]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/sparc/kernel/sun4m_irq.c
Merge branch 'for-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal...
[karo-tx-linux.git] / arch / sparc / kernel / sun4m_irq.c
1 /*
2  * sun4m irq support
3  *
4  *  djhr: Hacked out of irq.c into a CPU dependent version.
5  *
6  *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
7  *  Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
8  *  Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
9  *  Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
10  */
11
12 #include <asm/timer.h>
13 #include <asm/traps.h>
14 #include <asm/pgalloc.h>
15 #include <asm/pgtable.h>
16 #include <asm/irq.h>
17 #include <asm/io.h>
18 #include <asm/cacheflush.h>
19
20 #include "irq.h"
21 #include "kernel.h"
22
23 /* Sample sun4m IRQ layout:
24  *
25  * 0x22 - Power
26  * 0x24 - ESP SCSI
27  * 0x26 - Lance ethernet
28  * 0x2b - Floppy
29  * 0x2c - Zilog uart
30  * 0x32 - SBUS level 0
31  * 0x33 - Parallel port, SBUS level 1
32  * 0x35 - SBUS level 2
33  * 0x37 - SBUS level 3
34  * 0x39 - Audio, Graphics card, SBUS level 4
35  * 0x3b - SBUS level 5
36  * 0x3d - SBUS level 6
37  *
38  * Each interrupt source has a mask bit in the interrupt registers.
39  * When the mask bit is set, this blocks interrupt deliver.  So you
40  * clear the bit to enable the interrupt.
41  *
42  * Interrupts numbered less than 0x10 are software triggered interrupts
43  * and unused by Linux.
44  *
45  * Interrupt level assignment on sun4m:
46  *
47  *      level           source
48  * ------------------------------------------------------------
49  *        1             softint-1
50  *        2             softint-2, VME/SBUS level 1
51  *        3             softint-3, VME/SBUS level 2
52  *        4             softint-4, onboard SCSI
53  *        5             softint-5, VME/SBUS level 3
54  *        6             softint-6, onboard ETHERNET
55  *        7             softint-7, VME/SBUS level 4
56  *        8             softint-8, onboard VIDEO
57  *        9             softint-9, VME/SBUS level 5, Module Interrupt
58  *       10             softint-10, system counter/timer
59  *       11             softint-11, VME/SBUS level 6, Floppy
60  *       12             softint-12, Keyboard/Mouse, Serial
61  *       13             softint-13, VME/SBUS level 7, ISDN Audio
62  *       14             softint-14, per-processor counter/timer
63  *       15             softint-15, Asynchronous Errors (broadcast)
64  *
65  * Each interrupt source is masked distinctly in the sun4m interrupt
66  * registers.  The PIL level alone is therefore ambiguous, since multiple
67  * interrupt sources map to a single PIL.
68  *
69  * This ambiguity is resolved in the 'intr' property for device nodes
70  * in the OF device tree.  Each 'intr' property entry is composed of
71  * two 32-bit words.  The first word is the IRQ priority value, which
72  * is what we're intersted in.  The second word is the IRQ vector, which
73  * is unused.
74  *
75  * The low 4 bits of the IRQ priority indicate the PIL, and the upper
76  * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled.  0x20
77  * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
78  *
79  * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
80  * whereas a value of 0x33 is SBUS level 2.  Here are some sample
81  * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
82  * Tadpole S3 GX systems.
83  *
84  * esp:         0x24    onboard ESP SCSI
85  * le:          0x26    onboard Lance ETHERNET
86  * p9100:       0x32    SBUS level 1 P9100 video
87  * bpp:         0x33    SBUS level 2 BPP parallel port device
88  * DBRI:        0x39    SBUS level 5 DBRI ISDN audio
89  * SUNW,leo:    0x39    SBUS level 5 LEO video
90  * pcmcia:      0x3b    SBUS level 6 PCMCIA controller
91  * uctrl:       0x3b    SBUS level 6 UCTRL device
92  * modem:       0x3d    SBUS level 7 MODEM
93  * zs:          0x2c    onboard keyboard/mouse/serial
94  * floppy:      0x2b    onboard Floppy
95  * power:       0x22    onboard power device (XXX unknown mask bit XXX)
96  */
97
98
99 /* Code in entry.S needs to get at these register mappings.  */
100 struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
101 struct sun4m_irq_global __iomem *sun4m_irq_global;
102
103 struct sun4m_handler_data {
104         bool    percpu;
105         long    mask;
106 };
107
108 /* Dave Redman (djhr@tadpole.co.uk)
109  * The sun4m interrupt registers.
