drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2009-2012  Realtek Corporation.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * wlanfae <wlanfae@realtek.com>
  23  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  24  * Hsinchu 300, Taiwan.
  25  *
  26  * Larry Finger <Larry.Finger@lwfinger.net>
  27  *
  28  *****************************************************************************/
  29
  30 #include "../wifi.h"
  31 #include "../efuse.h"
  32 #include "../base.h"
  33 #include "../regd.h"
  34 #include "../cam.h"
  35 #include "../ps.h"
  36 #include "../pci.h"
  37 #include "reg.h"
  38 #include "def.h"
  39 #include "phy.h"
  40 #include "dm.h"
  41 #include "fw.h"
  42 #include "led.h"
  43 #include "hw.h"
  44
  45 void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
  46 {
  47         struct rtl_priv *rtlpriv = rtl_priv(hw);
  48         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
  49         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  50
  51         switch (variable) {
  52         case HW_VAR_RCR: {
  53                         *((u32 *) (val)) = rtlpci->receive_config;
  54                         break;
  55                 }
  56         case HW_VAR_RF_STATE: {
  57                         *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
  58                         break;
  59                 }
  60         case HW_VAR_FW_PSMODE_STATUS: {
  61                         *((bool *) (val)) = ppsc->fw_current_inpsmode;
  62                         break;
  63                 }
  64         case HW_VAR_CORRECT_TSF: {
  65                         u64 tsf;
  66                         u32 *ptsf_low = (u32 *)&tsf;
  67                         u32 *ptsf_high = ((u32 *)&tsf) + 1;
  68
  69                         *ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4));
  70                         *ptsf_low = rtl_read_dword(rtlpriv, TSFR);
  71
  72                         *((u64 *) (val)) = tsf;
  73
  74                         break;
  75                 }
  76         case HW_VAR_MRC: {
  77                         *((bool *)(val)) = rtlpriv->dm.current_mrc_switch;
  78                         break;
  79                 }
  80         default: {
  81                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
  82                          "switch case not processed\n");
  83                         break;
  84                 }
  85         }
  86 }
  87
  88 void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
  89 {
  90         struct rtl_priv *rtlpriv = rtl_priv(hw);
  91         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  92         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
  93         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
  94         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
  95         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
  96
  97         switch (variable) {
  98         case HW_VAR_ETHER_ADDR:{
  99                         rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]);
 100                         rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]);
 101                         break;
 102                 }
 103         case HW_VAR_BASIC_RATE:{
 104                         u16 rate_cfg = ((u16 *) val)[0];
 105                         u8 rate_index = 0;
 106
 107                         if (rtlhal->version == VERSION_8192S_ACUT)
 108                                 rate_cfg = rate_cfg & 0x150;
 109                         else
 110                                 rate_cfg = rate_cfg & 0x15f;
 111
 112                         rate_cfg |= 0x01;
 113
 114                         rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff);
 115                         rtl_write_byte(rtlpriv, RRSR + 1,
 116                                        (rate_cfg >> 8) & 0xff);
 117
 118                         while (rate_cfg > 0x1) {
 119                                 rate_cfg = (rate_cfg >> 1);
 120                                 rate_index++;
 121                         }
 122                         rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index);
 123
 124                         break;
 125                 }
 126         case HW_VAR_BSSID:{
 127                         rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]);
 128                         rtl_write_word(rtlpriv, BSSIDR + 4,
 129                                        ((u16 *)(val + 4))[0]);
 130                         break;
 131                 }
 132         case HW_VAR_SIFS:{
 133                         rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]);
 134                         rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]);
 135                         break;
 136                 }
 137         case HW_VAR_SLOT_TIME:{
 138                         u8 e_aci;
 139
 140                         RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 141                                  "HW_VAR_SLOT_TIME %x\n", val[0]);
 142
 143                         rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
 144
 145                         for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
 146                                 rtlpriv->cfg->ops->set_hw_reg(hw,
 147                                                 HW_VAR_AC_PARAM,
 148                                                 (&e_aci));
 149                         }
 150                         break;
 151                 }
 152         case HW_VAR_ACK_PREAMBLE:{
 153                         u8 reg_tmp;
 154                         u8 short_preamble = (bool) (*val);
 155                         reg_tmp = (mac->cur_40_prime_sc) << 5;
 156                         if (short_preamble)
 157                                 reg_tmp |= 0x80;
 158
 159                         rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp);
 160                         break;
 161                 }
 162         case HW_VAR_AMPDU_MIN_SPACE:{
 163                         u8 min_spacing_to_set;
 164                         u8 sec_min_space;
 165
 166                         min_spacing_to_set = *val;
 167                         if (min_spacing_to_set <= 7) {
 168                                 if (rtlpriv->sec.pairwise_enc_algorithm ==
 169                                     NO_ENCRYPTION)
 170                                         sec_min_space = 0;
 171                                 else
 172                                         sec_min_space = 1;
 173
 174                                 if (min_spacing_to_set < sec_min_space)
 175                                         min_spacing_to_set = sec_min_space;
 176                                 if (min_spacing_to_set > 5)
 177                                         min_spacing_to_set = 5;
 178
 179                                 mac->min_space_cfg =
 180                                                 ((mac->min_space_cfg & 0xf8) |
 181                                                 min_spacing_to_set);
 182
 183                                 *val = min_spacing_to_set;
 184
 185                                 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 186                                          "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
 187                                          mac->min_space_cfg);
 188
 189                                 rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
 190                                                mac->min_space_cfg);
 191                         }
 192                         break;
 193                 }
 194         case HW_VAR_SHORTGI_DENSITY:{
 195                         u8 density_to_set;
 196
 197                         density_to_set = *val;
 198                         mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
 199                         mac->min_space_cfg |= (density_to_set << 3);
 200
 201                         RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 202                                  "Set HW_VAR_SHORTGI_DENSITY: %#x\n",
 203                                  mac->min_space_cfg);
 204
 205                         rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
 206                                        mac->min_space_cfg);
 207
 208                         break;
 209                 }
 210         case HW_VAR_AMPDU_FACTOR:{
 211                         u8 factor_toset;
 212                         u8 regtoset;
 213                         u8 factorlevel[18] = {
 214                                 2, 4, 4, 7, 7, 13, 13,
 215                                 13, 2, 7, 7, 13, 13,
 216                                 15, 15, 15, 15, 0};
 217                         u8 index = 0;
 218
 219                         factor_toset = *val;
 220                         if (factor_toset <= 3) {
 221                                 factor_toset = (1 << (factor_toset + 2));
 222                                 if (factor_toset > 0xf)
 223                                         factor_toset = 0xf;
 224
 225                                 for (index = 0; index < 17; index++) {
 226                                         if (factorlevel[index] > factor_toset)
 227                                                 factorlevel[index] =
 228                                                                  factor_toset;
 229                                 }
 230
 231                                 for (index = 0; index < 8; index++) {
 232                                         regtoset = ((factorlevel[index * 2]) |
 233                                                     (factorlevel[index *
 234                                                     2 + 1] << 4));
 235                                         rtl_write_byte(rtlpriv,
 236                                                        AGGLEN_LMT_L + index,
 237                                                        regtoset);
 238                                 }
 239
 240                                 regtoset = ((factorlevel[16]) |
 241                                             (factorlevel[17] << 4));
 242                                 rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
 243
 244                                 RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 245                                          "Set HW_VAR_AMPDU_FACTOR: %#x\n",
 246                                          factor_toset);
 247                         }
 248                         break;
 249                 }
 250         case HW_VAR_AC_PARAM:{
 251                         u8 e_aci = *val;
 252                         rtl92s_dm_init_edca_turbo(hw);
 253
 254                         if (rtlpci->acm_method != EACMWAY2_SW)
 255                                 rtlpriv->cfg->ops->set_hw_reg(hw,
 256                                                  HW_VAR_ACM_CTRL,
 257                                                  &e_aci);
 258                         break;
 259                 }
 260         case HW_VAR_ACM_CTRL:{
 261                         u8 e_aci = *val;
 262                         union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&(
 263                                                         mac->ac[0].aifs));
 264                         u8 acm = p_aci_aifsn->f.acm;
 265                         u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl);
 266
 267                         acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?
