drivers/net/phy/micrel.c

   1 /*
   2  * drivers/net/phy/micrel.c
   3  *
   4  * Driver for Micrel PHYs
   5  *
   6  * Author: David J. Choi
   7  *
   8  * Copyright (c) 2010-2013 Micrel, Inc.
   9  * Copyright (c) 2014 Johan Hovold <johan@kernel.org>
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  *
  16  * Support : Micrel Phys:
  17  *              Giga phys: ksz9021, ksz9031
  18  *              100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
  19  *                         ksz8021, ksz8031, ksz8051,
  20  *                         ksz8081, ksz8091,
  21  *                         ksz8061,
  22  *              Switch : ksz8873, ksz886x
  23  */
  24
  25 #include <linux/kernel.h>
  26 #include <linux/module.h>
  27 #include <linux/phy.h>
  28 #include <linux/micrel_phy.h>
  29 #include <linux/of.h>
  30 #include <linux/clk.h>
  31
  32 /* Operation Mode Strap Override */
  33 #define MII_KSZPHY_OMSO                         0x16
  34 #define KSZPHY_OMSO_B_CAST_OFF                  BIT(9)
  35 #define KSZPHY_OMSO_NAND_TREE_ON                BIT(5)
  36 #define KSZPHY_OMSO_RMII_OVERRIDE               BIT(1)
  37 #define KSZPHY_OMSO_MII_OVERRIDE                BIT(0)
  38
  39 /* general Interrupt control/status reg in vendor specific block. */
  40 #define MII_KSZPHY_INTCS                        0x1B
  41 #define KSZPHY_INTCS_JABBER                     BIT(15)
  42 #define KSZPHY_INTCS_RECEIVE_ERR                BIT(14)
  43 #define KSZPHY_INTCS_PAGE_RECEIVE               BIT(13)
  44 #define KSZPHY_INTCS_PARELLEL                   BIT(12)
  45 #define KSZPHY_INTCS_LINK_PARTNER_ACK           BIT(11)
  46 #define KSZPHY_INTCS_LINK_DOWN                  BIT(10)
  47 #define KSZPHY_INTCS_REMOTE_FAULT               BIT(9)
  48 #define KSZPHY_INTCS_LINK_UP                    BIT(8)
  49 #define KSZPHY_INTCS_ALL                        (KSZPHY_INTCS_LINK_UP |\
  50                                                 KSZPHY_INTCS_LINK_DOWN)
  51
  52 /* PHY Control 1 */
  53 #define MII_KSZPHY_CTRL_1                       0x1e
  54
  55 /* PHY Control 2 / PHY Control (if no PHY Control 1) */
  56 #define MII_KSZPHY_CTRL_2                       0x1f
  57 #define MII_KSZPHY_CTRL                         MII_KSZPHY_CTRL_2
  58 /* bitmap of PHY register to set interrupt mode */
  59 #define KSZPHY_CTRL_INT_ACTIVE_HIGH             BIT(9)
  60 #define KSZPHY_RMII_REF_CLK_SEL                 BIT(7)
  61
  62 /* Write/read to/from extended registers */
  63 #define MII_KSZPHY_EXTREG                       0x0b
  64 #define KSZPHY_EXTREG_WRITE                     0x8000
  65
  66 #define MII_KSZPHY_EXTREG_WRITE                 0x0c
  67 #define MII_KSZPHY_EXTREG_READ                  0x0d
  68
  69 /* Extended registers */
  70 #define MII_KSZPHY_CLK_CONTROL_PAD_SKEW         0x104
  71 #define MII_KSZPHY_RX_DATA_PAD_SKEW             0x105
  72 #define MII_KSZPHY_TX_DATA_PAD_SKEW             0x106
  73
  74 #define PS_TO_REG                               200
  75
  76 struct kszphy_type {
  77         u32 led_mode_reg;
  78         u16 interrupt_level_mask;
  79         bool has_broadcast_disable;
  80         bool has_nand_tree_disable;
  81         bool has_rmii_ref_clk_sel;
  82 };
  83
  84 struct kszphy_priv {
  85         const struct kszphy_type *type;
  86         int led_mode;
  87         bool rmii_ref_clk_sel;
  88         bool rmii_ref_clk_sel_val;
  89 };
  90
  91 static const struct kszphy_type ksz8021_type = {
  92         .led_mode_reg           = MII_KSZPHY_CTRL_2,
  93         .has_broadcast_disable  = true,
  94         .has_nand_tree_disable  = true,
  95         .has_rmii_ref_clk_sel   = true,
  96 };
  97
  98 static const struct kszphy_type ksz8041_type = {
  99         .led_mode_reg           = MII_KSZPHY_CTRL_1,
 100 };
 101
