]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/arcnet/com20020_cs.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide
[karo-tx-linux.git] / drivers / net / arcnet / com20020_cs.c
1 /*
2  * Linux ARCnet driver - COM20020 PCMCIA support
3  *
4  * Written 1994-1999 by Avery Pennarun,
5  *    based on an ISA version by David Woodhouse.
6  * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
7  *    which was derived from pcnet_cs.c by David Hinds.
8  * Some additional portions derived from skeleton.c by Donald Becker.
9  *
10  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
11  *  for sponsoring the further development of this driver.
12  *
13  * **********************
14  *
15  * The original copyright of skeleton.c was as follows:
16  *
17  * skeleton.c Written 1993 by Donald Becker.
18  * Copyright 1993 United States Government as represented by the
19  * Director, National Security Agency.  This software may only be used
20  * and distributed according to the terms of the GNU General Public License as
21  * modified by SRC, incorporated herein by reference.
22  *
23  * **********************
24  * Changes:
25  * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
26  * - reorganize kmallocs in com20020_attach, checking all for failure
27  *   and releasing the previous allocations if one fails
28  * **********************
29  *
30  * For more details, see drivers/net/arcnet.c
31  *
32  * **********************
33  */
34
35 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
36
37 #include <linux/kernel.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/delay.h>
43 #include <linux/module.h>
44 #include <linux/netdevice.h>
45 #include <linux/io.h>
46 #include <pcmcia/cistpl.h>
47 #include <pcmcia/ds.h>
48
49 #include "arcdevice.h"
50 #include "com20020.h"
51
52 static void regdump(struct net_device *dev)
53 {
54 #ifdef DEBUG
55         int ioaddr = dev->base_addr;
56         int count;
57
58         netdev_dbg(dev, "register dump:\n");
59         for (count = 0; count < 16; count++) {
60                 if (!(count % 16))
61                         pr_cont("%04X:", ioaddr + count);
62                 pr_cont(" %02X", arcnet_inb(ioaddr, count));
63         }
64         pr_cont("\n");
65
66         netdev_dbg(dev, "buffer0 dump:\n");
67         /* set up the address register */
68         count = 0;
69         arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag,
70                     ioaddr, com20020_REG_W_ADDR_HI);
71         arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
72
73         for (count = 0; count < 256 + 32; count++) {
74                 if (!(count % 16))
75                         pr_cont("%04X:", count);
76
77                 /* copy the data */
78                 pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA));
79         }
80         pr_cont("\n");
81 #endif
82 }
83
84 /*====================================================================*/
85
86 /* Parameters that can be set with 'insmod' */
87
88 static int node;
89 static int timeout = 3;
90 static int backplane;
91 static int clockp;
92 static int clockm;
93
94 module_param(node, int, 0);
95 module_param(timeout, int, 0);
96 module_param(backplane, int, 0);
97 module_param(clockp, int, 0);
98 module_param(clockm, int, 0);
99
100 MODULE_LICENSE("GPL");
101
102 /*====================================================================*/
103
104 static int com20020_config(struct pcmcia_device *link);
105 static void com20020_release(struct pcmcia_device *link);
106
107 static void com20020_detach(struct pcmcia_device *p_dev);
108
109 /*====================================================================*/
110
111 static int com20020_probe(struct pcmcia_device *p_dev)
112 {
113         struct com20020_dev *info;
114         struct net_device *dev;
115         struct arcnet_local *lp;
116
117         dev_dbg(&p_dev->dev, "com20020_attach()\n");
118
119         /* Create new network device */
120         info = kzalloc(sizeof(*info), GFP_KERNEL);
121         if (!info)
122                 goto fail_alloc_info;
123
124         dev = alloc_arcdev("");
125         if (!dev)
126                 goto fail_alloc_dev;
127
128         lp = netdev_priv(dev);
129         lp->timeout = timeout;
130         lp->backplane = backplane;
131         lp->clockp = clockp;
132         lp->clockm = clockm & 3;
133         lp->hw.owner = THIS_MODULE;
134
135         /* fill in our module parameters as defaults */
136         dev->dev_addr[0] = node;
137
138         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
139         p_dev->resource[0]->end = 16;
140         p_dev->config_flags |= CONF_ENABLE_IRQ;
141
142         info->dev = dev;
143         p_dev->priv = info;
144
145         return com20020_config(p_dev);
146
147 fail_alloc_dev:
148         kfree(info);
149 fail_alloc_info:
150         return -ENOMEM;
151 } /* com20020_attach */
152
153 static void com20020_detach(struct pcmcia_device *link)
154 {
155         struct com20020_dev *info = link->priv;
156         struct net_device *dev = info->dev;
157
158         dev_dbg(&link->dev, "detach...\n");
159
160         dev_dbg(&link->dev, "com20020_detach\n");
161
162         dev_dbg(&link->dev, "unregister...\n");
163
164         unregister_netdev(dev);
165
166         /* this is necessary because we register our IRQ separately
167          * from card services.