110  */
111 #define SUN4M_INT_ENABLE        0x80000000
112 #define SUN4M_INT_E14           0x00000080
113 #define SUN4M_INT_E10           0x00080000
114
115 #define SUN4M_INT_MASKALL       0x80000000        /* mask all interrupts */
116 #define SUN4M_INT_MODULE_ERR    0x40000000        /* module error */
117 #define SUN4M_INT_M2S_WRITE_ERR 0x20000000        /* write buffer error */
118 #define SUN4M_INT_ECC_ERR       0x10000000        /* ecc memory error */
119 #define SUN4M_INT_VME_ERR       0x08000000        /* vme async error */
120 #define SUN4M_INT_FLOPPY        0x00400000        /* floppy disk */
121 #define SUN4M_INT_MODULE        0x00200000        /* module interrupt */
122 #define SUN4M_INT_VIDEO         0x00100000        /* onboard video */
123 #define SUN4M_INT_REALTIME      0x00080000        /* system timer */
124 #define SUN4M_INT_SCSI          0x00040000        /* onboard scsi */
125 #define SUN4M_INT_AUDIO         0x00020000        /* audio/isdn */
126 #define SUN4M_INT_ETHERNET      0x00010000        /* onboard ethernet */
127 #define SUN4M_INT_SERIAL        0x00008000        /* serial ports */
128 #define SUN4M_INT_KBDMS         0x00004000        /* keyboard/mouse */
129 #define SUN4M_INT_SBUSBITS      0x00003F80        /* sbus int bits */
130 #define SUN4M_INT_VMEBITS       0x0000007F        /* vme int bits */
131
132 #define SUN4M_INT_ERROR         (SUN4M_INT_MODULE_ERR |    \
133                                  SUN4M_INT_M2S_WRITE_ERR | \
134                                  SUN4M_INT_ECC_ERR |       \
135                                  SUN4M_INT_VME_ERR)
136
137 #define SUN4M_INT_SBUS(x)       (1 << (x+7))
138 #define SUN4M_INT_VME(x)        (1 << (x))
139
140 /* Interrupt levels used by OBP */
141 #define OBP_INT_LEVEL_SOFT      0x10
142 #define OBP_INT_LEVEL_ONBOARD   0x20
143 #define OBP_INT_LEVEL_SBUS      0x30
144 #define OBP_INT_LEVEL_VME       0x40
145
146 #define SUN4M_TIMER_IRQ         (OBP_INT_LEVEL_ONBOARD | 10)
147 #define SUN4M_PROFILE_IRQ       (OBP_INT_LEVEL_ONBOARD | 14)
148
149 static unsigned long sun4m_imask[0x50] = {
150         /* 0x00 - SMP */
151         0,  SUN4M_SOFT_INT(1),
152         SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
153         SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
154         SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
155         SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
156         SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
157         SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
158         SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
159         /* 0x10 - soft */
160         0,  SUN4M_SOFT_INT(1),
161         SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
162         SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
163         SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
164         SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
165         SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
166         SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
167         SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
168         /* 0x20 - onboard */
169         0, 0, 0, 0,
170         SUN4M_INT_SCSI,  0, SUN4M_INT_ETHERNET, 0,
171         SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
172         SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
173         (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
174         SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
175         /* 0x30 - sbus */
176         0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
177         0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
178         0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
179         0, SUN4M_INT_SBUS(6), 0, 0,
180         /* 0x40 - vme */
181         0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
182         0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
183         0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
184         0, SUN4M_INT_VME(6), 0, 0
185 };
186
187 static void sun4m_mask_irq(struct irq_data *data)
188 {
189         struct sun4m_handler_data *handler_data = data->handler_data;
190         int cpu = smp_processor_id();
191
192         if (handler_data->mask) {
193                 unsigned long flags;
194
195                 local_irq_save(flags);
196                 if (handler_data->percpu) {
197                         sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
198                 } else {
199                         sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
200                 }
201                 local_irq_restore(flags);
202         }
203 }
204
205 static void sun4m_unmask_irq(struct irq_data *data)
206 {