 102 static const struct kszphy_type ksz8051_type = {
 103         .led_mode_reg           = MII_KSZPHY_CTRL_2,
 104         .has_nand_tree_disable  = true,
 105 };
 106
 107 static const struct kszphy_type ksz8081_type = {
 108         .led_mode_reg           = MII_KSZPHY_CTRL_2,
 109         .has_broadcast_disable  = true,
 110         .has_nand_tree_disable  = true,
 111         .has_rmii_ref_clk_sel   = true,
 112 };
 113
 114 static const struct kszphy_type ks8737_type = {
 115         .interrupt_level_mask   = BIT(14),
 116 };
 117
 118 static const struct kszphy_type ksz9021_type = {
 119         .interrupt_level_mask   = BIT(14),
 120 };
 121
 122 static int kszphy_extended_write(struct phy_device *phydev,
 123                                 u32 regnum, u16 val)
 124 {
 125         phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
 126         return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
 127 }
 128
 129 static int kszphy_extended_read(struct phy_device *phydev,
 130                                 u32 regnum)
 131 {
 132         phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
 133         return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
 134 }
 135
 136 static int kszphy_ack_interrupt(struct phy_device *phydev)
 137 {
 138         /* bit[7..0] int status, which is a read and clear register. */
 139         int rc;
 140
 141         rc = phy_read(phydev, MII_KSZPHY_INTCS);
 142
 143         return (rc < 0) ? rc : 0;
 144 }
 145
 146 static int kszphy_config_intr(struct phy_device *phydev)
 147 {
 148         const struct kszphy_type *type = phydev->drv->driver_data;
 149         int temp;
 150         u16 mask;
 151
 152         if (type && type->interrupt_level_mask)
 153                 mask = type->interrupt_level_mask;
 154         else
 155                 mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
 156
 157         /* set the interrupt pin active low */
 158         temp = phy_read(phydev, MII_KSZPHY_CTRL);
 159         if (temp < 0)
 160                 return temp;
 161         temp &= ~mask;
 162         phy_write(phydev, MII_KSZPHY_CTRL, temp);
 163
 164         /* enable / disable interrupts */
 165         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 166                 temp = KSZPHY_INTCS_ALL;
 167         else
 168                 temp = 0;
 169
 170         return phy_write(phydev, MII_KSZPHY_INTCS, temp);
 171 }
 172
 173 static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
 174 {
 175         int ctrl;
 176
 177         ctrl = phy_read(phydev, MII_KSZPHY_CTRL);
 178         if (ctrl < 0)
 179                 return ctrl;
 180
 181         if (val)
 182                 ctrl |= KSZPHY_RMII_REF_CLK_SEL;
 183         else
 184                 ctrl &= ~KSZPHY_RMII_REF_CLK_SEL;
 185
 186         return phy_write(phydev, MII_KSZPHY_CTRL, ctrl);
 187 }
 188
 189 static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
 190 {
 191         int rc, temp, shift;
 192
 193         switch (reg) {
 194         case MII_KSZPHY_CTRL_1:
 195                 shift = 14;
 196                 break;
 197         case MII_KSZPHY_CTRL_2:
 198                 shift = 4;
 199                 break;
 200         default:
 201                 return -EINVAL;
 202         }
 203
 204         temp = phy_read(phydev, reg);
 205         if (temp < 0) {
 206                 rc = temp;
 207                 goto out;
 208         }
 209
 210         temp &= ~(3 << shift);
 211         temp |= val << shift;
 212         rc = phy_write(phydev, reg, temp);
 213 out:
 214         if (rc < 0)
 215                 dev_err(&phydev->dev, "failed to set led mode\n");
 216
 217         return rc;
 218 }
 219
 220 /* Disable PHY address 0 as the broadcast address, so that it can be used as a
 221  * unique (non-broadcast) address on a shared bus.