 268                                    0x0 : 0x1);
 269
 270                         if (acm) {
 271                                 switch (e_aci) {
 272                                 case AC0_BE:
 273                                         acm_ctrl |= AcmHw_BeqEn;
 274                                         break;
 275                                 case AC2_VI:
 276                                         acm_ctrl |= AcmHw_ViqEn;
 277                                         break;
 278                                 case AC3_VO:
 279                                         acm_ctrl |= AcmHw_VoqEn;
 280                                         break;
 281                                 default:
 282                                         RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 283                                                  "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n",
 284                                                  acm);
 285                                         break;
 286                                 }
 287                         } else {
 288                                 switch (e_aci) {
 289                                 case AC0_BE:
 290                                         acm_ctrl &= (~AcmHw_BeqEn);
 291                                         break;
 292                                 case AC2_VI:
 293                                         acm_ctrl &= (~AcmHw_ViqEn);
 294                                         break;
 295                                 case AC3_VO:
 296                                         acm_ctrl &= (~AcmHw_VoqEn);
 297                                         break;
 298                                 default:
 299                                         RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 300                                                  "switch case not processed\n");
 301                                         break;
 302                                 }
 303                         }
 304
 305                         RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
 306                                  "HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl);
 307                         rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
 308                         break;
 309                 }
 310         case HW_VAR_RCR:{
 311                         rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]);
 312                         rtlpci->receive_config = ((u32 *) (val))[0];
 313                         break;
 314                 }
 315         case HW_VAR_RETRY_LIMIT:{
 316                         u8 retry_limit = val[0];
 317
 318                         rtl_write_word(rtlpriv, RETRY_LIMIT,
 319                                        retry_limit << RETRY_LIMIT_SHORT_SHIFT |
 320                                        retry_limit << RETRY_LIMIT_LONG_SHIFT);
 321                         break;
 322                 }
 323         case HW_VAR_DUAL_TSF_RST: {
 324                         break;
 325                 }
 326         case HW_VAR_EFUSE_BYTES: {
 327                         rtlefuse->efuse_usedbytes = *((u16 *) val);
 328                         break;
 329                 }
 330         case HW_VAR_EFUSE_USAGE: {
 331                         rtlefuse->efuse_usedpercentage = *val;
 332                         break;
 333                 }
 334         case HW_VAR_IO_CMD: {
 335                         break;
 336                 }
 337         case HW_VAR_WPA_CONFIG: {
 338                         rtl_write_byte(rtlpriv, REG_SECR, *val);
 339                         break;
 340                 }
 341         case HW_VAR_SET_RPWM:{
 342                         break;
 343                 }
 344         case HW_VAR_H2C_FW_PWRMODE:{
 345                         break;
 346                 }
 347         case HW_VAR_FW_PSMODE_STATUS: {
 348                         ppsc->fw_current_inpsmode = *((bool *) val);
 349                         break;
 350                 }
 351         case HW_VAR_H2C_FW_JOINBSSRPT:{
 352                         break;
 353                 }
 354         case HW_VAR_AID:{
 355                         break;
 356                 }
 357         case HW_VAR_CORRECT_TSF:{
 358                         break;
 359                 }
 360         case HW_VAR_MRC: {
 361                         bool bmrc_toset = *((bool *)val);
 362                         u8 u1bdata = 0;
 363
 364                         if (bmrc_toset) {
 365                                 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
 366                                               MASKBYTE0, 0x33);
 367                                 u1bdata = (u8)rtl_get_bbreg(hw,
 368                                                 ROFDM1_TRXPATHENABLE,
 369                                                 MASKBYTE0);
 370                                 rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
 371                                               MASKBYTE0,
 372                                               ((u1bdata & 0xf0) | 0x03));
 373                                 u1bdata = (u8)rtl_get_bbreg(hw,
 374                                                 ROFDM0_TRXPATHENABLE,
 375                                                 MASKBYTE1);
 376                                 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
 377                                               MASKBYTE1,
 378                                               (u1bdata | 0x04));
 379
 380                                 /* Update current settings. */
 381                                 rtlpriv->dm.current_mrc_switch = bmrc_toset;
 382                         } else {
 383                                 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
 384                                               MASKBYTE0, 0x13);
 385                                 u1bdata = (u8)rtl_get_bbreg(hw,
 386                                                  ROFDM1_TRXPATHENABLE,
 387                                                  MASKBYTE0);
 388                                 rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
 389                                               MASKBYTE0,
 390                                               ((u1bdata & 0xf0) | 0x01));
 391                                 u1bdata = (u8)rtl_get_bbreg(hw,
 392                                                 ROFDM0_TRXPATHENABLE,
 393                                                 MASKBYTE1);
 394                                 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
 395                                               MASKBYTE1, (u1bdata & 0xfb));
 396
 397                                 /* Update current settings. */
 398                                 rtlpriv->dm.current_mrc_switch = bmrc_toset;
 399                         }
 400
 401                         break;
 402                 }
 403         case HW_VAR_FW_LPS_ACTION: {
 404                 bool enter_fwlps = *((bool *)val);
 405                 u8 rpwm_val, fw_pwrmode;
 406                 bool fw_current_inps;
 407
 408                 if (enter_fwlps) {
 409                         rpwm_val = 0x02;        /* RF off */
 410                         fw_current_inps = true;
 411                         rtlpriv->cfg->ops->set_hw_reg(hw,
 412                                         HW_VAR_FW_PSMODE_STATUS,
 413                                         (u8 *)(&fw_current_inps));
 414                         rtlpriv->cfg->ops->set_hw_reg(hw,
 415                                         HW_VAR_H2C_FW_PWRMODE,
 416                                         &ppsc->fwctrl_psmode);
 417
 418                         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
 419                                                       &rpwm_val);
 420                 } else {
 421                         rpwm_val = 0x0C;        /* RF on */
 422                         fw_pwrmode = FW_PS_ACTIVE_MODE;
 423                         fw_current_inps = false;
 424                         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
 425                                                       &rpwm_val);
 426                         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
 427                                                       &fw_pwrmode);
 428
 429                         rtlpriv->cfg->ops->set_hw_reg(hw,
 430                                         HW_VAR_FW_PSMODE_STATUS,
 431                                         (u8 *)(&fw_current_inps));
 432                 }
 433                 break; }
 434         default:
 435                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 436                          "switch case not processed\n");
 437                 break;
 438         }
 439
 440 }
 441
 442 void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
 443 {
 444         struct rtl_priv *rtlpriv = rtl_priv(hw);
 445         u8 sec_reg_value = 0x0;
 446
 447         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 448                  "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
 449                  rtlpriv->sec.pairwise_enc_algorithm,
 450                  rtlpriv->sec.group_enc_algorithm);
 451
 452         if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
 453                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
 454                          "not open hw encryption\n");
 455                 return;
 456         }
 457
 458         sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
 459
 460         if (rtlpriv->sec.use_defaultkey) {
 461                 sec_reg_value |= SCR_TXUSEDK;
 462                 sec_reg_value |= SCR_RXUSEDK;
 463         }
 464
 465         RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n",
 466                  sec_reg_value);
 467
 468         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
 469
 470 }
 471
 472 static u8 _rtl92se_halset_sysclk(struct ieee80211_hw *hw, u8 data)
 473 {
 474         struct rtl_priv *rtlpriv = rtl_priv(hw);
 475         u8 waitcount = 100;
 476         bool bresult = false;
 477         u8 tmpvalue;
 478
 479         rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
 480
 481         /* Wait the MAC synchronized. */
 482         udelay(400);
 483
 484         /* Check if it is set ready. */
 485         tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
 486         bresult = ((tmpvalue & BIT(7)) == (data & BIT(7)));
 487
 488         if ((data & (BIT(6) | BIT(7))) == false) {
 489                 waitcount = 100;
 490                 tmpvalue = 0;
 491
 492                 while (1) {
 493                         waitcount--;
 494
 495                         tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
 496                         if ((tmpvalue & BIT(6)))
 497                                 break;
 498
 499                         pr_err("wait for BIT(6) return value %x\n", tmpvalue);
 500                         if (waitcount == 0)
 501                                 break;
 502
 503                         udelay(10);
 504                 }
 505
 506                 if (waitcount == 0)
 507                         bresult = false;
 508                 else
 509                         bresult = true;
 510         }
 511
 512         return bresult;
 513 }
 514
 515 void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw)
 516 {
 517         struct rtl_priv *rtlpriv = rtl_priv(hw);
 518         u8 u1tmp;
 519
 520         /* The following config GPIO function */
 521         rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
 522         u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
 523
 524         /* config GPIO3 to input */
 525         u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
 526         rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
 527
 528 }
 529
 530 static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw)
 531 {
 532         struct rtl_priv *rtlpriv = rtl_priv(hw);
 533         u8 u1tmp;
 534         u8 retval = ERFON;
 535
 536         /* The following config GPIO function */
 537         rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
 538         u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
 539
 540         /* config GPIO3 to input */
 541         u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
 542         rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
 543
 544         /* On some of the platform, driver cannot read correct
 545          * value without delay between Write_GPIO_SEL and Read_GPIO_IN */
 546         mdelay(10);
 547
 548         /* check GPIO3 */
 549         u1tmp = rtl_read_byte(rtlpriv, GPIO_IN_SE);
 550         retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF;
 551
 552         return retval;
 553 }
 554
 555 static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
 556 {
 557         struct rtl_priv *rtlpriv = rtl_priv(hw);
 558         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 559         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 560
 561         u8 i;
 562         u8 tmpu1b;
 563         u16 tmpu2b;
 564         u8 pollingcnt = 20;
 565
 566         if (rtlpci->first_init) {
 567                 /* Reset PCIE Digital */
 568                 tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
 569                 tmpu1b &= 0xFE;
 570                 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
 571                 udelay(1);
 572                 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0));
 573         }
 574
 575         /* Switch to SW IO control */
 576         tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
 577         if (tmpu1b & BIT(7)) {
 578                 tmpu1b &= ~(BIT(6) | BIT(7));
 579
 580                 /* Set failed, return to prevent hang. */
 581                 if (!_rtl92se_halset_sysclk(hw, tmpu1b))
 582                         return;
 583         }
 584
 585         rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
 586         udelay(50);
 587         rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
 588         udelay(50);
 589
 590         /* Clear FW RPWM for FW control LPS.*/
 591         rtl_write_byte(rtlpriv, RPWM, 0x0);
 592
 593         /* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */
 594         tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
 595         tmpu1b &= 0x73;
 596         rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
 597         /* wait for BIT 10/11/15 to pull high automatically!! */
 598         mdelay(1);
 599
 600         rtl_write_byte(rtlpriv, CMDR, 0);
 601         rtl_write_byte(rtlpriv, TCR, 0);
 602
 603         /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
 604         tmpu1b = rtl_read_byte(rtlpriv, 0x562);
 605         tmpu1b |= 0x08;
 606         rtl_write_byte(rtlpriv, 0x562, tmpu1b);
 607         tmpu1b &= ~(BIT(3));
 608         rtl_write_byte(rtlpriv, 0x562, tmpu1b);
 609
 610         /* Enable AFE clock source */
 611         tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
 612         rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
 613         /* Delay 1.5ms */
 614         mdelay(2);
 615         tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
 616         rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
 617
 618         /* Enable AFE Macro Block's Bandgap */
 619         tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
 620         rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
 621         mdelay(1);
 622
 623         /* Enable AFE Mbias */
 624         tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
 625         rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
 626         mdelay(1);
 627
