } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
 114                 != (ppc_cached_irq_mask[i] & bit));
 115         spin_unlock_irqrestore(&pmac_pic_lock, flags);
 116 }
 117
 118 static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
 119 {
 120         unsigned long bit = 1UL << (irq_nr & 0x1f);
 121         int i = irq_nr >> 5;
 122         unsigned long flags;
 123
 124         if ((unsigned)irq_nr >= max_irqs)
 125                 return;
 126
 127         spin_lock_irqsave(&pmac_pic_lock, flags);
 128         /* enable unmasked interrupts */
 129         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
 130
 131         do {
 132                 /* make sure mask gets to controller before we
 133                    return to user */
 134                 mb();
 135         } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
 136                 != (ppc_cached_irq_mask[i] & bit));
 137
 138         /*
 139          * Unfortunately, setting the bit in the enable register
 140          * when the device interrupt is already on *doesn't* set
 141          * the bit in the flag register or request another interrupt.
 142          */
 143         if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
 144                 __set_lost((ulong)irq_nr, nokicklost);
 145         spin_unlock_irqrestore(&pmac_pic_lock, flags);
 146 }
 147
 148 /* When an irq gets requested for the first client, if it's an
 149  * edge interrupt, we clear any previous one on the controller
 150  */
 151 static unsigned int pmac_startup_irq(unsigned int irq_nr)
 152 {
 153         unsigned long bit = 1UL << (irq_nr & 0x1f);
 154         int i = irq_nr >> 5;
 155
 156         if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
 157                 out_le32(&pmac_irq_hw[i]->ack, bit);
 158         set_bit(irq_nr, ppc_cached_irq_mask);
 159         pmac_set_irq_mask(irq_nr, 0);
 160
 161         return 0;
 162 }
 163
 164 static void pmac_mask_irq(unsigned int irq_nr)
 165 {
 166         clear_bit(irq_nr, ppc_cached_irq_mask);
 167         pmac_set_irq_mask(irq_nr, 0);
 168         mb();
 169 }
 170
 171 static void pmac_unmask_irq(unsigned int irq_nr)
 172 {
 173         set_bit(irq_nr, ppc_cached_irq_mask);
 174         pmac_set_irq_mask(irq_nr, 0);
 175 }
 176
 177 static void pmac_end_irq(unsigned int irq_nr)
 178 {
 179         if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
 180             && irq_desc[irq_nr].action) {
 181                 set_bit(irq_nr, ppc_cached_irq_mask);
 182                 pmac_set_irq_mask(irq_nr, 1);
 183         }
 184 }
 185
 186
 187 struct hw_interrupt_type pmac_pic = {
 188         .typename       = " PMAC-PIC ",
 189         .startup        = pmac_startup_irq,
 190         .enable         = pmac_unmask_irq,
 191         .disable        = pmac_mask_irq,
 192         .ack            = pmac_mask_and_ack_irq,
 193         .end            = pmac_end_irq,
 194 };
 195
 196 struct hw_interrupt_type gatwick_pic = {
 197         .typename       = " GATWICK  ",
 198         .startup        = pmac_startup_irq,
 199         .enable         = pmac_unmask_irq,
 200         .disable        = pmac_mask_irq,
 201         .ack            = pmac_mask_and_ack_irq,
 202         .end            = pmac_end_irq,
 203 };
 204
 205 static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
 206 {
 207         int irq, bits;
 208
 209         for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
 210                 int i = irq >> 5;
 211                 bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
 212                 /* We must read level interrupts from the level register */
 213                 bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
 214                 bits &= ppc_cached_irq_mask[i];
 215                 if (bits == 0)
 216                         continue;
 217                 irq += __ilog2(bits);
 218                 __do_IRQ(irq, regs);
 219                 return IRQ_HANDLED;
 220         }
 221         printk("gatwick irq not from gatwick pic\n");
 222         return IRQ_NONE;
 223 }
 224
 225 int
 226 pmac_get_irq(struct pt_regs *regs)
 227 {
 228         int irq;
 229         unsigned long bits = 0;
 230
 231 #ifdef CONFIG_SMP
 232         void psurge_smp_message_recv(struct pt_regs *);
 233
 234         /* IPI's are a hack on the powersurge -- Cort */
 235         if ( smp_processor_id() != 0 ) {
 236                 psurge_smp_message_recv(regs);
 237                 return -2;      /* ignore, already handled */
 238         }
 239 #endif /* CONFIG_SMP */
 240         for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 241                 int i = irq >> 5;
 242                 bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
 243                 /* We must read level interrupts from the level register */
 244                 bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
 245                 bits &= ppc_cached_irq_mask[i];
 246                 if (bits == 0)
 247                         continue;
 248                 irq += __ilog2(bits);
 249                 break;
 250         }
 251
 252         return irq;
 253 }
 254
 255 /* This routine will fix some missing interrupt values in the device tree
 256  * on the gatwick mac-io controller used by some PowerBooks
 257  */
 258 static void __init
 259 pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
 260 {
 261         struct device_node *node;
 262         int count;
 263
 264         memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
 265         node = gw->child;
 266         count = 0;