 222  */
 223 static int kszphy_broadcast_disable(struct phy_device *phydev)
 224 {
 225         int ret;
 226
 227         ret = phy_read(phydev, MII_KSZPHY_OMSO);
 228         if (ret < 0)
 229                 goto out;
 230
 231         ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
 232 out:
 233         if (ret)
 234                 dev_err(&phydev->dev, "failed to disable broadcast address\n");
 235
 236         return ret;
 237 }
 238
 239 static int kszphy_nand_tree_disable(struct phy_device *phydev)
 240 {
 241         int ret;
 242
 243         ret = phy_read(phydev, MII_KSZPHY_OMSO);
 244         if (ret < 0)
 245                 goto out;
 246
 247         if (!(ret & KSZPHY_OMSO_NAND_TREE_ON))
 248                 return 0;
 249
 250         ret = phy_write(phydev, MII_KSZPHY_OMSO,
 251                         ret & ~KSZPHY_OMSO_NAND_TREE_ON);
 252 out:
 253         if (ret)
 254                 dev_err(&phydev->dev, "failed to disable NAND tree mode\n");
 255
 256         return ret;
 257 }
 258
 259 static int kszphy_config_init(struct phy_device *phydev)
 260 {
 261         struct kszphy_priv *priv = phydev->priv;
 262         const struct kszphy_type *type;
 263         int ret;
 264
 265         if (!priv)
 266                 return 0;
 267
 268         type = priv->type;
 269
 270         if (type->has_broadcast_disable)
 271                 kszphy_broadcast_disable(phydev);
 272
 273         if (type->has_nand_tree_disable)
 274                 kszphy_nand_tree_disable(phydev);
 275
 276         if (priv->rmii_ref_clk_sel) {
 277                 ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
 278                 if (ret) {
 279                         dev_err(&phydev->dev, "failed to set rmii reference clock\n");
 280                         return ret;
 281                 }
 282         }
 283
 284         if (priv->led_mode >= 0)
 285                 kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
 286
 287         return 0;
 288 }
 289
 290 static int ksz9021_load_values_from_of(struct phy_device *phydev,
 291                                        const struct device_node *of_node,
 292                                        u16 reg,
 293                                        const char *field1, const char *field2,
 294                                        const char *field3, const char *field4)
 295 {
 296         int val1 = -1;
 297         int val2 = -2;
 298         int val3 = -3;
 299         int val4 = -4;
 300         int newval;
 301         int matches = 0;
 302
 303         if (!of_property_read_u32(of_node, field1, &val1))
 304                 matches++;
 305
 306         if (!of_property_read_u32(of_node, field2, &val2))
 307                 matches++;
 308
 309         if (!of_property_read_u32(of_node, field3, &val3))
 310                 matches++;
 311
 312         if (!of_property_read_u32(of_node, field4, &val4))
 313                 matches++;
 314
 315         if (!matches)
 316                 return 0;
 317
 318         if (matches < 4)
 319                 newval = kszphy_extended_read(phydev, reg);
 320         else
 321                 newval = 0;
 322
 323         if (val1 != -1)
 324                 newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
 325
 326         if (val2 != -2)
 327                 newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
 328
 329         if (val3 != -3)
 330                 newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
 331
 332         if (val4 != -4)
 333                 newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
 334
 335         return kszphy_extended_write(phydev, reg, newval);
 336 }
 337
 338 static int ksz9021_config_init(struct phy_device *phydev)
 339 {
 340         const struct device *dev = &phydev->dev;
 341         const struct device_node *of_node = dev->of_node;
 342
 343         if (!of_node && dev->parent->of_node)