 628         /* Enable LDOA15 block  */
 629         tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
 630         rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
 631
 632         /* Set Digital Vdd to Retention isolation Path. */
 633         tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
 634         rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
 635
 636         /* For warm reboot NIC disappera bug. */
 637         tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
 638         rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
 639
 640         rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
 641
 642         /* Enable AFE PLL Macro Block */
 643         /* We need to delay 100u before enabling PLL. */
 644         udelay(200);
 645         tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
 646         rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
 647
 648         /* for divider reset  */
 649         udelay(100);
 650         rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) |
 651                        BIT(4) | BIT(6)));
 652         udelay(10);
 653         rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
 654         udelay(10);
 655
 656         /* Enable MAC 80MHZ clock  */
 657         tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
 658         rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
 659         mdelay(1);
 660
 661         /* Release isolation AFE PLL & MD */
 662         rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
 663
 664         /* Enable MAC clock */
 665         tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
 666         rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
 667
 668         /* Enable Core digital and enable IOREG R/W */
 669         tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
 670         rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
 671
 672         tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
 673         rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7)));
 674
 675         /* enable REG_EN */
 676         rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
 677
 678         /* Switch the control path. */
 679         tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
 680         rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
 681
 682         tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
 683         tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
 684         if (!_rtl92se_halset_sysclk(hw, tmpu1b))
 685                 return; /* Set failed, return to prevent hang. */
 686
 687         rtl_write_word(rtlpriv, CMDR, 0x07FC);
 688
 689         /* MH We must enable the section of code to prevent load IMEM fail. */
 690         /* Load MAC register from WMAc temporarily We simulate macreg. */
 691         /* txt HW will provide MAC txt later  */
 692         rtl_write_byte(rtlpriv, 0x6, 0x30);
 693         rtl_write_byte(rtlpriv, 0x49, 0xf0);
 694
 695         rtl_write_byte(rtlpriv, 0x4b, 0x81);
 696
 697         rtl_write_byte(rtlpriv, 0xb5, 0x21);
 698
 699         rtl_write_byte(rtlpriv, 0xdc, 0xff);
 700         rtl_write_byte(rtlpriv, 0xdd, 0xff);
 701         rtl_write_byte(rtlpriv, 0xde, 0xff);
 702         rtl_write_byte(rtlpriv, 0xdf, 0xff);
 703
 704         rtl_write_byte(rtlpriv, 0x11a, 0x00);
 705         rtl_write_byte(rtlpriv, 0x11b, 0x00);
 706
 707         for (i = 0; i < 32; i++)
 708                 rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b);
 709
 710         rtl_write_byte(rtlpriv, 0x236, 0xff);
 711
 712         rtl_write_byte(rtlpriv, 0x503, 0x22);
 713
 714         if (ppsc->support_aspm && !ppsc->support_backdoor)
 715                 rtl_write_byte(rtlpriv, 0x560, 0x40);
 716         else
 717                 rtl_write_byte(rtlpriv, 0x560, 0x00);
 718
 719         rtl_write_byte(rtlpriv, DBG_PORT, 0x91);
 720
 721         /* Set RX Desc Address */
 722         rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
 723         rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma);
 724
 725         /* Set TX Desc Address */
 726         rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma);
 727         rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma);
 728         rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma);
 729         rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma);
 730         rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma);
 731         rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma);
 732         rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma);
 733         rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma);
 734         rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma);
 735
 736         rtl_write_word(rtlpriv, CMDR, 0x37FC);
 737
 738         /* To make sure that TxDMA can ready to download FW. */
 739         /* We should reset TxDMA if IMEM RPT was not ready. */
 740         do {
 741                 tmpu1b = rtl_read_byte(rtlpriv, TCR);
 742                 if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
 743                         break;
 744
 745                 udelay(5);
 746         } while (pollingcnt--);
 747
 748         if (pollingcnt <= 0) {
 749                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 750                          "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
 751                          tmpu1b);
 752                 tmpu1b = rtl_read_byte(rtlpriv, CMDR);
 753                 rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
 754                 udelay(2);
 755                 /* Reset TxDMA */
 756                 rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN);
 757         }
 758
 759         /* After MACIO reset,we must refresh LED state. */
 760         if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) ||
 761            (ppsc->rfoff_reason == 0)) {
 762                 struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
 763                 struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
 764                 enum rf_pwrstate rfpwr_state_toset;
 765                 rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw);
 766
 767                 if (rfpwr_state_toset == ERFON)
 768                         rtl92se_sw_led_on(hw, pLed0);
 769         }
 770 }
 771
 772 static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw)
 773 {
 774         struct rtl_priv *rtlpriv = rtl_priv(hw);
 775         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 776         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 777         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 778         u8 i;
 779         u16 tmpu2b;
 780
 781         /* 1. System Configure Register (Offset: 0x0000 - 0x003F) */
 782
 783         /* 2. Command Control Register (Offset: 0x0040 - 0x004F) */
 784         /* Turn on 0x40 Command register */
 785         rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN |
 786                         SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN |
 787                         RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN));
 788
 789         /* Set TCR TX DMA pre 2 FULL enable bit */
 790         rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) |
 791                         TXDMAPRE2FULL);
 792
 793         /* Set RCR      */
 794         rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
 795
 796         /* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */
 797
 798         /* 4. Timing Control Register  (Offset: 0x0080 - 0x009F) */
 799         /* Set CCK/OFDM SIFS */
 800         /* CCK SIFS shall always be 10us. */
 801         rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a);
 802         rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010);
 803
 804         /* Set AckTimeout */
 805         rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40);
 806
 807         /* Beacon related */
 808         rtl_write_word(rtlpriv, BCN_INTERVAL, 100);
 809         rtl_write_word(rtlpriv, ATIMWND, 2);
 810
 811         /* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */
 812         /* 5.1 Initialize Number of Reserved Pages in Firmware Queue */
 813         /* Firmware allocate now, associate with FW internal setting.!!! */
 814
 815         /* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */
 816         /* 5.3 Set driver info, we only accept PHY status now. */
 817         /* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO  */
 818         rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6));
 819
 820         /* 6. Adaptive Control Register  (Offset: 0x0160 - 0x01CF) */
 821         /* Set RRSR to all legacy rate and HT rate
 822          * CCK rate is supported by default.
 823          * CCK rate will be filtered out only when associated
 824          * AP does not support it.
 825          * Only enable ACK rate to OFDM 24M
 826          * Disable RRSR for CCK rate in A-Cut   */
 827
 828         if (rtlhal->version == VERSION_8192S_ACUT)
 829                 rtl_write_byte(rtlpriv, RRSR, 0xf0);
 830         else if (rtlhal->version == VERSION_8192S_BCUT)
 831                 rtl_write_byte(rtlpriv, RRSR, 0xff);
 832         rtl_write_byte(rtlpriv, RRSR + 1, 0x01);
 833         rtl_write_byte(rtlpriv, RRSR + 2, 0x00);
 834
 835         /* A-Cut IC do not support CCK rate. We forbid ARFR to */
 836         /* fallback to CCK rate */
 837         for (i = 0; i < 8; i++) {
 838                 /*Disable RRSR for CCK rate in A-Cut */
 839                 if (rtlhal->version == VERSION_8192S_ACUT)
 840                         rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0);
 841         }
 842
 843         /* Different rate use different AMPDU size */
 844         /* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */
 845         rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f);
 846         /* MCS0/1/2/3 use max AMPDU size 4*2=8K */
 847         rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442);
 848         /* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */
 849         rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7);
 850         /* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */
 851         rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772);
 852         /* MCS12/13/14/15 use max AMPDU size 15*2=30K */
 853         rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd);
 854
 855         /* Set Data / Response auto rate fallack retry count */
 856         rtl_write_dword(rtlpriv, DARFRC, 0x04010000);
 857         rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605);
 858         rtl_write_dword(rtlpriv, RARFRC, 0x04010000);
 859         rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605);
 860
 861         /* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */
 862         /* Set all rate to support SG */
 863         rtl_write_word(rtlpriv, SG_RATE, 0xFFFF);
 864
 865         /* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */
 866         /* Set NAV protection length */
 867         rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080);
 868         /* CF-END Threshold */
 869         rtl_write_byte(rtlpriv, CFEND_TH, 0xFF);
 870         /* Set AMPDU minimum space */
 871         rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07);
 872         /* Set TXOP stall control for several queue/HI/BCN/MGT/ */
 873         rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00);
 874
 875         /* 9. Security Control Register (Offset: 0x0240 - 0x025F) */
 876         /* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */
 877         /* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */
 878         /* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */
 879         /* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */
 880
 881         /* 14. Set driver info, we only accept PHY status now. */
 882         rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4);
 883
 884         /* 15. For EEPROM R/W Workaround */
 885         /* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */
 886         tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN);
 887         rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13));
 888         tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
 889         rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8)));
 890
 891         /* 17. For EFUSE */
 892         /* We may R/W EFUSE in EEPROM mode */
 893         if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
 894                 u8      tempval;
 895
 896                 tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
 897                 tempval &= 0xFE;
 898                 rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval);
 899
 900                 /* Change Program timing */
 901                 rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
 902                 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "EFUSE CONFIG OK\n");
 903         }
 904
 905         RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "OK\n");
 906
 907 }
 908
 909 static void _rtl92se_hw_configure(struct ieee80211_hw *hw)
 910 {
 911         struct rtl_priv *rtlpriv = rtl_priv(hw);
 912         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 913         struct rtl_phy *rtlphy = &(rtlpriv->phy);
 914         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 915
 916         u8 reg_bw_opmode = 0;
 917         u32 reg_rrsr = 0;
 918         u8 regtmp = 0;
 919
 920         reg_bw_opmode = BW_OPMODE_20MHZ;
 921         reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
 922
 923         regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL);
 924         reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp;
 925         rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr);
 926         rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
 927
 928         /* Set Retry Limit here */
 929         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
 930                         (u8 *)(&rtlpci->shortretry_limit));
 931
 932         rtl_write_byte(rtlpriv, MLT, 0x8f);
 933
 934         /* For Min Spacing configuration. */
 935         switch (rtlphy->rf_type) {
 936         case RF_1T2R:
 937         case RF_1T1R:
 938                 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
 939                 break;
 940         case RF_2T2R:
 941         case RF_2T2R_GREEN:
 942                 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
 943                 break;
 944         }
 945         rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg);
 946 }
 947
 948 int rtl92se_hw_init(struct ieee80211_hw *hw)
 949 {
 950         struct rtl_priv *rtlpriv = rtl_priv(hw);
 951         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 952         struct rtl_phy *rtlphy = &(rtlpriv->phy);
 953         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 954         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 955         u8 tmp_byte = 0;
 956         unsigned long flags;
 957         bool rtstatus = true;
 958         u8 tmp_u1b;
 959         int err = false;
 960         u8 i;
 961         int wdcapra_add[] = {
 962                 EDCAPARA_BE, EDCAPARA_BK,
 963                 EDCAPARA_VI, EDCAPARA_VO};
 964         u8 secr_value = 0x0;
 965
 966         rtlpci->being_init_adapter = true;
 967
 968         /* As this function can take a very long time (up to 350 ms)
 969          * and can be called with irqs disabled, reenable the irqs
 970          * to let the other devices continue being serviced.
 971          *
 972          * It is safe doing so since our own interrupts will only be enabled
 973          * in a subsequent step.