 267         while(node)
 268         {
 269                 /* Fix SCC */
 270                 if (strcasecmp(node->name, "escc") == 0)
 271                         if (node->child) {
 272                                 if (node->child->n_intrs < 3) {
 273                                         node->child->intrs = &gatwick_int_pool[count];
 274                                         count += 3;
 275                                 }
 276                                 node->child->n_intrs = 3;
 277                                 node->child->intrs[0].line = 15+irq_base;
 278                                 node->child->intrs[1].line =  4+irq_base;
 279                                 node->child->intrs[2].line =  5+irq_base;
 280                                 printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
 281                                         node->child->intrs[0].line,
 282                                         node->child->intrs[1].line,
 283                                         node->child->intrs[2].line);
 284                         }
 285                 /* Fix media-bay & left SWIM */
 286                 if (strcasecmp(node->name, "media-bay") == 0) {
 287                         struct device_node* ya_node;
 288
 289                         if (node->n_intrs == 0)
 290                                 node->intrs = &gatwick_int_pool[count++];
 291                         node->n_intrs = 1;
 292                         node->intrs[0].line = 29+irq_base;
 293                         printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
 294                                         node->intrs[0].line);
 295
 296                         ya_node = node->child;
 297                         while(ya_node)
 298                         {
 299                                 if (strcasecmp(ya_node->name, "floppy") == 0) {
 300                                         if (ya_node->n_intrs < 2) {
 301                                                 ya_node->intrs = &gatwick_int_pool[count];
 302                                                 count += 2;
 303                                         }
 304                                         ya_node->n_intrs = 2;
 305                                         ya_node->intrs[0].line = 19+irq_base;
 306                                         ya_node->intrs[1].line =  1+irq_base;
 307                                         printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
 308                                                 ya_node->intrs[0].line, ya_node->intrs[1].line);
 309                                 }
 310                                 if (strcasecmp(ya_node->name, "ata4") == 0) {
 311                                         if (ya_node->n_intrs < 2) {
 312                                                 ya_node->intrs = &gatwick_int_pool[count];
 313                                                 count += 2;
 314                                         }
 315                                         ya_node->n_intrs = 2;
 316                                         ya_node->intrs[0].line = 14+irq_base;
 317                                         ya_node->intrs[1].line =  3+irq_base;
 318                                         printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
 319                                                 ya_node->intrs[0].line, ya_node->intrs[1].line);
 320                                 }
 321                                 ya_node = ya_node->sibling;
 322                         }
 323                 }
 324                 node = node->sibling;
 325         }
 326         if (count > 10) {
 327                 printk("WARNING !! Gatwick interrupt pool overflow\n");
 328                 printk("  GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
 329                 printk("              requested = %d\n", count);
 330         }
 331 }
 332
 333 /*
 334  * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
 335  * card which includes an ohare chip that acts as a second interrupt
 336  * controller.  If we find this second ohare, set it up and fix the
 337  * interrupt value in the device tree for the ethernet chip.
 338  */
 339 static int __init enable_second_ohare(void)
 340 {
 341         unsigned char bus, devfn;
 342         unsigned short cmd;
 343         unsigned long addr;
 344         struct device_node *irqctrler = find_devices("pci106b,7");
 345         struct device_node *ether;
 346
 347         if (irqctrler == NULL || irqctrler->n_addrs <= 0)
 348                 return -1;
 349         addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
 350         pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
 351         max_irqs = 64;
 352         if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
 353                 struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
 354                 if (!hose)
 355                     printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
 356                 else {
 357                     early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
 358                     cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
 359                     cmd &= ~PCI_COMMAND_IO;
 360                     early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
 361                 }
 362         }
 363
 364         /* Fix interrupt for the modem/ethernet combo controller. The number
 365            in the device tree (27) is bogus (correct for the ethernet-only
 366            board but not the combo ethernet/modem board).