 344                 of_node = dev->parent->of_node;
 345
 346         if (of_node) {
 347                 ksz9021_load_values_from_of(phydev, of_node,
 348                                     MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
 349                                     "txen-skew-ps", "txc-skew-ps",
 350                                     "rxdv-skew-ps", "rxc-skew-ps");
 351                 ksz9021_load_values_from_of(phydev, of_node,
 352                                     MII_KSZPHY_RX_DATA_PAD_SKEW,
 353                                     "rxd0-skew-ps", "rxd1-skew-ps",
 354                                     "rxd2-skew-ps", "rxd3-skew-ps");
 355                 ksz9021_load_values_from_of(phydev, of_node,
 356                                     MII_KSZPHY_TX_DATA_PAD_SKEW,
 357                                     "txd0-skew-ps", "txd1-skew-ps",
 358                                     "txd2-skew-ps", "txd3-skew-ps");
 359         }
 360         return 0;
 361 }
 362
 363 #define MII_KSZ9031RN_MMD_CTRL_REG      0x0d
 364 #define MII_KSZ9031RN_MMD_REGDATA_REG   0x0e
 365 #define OP_DATA                         1
 366 #define KSZ9031_PS_TO_REG               60
 367
 368 /* Extended registers */
 369 /* MMD Address 0x0 */
 370 #define MII_KSZ9031RN_FLP_BURST_TX_LO   3
 371 #define MII_KSZ9031RN_FLP_BURST_TX_HI   4
 372
 373 /* MMD Address 0x2 */
 374 #define MII_KSZ9031RN_CONTROL_PAD_SKEW  4
 375 #define MII_KSZ9031RN_RX_DATA_PAD_SKEW  5
 376 #define MII_KSZ9031RN_TX_DATA_PAD_SKEW  6
 377 #define MII_KSZ9031RN_CLK_PAD_SKEW      8
 378
 379 static int ksz9031_extended_write(struct phy_device *phydev,
 380                                   u8 mode, u32 dev_addr, u32 regnum, u16 val)
 381 {
 382         phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
 383         phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
 384         phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
 385         return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
 386 }
 387
 388 static int ksz9031_extended_read(struct phy_device *phydev,
 389                                  u8 mode, u32 dev_addr, u32 regnum)
 390 {
 391         phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
 392         phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
 393         phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
 394         return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
 395 }
 396
 397 static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 398                                        const struct device_node *of_node,
 399                                        u16 reg, size_t field_sz,
 400                                        const char *field[], u8 numfields)
 401 {
 402         int val[4] = {-1, -2, -3, -4};
 403         int matches = 0;
 404         u16 mask;
 405         u16 maxval;
 406         u16 newval;
 407         int i;
 408
 409         for (i = 0; i < numfields; i++)
 410                 if (!of_property_read_u32(of_node, field[i], val + i))
 411                         matches++;
 412
 413         if (!matches)
 414                 return 0;
 415
 416         if (matches < numfields)
 417                 newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
 418         else
 419                 newval = 0;
 420
 421         maxval = (field_sz == 4) ? 0xf : 0x1f;
 422         for (i = 0; i < numfields; i++)
 423                 if (val[i] != -(i + 1)) {
 424                         mask = 0xffff;
 425                         mask ^= maxval << (field_sz * i);
 426                         newval = (newval & mask) |
 427                                 (((val[i] / KSZ9031_PS_TO_REG) & maxval)
 428                                         << (field_sz * i));
 429                 }
 430
 431         return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
 432 }
 433