 974          */
 975         local_save_flags(flags);
 976         local_irq_enable();
 977
 978         rtlpriv->intf_ops->disable_aspm(hw);
 979
 980         /* 1. MAC Initialize */
 981         /* Before FW download, we have to set some MAC register */
 982         _rtl92se_macconfig_before_fwdownload(hw);
 983
 984         rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
 985                         PMC_FSM) >> 16) & 0xF);
 986
 987         rtl8192se_gpiobit3_cfg_inputmode(hw);
 988
 989         /* 2. download firmware */
 990         rtstatus = rtl92s_download_fw(hw);
 991         if (!rtstatus) {
 992                 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 993                          "Failed to download FW. Init HW without FW now... "
 994                          "Please copy FW into /lib/firmware/rtlwifi\n");
 995                 err = 1;
 996                 goto exit;
 997         }
 998
 999         /* After FW download, we have to reset MAC register */
1000         _rtl92se_macconfig_after_fwdownload(hw);
1001
1002         /*Retrieve default FW Cmd IO map. */
1003         rtlhal->fwcmd_iomap =   rtl_read_word(rtlpriv, LBUS_MON_ADDR);
1004         rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
1005
1006         /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
1007         if (!rtl92s_phy_mac_config(hw)) {
1008                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
1009                 err = rtstatus;
1010                 goto exit;
1011         }
1012
1013         /* because last function modify RCR, so we update
1014          * rcr var here, or TP will unstable for receive_config
1015          * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
1016          * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
1017          */
1018         rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR);
1019         rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
1020         rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
1021
1022         /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
1023         /* We must set flag avoid BB/RF config period later!! */
1024         rtl_write_dword(rtlpriv, CMDR, 0x37FC);
1025
1026         /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
1027         if (!rtl92s_phy_bb_config(hw)) {
1028                 RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
1029                 err = rtstatus;
1030                 goto exit;
1031         }
1032
1033         /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
1034         /* Before initalizing RF. We can not use FW to do RF-R/W. */
1035
1036         rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
1037
1038         /* Before RF-R/W we must execute the IO from Scott's suggestion. */
1039         rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
1040         if (rtlhal->version == VERSION_8192S_ACUT)
1041                 rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07);
1042         else
1043                 rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
1044
1045         if (!rtl92s_phy_rf_config(hw)) {
1046                 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
1047                 err = rtstatus;
1048                 goto exit;
1049         }
1050
1051         /* After read predefined TXT, we must set BB/MAC/RF
1052          * register as our requirement */
1053
1054         rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
1055                                                            (enum radio_path)0,
1056                                                            RF_CHNLBW,
1057                                                            RFREG_OFFSET_MASK);
1058         rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
1059                                                            (enum radio_path)1,
1060                                                            RF_CHNLBW,
1061                                                            RFREG_OFFSET_MASK);
1062
1063         /*---- Set CCK and OFDM Block "ON"----*/
1064         rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
1065         rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
1066
1067         /*3 Set Hardware(Do nothing now) */
1068         _rtl92se_hw_configure(hw);
1069
1070         /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
1071         /* TX power index for different rate set. */
1072         /* Get original hw reg values */
1073         rtl92s_phy_get_hw_reg_originalvalue(hw);
1074         /* Write correct tx power index */
1075         rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
1076
1077         /* We must set MAC address after firmware download. */
1078         for (i = 0; i < 6; i++)
1079                 rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
1080
1081         /* EEPROM R/W workaround */
1082         tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG);
1083         rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3)));
1084
1085         rtl_write_byte(rtlpriv, 0x4d, 0x0);
1086
1087         if (hal_get_firmwareversion(rtlpriv) >= 0x49) {
1088                 tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4));
1089                 tmp_byte = tmp_byte | BIT(5);
1090                 rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte);
1091                 rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF);
1092         }
1093
1094         /* We enable high power and RA related mechanism after NIC
1095          * initialized. */
1096         if (hal_get_firmwareversion(rtlpriv) >= 0x35) {
1097                 /* Fw v.53 and later. */
1098                 rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
1099         } else if (hal_get_firmwareversion(rtlpriv) == 0x34) {
1100                 /* Fw v.52. */
1101                 rtl_write_dword(rtlpriv, WFM5, FW_RA_INIT);
1102                 rtl92s_phy_chk_fwcmd_iodone(hw);
1103         } else {
1104                 /* Compatible earlier FW version. */
1105                 rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
1106                 rtl92s_phy_chk_fwcmd_iodone(hw);
1107                 rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
1108                 rtl92s_phy_chk_fwcmd_iodone(hw);
1109                 rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
1110                 rtl92s_phy_chk_fwcmd_iodone(hw);
1111         }
1112
1113         /* Add to prevent ASPM bug. */
1114         /* Always enable hst and NIC clock request. */
1115         rtl92s_phy_switch_ephy_parameter(hw);
1116
1117         /* Security related
1118          * 1. Clear all H/W keys.
1119          * 2. Enable H/W encryption/decryption. */
1120         rtl_cam_reset_all_entry(hw);
1121         secr_value |= SCR_TXENCENABLE;
1122         secr_value |= SCR_RXENCENABLE;
1123         secr_value |= SCR_NOSKMC;
1124         rtl_write_byte(rtlpriv, REG_SECR, secr_value);
1125
1126         for (i = 0; i < 4; i++)
1127                 rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
1128
1129         if (rtlphy->rf_type == RF_1T2R) {
1130                 bool mrc2set = true;
1131                 /* Turn on B-Path */
1132                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
1133         }
1134
1135         rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
1136         rtl92s_dm_init(hw);
1137 exit:
1138         local_irq_restore(flags);
1139         rtlpci->being_init_adapter = false;
1140         return err;
1141 }
1142
1143 void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr)
1144 {
1145         /* This is a stub. */
1146 }
1147
1148 void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
1149 {
1150         struct rtl_priv *rtlpriv = rtl_priv(hw);
1151         u32 reg_rcr;
1152
1153         if (rtlpriv->psc.rfpwr_state != ERFON)
1154                 return;
1155
1156         rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1157
1158         if (check_bssid) {
1159                 reg_rcr |= (RCR_CBSSID);
1160                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1161         } else if (!check_bssid) {
1162                 reg_rcr &= (~RCR_CBSSID);
1163                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1164         }
1165
1166 }
1167
1168 static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
1169                                      enum nl80211_iftype type)
1170 {
1171         struct rtl_priv *rtlpriv = rtl_priv(hw);
1172         u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
1173         u32 temp;
1174         bt_msr &= ~MSR_LINK_MASK;
1175
1176         switch (type) {
1177         case NL80211_IFTYPE_UNSPECIFIED:
1178                 bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
1179                 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1180                          "Set Network type to NO LINK!\n");
1181                 break;
1182         case NL80211_IFTYPE_ADHOC:
1183                 bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
1184                 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1185                          "Set Network type to Ad Hoc!\n");
1186                 break;
1187         case NL80211_IFTYPE_STATION:
1188                 bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
1189                 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1190                          "Set Network type to STA!\n");
1191                 break;
1192         case NL80211_IFTYPE_AP:
1193                 bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
1194                 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1195                          "Set Network type to AP!\n");
1196                 break;
1197         default:
1198                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1199                          "Network type %d not supported!\n", type);
1200                 return 1;
1201
1202         }
1203
1204         if (type != NL80211_IFTYPE_AP &&
1205             rtlpriv->mac80211.link_state < MAC80211_LINKED)
1206                 bt_msr = rtl_read_byte(rtlpriv, MSR) & ~MSR_LINK_MASK;
1207         rtl_write_byte(rtlpriv, MSR, bt_msr);
1208
1209         temp = rtl_read_dword(rtlpriv, TCR);
1210         rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8)));
1211         rtl_write_dword(rtlpriv, TCR, temp | BIT(8));
1212
1213
1214         return 0;
1215 }
1216
1217 /* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */
1218 int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
1219 {
1220         struct rtl_priv *rtlpriv = rtl_priv(hw);
1221
1222         if (_rtl92se_set_media_status(hw, type))
1223                 return -EOPNOTSUPP;
1224
1225         if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
1226                 if (type != NL80211_IFTYPE_AP)
1227                         rtl92se_set_check_bssid(hw, true);
1228         } else {
1229                 rtl92se_set_check_bssid(hw, false);
1230         }
1231
1232         return 0;
1233 }
1234
1235 /* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
1236 void rtl92se_set_qos(struct ieee80211_hw *hw, int aci)
1237 {
1238         struct rtl_priv *rtlpriv = rtl_priv(hw);
1239         rtl92s_dm_init_edca_turbo(hw);
1240
1241         switch (aci) {
1242         case AC1_BK:
1243                 rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f);
1244                 break;
1245         case AC0_BE:
1246                 /* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */
1247                 break;
1248         case AC2_VI:
1249                 rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322);
1250                 break;
1251         case AC3_VO:
1252                 rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
1253                 break;
1254         default:
1255                 RT_ASSERT(false, "invalid aci: %d !\n", aci);
1256                 break;
1257         }
1258 }
1259
1260 void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
1261 {
1262         struct rtl_priv *rtlpriv = rtl_priv(hw);
1263         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1264
1265         rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
1266         /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
1267         rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
1268         rtlpci->irq_enabled = true;
1269 }
1270
1271 void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
1272 {
1273         struct rtl_priv *rtlpriv;
1274         struct rtl_pci *rtlpci;
1275
1276         rtlpriv = rtl_priv(hw);
1277         /* if firmware not available, no interrupts */
1278         if (!rtlpriv || !rtlpriv->max_fw_size)
1279                 return;
1280         rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1281         rtl_write_dword(rtlpriv, INTA_MASK, 0);
1282         rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
1283         rtlpci->irq_enabled = false;
1284 }
1285
1286 static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
1287 {
1288         struct rtl_priv *rtlpriv = rtl_priv(hw);
1289         u8 waitcnt = 100;
1290         bool result = false;
1291         u8 tmp;
1292
1293         rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
1294
1295         /* Wait the MAC synchronized. */
1296         udelay(400);
1297
1298         /* Check if it is set ready. */
1299         tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
1300         result = ((tmp & BIT(7)) == (data & BIT(7)));
1301
1302         if ((data & (BIT(6) | BIT(7))) == false) {
1303                 waitcnt = 100;
1304                 tmp = 0;
1305
1306                 while (1) {
1307                         waitcnt--;
1308                         tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
1309
1310                         if ((tmp & BIT(6)))
1311                                 break;
1312
1313                         pr_err("wait for BIT(6) return value %x\n", tmp);
1314
1315                         if (waitcnt == 0)
1316                                 break;
1317                         udelay(10);
1318                 }
1319
1320                 if (waitcnt == 0)
1321                         result = false;
1322                 else
1323                         result = true;
1324         }
1325
1326         return result;
1327 }
1328
1329 static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
1330 {
1331         struct rtl_priv *rtlpriv = rtl_priv(hw);
1332         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1333         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
1334         u8 u1btmp;
1335
1336         if (rtlhal->driver_going2unload)
1337                 rtl_write_byte(rtlpriv, 0x560, 0x0);
1338