 367            The real interrupt is 28 on the second controller -> 28+32 = 60.
 368         */
 369         ether = find_devices("pci1011,14");
 370         if (ether && ether->n_intrs > 0) {
 371                 ether->intrs[0].line = 60;
 372                 printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
 373                        ether->intrs[0].line);
 374         }
 375
 376         /* Return the interrupt number of the cascade */
 377         return irqctrler->intrs[0].line;
 378 }
 379
 380 #ifdef CONFIG_POWER4
 381 static irqreturn_t k2u3_action(int cpl, void *dev_id, struct pt_regs *regs)
 382 {
 383         int irq;
 384
 385         irq = openpic2_get_irq(regs);
 386         if (irq != -1)
 387                 __do_IRQ(irq, regs);
 388         return IRQ_HANDLED;
 389 }
 390
 391 static struct irqaction k2u3_cascade_action = {
 392         .handler        = k2u3_action,
 393         .flags          = 0,
 394         .mask           = CPU_MASK_NONE,
 395         .name           = "U3->K2 Cascade",
 396 };
 397 #endif /* CONFIG_POWER4 */
 398
 399 #ifdef CONFIG_XMON
 400 static struct irqaction xmon_action = {
 401         .handler        = xmon_irq,
 402         .flags          = 0,
 403         .mask           = CPU_MASK_NONE,
 404         .name           = "NMI - XMON"
 405 };
 406 #endif
 407
 408 static struct irqaction gatwick_cascade_action = {
 409         .handler        = gatwick_action,
 410         .flags          = SA_INTERRUPT,
 411         .mask           = CPU_MASK_NONE,
 412         .name           = "cascade",
 413 };
 414
 415 void __init pmac_pic_init(void)
 416 {
 417         int i;
 418         struct device_node *irqctrler  = NULL;
 419         struct device_node *irqctrler2 = NULL;
 420         struct device_node *np;
 421         unsigned long addr;
 422         int irq_cascade = -1;
 423
 424         /* We first try to detect Apple's new Core99 chipset, since mac-io
 425          * is quite different on those machines and contains an IBM MPIC2.
 426          */
 427         np = find_type_devices("open-pic");
 428         while(np) {
 429                 if (np->parent && !strcmp(np->parent->name, "u3"))
 430                         irqctrler2 = np;
 431                 else
 432                         irqctrler = np;
 433                 np = np->next;
 434         }
 435         if (irqctrler != NULL)
 436         {
 437                 if (irqctrler->n_addrs > 0)
 438                 {
 439                         unsigned char senses[128];
 440
 441                         printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
 442                                irqctrler->addrs[0].address);
 443
 444                         prom_get_irq_senses(senses, 0, 128);
 445                         OpenPIC_InitSenses = senses;
 446                         OpenPIC_NumInitSenses = 128;
 447                         ppc_md.get_irq = openpic_get_irq;
 448                         pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
 449                         OpenPIC_Addr = ioremap(irqctrler->addrs[0].address,
 450                                                irqctrler->addrs[0].size);
 451                         openpic_init(0);
 452
 453 #ifdef CONFIG_POWER4
 454                         if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
 455                             irqctrler2->n_addrs > 0) {
 456                                 printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
 457                                        irqctrler2->addrs[0].address,
 458                                        irqctrler2->intrs[0].line);
 459                                 pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
 460                                 OpenPIC2_Addr = ioremap(irqctrler2->addrs[0].address,
 461                                                         irqctrler2->addrs[0].size);
 462                                 prom_get_irq_senses(senses, PMAC_OPENPIC2_OFFSET,
 463                                                     PMAC_OPENPIC2_OFFSET+128);
 464                                 OpenPIC_InitSenses = senses;
 465                                 OpenPIC_NumInitSenses = 128;
 466                                 openpic2_init(PMAC_OPENPIC2_OFFSET);
 467
 468                                 if (setup_irq(irqctrler2->intrs[0].line,
 469                                               &k2u3_cascade_action))
 470                                         printk("Unable to get OpenPIC IRQ for cascade\n");
 471                         }
 472 #endif /* CONFIG_POWER4 */
 473
 474 #ifdef CONFIG_XMON
 475                         {
 476                                 struct device_node* pswitch;
 477                                 int nmi_irq;
 478
 479                                 pswitch = find_devices("programmer-switch");
 480                                 if (pswitch && pswitch->n_intrs) {
 481                                         nmi_irq = pswitch->intrs[0].line;
 482                                         openpic_init_nmi_irq(nmi_irq);
 483                                         setup_irq(nmi_irq, &xmon_action);
 484                                 }
 485                         }
 486 #endif  /* CONFIG_XMON */
 487                         return;
 488                 }
 489                 irqctrler = NULL;
 490         }
 491
 492         /* Get the level/edge settings, assume if it's not
 493          * a Grand Central nor an OHare, then it's an Heathrow
 494          * (or Paddington).