 434 static int ksz9031_center_flp_timing(struct phy_device *phydev)
 435 {
 436         int result;
 437
 438         /* Center KSZ9031RNX FLP timing at 16ms. */
 439         result = ksz9031_extended_write(phydev, OP_DATA, 0,
 440                                         MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006);
 441         result = ksz9031_extended_write(phydev, OP_DATA, 0,
 442                                         MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80);
 443
 444         if (result)
 445                 return result;
 446
 447         return genphy_restart_aneg(phydev);
 448 }
 449
 450 static int ksz9031_config_init(struct phy_device *phydev)
 451 {
 452         const struct device *dev = &phydev->dev;
 453         const struct device_node *of_node = dev->of_node;
 454         static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
 455         static const char *rx_data_skews[4] = {
 456                 "rxd0-skew-ps", "rxd1-skew-ps",
 457                 "rxd2-skew-ps", "rxd3-skew-ps"
 458         };
 459         static const char *tx_data_skews[4] = {
 460                 "txd0-skew-ps", "txd1-skew-ps",
 461                 "txd2-skew-ps", "txd3-skew-ps"
 462         };
 463         static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
 464
 465         if (!of_node && dev->parent->of_node)
 466                 of_node = dev->parent->of_node;
 467
 468         if (of_node) {
 469                 ksz9031_of_load_skew_values(phydev, of_node,
 470                                 MII_KSZ9031RN_CLK_PAD_SKEW, 5,
 471                                 clk_skews, 2);
 472
 473                 ksz9031_of_load_skew_values(phydev, of_node,
 474                                 MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
 475                                 control_skews, 2);
 476
 477                 ksz9031_of_load_skew_values(phydev, of_node,
 478                                 MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
 479                                 rx_data_skews, 4);
 480
 481                 ksz9031_of_load_skew_values(phydev, of_node,
 482                                 MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
 483                                 tx_data_skews, 4);
 484         }
 485
 486         return ksz9031_center_flp_timing(phydev);
 487 }
 488
 489 #define KSZ8873MLL_GLOBAL_CONTROL_4     0x06
 490 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX      BIT(6)
 491 #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED       BIT(4)
 492 static int ksz8873mll_read_status(struct phy_device *phydev)
 493 {
 494         int regval;
 495
 496         /* dummy read */
 497         regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
 498
 499         regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
 500
 501         if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
 502                 phydev->duplex = DUPLEX_HALF;
 503         else
 504                 phydev->duplex = DUPLEX_FULL;
 505
 506         if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
 507                 phydev->speed = SPEED_10;
 508         else
 509                 phydev->speed = SPEED_100;
 510
 511         phydev->link = 1;
 512         phydev->pause = phydev->asym_pause = 0;
 513
 514         return 0;
 515 }
 516
 517 static int ksz8873mll_config_aneg(struct phy_device *phydev)
 518 {
 519         return 0;
 520 }
 521
 522 /* This routine returns -1 as an indication to the caller that the
 523  * Micrel ksz9021 10/100/1000 PHY does not support standard IEEE
 524  * MMD extended PHY registers.
 525  */
 526 static int
 527 ksz9021_rd_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
 528                       int regnum)
 529 {
 530         return -1;
 531 }
 532
 533 /* This routine does nothing since the Micrel ksz9021 does not support
 534  * standard IEEE MMD extended PHY registers.