1339         /* Power save for BB/RF */
1340         u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
1341         u1btmp |= BIT(0);
1342         rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
1343         rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
1344         rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
1345         rtl_write_word(rtlpriv, CMDR, 0x57FC);
1346         udelay(100);
1347         rtl_write_word(rtlpriv, CMDR, 0x77FC);
1348         rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
1349         udelay(10);
1350         rtl_write_word(rtlpriv, CMDR, 0x37FC);
1351         udelay(10);
1352         rtl_write_word(rtlpriv, CMDR, 0x77FC);
1353         udelay(10);
1354         rtl_write_word(rtlpriv, CMDR, 0x57FC);
1355         rtl_write_word(rtlpriv, CMDR, 0x0000);
1356
1357         if (rtlhal->driver_going2unload) {
1358                 u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1));
1359                 u1btmp &= ~(BIT(0));
1360                 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp);
1361         }
1362
1363         u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
1364
1365         /* Add description. After switch control path. register
1366          * after page1 will be invisible. We can not do any IO
1367          * for register>0x40. After resume&MACIO reset, we need
1368          * to remember previous reg content. */
1369         if (u1btmp & BIT(7)) {
1370                 u1btmp &= ~(BIT(6) | BIT(7));
1371                 if (!_rtl92s_set_sysclk(hw, u1btmp)) {
1372                         pr_err("Switch ctrl path fail\n");
1373                         return;
1374                 }
1375         }
1376
1377         /* Power save for MAC */
1378         if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS  &&
1379                 !rtlhal->driver_going2unload) {
1380                 /* enable LED function */
1381                 rtl_write_byte(rtlpriv, 0x03, 0xF9);
1382         /* SW/HW radio off or halt adapter!! For example S3/S4 */
1383         } else {
1384                 /* LED function disable. Power range is about 8mA now. */
1385                 /* if write 0xF1 disconnet_pci power
1386                  *       ifconfig wlan0 down power are both high 35:70 */
1387                 /* if write oxF9 disconnet_pci power
1388                  * ifconfig wlan0 down power are both low  12:45*/
1389                 rtl_write_byte(rtlpriv, 0x03, 0xF9);
1390         }
1391
1392         rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70);
1393         rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68);
1394         rtl_write_byte(rtlpriv,  AFE_PLL_CTRL, 0x00);
1395         rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
1396         rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E);
1397         RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
1398
1399 }
1400
1401 static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw)
1402 {
1403         struct rtl_priv *rtlpriv = rtl_priv(hw);
1404         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1405         struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
1406         struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
1407
1408         if (rtlpci->up_first_time == 1)
1409                 return;
1410
1411         if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS)
1412                 rtl92se_sw_led_on(hw, pLed0);
1413         else
1414                 rtl92se_sw_led_off(hw, pLed0);
1415 }
1416
1417
1418 static void _rtl92se_power_domain_init(struct ieee80211_hw *hw)
1419 {
1420         struct rtl_priv *rtlpriv = rtl_priv(hw);
1421         u16 tmpu2b;
1422         u8 tmpu1b;
1423
1424         rtlpriv->psc.pwrdomain_protect = true;
1425
1426         tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
1427         if (tmpu1b & BIT(7)) {
1428                 tmpu1b &= ~(BIT(6) | BIT(7));
1429                 if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
1430                         rtlpriv->psc.pwrdomain_protect = false;
1431                         return;
1432                 }
1433         }
1434
1435         rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
1436         rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
1437
1438         /* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */
1439         tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
1440
1441         /* If IPS we need to turn LED on. So we not
1442          * not disable BIT 3/7 of reg3. */
1443         if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW))
1444                 tmpu1b &= 0xFB;
1445         else
1446                 tmpu1b &= 0x73;
1447
1448         rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
1449         /* wait for BIT 10/11/15 to pull high automatically!! */
1450         mdelay(1);
1451
1452         rtl_write_byte(rtlpriv, CMDR, 0);
1453         rtl_write_byte(rtlpriv, TCR, 0);
1454
1455         /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
1456         tmpu1b = rtl_read_byte(rtlpriv, 0x562);
1457         tmpu1b |= 0x08;
1458         rtl_write_byte(rtlpriv, 0x562, tmpu1b);
1459         tmpu1b &= ~(BIT(3));
1460         rtl_write_byte(rtlpriv, 0x562, tmpu1b);
1461
1462         /* Enable AFE clock source */
1463         tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
1464         rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
1465         /* Delay 1.5ms */
1466         udelay(1500);
1467         tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
1468         rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
1469
1470         /* Enable AFE Macro Block's Bandgap */
1471         tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
1472         rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
1473         mdelay(1);
1474
1475         /* Enable AFE Mbias */
1476         tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
1477         rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
1478         mdelay(1);
1479
1480         /* Enable LDOA15 block */
1481         tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
1482         rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
1483
1484         /* Set Digital Vdd to Retention isolation Path. */
1485         tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
1486         rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
1487
1488
1489         /* For warm reboot NIC disappera bug. */
1490         tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
1491         rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
1492
1493         rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
1494
1495         /* Enable AFE PLL Macro Block */
1496         tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
1497         rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
1498         /* Enable MAC 80MHZ clock */
1499         tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
1500         rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
1501         mdelay(1);
1502
1503         /* Release isolation AFE PLL & MD */
1504         rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
1505
1506         /* Enable MAC clock */
1507         tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
1508         rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
1509
1510         /* Enable Core digital and enable IOREG R/W */
1511         tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
1512         rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
1513         /* enable REG_EN */
1514         rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
1515
1516         /* Switch the control path. */
1517         tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
1518         rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
1519
1520         tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
1521         tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
1522         if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
1523                 rtlpriv->psc.pwrdomain_protect = false;
1524                 return;
1525         }
1526
1527         rtl_write_word(rtlpriv, CMDR, 0x37FC);
1528
1529         /* After MACIO reset,we must refresh LED state. */
1530         _rtl92se_gen_refreshledstate(hw);
1531
1532         rtlpriv->psc.pwrdomain_protect = false;
1533 }
1534
1535 void rtl92se_card_disable(struct ieee80211_hw *hw)
1536 {
1537         struct rtl_priv *rtlpriv = rtl_priv(hw);
1538         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1539         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1540         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
1541         enum nl80211_iftype opmode;
1542         u8 wait = 30;
1543
1544         rtlpriv->intf_ops->enable_aspm(hw);
1545
1546         if (rtlpci->driver_is_goingto_unload ||
1547                 ppsc->rfoff_reason > RF_CHANGE_BY_PS)
1548                 rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
1549
1550         /* we should chnge GPIO to input mode
1551          * this will drop away current about 25mA*/
1552         rtl8192se_gpiobit3_cfg_inputmode(hw);
1553
1554         /* this is very important for ips power save */
1555         while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
1556                 if (rtlpriv->psc.pwrdomain_protect)
1557                         mdelay(20);
1558                 else
1559                         break;
1560         }
1561
1562         mac->link_state = MAC80211_NOLINK;
1563         opmode = NL80211_IFTYPE_UNSPECIFIED;
1564         _rtl92se_set_media_status(hw, opmode);
1565
1566         _rtl92s_phy_set_rfhalt(hw);
1567         udelay(100);
1568 }
1569
1570 void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta,
1571                              u32 *p_intb)
1572 {
1573         struct rtl_priv *rtlpriv = rtl_priv(hw);
1574         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1575
1576         *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
1577         rtl_write_dword(rtlpriv, ISR, *p_inta);
1578
1579         *p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1];
1580         rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
1581 }
1582
1583 void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw)
1584 {
1585         struct rtl_priv *rtlpriv = rtl_priv(hw);
1586         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1587         u16 bcntime_cfg = 0;
1588         u16 bcn_cw = 6, bcn_ifs = 0xf;
1589         u16 atim_window = 2;
1590
1591         /* ATIM Window (in unit of TU). */
1592         rtl_write_word(rtlpriv, ATIMWND, atim_window);
1593
1594         /* Beacon interval (in unit of TU). */
1595         rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval);
1596
1597         /* DrvErlyInt (in unit of TU). (Time to send
1598          * interrupt to notify driver to change
1599          * beacon content) */
1600         rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4);
1601
1602         /* BcnDMATIM(in unit of us). Indicates the
1603          * time before TBTT to perform beacon queue DMA  */
1604         rtl_write_word(rtlpriv, BCN_DMATIME, 256);
1605
1606         /* Force beacon frame transmission even
1607          * after receiving beacon frame from
1608          * other ad hoc STA */
1609         rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100);
1610
1611         /* Beacon Time Configuration */
1612         if (mac->opmode == NL80211_IFTYPE_ADHOC)
1613                 bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT);
1614
1615         /* TODO: bcn_ifs may required to be changed on ASIC */
1616         bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS;
1617
1618         /*for beacon changed */
1619         rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval);
1620 }
1621
1622 void rtl92se_set_beacon_interval(struct ieee80211_hw *hw)
1623 {
1624         struct rtl_priv *rtlpriv = rtl_priv(hw);
1625         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1626         u16 bcn_interval = mac->beacon_interval;
1627
1628         /* Beacon interval (in unit of TU). */
1629         rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval);
1630         /* 2008.10.24 added by tynli for beacon changed. */
1631         rtl92s_phy_set_beacon_hwreg(hw, bcn_interval);
1632 }
1633
1634 void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
1635                 u32 add_msr, u32 rm_msr)
1636 {
1637         struct rtl_priv *rtlpriv = rtl_priv(hw);
1638         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1639
1640         RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n",
1641                  add_msr, rm_msr);
1642
1643         if (add_msr)
1644                 rtlpci->irq_mask[0] |= add_msr;
1645
1646         if (rm_msr)
1647                 rtlpci->irq_mask[0] &= (~rm_msr);
1648
1649         rtl92se_disable_interrupt(hw);
1650         rtl92se_enable_interrupt(hw);
1651 }
1652
1653 static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw)
1654 {
1655         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1656         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1657         u8 efuse_id;
1658
1659         rtlhal->ic_class = IC_INFERIORITY_A;
1660
1661         /* Only retrieving while using EFUSE. */
1662         if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) &&
1663                 !rtlefuse->autoload_failflag) {
1664                 efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET);
1665
1666                 if (efuse_id == 0xfe)
1667                         rtlhal->ic_class = IC_INFERIORITY_B;
1668         }
1669 }
1670
1671 static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
1672 {
1673         struct rtl_priv *rtlpriv = rtl_priv(hw);
1674         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1675         struct rtl_phy *rtlphy = &(rtlpriv->phy);
1676         u16 i, usvalue;
1677         u16     eeprom_id;
1678         u8 tempval;
1679         u8 hwinfo[HWSET_MAX_SIZE_92S];
1680         u8 rf_path, index;
1681
1682         if (rtlefuse->epromtype == EEPROM_93C46) {
1683                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1684                          "RTL819X Not boot from eeprom, check it !!\n");
1685         } else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
1686                 rtl_efuse_shadow_map_update(hw);
1687
1688                 memcpy((void *)hwinfo, (void *)
1689                         &rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
1690                         HWSET_MAX_SIZE_92S);
1691         }
1692
1693         RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP",
1694                       hwinfo, HWSET_MAX_SIZE_92S);
1695
1696         eeprom_id = *((u16 *)&hwinfo[0]);