 495          */
 496         if (find_devices("gc"))
 497                 level_mask[0] = GC_LEVEL_MASK;
 498         else if (find_devices("ohare")) {
 499                 level_mask[0] = OHARE_LEVEL_MASK;
 500                 /* We might have a second cascaded ohare */
 501                 level_mask[1] = OHARE_LEVEL_MASK;
 502         } else {
 503                 level_mask[0] = HEATHROW_LEVEL_MASK;
 504                 level_mask[1] = 0;
 505                 /* We might have a second cascaded heathrow */
 506                 level_mask[2] = HEATHROW_LEVEL_MASK;
 507                 level_mask[3] = 0;
 508         }
 509
 510         /*
 511          * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
 512          * 1998 G3 Series PowerBooks have 128,
 513          * other powermacs have 32.
 514          * The combo ethernet/modem card for the Powerstar powerbooks
 515          * (2400/3400/3500, ohare based) has a second ohare chip
 516          * effectively making a total of 64.
 517          */
 518         max_irqs = max_real_irqs = 32;
 519         irqctrler = find_devices("mac-io");
 520         if (irqctrler)
 521         {
 522                 max_real_irqs = 64;
 523                 if (irqctrler->next)
 524                         max_irqs = 128;
 525                 else
 526                         max_irqs = 64;
 527         }
 528         for ( i = 0; i < max_real_irqs ; i++ )
 529                 irq_desc[i].handler = &pmac_pic;
 530
 531         /* get addresses of first controller */
 532         if (irqctrler) {
 533                 if  (irqctrler->n_addrs > 0) {
 534                         addr = (unsigned long)
 535                                 ioremap(irqctrler->addrs[0].address, 0x40);
 536                         for (i = 0; i < 2; ++i)
 537                                 pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
 538                                         (addr + (2 - i) * 0x10);
 539                 }
 540
 541                 /* get addresses of second controller */
 542                 irqctrler = irqctrler->next;
 543                 if (irqctrler && irqctrler->n_addrs > 0) {
 544                         addr = (unsigned long)
 545                                 ioremap(irqctrler->addrs[0].address, 0x40);
 546                         for (i = 2; i < 4; ++i)
 547                                 pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
 548                                         (addr + (4 - i) * 0x10);
 549                         irq_cascade = irqctrler->intrs[0].line;
 550                         if (device_is_compatible(irqctrler, "gatwick"))
 551                                 pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
 552                 }
 553         } else {
 554                 /* older powermacs have a GC (grand central) or ohare at
 555                    f3000000, with interrupt control registers at f3000020. */
 556                 addr = (unsigned long) ioremap(0xf3000000, 0x40);
 557                 pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
 558         }
 559
 560         /* PowerBooks 3400 and 3500 can have a second controller in a second
 561            ohare chip, on the combo ethernet/modem card */
 562         if (machine_is_compatible("AAPL,3400/2400")
 563              || machine_is_compatible("AAPL,3500"))
 564                 irq_cascade = enable_second_ohare();
 565
 566         /* disable all interrupts in all controllers */
 567         for (i = 0; i * 32 < max_irqs; ++i)
 568                 out_le32(&pmac_irq_hw[i]->enable, 0);
 569         /* mark level interrupts */
 570         for (i = 0; i < max_irqs; i++)
 571                 if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
 572                         irq_desc[i].status = IRQ_LEVEL;
 573
 574         /* get interrupt line of secondary interrupt controller */
 575         if (irq_cascade >= 0) {
 576                 printk(KERN_INFO "irq: secondary controller on irq %d\n",
 577                         (int)irq_cascade);
 578                 for ( i = max_real_irqs ; i < max_irqs ; i++ )
 579                         irq_desc[i].handler = &gatwick_pic;
 580                 setup_irq(irq_cascade, &gatwick_cascade_action);
 581         }
 582         printk("System has %d possible interrupts\n", max_irqs);
 583         if (max_irqs != max_real_irqs)
 584                 printk(KERN_DEBUG "%d interrupts on main controller\n",
 585                         max_real_irqs);
 586
 587 #ifdef CONFIG_XMON
 588         setup_irq(20, &xmon_action);
 589 #endif  /* CONFIG_XMON */
 590 }
 591
 592 #ifdef CONFIG_PM
 593 /*
 594  * These procedures are used in implementing sleep on the powerbooks.