207         struct sun4m_handler_data *handler_data = data->handler_data;
208         int cpu = smp_processor_id();
209
210         if (handler_data->mask) {
211                 unsigned long flags;
212
213                 local_irq_save(flags);
214                 if (handler_data->percpu) {
215                         sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
216                 } else {
217                         sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
218                 }
219                 local_irq_restore(flags);
220         }
221 }
222
223 static unsigned int sun4m_startup_irq(struct irq_data *data)
224 {
225         irq_link(data->irq);
226         sun4m_unmask_irq(data);
227         return 0;
228 }
229
230 static void sun4m_shutdown_irq(struct irq_data *data)
231 {
232         sun4m_mask_irq(data);
233         irq_unlink(data->irq);
234 }
235
236 static struct irq_chip sun4m_irq = {
237         .name           = "sun4m",
238         .irq_startup    = sun4m_startup_irq,
239         .irq_shutdown   = sun4m_shutdown_irq,
240         .irq_mask       = sun4m_mask_irq,
241         .irq_unmask     = sun4m_unmask_irq,
242 };
243
244
245 static unsigned int sun4m_build_device_irq(struct platform_device *op,
246                                            unsigned int real_irq)
247 {
248         struct sun4m_handler_data *handler_data;
249         unsigned int irq;
250         unsigned int pil;
251
252         if (real_irq >= OBP_INT_LEVEL_VME) {
253                 prom_printf("Bogus sun4m IRQ %u\n", real_irq);
254                 prom_halt();
255         }
256         pil = (real_irq & 0xf);
257         irq = irq_alloc(real_irq, pil);
258
259         if (irq == 0)
260                 goto out;
261
262         handler_data = irq_get_handler_data(irq);
263         if (unlikely(handler_data))
264                 goto out;
265
266         handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
267         if (unlikely(!handler_data)) {
268                 prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
269                 prom_halt();
270         }
271
272         handler_data->mask = sun4m_imask[real_irq];
273         handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
274         irq_set_chip_and_handler_name(irq, &sun4m_irq,
275                                       handle_level_irq, "level");
276         irq_set_handler_data(irq, handler_data);
277
278 out:
279         return irq;
280 }
281
282 struct sun4m_timer_percpu {
283         u32             l14_limit;
284         u32             l14_count;
285         u32             l14_limit_noclear;
286         u32             user_timer_start_stop;
287 };
288
289 static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
290
291 struct sun4m_timer_global {
292         u32             l10_limit;
293         u32             l10_count;
294         u32             l10_limit_noclear;
295         u32             reserved;
296         u32             timer_config;
297 };
298
299 static struct sun4m_timer_global __iomem *timers_global;
300
301 static void sun4m_clear_clock_irq(void)
302 {
303         sbus_readl(&timers_global->l10_limit);
304 }
305
306 void sun4m_nmi(struct pt_regs *regs)
307 {
308         unsigned long afsr, afar, si;
309
310         printk(KERN_ERR "Aieee: sun4m NMI received!\n");
311         /* XXX HyperSparc hack XXX */
312         __asm__ __volatile__("mov 0x500, %%g1\n\t"
313                              "lda [%%g1] 0x4, %0\n\t"
314                              "mov 0x600, %%g1\n\t"
315                              "lda [%%g1] 0x4, %1\n\t" :
316                              "=r" (afsr), "=r" (afar));
317         printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
318         si = sbus_readl(&sun4m_irq_global->pending);
319         printk(KERN_ERR "si=%08lx\n", si);
320         if (si & SUN4M_INT_MODULE_ERR)
321                 printk(KERN_ERR "Module async error\n");
322         if (si & SUN4M_INT_M2S_WRITE_ERR)
323                 printk(KERN_ERR "MBus/SBus async error\n");
324         if (si & SUN4M_INT_ECC_ERR)
325                 printk(KERN_ERR "ECC memory error\n");
326         if (si & SUN4M_INT_VME_ERR)
327                 printk(KERN_ERR "VME async error\n");
328         printk(KERN_ERR "you lose buddy boy...\n");
329         show_regs(regs);
330         prom_halt();
331 }
332
333 void sun4m_unmask_profile_irq(void)
334 {
335         unsigned long flags;
336
337         local_irq_save(flags);
338         sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
339         local_irq_restore(flags);
340 }
341
342 void sun4m_clear_profile_irq(int cpu)
343 {
344         sbus_readl(&timers_percpu[cpu]->l14_limit);
345 }
346
347 static void sun4m_load_profile_irq(int cpu, unsigned int limit)
348 {