1697         if (eeprom_id != RTL8190_EEPROM_ID) {
1698                 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
1699                          "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
1700                 rtlefuse->autoload_failflag = true;
1701         } else {
1702                 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
1703                 rtlefuse->autoload_failflag = false;
1704         }
1705
1706         if (rtlefuse->autoload_failflag)
1707                 return;
1708
1709         _rtl8192se_get_IC_Inferiority(hw);
1710
1711         /* Read IC Version && Channel Plan */
1712         /* VID, DID      SE     0xA-D */
1713         rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
1714         rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
1715         rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
1716         rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
1717         rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
1718
1719         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1720                  "EEPROMId = 0x%4x\n", eeprom_id);
1721         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1722                  "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
1723         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1724                  "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
1725         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1726                  "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
1727         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1728                  "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
1729
1730         for (i = 0; i < 6; i += 2) {
1731                 usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
1732                 *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
1733         }
1734
1735         for (i = 0; i < 6; i++)
1736                 rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
1737
1738         RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
1739
1740         /* Get Tx Power Level by Channel */
1741         /* Read Tx power of Channel 1 ~ 14 from EEPROM. */
1742         /* 92S suupport RF A & B */
1743         for (rf_path = 0; rf_path < 2; rf_path++) {
1744                 for (i = 0; i < 3; i++) {
1745                         /* Read CCK RF A & B Tx power  */
1746                         rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] =
1747                         hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i];
1748
1749                         /* Read OFDM RF A & B Tx power for 1T */
1750                         rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
1751                         hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i];
1752
1753                         /* Read OFDM RF A & B Tx power for 2T */
1754                         rtlefuse->eprom_chnl_txpwr_ht40_2sdf[rf_path][i]
1755                                  = hwinfo[EEPROM_TXPOWERBASE + 12 +
1756                                    rf_path * 3 + i];
1757                 }
1758         }
1759
1760         for (rf_path = 0; rf_path < 2; rf_path++)
1761                 for (i = 0; i < 3; i++)
1762                         RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
1763                                 "RF(%d) EEPROM CCK Area(%d) = 0x%x\n",
1764                                 rf_path, i,
1765                                 rtlefuse->eeprom_chnlarea_txpwr_cck
1766                                 [rf_path][i]);
1767         for (rf_path = 0; rf_path < 2; rf_path++)
1768                 for (i = 0; i < 3; i++)
1769                         RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
1770                                 "RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
1771                                 rf_path, i,
1772                                 rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
1773                                 [rf_path][i]);
1774         for (rf_path = 0; rf_path < 2; rf_path++)
1775                 for (i = 0; i < 3; i++)
1776                         RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
1777                                 "RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
1778                                 rf_path, i,
1779                                 rtlefuse->eprom_chnl_txpwr_ht40_2sdf
1780                                 [rf_path][i]);
1781
1782         for (rf_path = 0; rf_path < 2; rf_path++) {
1783
1784                 /* Assign dedicated channel tx power */
1785                 for (i = 0; i < 14; i++)        {
1786                         /* channel 1~3 use the same Tx Power Level. */
1787                         if (i < 3)
1788                                 index = 0;
1789                         /* Channel 4-8 */
1790                         else if (i < 8)
1791                                 index = 1;
1792                         /* Channel 9-14 */
1793                         else
1794                                 index = 2;
1795
1796                         /* Record A & B CCK /OFDM - 1T/2T Channel area
1797                          * tx power */
1798                         rtlefuse->txpwrlevel_cck[rf_path][i]  =
1799                                 rtlefuse->eeprom_chnlarea_txpwr_cck
1800                                                         [rf_path][index];
1801                         rtlefuse->txpwrlevel_ht40_1s[rf_path][i]  =
1802                                 rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
1803                                                         [rf_path][index];
1804                         rtlefuse->txpwrlevel_ht40_2s[rf_path][i]  =
1805                                 rtlefuse->eprom_chnl_txpwr_ht40_2sdf
1806                                                         [rf_path][index];
1807                 }
1808
1809                 for (i = 0; i < 14; i++) {
1810                         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1811                                 "RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
1812                                 rf_path, i,
1813                                 rtlefuse->txpwrlevel_cck[rf_path][i],
1814                                 rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
1815                                 rtlefuse->txpwrlevel_ht40_2s[rf_path][i]);
1816                 }
1817         }
1818
1819         for (rf_path = 0; rf_path < 2; rf_path++) {
1820                 for (i = 0; i < 3; i++) {
1821                         /* Read Power diff limit. */
1822                         rtlefuse->eeprom_pwrgroup[rf_path][i] =
1823                                 hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i];
1824                 }
1825         }
1826
1827         for (rf_path = 0; rf_path < 2; rf_path++) {
1828                 /* Fill Pwr group */
1829                 for (i = 0; i < 14; i++) {
1830                         /* Chanel 1-3 */
1831                         if (i < 3)
1832                                 index = 0;
1833                         /* Channel 4-8 */
1834                         else if (i < 8)
1835                                 index = 1;
1836                         /* Channel 9-13 */
1837                         else
1838                                 index = 2;
1839
1840                         rtlefuse->pwrgroup_ht20[rf_path][i] =
1841                                 (rtlefuse->eeprom_pwrgroup[rf_path][index] &
1842                                 0xf);
1843                         rtlefuse->pwrgroup_ht40[rf_path][i] =
1844                                 ((rtlefuse->eeprom_pwrgroup[rf_path][index] &
1845                                 0xf0) >> 4);
1846
1847                         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1848                                 "RF-%d pwrgroup_ht20[%d] = 0x%x\n",
1849                                 rf_path, i,
1850                                 rtlefuse->pwrgroup_ht20[rf_path][i]);
1851                         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1852                                 "RF-%d pwrgroup_ht40[%d] = 0x%x\n",
1853                                 rf_path, i,
1854                                 rtlefuse->pwrgroup_ht40[rf_path][i]);
1855                         }
1856         }
1857
1858         for (i = 0; i < 14; i++) {
1859                 /* Read tx power difference between HT OFDM 20/40 MHZ */
1860                 /* channel 1-3 */
1861                 if (i < 3)
1862                         index = 0;
1863                 /* Channel 4-8 */
1864                 else if (i < 8)
1865                         index = 1;
1866                 /* Channel 9-14 */
1867                 else
1868                         index = 2;
1869
1870                 tempval = hwinfo[EEPROM_TX_PWR_HT20_DIFF + index] & 0xff;
1871                 rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
1872                 rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
1873                                                  ((tempval >> 4) & 0xF);
1874
1875                 /* Read OFDM<->HT tx power diff */
1876                 /* Channel 1-3 */
1877                 if (i < 3)
1878                         index = 0;
1879                 /* Channel 4-8 */
1880                 else if (i < 8)
1881                         index = 0x11;
1882                 /* Channel 9-14 */
1883                 else
1884                         index = 1;
1885
1886                 tempval = hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index] & 0xff;
1887                 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] =
1888                                  (tempval & 0xF);
1889                 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
1890                                  ((tempval >> 4) & 0xF);
1891
1892                 tempval = hwinfo[TX_PWR_SAFETY_CHK];
1893                 rtlefuse->txpwr_safetyflag = (tempval & 0x01);
1894         }
1895
1896         rtlefuse->eeprom_regulatory = 0;
1897         if (rtlefuse->eeprom_version >= 2) {
1898                 /* BIT(0)~2 */
1899                 if (rtlefuse->eeprom_version >= 4)
1900                         rtlefuse->eeprom_regulatory =
1901                                  (hwinfo[EEPROM_REGULATORY] & 0x7);
1902                 else /* BIT(0) */
1903                         rtlefuse->eeprom_regulatory =
1904                                  (hwinfo[EEPROM_REGULATORY] & 0x1);
1905         }
1906         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1907                 "eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
1908
1909         for (i = 0; i < 14; i++)
1910                 RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1911                         "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n",
1912                         i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]);
1913         for (i = 0; i < 14; i++)
1914                 RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1915                         "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n",
1916                         i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]);
1917         for (i = 0; i < 14; i++)
1918                 RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1919                         "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n",
1920                         i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]);
1921         for (i = 0; i < 14; i++)
1922                 RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1923                         "RF-B Legacy to HT40 Diff[%d] = 0x%x\n",
1924                         i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]);
1925
1926         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1927                 "TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag);
1928
1929         /* Read RF-indication and Tx Power gain
1930          * index diff of legacy to HT OFDM rate. */
1931         tempval = hwinfo[EEPROM_RFIND_POWERDIFF] & 0xff;
1932         rtlefuse->eeprom_txpowerdiff = tempval;
1933         rtlefuse->legacy_httxpowerdiff =
1934                 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
1935
1936         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1937                 "TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff);
1938
1939         /* Get TSSI value for each path. */
1940         usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
1941         rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8);
1942         usvalue = hwinfo[EEPROM_TSSI_B];
1943         rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
1944
1945         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
1946                 rtlefuse->eeprom_tssi[RF90_PATH_A],
1947                 rtlefuse->eeprom_tssi[RF90_PATH_B]);
1948
1949         /* Read antenna tx power offset of B/C/D to A  from EEPROM */
1950         /* and read ThermalMeter from EEPROM */
1951         tempval = hwinfo[EEPROM_THERMALMETER];
1952         rtlefuse->eeprom_thermalmeter = tempval;
1953         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1954                 "thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
1955
1956         /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
1957         rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
1958         rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100;
1959
1960         /* Read CrystalCap from EEPROM */
1961         tempval = hwinfo[EEPROM_CRYSTALCAP] >> 4;
1962         rtlefuse->eeprom_crystalcap = tempval;
1963         /* CrystalCap, BIT(12)~15 */
1964         rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap;
1965
1966         /* Read IC Version && Channel Plan */
1967         /* Version ID, Channel plan */
1968         rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
1969         rtlefuse->txpwr_fromeprom = true;
1970         RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
1971                 "EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan);
1972
1973         /* Read Customer ID or Board Type!!! */
1974         tempval = hwinfo[EEPROM_BOARDTYPE];
1975         /* Change RF type definition */
1976         if (tempval == 0)
1977                 rtlphy->rf_type = RF_2T2R;
1978         else if (tempval == 1)
1979                 rtlphy->rf_type = RF_1T2R;
1980         else if (tempval == 2)
1981                 rtlphy->rf_type = RF_1T2R;
1982         else if (tempval == 3)
1983                 rtlphy->rf_type = RF_1T1R;
1984
1985         /* 1T2R but 1SS (1x1 receive combining) */
