]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/wireless/brcm80211/brcmfmac/core.h
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide
[karo-tx-linux.git] / drivers / net / wireless / brcm80211 / brcmfmac / core.h
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 /****************
18  * Common types *
19  */
20
21 #ifndef BRCMFMAC_CORE_H
22 #define BRCMFMAC_CORE_H
23
24 #include <net/cfg80211.h>
25 #include "fweh.h"
26
27 #define TOE_TX_CSUM_OL          0x00000001
28 #define TOE_RX_CSUM_OL          0x00000002
29
30 /* For supporting multiple interfaces */
31 #define BRCMF_MAX_IFS   16
32
33 /* Small, medium and maximum buffer size for dcmd
34  */
35 #define BRCMF_DCMD_SMLEN        256
36 #define BRCMF_DCMD_MEDLEN       1536
37 #define BRCMF_DCMD_MAXLEN       8192
38
39 /* IOCTL from host to device are limited in lenght. A device can only handle
40  * ethernet frame size. This limitation is to be applied by protocol layer.
41  */
42 #define BRCMF_TX_IOCTL_MAX_MSG_SIZE     (ETH_FRAME_LEN+ETH_FCS_LEN)
43
44 #define BRCMF_AMPDU_RX_REORDER_MAXFLOWS         256
45
46 /* Length of firmware version string stored for
47  * ethtool driver info which uses 32 bytes as well.
48  */
49 #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN       32
50
51 /**
52  * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
53  *
54  * @pktslots: dynamic allocated array for ordering AMPDU packets.
55  * @flow_id: AMPDU flow identifier.
56  * @cur_idx: last AMPDU index from firmware.
57  * @exp_idx: expected next AMPDU index.
58  * @max_idx: maximum amount of packets per AMPDU.
59  * @pend_pkts: number of packets currently in @pktslots.
60  */
61 struct brcmf_ampdu_rx_reorder {
62         struct sk_buff **pktslots;
63         u8 flow_id;
64         u8 cur_idx;
65         u8 exp_idx;
66         u8 max_idx;
67         u8 pend_pkts;
68 };
69
70 /* Forward decls for struct brcmf_pub (see below) */
71 struct brcmf_proto;     /* device communication protocol info */
72 struct brcmf_cfg80211_dev; /* cfg80211 device info */
73 struct brcmf_fws_info; /* firmware signalling info */
74
75 /*
76  * struct brcmf_rev_info
77  *
78  * The result field stores the error code of the
79  * revision info request from firmware. For the
80  * other fields see struct brcmf_rev_info_le in
81  * fwil_types.h
82  */
83 struct brcmf_rev_info {
84         int result;
85         u32 vendorid;
86         u32 deviceid;
87         u32 radiorev;
88         u32 chiprev;
89         u32 corerev;
90         u32 boardid;
91         u32 boardvendor;
92         u32 boardrev;
93         u32 driverrev;
94         u32 ucoderev;
95         u32 bus;
96         u32 chipnum;
97         u32 phytype;
98         u32 phyrev;
99         u32 anarev;
100         u32 chippkg;
101         u32 nvramrev;
102 };
103
104 /* Common structure for module and instance linkage */
105 struct brcmf_pub {
106         /* Linkage ponters */
107         struct brcmf_bus *bus_if;
108         struct brcmf_proto *proto;
109         struct brcmf_cfg80211_info *config;
110
111         /* Internal brcmf items */
112         uint hdrlen;            /* Total BRCMF header length (proto + bus) */
113         uint rxsz;              /* Rx buffer size bus module should use */
114
115         /* Dongle media info */
116         char fwver[BRCMF_DRIVER_FIRMWARE_VERSION_LEN];
117         u8 mac[ETH_ALEN];               /* MAC address obtained from dongle */
118
119         /* Multicast data packets sent to dongle */
120         unsigned long tx_multicast;
121
122         struct mac_address addresses[BRCMF_MAX_IFS];
123
124         struct brcmf_if *iflist[BRCMF_MAX_IFS];
125         s32 if2bss[BRCMF_MAX_IFS];
126
127         struct mutex proto_block;
128         unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
129
130         struct brcmf_fweh_info fweh;
131
132         struct brcmf_fws_info *fws;
133
134         struct brcmf_ampdu_rx_reorder
135                 *reorder_flows[BRCMF_AMPDU_RX_REORDER_MAXFLOWS];
136
137         u32 feat_flags;
138         u32 chip_quirks;
139
140         struct brcmf_rev_info revinfo;
141 #ifdef DEBUG
142         struct dentry *dbgfs_dir;
143 #endif
144 };
145
146 /* forward declarations */
147 struct brcmf_cfg80211_vif;
148 struct brcmf_fws_mac_descriptor;
149
150 /**
151  * enum brcmf_netif_stop_reason - reason for stopping netif queue.
152  *
153  * @BRCMF_NETIF_STOP_REASON_FWS_FC:
154  *      netif stopped due to firmware signalling flow control.
155  * @BRCMF_NETIF_STOP_REASON_FLOW:
156  *      netif stopped due to flowring full.
157  * @BRCMF_NETIF_STOP_REASON_DISCONNECTED:
158  *      netif stopped due to not being connected (STA mode).
159  */
160 enum brcmf_netif_stop_reason {
161         BRCMF_NETIF_STOP_REASON_FWS_FC = BIT(0),
162         BRCMF_NETIF_STOP_REASON_FLOW = BIT(1),
163         BRCMF_NETIF_STOP_REASON_DISCONNECTED = BIT(2)
164 };
165
166 /**
167  * struct brcmf_if - interface control information.
168  *
169  * @drvr: points to device related information.
170  * @vif: points to cfg80211 specific interface information.
171  * @ndev: associated network device.
172  * @stats: interface specific network statistics.
173  * @setmacaddr_work: worker object for setting mac address.
174  * @multicast_work: worker object for multicast provisioning.
175  * @fws_desc: interface specific firmware-signalling descriptor.
176  * @ifidx: interface index in device firmware.
177  * @bssidx: index of bss associated with this interface.
178  * @mac_addr: assigned mac address.
179  * @netif_stop: bitmap indicates reason why netif queues are stopped.
180  * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
181  * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
182  * @pend_8021x_wait: used for signalling change in count.
183  */
184 struct brcmf_if {
185         struct brcmf_pub *drvr;
186         struct brcmf_cfg80211_vif *vif;
187         struct net_device *ndev;
188         struct net_device_stats stats;
189         struct work_struct setmacaddr_work;
190         struct work_struct multicast_work;
191         struct brcmf_fws_mac_descriptor *fws_desc;
192         int ifidx;
193         s32 bssidx;
194         u8 mac_addr[ETH_ALEN];
195         u8 netif_stop;
196         spinlock_t netif_stop_lock;
197         atomic_t pend_8021x_cnt;
198         wait_queue_head_t pend_8021x_wait;
199 };
200
201 struct brcmf_skb_reorder_data {
202         u8 *reorder;
203 };
204
205 int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
206
207 /* Return pointer to interface name */
208 char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
209 struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
210 int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
211 struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
212                               bool is_p2pdev, char *name, u8 *mac_addr);
213 void brcmf_remove_interface(struct brcmf_if *ifp);
214 int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr);
215 void brcmf_txflowblock_if(struct brcmf_if *ifp,
216                           enum brcmf_netif_stop_reason reason, bool state);
217 void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
218 void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
219 void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
220
221 #endif /* BRCMFMAC_CORE_H */