349         unsigned int value = limit ? timer_value(limit) : 0;
350         sbus_writel(value, &timers_percpu[cpu]->l14_limit);
351 }
352
353 static void __init sun4m_init_timers(void)
354 {
355         struct device_node *dp = of_find_node_by_name(NULL, "counter");
356         int i, err, len, num_cpu_timers;
357         unsigned int irq;
358         const u32 *addr;
359
360         if (!dp) {
361                 printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
362                 return;
363         }
364
365         addr = of_get_property(dp, "address", &len);
366         of_node_put(dp);
367         if (!addr) {
368                 printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
369                 return;
370         }
371
372         num_cpu_timers = (len / sizeof(u32)) - 1;
373         for (i = 0; i < num_cpu_timers; i++) {
374                 timers_percpu[i] = (void __iomem *)
375                         (unsigned long) addr[i];
376         }
377         timers_global = (void __iomem *)
378                 (unsigned long) addr[num_cpu_timers];
379
380         /* Every per-cpu timer works in timer mode */
381         sbus_writel(0x00000000, &timers_global->timer_config);
382
383 #ifdef CONFIG_SMP
384         sparc_config.cs_period = SBUS_CLOCK_RATE * 2;  /* 2 seconds */
385         sparc_config.features |= FEAT_L14_ONESHOT;
386 #else
387         sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec  */
388         sparc_config.features |= FEAT_L10_CLOCKEVENT;
389 #endif
390         sparc_config.features |= FEAT_L10_CLOCKSOURCE;
391         sbus_writel(timer_value(sparc_config.cs_period),
392                     &timers_global->l10_limit);
393
394         master_l10_counter = &timers_global->l10_count;
395
396         irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
397
398         err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
399         if (err) {
400                 printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
401                         err);
402                 return;
403         }
404
405         for (i = 0; i < num_cpu_timers; i++)
406                 sbus_writel(0, &timers_percpu[i]->l14_limit);
407         if (num_cpu_timers == 4)
408                 sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
409
410 #ifdef CONFIG_SMP
411         {
412                 unsigned long flags;
413                 struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
414
415                 /* For SMP we use the level 14 ticker, however the bootup code
416                  * has copied the firmware's level 14 vector into the boot cpu's
417                  * trap table, we must fix this now or we get squashed.
418                  */
419                 local_irq_save(flags);
420                 trap_table->inst_one = lvl14_save[0];
421                 trap_table->inst_two = lvl14_save[1];
422                 trap_table->inst_three = lvl14_save[2];
423                 trap_table->inst_four = lvl14_save[3];
424                 local_ops->cache_all();
425                 local_irq_restore(flags);
426         }
427 #endif
428 }
429
430 void __init sun4m_init_IRQ(void)
431 {
432         struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
433         int len, i, mid, num_cpu_iregs;
434         const u32 *addr;
435
436         if (!dp) {
437                 printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
438                 return;
439         }
440
441         addr = of_get_property(dp, "address", &len);
442         of_node_put(dp);
443         if (!addr) {
444                 printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
445                 return;
446         }
447
448         num_cpu_iregs = (len / sizeof(u32)) - 1;
449         for (i = 0; i < num_cpu_iregs; i++) {
450                 sun4m_irq_percpu[i] = (void __iomem *)
451                         (unsigned long) addr[i];
452         }
453         sun4m_irq_global = (void __iomem *)
454                 (unsigned long) addr[num_cpu_iregs];
455
456         local_irq_disable();
457
458         sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
459         for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
460                 sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
461
462         if (num_cpu_iregs == 4)
463                 sbus_writel(0, &sun4m_irq_global->interrupt_target);
464
465         sparc_config.init_timers      = sun4m_init_timers;
466         sparc_config.build_device_irq = sun4m_build_device_irq;
467         sparc_config.clock_rate       = SBUS_CLOCK_RATE;
468         sparc_config.clear_clock_irq  = sun4m_clear_clock_irq;
469         sparc_config.load_profile_irq = sun4m_load_profile_irq;
470
471
472         /* Cannot enable interrupts until OBP ticker is disabled. */
473 }