 535  */
 536 static void
 537 ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
 538                       int regnum, u32 val)
 539 {
 540 }
 541
 542 static int kszphy_probe(struct phy_device *phydev)
 543 {
 544         const struct kszphy_type *type = phydev->drv->driver_data;
 545         const struct device_node *np = phydev->dev.of_node;
 546         struct kszphy_priv *priv;
 547         struct clk *clk;
 548         int ret;
 549
 550         priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL);
 551         if (!priv)
 552                 return -ENOMEM;
 553
 554         phydev->priv = priv;
 555
 556         priv->type = type;
 557
 558         if (type->led_mode_reg) {
 559                 ret = of_property_read_u32(np, "micrel,led-mode",
 560                                 &priv->led_mode);
 561                 if (ret)
 562                         priv->led_mode = -1;
 563
 564                 if (priv->led_mode > 3) {
 565                         dev_err(&phydev->dev, "invalid led mode: 0x%02x\n",
 566                                         priv->led_mode);
 567                         priv->led_mode = -1;
 568                 }
 569         } else {
 570                 priv->led_mode = -1;
 571         }
 572
 573         clk = devm_clk_get(&phydev->dev, "rmii-ref");
 574         /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
 575         if (!IS_ERR_OR_NULL(clk)) {
 576                 unsigned long rate = clk_get_rate(clk);
 577                 bool rmii_ref_clk_sel_25_mhz;
 578
 579                 priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
 580                 rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
 581                                 "micrel,rmii-reference-clock-select-25-mhz");
 582
 583                 if (rate > 24500000 && rate < 25500000) {
 584                         priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz;
 585                 } else if (rate > 49500000 && rate < 50500000) {
 586                         priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
 587                 } else {
 588                         dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate);
 589                         return -EINVAL;
 590                 }
 591         }
 592
 593         /* Support legacy board-file configuration */
 594         if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
 595                 priv->rmii_ref_clk_sel = true;
 596                 priv->rmii_ref_clk_sel_val = true;
 597         }
 598
 599         return 0;
 600 }
 601
 602 static struct phy_driver ksphy_driver[] = {
 603 {
 604         .phy_id         = PHY_ID_KS8737,
 605         .phy_id_mask    = 0x00fffff0,
 606         .name           = "Micrel KS8737",
 607         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 608         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 609         .driver_data    = &ks8737_type,
 610         .config_init    = kszphy_config_init,
 611         .config_aneg    = genphy_config_aneg,
 612         .read_status    = genphy_read_status,
 613         .ack_interrupt  = kszphy_ack_interrupt,
 614         .config_intr    = kszphy_config_intr,
 615         .suspend        = genphy_suspend,
 616         .resume         = genphy_resume,
 617         .driver         = { .owner = THIS_MODULE,},
 618 }, {
 619         .phy_id         = PHY_ID_KSZ8021,
 620         .phy_id_mask    = 0x00ffffff,
 621         .name           = "Micrel KSZ8021 or KSZ8031",
 622         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
 623                            SUPPORTED_Asym_Pause),
 624         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 625         .driver_data    = &ksz8021_type,
 626         .probe          = kszphy_probe,
 627         .config_init    = kszphy_config_init,
 628         .config_aneg    = genphy_config_aneg,
 629         .read_status    = genphy_read_status,
 630         .ack_interrupt  = kszphy_ack_interrupt,
 631         .config_intr    = kszphy_config_intr,
 632         .suspend        = genphy_suspend,
 633         .resume         = genphy_resume,
 634         .driver         = { .owner = THIS_MODULE,},
 635 }, {
 636         .phy_id         = PHY_ID_KSZ8031,
 637         .phy_id_mask    = 0x00ffffff,
 638         .name           = "Micrel KSZ8031",
 639         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
 640                            SUPPORTED_Asym_Pause),
