]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/arcnet/Kconfig
Merge remote-tracking branch 'input-current/for-linus'
[karo-tx-linux.git] / drivers / net / arcnet / Kconfig
1 #
2 # Arcnet configuration
3 #
4
5 menuconfig ARCNET
6         depends on NETDEVICES && (ISA || PCI || PCMCIA)
7         tristate "ARCnet support"
8         ---help---
9           If you have a network card of this type, say Y and check out the
10           (arguably) beautiful poetry in
11           <file:Documentation/networking/arcnet.txt>.
12
13           You need both this driver, and the driver for the particular ARCnet
14           chipset of your card. If you don't know, then it's probably a
15           COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
16           support" below.
17
18           To compile this driver as a module, choose M here. The module will
19           be called arcnet.
20
21 if ARCNET
22
23 config ARCNET_1201
24         tristate "Enable standard ARCNet packet format (RFC 1201)"
25         help
26           This allows you to use RFC1201 with your ARCnet card via the virtual
27           arc0 device.  You need to say Y here to communicate with
28           industry-standard RFC1201 implementations, like the arcether.com
29           packet driver or most DOS/Windows ODI drivers.  Please read the
30           ARCnet documentation in <file:Documentation/networking/arcnet.txt>
31           for more information about using arc0.
32
33 config ARCNET_1051
34         tristate "Enable old ARCNet packet format (RFC 1051)"
35         ---help---
36           This allows you to use RFC1051 with your ARCnet card via the virtual
37           arc0s device. You only need arc0s if you want to talk to ARCnet
38           software complying with the "old" standard, specifically, the DOS
39           arcnet.com packet driver, Amigas running AmiTCP, and some variants
40           of NetBSD. You do not need to say Y here to communicate with
41           industry-standard RFC1201 implementations, like the arcether.com
42           packet driver or most DOS/Windows ODI drivers. RFC1201 is included
43           automatically as the arc0 device. Please read the ARCnet
44           documentation in <file:Documentation/networking/arcnet.txt> for more
45           information about using arc0e and arc0s.
46
47 config ARCNET_RAW
48         tristate "Enable raw mode packet interface"
49         help
50           ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
51           to work unless talking to a copy of the same Linux arcnet driver,
52           but perhaps marginally faster in that case.
53
54 config ARCNET_CAP
55         tristate "Enable CAP mode packet interface"
56         help
57           ARCnet "cap mode" packet encapsulation. Used to get the hardware
58           acknowledge back to userspace. After the initial protocol byte every
59           packet is stuffed with an extra 4 byte "cookie" which doesn't
60           actually appear on the network. After transmit the driver will send
61           back a packet with protocol byte 0 containing the status of the
62           transmission:
63              0=no hardware acknowledge
64              1=excessive nak
65              2=transmission accepted by the receiver hardware
66
67           Received packets are also stuffed with the extra 4 bytes but it will
68           be random data.
69
70           Cap only listens to protocol 1-8.
71
72 config ARCNET_COM90xx
73         tristate "ARCnet COM90xx (normal) chipset driver"
74         help
75           This is the chipset driver for the standard COM90xx cards. If you
76           have always used the old ARCnet driver without knowing what type of
77           card you had, this is probably the one for you.
78
79           To compile this driver as a module, choose M here. The module will
80           be called com90xx.
81
82 config ARCNET_COM90xxIO
83         tristate "ARCnet COM90xx (IO mapped) chipset driver"
84         ---help---
85           This is the chipset driver for the COM90xx cards, using them in
86           IO-mapped mode instead of memory-mapped mode. This is slower than
87           the normal driver. Only use it if your card doesn't support shared
88           memory.
89
90           To compile this driver as a module, choose M here. The module will
91           be called com90io.
92
93 config ARCNET_RIM_I
94         tristate "ARCnet COM90xx (RIM I) chipset driver"
95         ---help---
96           This is yet another chipset driver for the COM90xx cards, but this
97           time only using memory-mapped mode, and no IO ports at all. This
98           driver is completely untested, so if you have one of these cards,
99           please mail <dwmw2@infradead.org>, especially if it works!
100
101           To compile this driver as a module, choose M here. The module will
102           be called arc-rimi.
103
104 config ARCNET_COM20020
105         tristate "ARCnet COM20020 chipset driver"
106         depends on LEDS_CLASS
107         help
108           This is the driver for the new COM20020 chipset. It supports such
109           things as promiscuous mode, so packet sniffing is possible, and
110           extra diagnostic information.
111
112           To compile this driver as a module, choose M here. The module will
113           be called com20020.
114
115 config ARCNET_COM20020_ISA
116         tristate "Support for COM20020 on ISA"
117         depends on ARCNET_COM20020 && ISA
118
119 config ARCNET_COM20020_PCI
120         tristate "Support for COM20020 on PCI"
121         depends on ARCNET_COM20020 && PCI
122
123 config ARCNET_COM20020_CS
124         tristate "COM20020 ARCnet PCMCIA support"
125         depends on ARCNET_COM20020 && PCMCIA
126         help
127           Say Y here if you intend to attach this type of ARCnet PCMCIA card
128           to your computer.
129
130           To compile this driver as a module, choose M here: the module will be
131           called com20020_cs.  If unsure, say N.
132
133 endif # ARCNET