 595  * sleep_save_intrs() saves the states of all interrupt enables
 596  * and disables all interrupts except for the nominated one.
 597  * sleep_restore_intrs() restores the states of all interrupt enables.
 598  */
 599 unsigned long sleep_save_mask[2];
 600
 601 /* This used to be passed by the PMU driver but that link got
 602  * broken with the new driver model. We use this tweak for now...
 603  */
 604 static int pmacpic_find_viaint(void)
 605 {
 606         int viaint = -1;
 607
 608 #ifdef CONFIG_ADB_PMU
 609         struct device_node *np;
 610
 611         if (pmu_get_model() != PMU_OHARE_BASED)
 612                 goto not_found;
 613         np = of_find_node_by_name(NULL, "via-pmu");
 614         if (np == NULL)
 615                 goto not_found;
 616         viaint = np->intrs[0].line;
 617 #endif /* CONFIG_ADB_PMU */
 618
 619 not_found:
 620         return viaint;
 621 }
 622
 623 static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
 624 {
 625         int viaint = pmacpic_find_viaint();
 626
 627         sleep_save_mask[0] = ppc_cached_irq_mask[0];
 628         sleep_save_mask[1] = ppc_cached_irq_mask[1];
 629         ppc_cached_irq_mask[0] = 0;
 630         ppc_cached_irq_mask[1] = 0;
 631         if (viaint > 0)
 632                 set_bit(viaint, ppc_cached_irq_mask);
 633         out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
 634         if (max_real_irqs > 32)
 635                 out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
 636         (void)in_le32(&pmac_irq_hw[0]->event);
 637         /* make sure mask gets to controller before we return to caller */
 638         mb();
 639         (void)in_le32(&pmac_irq_hw[0]->enable);
 640
 641         return 0;
 642 }
 643
 644 static int pmacpic_resume(struct sys_device *sysdev)
 645 {
 646         int i;
 647
 648         out_le32(&pmac_irq_hw[0]->enable, 0);
 649         if (max_real_irqs > 32)
 650                 out_le32(&pmac_irq_hw[1]->enable, 0);
 651         mb();
 652         for (i = 0; i < max_real_irqs; ++i)
 653                 if (test_bit(i, sleep_save_mask))
 654                         pmac_unmask_irq(i);
 655
 656         return 0;
 657 }
 658
 659 #endif /* CONFIG_PM */
 660
 661 static struct sysdev_class pmacpic_sysclass = {
 662         set_kset_name("pmac_pic"),
 663 };
 664
 665 static struct sys_device device_pmacpic = {
 666         .id             = 0,
 667         .cls            = &pmacpic_sysclass,
 668 };
 669
 670 static struct sysdev_driver driver_pmacpic = {
 671 #ifdef CONFIG_PM
 672         .suspend        = &pmacpic_suspend,
 673         .resume         = &pmacpic_resume,
 674 #endif /* CONFIG_PM */
 675 };
 676
 677 static int __init init_pmacpic_sysfs(void)
 678 {
 679         if (max_irqs == 0)
 680                 return -ENODEV;
 681
 682         printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
 683         sysdev_class_register(&pmacpic_sysclass);
 684         sysdev_register(&device_pmacpic);
 685         sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
 686         return 0;
 687 }
 688
 689 subsys_initcall(init_pmacpic_sysfs);
 690