1986         rtlefuse->b1x1_recvcombine = false;
1987         if (rtlphy->rf_type == RF_1T2R) {
1988                 tempval = rtl_read_byte(rtlpriv, 0x07);
1989                 if (!(tempval & BIT(0))) {
1990                         rtlefuse->b1x1_recvcombine = true;
1991                         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1992                                  "RF_TYPE=1T2R but only 1SS\n");
1993                 }
1994         }
1995         rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
1996         rtlefuse->eeprom_oemid = *&hwinfo[EEPROM_CUSTOMID];
1997
1998         RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x",
1999                  rtlefuse->eeprom_oemid);
2000
2001         /* set channel paln to world wide 13 */
2002         rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
2003 }
2004
2005 void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
2006 {
2007         struct rtl_priv *rtlpriv = rtl_priv(hw);
2008         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
2009         u8 tmp_u1b = 0;
2010
2011         tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
2012
2013         if (tmp_u1b & BIT(4)) {
2014                 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n");
2015                 rtlefuse->epromtype = EEPROM_93C46;
2016         } else {
2017                 RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n");
2018                 rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
2019         }
2020
2021         if (tmp_u1b & BIT(5)) {
2022                 RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
2023                 rtlefuse->autoload_failflag = false;
2024                 _rtl92se_read_adapter_info(hw);
2025         } else {
2026                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
2027                 rtlefuse->autoload_failflag = true;
2028         }
2029 }
2030
2031 static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw,
2032                                           struct ieee80211_sta *sta)
2033 {
2034         struct rtl_priv *rtlpriv = rtl_priv(hw);
2035         struct rtl_phy *rtlphy = &(rtlpriv->phy);
2036         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2037         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
2038         u32 ratr_value;
2039         u8 ratr_index = 0;
2040         u8 nmode = mac->ht_enable;
2041         u8 mimo_ps = IEEE80211_SMPS_OFF;
2042         u16 shortgi_rate = 0;
2043         u32 tmp_ratr_value = 0;
2044         u8 curtxbw_40mhz = mac->bw_40;
2045         u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
2046                                 1 : 0;
2047         u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
2048                                 1 : 0;
2049         enum wireless_mode wirelessmode = mac->mode;
2050
2051         if (rtlhal->current_bandtype == BAND_ON_5G)
2052                 ratr_value = sta->supp_rates[1] << 4;
2053         else
2054                 ratr_value = sta->supp_rates[0];
2055         if (mac->opmode == NL80211_IFTYPE_ADHOC)
2056                 ratr_value = 0xfff;
2057         ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
2058                         sta->ht_cap.mcs.rx_mask[0] << 12);
2059         switch (wirelessmode) {
2060         case WIRELESS_MODE_B:
2061                 ratr_value &= 0x0000000D;
2062                 break;
2063         case WIRELESS_MODE_G:
2064                 ratr_value &= 0x00000FF5;
2065                 break;
2066         case WIRELESS_MODE_N_24G:
2067         case WIRELESS_MODE_N_5G:
2068                 nmode = 1;
2069                 if (mimo_ps == IEEE80211_SMPS_STATIC) {
2070                         ratr_value &= 0x0007F005;
2071                 } else {
2072                         u32 ratr_mask;
2073
2074                         if (get_rf_type(rtlphy) == RF_1T2R ||
2075                             get_rf_type(rtlphy) == RF_1T1R) {
2076                                 if (curtxbw_40mhz)
2077                                         ratr_mask = 0x000ff015;
2078                                 else
2079                                         ratr_mask = 0x000ff005;
2080                         } else {
2081                                 if (curtxbw_40mhz)
2082                                         ratr_mask = 0x0f0ff015;
2083                                 else
2084                                         ratr_mask = 0x0f0ff005;
2085                         }
2086
2087                         ratr_value &= ratr_mask;
2088                 }
2089                 break;
2090         default:
2091                 if (rtlphy->rf_type == RF_1T2R)
2092                         ratr_value &= 0x000ff0ff;
2093                 else
2094                         ratr_value &= 0x0f0ff0ff;
2095
2096                 break;
2097         }
2098
2099         if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
2100                 ratr_value &= 0x0FFFFFFF;
2101         else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
2102                 ratr_value &= 0x0FFFFFF0;
2103
2104         if (nmode && ((curtxbw_40mhz &&
2105                          curshortgi_40mhz) || (!curtxbw_40mhz &&
2106                                                  curshortgi_20mhz))) {
2107
2108                 ratr_value |= 0x10000000;
2109                 tmp_ratr_value = (ratr_value >> 12);
2110
2111                 for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
2112                         if ((1 << shortgi_rate) & tmp_ratr_value)
2113                                 break;
2114                 }
2115
2116                 shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
2117                     (shortgi_rate << 4) | (shortgi_rate);
2118
2119                 rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
2120         }
2121
2122         rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value);
2123         if (ratr_value & 0xfffff000)
2124                 rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N);
2125         else
2126                 rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
2127
2128         RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
2129                  rtl_read_dword(rtlpriv, ARFR0));
2130 }
2131
2132 static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
2133                                          struct ieee80211_sta *sta,
2134                                          u8 rssi_level)
2135 {
2136         struct rtl_priv *rtlpriv = rtl_priv(hw);
2137         struct rtl_phy *rtlphy = &(rtlpriv->phy);
2138         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2139         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
2140         struct rtl_sta_info *sta_entry = NULL;
2141         u32 ratr_bitmap;
2142         u8 ratr_index = 0;
2143         u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
2144         u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
2145                                 1 : 0;
2146         u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
2147                                 1 : 0;
2148         enum wireless_mode wirelessmode = 0;
2149         bool shortgi = false;
2150         u32 ratr_value = 0;
2151         u8 shortgi_rate = 0;
2152         u32 mask = 0;
2153         u32 band = 0;
2154         bool bmulticast = false;
2155         u8 macid = 0;
2156         u8 mimo_ps = IEEE80211_SMPS_OFF;
2157
2158         sta_entry = (struct rtl_sta_info *) sta->drv_priv;
2159         wirelessmode = sta_entry->wireless_mode;
2160         if (mac->opmode == NL80211_IFTYPE_STATION)
2161                 curtxbw_40mhz = mac->bw_40;
2162         else if (mac->opmode == NL80211_IFTYPE_AP ||
2163                 mac->opmode == NL80211_IFTYPE_ADHOC)
2164                 macid = sta->aid + 1;
2165
2166         if (rtlhal->current_bandtype == BAND_ON_5G)
2167                 ratr_bitmap = sta->supp_rates[1] << 4;
2168         else
2169                 ratr_bitmap = sta->supp_rates[0];
2170         if (mac->opmode == NL80211_IFTYPE_ADHOC)
2171                 ratr_bitmap = 0xfff;
2172         ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
2173                         sta->ht_cap.mcs.rx_mask[0] << 12);
2174         switch (wirelessmode) {
2175         case WIRELESS_MODE_B:
2176                 band |= WIRELESS_11B;
2177                 ratr_index = RATR_INX_WIRELESS_B;
2178                 if (ratr_bitmap & 0x0000000c)
2179                         ratr_bitmap &= 0x0000000d;
2180                 else
2181                         ratr_bitmap &= 0x0000000f;
2182                 break;
2183         case WIRELESS_MODE_G:
2184                 band |= (WIRELESS_11G | WIRELESS_11B);
2185                 ratr_index = RATR_INX_WIRELESS_GB;
2186
2187                 if (rssi_level == 1)
2188                         ratr_bitmap &= 0x00000f00;
2189                 else if (rssi_level == 2)
2190                         ratr_bitmap &= 0x00000ff0;
2191                 else
2192                         ratr_bitmap &= 0x00000ff5;
2193                 break;
2194         case WIRELESS_MODE_A:
2195                 band |= WIRELESS_11A;
2196                 ratr_index = RATR_INX_WIRELESS_A;
2197                 ratr_bitmap &= 0x00000ff0;
2198                 break;
2199         case WIRELESS_MODE_N_24G:
2200         case WIRELESS_MODE_N_5G:
2201                 band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
2202                 ratr_index = RATR_INX_WIRELESS_NGB;
2203
2204                 if (mimo_ps == IEEE80211_SMPS_STATIC) {
2205                         if (rssi_level == 1)
2206                                 ratr_bitmap &= 0x00070000;
2207                         else if (rssi_level == 2)
2208                                 ratr_bitmap &= 0x0007f000;
2209                         else
2210                                 ratr_bitmap &= 0x0007f005;
2211                 } else {
2212                         if (rtlphy->rf_type == RF_1T2R ||
2213                                 rtlphy->rf_type == RF_1T1R) {
2214                                 if (rssi_level == 1) {
2215                                                 ratr_bitmap &= 0x000f0000;
2216                                 } else if (rssi_level == 3) {
2217                                         ratr_bitmap &= 0x000fc000;
2218                                 } else if (rssi_level == 5) {
2219                                                 ratr_bitmap &= 0x000ff000;
2220                                 } else {
2221                                         if (curtxbw_40mhz)
2222                                                 ratr_bitmap &= 0x000ff015;
2223                                         else
2224                                                 ratr_bitmap &= 0x000ff005;
2225                                 }
2226                         } else {
2227                                 if (rssi_level == 1) {
2228                                         ratr_bitmap &= 0x0f8f0000;
2229                                 } else if (rssi_level == 3) {
2230                                         ratr_bitmap &= 0x0f8fc000;
2231                                 } else if (rssi_level == 5) {
2232                                         ratr_bitmap &= 0x0f8ff000;
2233                                 } else {
2234                                         if (curtxbw_40mhz)
2235                                                 ratr_bitmap &= 0x0f8ff015;
2236                                         else
2237                                                 ratr_bitmap &= 0x0f8ff005;
2238                                 }
2239                         }
2240                 }
2241
2242                 if ((curtxbw_40mhz && curshortgi_40mhz) ||
2243                     (!curtxbw_40mhz && curshortgi_20mhz)) {
2244                         if (macid == 0)
2245                                 shortgi = true;
2246                         else if (macid == 1)
2247                                 shortgi = false;
2248                 }
2249                 break;
2250         default:
2251                 band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
2252                 ratr_index = RATR_INX_WIRELESS_NGB;
2253
2254                 if (rtlphy->rf_type == RF_1T2R)
2255                         ratr_bitmap &= 0x000ff0ff;
2256                 else
2257                         ratr_bitmap &= 0x0f8ff0ff;
2258                 break;
2259         }
2260         sta_entry->ratr_index = ratr_index;
2261
2262         if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
2263                 ratr_bitmap &= 0x0FFFFFFF;
2264         else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
2265                 ratr_bitmap &= 0x0FFFFFF0;
2266
2267         if (shortgi) {
2268                 ratr_bitmap |= 0x10000000;
2269                 /* Get MAX MCS available. */
2270                 ratr_value = (ratr_bitmap >> 12);
2271                 for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
2272                         if ((1 << shortgi_rate) & ratr_value)
2273                                 break;
2274                 }
2275
2276                 shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
2277                         (shortgi_rate << 4) | (shortgi_rate);
2278                 rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
2279         }
2280
2281         mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
2282
2283         RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, "mask = %x, bitmap = %x\n",
2284                  mask, ratr_bitmap);
2285         rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
2286         rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
2287
2288         if (macid != 0)
2289                 sta_entry->ratr_index = ratr_index;
2290 }
2291
2292 void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
2293                 struct ieee80211_sta *sta, u8 rssi_level)
2294 {
2295         struct rtl_priv *rtlpriv = rtl_priv(hw);
2296
2297         if (rtlpriv->dm.useramask)
2298                 rtl92se_update_hal_rate_mask(hw, sta, rssi_level);
2299         else
2300                 rtl92se_update_hal_rate_table(hw, sta);
2301 }
2302
2303 void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw)
2304 {
2305         struct rtl_priv *rtlpriv = rtl_priv(hw);
2306         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2307         u16 sifs_timer;
2308
2309         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
2310                                       &mac->slot_time);
2311         sifs_timer = 0x0e0e;
2312         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
2313
2314 }
2315
2316 /* this ifunction is for RFKILL, it's different with windows,
2317  * because UI will disable wireless when GPIO Radio Off.