168          */
169         if (dev->irq)
170                 free_irq(dev->irq, dev);
171
172         com20020_release(link);
173
174         /* Unlink device structure, free bits */
175         dev_dbg(&link->dev, "unlinking...\n");
176         if (link->priv) {
177                 dev = info->dev;
178                 if (dev) {
179                         dev_dbg(&link->dev, "kfree...\n");
180                         free_netdev(dev);
181                 }
182                 dev_dbg(&link->dev, "kfree2...\n");
183                 kfree(info);
184         }
185
186 } /* com20020_detach */
187
188 static int com20020_config(struct pcmcia_device *link)
189 {
190         struct arcnet_local *lp;
191         struct com20020_dev *info;
192         struct net_device *dev;
193         int i, ret;
194         int ioaddr;
195
196         info = link->priv;
197         dev = info->dev;
198
199         dev_dbg(&link->dev, "config...\n");
200
201         dev_dbg(&link->dev, "com20020_config\n");
202
203         dev_dbg(&link->dev, "baseport1 is %Xh\n",
204                 (unsigned int)link->resource[0]->start);
205
206         i = -ENODEV;
207         link->io_lines = 16;
208
209         if (!link->resource[0]->start) {
210                 for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
211                         link->resource[0]->start = ioaddr;
212                         i = pcmcia_request_io(link);
213                         if (i == 0)
214                                 break;
215                 }
216         } else {
217                 i = pcmcia_request_io(link);
218         }
219
220         if (i != 0) {
221                 dev_dbg(&link->dev, "requestIO failed totally!\n");
222                 goto failed;
223         }
224
225         ioaddr = dev->base_addr = link->resource[0]->start;
226         dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
227
228         dev_dbg(&link->dev, "request IRQ %d\n",
229                 link->irq);
230         if (!link->irq) {
231                 dev_dbg(&link->dev, "requestIRQ failed totally!\n");
232                 goto failed;
233         }
234
235         dev->irq = link->irq;
236
237         ret = pcmcia_enable_device(link);
238         if (ret)
239                 goto failed;
240
241         if (com20020_check(dev)) {
242                 regdump(dev);
243                 goto failed;
244         }
245
246         lp = netdev_priv(dev);
247         lp->card_name = "PCMCIA COM20020";
248         lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
249
250         SET_NETDEV_DEV(dev, &link->dev);
251
252         i = com20020_found(dev, 0);     /* calls register_netdev */
253
254         if (i != 0) {
255                 dev_notice(&link->dev,
256                            "com20020_found() failed\n");
257                 goto failed;
258         }
259
260         netdev_dbg(dev, "port %#3lx, irq %d\n",
261                    dev->base_addr, dev->irq);
262         return 0;
263
264 failed:
265         dev_dbg(&link->dev, "com20020_config failed...\n");
266         com20020_release(link);
267         return -ENODEV;
268 } /* com20020_config */
269
270 static void com20020_release(struct pcmcia_device *link)
271 {
272         dev_dbg(&link->dev, "com20020_release\n");
273         pcmcia_disable_device(link);
274 }
275
276 static int com20020_suspend(struct pcmcia_device *link)
277 {
278         struct com20020_dev *info = link->priv;
279         struct net_device *dev = info->dev;
280
281         if (link->open)
282                 netif_device_detach(dev);
283
284         return 0;
285 }
286
287 static int com20020_resume(struct pcmcia_device *link)
288 {
289         struct com20020_dev *info = link->priv;
290         struct net_device *dev = info->dev;
291
292         if (link->open) {
293                 int ioaddr = dev->base_addr;
294                 struct arcnet_local *lp = netdev_priv(dev);
295
296                 arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG);
297                 udelay(5);
298                 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
299         }
300
301         return 0;
302 }
303
304 static const struct pcmcia_device_id com20020_ids[] = {
305         PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
306                                 "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
307         PCMCIA_DEVICE_PROD_ID12("SoHard AG",
308                                 "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
309         PCMCIA_DEVICE_NULL
310 };
311 MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
312
313 static struct pcmcia_driver com20020_cs_driver = {
314         .owner          = THIS_MODULE,
315         .name           = "com20020_cs",
316         .probe          = com20020_probe,
317         .remove         = com20020_detach,
318         .id_table       = com20020_ids,
319         .suspend        = com20020_suspend,
320         .resume         = com20020_resume,
321 };
322 module_pcmcia_driver(com20020_cs_driver);