 641         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 642         .driver_data    = &ksz8021_type,
 643         .probe          = kszphy_probe,
 644         .config_init    = kszphy_config_init,
 645         .config_aneg    = genphy_config_aneg,
 646         .read_status    = genphy_read_status,
 647         .ack_interrupt  = kszphy_ack_interrupt,
 648         .config_intr    = kszphy_config_intr,
 649         .suspend        = genphy_suspend,
 650         .resume         = genphy_resume,
 651         .driver         = { .owner = THIS_MODULE,},
 652 }, {
 653         .phy_id         = PHY_ID_KSZ8041,
 654         .phy_id_mask    = 0x00fffff0,
 655         .name           = "Micrel KSZ8041",
 656         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 657                                 | SUPPORTED_Asym_Pause),
 658         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 659         .driver_data    = &ksz8041_type,
 660         .probe          = kszphy_probe,
 661         .config_init    = kszphy_config_init,
 662         .config_aneg    = genphy_config_aneg,
 663         .read_status    = genphy_read_status,
 664         .ack_interrupt  = kszphy_ack_interrupt,
 665         .config_intr    = kszphy_config_intr,
 666         .suspend        = genphy_suspend,
 667         .resume         = genphy_resume,
 668         .driver         = { .owner = THIS_MODULE,},
 669 }, {
 670         .phy_id         = PHY_ID_KSZ8041RNLI,
 671         .phy_id_mask    = 0x00fffff0,
 672         .name           = "Micrel KSZ8041RNLI",
 673         .features       = PHY_BASIC_FEATURES |
 674                           SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 675         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 676         .driver_data    = &ksz8041_type,
 677         .probe          = kszphy_probe,
 678         .config_init    = kszphy_config_init,
 679         .config_aneg    = genphy_config_aneg,
 680         .read_status    = genphy_read_status,
 681         .ack_interrupt  = kszphy_ack_interrupt,
 682         .config_intr    = kszphy_config_intr,
 683         .suspend        = genphy_suspend,
 684         .resume         = genphy_resume,
 685         .driver         = { .owner = THIS_MODULE,},
 686 }, {
 687         .phy_id         = PHY_ID_KSZ8051,
 688         .phy_id_mask    = 0x00fffff0,
 689         .name           = "Micrel KSZ8051",
 690         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 691                                 | SUPPORTED_Asym_Pause),
 692         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 693         .driver_data    = &ksz8051_type,
 694         .probe          = kszphy_probe,
 695         .config_init    = kszphy_config_init,
 696         .config_aneg    = genphy_config_aneg,
 697         .read_status    = genphy_read_status,
 698         .ack_interrupt  = kszphy_ack_interrupt,
 699         .config_intr    = kszphy_config_intr,
 700         .suspend        = genphy_suspend,
 701         .resume         = genphy_resume,
 702         .driver         = { .owner = THIS_MODULE,},
 703 }, {
 704         .phy_id         = PHY_ID_KSZ8001,
 705         .name           = "Micrel KSZ8001 or KS8721",
 706         .phy_id_mask    = 0x00ffffff,
 707         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 708         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 709         .driver_data    = &ksz8041_type,
 710         .probe          = kszphy_probe,
 711         .config_init    = kszphy_config_init,
 712         .config_aneg    = genphy_config_aneg,
 713         .read_status    = genphy_read_status,
 714         .ack_interrupt  = kszphy_ack_interrupt,
 715         .config_intr    = kszphy_config_intr,
 716         .suspend        = genphy_suspend,
 717         .resume         = genphy_resume,
 718         .driver         = { .owner = THIS_MODULE,},
 719 }, {
 720         .phy_id         = PHY_ID_KSZ8081,
 721         .name           = "Micrel KSZ8081 or KSZ8091",
 722         .phy_id_mask    = 0x00fffff0,
 723         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 724         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 725         .driver_data    = &ksz8081_type,
 726         .probe          = kszphy_probe,
 727         .config_init    = kszphy_config_init,
 728         .config_aneg    = genphy_config_aneg,
 729         .read_status    = genphy_read_status,
 730         .ack_interrupt  = kszphy_ack_interrupt,
 731         .config_intr    = kszphy_config_intr,