2318  * And here we not check or Disable/Enable ASPM like windows*/
2319 bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
2320 {
2321         struct rtl_priv *rtlpriv = rtl_priv(hw);
2322         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
2323         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
2324         enum rf_pwrstate rfpwr_toset /*, cur_rfstate */;
2325         unsigned long flag = 0;
2326         bool actuallyset = false;
2327         bool turnonbypowerdomain = false;
2328
2329         /* just 8191se can check gpio before firstup, 92c/92d have fixed it */
2330         if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
2331                 return false;
2332
2333         if (ppsc->swrf_processing)
2334                 return false;
2335
2336         spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2337         if (ppsc->rfchange_inprogress) {
2338                 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2339                 return false;
2340         } else {
2341                 ppsc->rfchange_inprogress = true;
2342                 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2343         }
2344
2345         /* cur_rfstate = ppsc->rfpwr_state;*/
2346
2347         /* because after _rtl92s_phy_set_rfhalt, all power
2348          * closed, so we must open some power for GPIO check,
2349          * or we will always check GPIO RFOFF here,
2350          * And we should close power after GPIO check */
2351         if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
2352                 _rtl92se_power_domain_init(hw);
2353                 turnonbypowerdomain = true;
2354         }
2355
2356         rfpwr_toset = _rtl92se_rf_onoff_detect(hw);
2357
2358         if ((ppsc->hwradiooff) && (rfpwr_toset == ERFON)) {
2359                 RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2360                          "RFKILL-HW Radio ON, RF ON\n");
2361
2362                 rfpwr_toset = ERFON;
2363                 ppsc->hwradiooff = false;
2364                 actuallyset = true;
2365         } else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) {
2366                 RT_TRACE(rtlpriv, COMP_RF,
2367                          DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n");
2368
2369                 rfpwr_toset = ERFOFF;
2370                 ppsc->hwradiooff = true;
2371                 actuallyset = true;
2372         }
2373
2374         if (actuallyset) {
2375                 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2376                 ppsc->rfchange_inprogress = false;
2377                 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2378
2379         /* this not include ifconfig wlan0 down case */
2380         /* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */
2381         } else {
2382                 /* because power_domain_init may be happen when
2383                  * _rtl92s_phy_set_rfhalt, this will open some powers
2384                  * and cause current increasing about 40 mA for ips,
2385                  * rfoff and ifconfig down, so we set
2386                  * _rtl92s_phy_set_rfhalt again here */
2387                 if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC &&
2388                         turnonbypowerdomain) {
2389                         _rtl92s_phy_set_rfhalt(hw);
2390                         RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
2391                 }
2392
2393                 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2394                 ppsc->rfchange_inprogress = false;
2395                 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2396         }
2397
2398         *valid = 1;
2399         return !ppsc->hwradiooff;
2400
2401 }
2402
2403 /* Is_wepkey just used for WEP used as group & pairwise key
2404  * if pairwise is AES ang group is WEP Is_wepkey == false.*/
2405 void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
2406         bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
2407 {
2408         struct rtl_priv *rtlpriv = rtl_priv(hw);
2409         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2410         struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
2411         u8 *macaddr = p_macaddr;
2412
2413         u32 entry_id = 0;
2414         bool is_pairwise = false;
2415
2416         static u8 cam_const_addr[4][6] = {
2417                 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
2418                 {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
2419                 {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
2420                 {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
2421         };
2422         static u8 cam_const_broad[] = {
2423                 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
2424         };
2425
2426         if (clear_all) {
2427                 u8 idx = 0;
2428                 u8 cam_offset = 0;
2429                 u8 clear_number = 5;
2430
2431                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n");
2432
2433                 for (idx = 0; idx < clear_number; idx++) {
2434                         rtl_cam_mark_invalid(hw, cam_offset + idx);
2435                         rtl_cam_empty_entry(hw, cam_offset + idx);
2436
2437                         if (idx < 5) {
2438                                 memset(rtlpriv->sec.key_buf[idx], 0,
2439                                        MAX_KEY_LEN);
2440                                 rtlpriv->sec.key_len[idx] = 0;
2441                         }
2442                 }
2443
2444         } else {
2445                 switch (enc_algo) {
2446                 case WEP40_ENCRYPTION:
2447                         enc_algo = CAM_WEP40;
2448                         break;
2449                 case WEP104_ENCRYPTION:
2450                         enc_algo = CAM_WEP104;
2451                         break;
2452                 case TKIP_ENCRYPTION:
2453                         enc_algo = CAM_TKIP;
2454                         break;
2455                 case AESCCMP_ENCRYPTION:
2456                         enc_algo = CAM_AES;
2457                         break;
2458                 default:
2459                         RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
2460                                  "switch case not processed\n");
2461                         enc_algo = CAM_TKIP;
2462                         break;
2463                 }
2464
2465                 if (is_wepkey || rtlpriv->sec.use_defaultkey) {
2466                         macaddr = cam_const_addr[key_index];
2467                         entry_id = key_index;
2468                 } else {
2469                         if (is_group) {
2470                                 macaddr = cam_const_broad;
2471                                 entry_id = key_index;
2472                         } else {
2473                                 if (mac->opmode == NL80211_IFTYPE_AP) {
2474                                         entry_id = rtl_cam_get_free_entry(hw,
2475                                                                  p_macaddr);
2476                                         if (entry_id >=  TOTAL_CAM_ENTRY) {
2477                                                 RT_TRACE(rtlpriv,
2478                                                          COMP_SEC, DBG_EMERG,
2479                                                          "Can not find free hw security cam entry\n");
2480                                                 return;
2481                                         }
2482                                 } else {
2483                                         entry_id = CAM_PAIRWISE_KEY_POSITION;
2484                                 }
2485
2486                                 key_index = PAIRWISE_KEYIDX;
2487                                 is_pairwise = true;
2488                         }
2489                 }
2490
2491                 if (rtlpriv->sec.key_len[key_index] == 0) {
2492                         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2493                                  "delete one entry, entry_id is %d\n",
2494                                  entry_id);
2495                         if (mac->opmode == NL80211_IFTYPE_AP)
2496                                 rtl_cam_del_entry(hw, p_macaddr);
2497                         rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
2498                 } else {
2499                         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2500                                  "add one entry\n");
2501                         if (is_pairwise) {
2502                                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2503                                          "set Pairwise key\n");
2504
2505                                 rtl_cam_add_one_entry(hw, macaddr, key_index,
2506                                         entry_id, enc_algo,
2507                                         CAM_CONFIG_NO_USEDK,
2508                                         rtlpriv->sec.key_buf[key_index]);
2509                         } else {
2510                                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2511                                          "set group key\n");
2512
2513                                 if (mac->opmode == NL80211_IFTYPE_ADHOC) {
2514                                         rtl_cam_add_one_entry(hw,
2515                                                 rtlefuse->dev_addr,
2516                                                 PAIRWISE_KEYIDX,
2517                                                 CAM_PAIRWISE_KEY_POSITION,
2518                                                 enc_algo, CAM_CONFIG_NO_USEDK,
2519                                                 rtlpriv->sec.key_buf[entry_id]);
2520                                 }
2521
2522                                 rtl_cam_add_one_entry(hw, macaddr, key_index,
2523                                               entry_id, enc_algo,
2524                                               CAM_CONFIG_NO_USEDK,
2525                                               rtlpriv->sec.key_buf[entry_id]);
2526                         }
2527
2528                 }
2529         }
2530 }
2531
2532 void rtl92se_suspend(struct ieee80211_hw *hw)
2533 {
2534         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
2535
2536         rtlpci->up_first_time = true;
2537 }
2538
2539 void rtl92se_resume(struct ieee80211_hw *hw)
2540 {
2541         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
2542         u32 val;
2543
2544         pci_read_config_dword(rtlpci->pdev, 0x40, &val);
2545         if ((val & 0x0000ff00) != 0)
2546                 pci_write_config_dword(rtlpci->pdev, 0x40,
2547                         val & 0xffff00ff);
2548 }