 732         .suspend        = genphy_suspend,
 733         .resume         = genphy_resume,
 734         .driver         = { .owner = THIS_MODULE,},
 735 }, {
 736         .phy_id         = PHY_ID_KSZ8061,
 737         .name           = "Micrel KSZ8061",
 738         .phy_id_mask    = 0x00fffff0,
 739         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 740         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 741         .config_init    = kszphy_config_init,
 742         .config_aneg    = genphy_config_aneg,
 743         .read_status    = genphy_read_status,
 744         .ack_interrupt  = kszphy_ack_interrupt,
 745         .config_intr    = kszphy_config_intr,
 746         .suspend        = genphy_suspend,
 747         .resume         = genphy_resume,
 748         .driver         = { .owner = THIS_MODULE,},
 749 }, {
 750         .phy_id         = PHY_ID_KSZ9021,
 751         .phy_id_mask    = 0x000ffffe,
 752         .name           = "Micrel KSZ9021 Gigabit PHY",
 753         .features       = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
 754         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 755         .driver_data    = &ksz9021_type,
 756         .config_init    = ksz9021_config_init,
 757         .config_aneg    = genphy_config_aneg,
 758         .read_status    = genphy_read_status,
 759         .ack_interrupt  = kszphy_ack_interrupt,
 760         .config_intr    = kszphy_config_intr,
 761         .suspend        = genphy_suspend,
 762         .resume         = genphy_resume,
 763         .read_mmd_indirect = ksz9021_rd_mmd_phyreg,
 764         .write_mmd_indirect = ksz9021_wr_mmd_phyreg,
 765         .driver         = { .owner = THIS_MODULE, },
 766 }, {
 767         .phy_id         = PHY_ID_KSZ9031,
 768         .phy_id_mask    = 0x00fffff0,
 769         .name           = "Micrel KSZ9031 Gigabit PHY",
 770         .features       = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
 771         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 772         .driver_data    = &ksz9021_type,
 773         .config_init    = ksz9031_config_init,
 774         .config_aneg    = genphy_config_aneg,
 775         .read_status    = genphy_read_status,
 776         .ack_interrupt  = kszphy_ack_interrupt,
 777         .config_intr    = kszphy_config_intr,
 778         .suspend        = genphy_suspend,
 779         .resume         = genphy_resume,
 780         .driver         = { .owner = THIS_MODULE, },
 781 }, {
 782         .phy_id         = PHY_ID_KSZ8873MLL,
 783         .phy_id_mask    = 0x00fffff0,
 784         .name           = "Micrel KSZ8873MLL Switch",
 785         .features       = (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
 786         .flags          = PHY_HAS_MAGICANEG,
 787         .config_init    = kszphy_config_init,
 788         .config_aneg    = ksz8873mll_config_aneg,
 789         .read_status    = ksz8873mll_read_status,
 790         .suspend        = genphy_suspend,
 791         .resume         = genphy_resume,
 792         .driver         = { .owner = THIS_MODULE, },
 793 }, {
 794         .phy_id         = PHY_ID_KSZ886X,
 795         .phy_id_mask    = 0x00fffff0,
 796         .name           = "Micrel KSZ886X Switch",
 797         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 798         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 799         .config_init    = kszphy_config_init,
 800         .config_aneg    = genphy_config_aneg,
 801         .read_status    = genphy_read_status,
 802         .suspend        = genphy_suspend,
 803         .resume         = genphy_resume,
 804         .driver         = { .owner = THIS_MODULE, },
 805 } };
 806
 807 module_phy_driver(ksphy_driver);
 808
 809 MODULE_DESCRIPTION("Micrel PHY driver");
 810 MODULE_AUTHOR("David J. Choi");
 811 MODULE_LICENSE("GPL");
 812
 813 static struct mdio_device_id __maybe_unused micrel_tbl[] = {
 814         { PHY_ID_KSZ9021, 0x000ffffe },
 815         { PHY_ID_KSZ9031, 0x00fffff0 },
 816         { PHY_ID_KSZ8001, 0x00ffffff },
 817         { PHY_ID_KS8737, 0x00fffff0 },
 818         { PHY_ID_KSZ8021, 0x00ffffff },
 819         { PHY_ID_KSZ8031, 0x00ffffff },
 820         { PHY_ID_KSZ8041, 0x00fffff0 },
 821         { PHY_ID_KSZ8051, 0x00fffff0 },
 822         { PHY_ID_KSZ8061, 0x00fffff0 },
 823         { PHY_ID_KSZ8081, 0x00fffff0 },
 824         { PHY_ID_KSZ8873MLL, 0x00fffff0 },
 825         { PHY_ID_KSZ886X, 0x00fffff0 },
 826         { }
 827 };
 828
 829 MODULE_DEVICE_TABLE(mdio, micrel_tbl);