drivers/net/wireless/rt2x00/rt2800usb.c

   1 /*
   2         Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3         Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4         Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
   5         Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
   6         Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
   7         Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
   8         <http://rt2x00.serialmonkey.com>
   9
  10         This program is free software; you can redistribute it and/or modify
  11         it under the terms of the GNU General Public License as published by
  12         the Free Software Foundation; either version 2 of the License, or
  13         (at your option) any later version.
  14
  15         This program is distributed in the hope that it will be useful,
  16         but WITHOUT ANY WARRANTY; without even the implied warranty of
  17         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18         GNU General Public License for more details.
  19
  20         You should have received a copy of the GNU General Public License
  21         along with this program; if not, see <http://www.gnu.org/licenses/>.
  22  */
  23
  24 /*
  25         Module: rt2800usb
  26         Abstract: rt2800usb device specific routines.
  27         Supported chipsets: RT2800U.
  28  */
  29
  30 #include <linux/delay.h>
  31 #include <linux/etherdevice.h>
  32 #include <linux/kernel.h>
  33 #include <linux/module.h>
  34 #include <linux/usb.h>
  35
  36 #include "rt2x00.h"
  37 #include "rt2x00usb.h"
  38 #include "rt2800lib.h"
  39 #include "rt2800.h"
  40 #include "rt2800usb.h"
  41
  42 /*
  43  * Allow hardware encryption to be disabled.
  44  */
  45 static bool modparam_nohwcrypt;
  46 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  47 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  48
  49 static bool rt2800usb_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
  50 {
  51         return modparam_nohwcrypt;
  52 }
  53
  54 /*
  55  * Queue handlers.
  56  */
  57 static void rt2800usb_start_queue(struct data_queue *queue)
  58 {
  59         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
  60         u32 reg;
  61
  62         switch (queue->qid) {
  63         case QID_RX:
  64                 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
  65                 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
  66                 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
  67                 break;
  68         case QID_BEACON:
  69                 rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
  70                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
  71                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
  72                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
  73                 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
  74                 break;
  75         default:
  76                 break;
  77         }
  78 }
  79
  80 static void rt2800usb_stop_queue(struct data_queue *queue)
  81 {
  82         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
  83         u32 reg;
  84
  85         switch (queue->qid) {
  86         case QID_RX:
  87                 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
  88                 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
  89                 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
  90                 break;
  91         case QID_BEACON:
  92                 rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
  93                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
  94                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
  95                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
  96                 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
  97                 break;
  98         default:
  99                 break;
 100         }
 101 }
 102
 103 /*
 104  * test if there is an entry in any TX queue for which DMA is done
 105  * but the TX status has not been returned yet
 106  */
 107 static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
 108 {
 109         struct data_queue *queue;
 110
 111         tx_queue_for_each(rt2x00dev, queue) {
 112                 if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
 113                     rt2x00queue_get_entry(queue, Q_INDEX_DONE))
 114                         return true;
 115         }
 116         return false;
 117 }
 118
 119 static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
 120 {
 121         bool tout;
 122
 123         if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 124                 return false;
 125
 126         tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
 127         if (unlikely(tout))
 128                 rt2x00_dbg(entry->queue->rt2x00dev,
 129                            "TX status timeout for entry %d in queue %d\n",
 130                            entry->entry_idx, entry->queue->qid);
 131         return tout;
 132
 133 }
 134
 135 static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
 136 {
 137         struct data_queue *queue;
 138         struct queue_entry *entry;
 139
 140         tx_queue_for_each(rt2x00dev, queue) {
 141                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 142                 if (rt2800usb_entry_txstatus_timeout(entry))
 143                         return true;
 144         }
 145         return false;
 146 }
 147
 148 #define TXSTATUS_READ_INTERVAL 1000000
 149
 150 static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 151                                                  int urb_status, u32 tx_status)
 152 {
 153         bool valid;
 154
 155         if (urb_status) {
 156                 rt2x00_warn(rt2x00dev, "TX status read failed %d\n",
 157                             urb_status);
 158
 159                 goto stop_reading;
 160         }
 161
 162         valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID);
 163         if (valid) {
 164                 if (!kfifo_put(&rt2x00dev->txstatus_fifo, tx_status))
 165                         rt2x00_warn(rt2x00dev, "TX status FIFO overrun\n");
 166
 167                 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 168
 169                 /* Reschedule urb to read TX status again instantly */
 170                 return true;
 171         }
 172
 173         /* Check if there is any entry that timedout waiting on TX status */
 174         if (rt2800usb_txstatus_timeout(rt2x00dev))
 175                 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 176
 177         if (rt2800usb_txstatus_pending(rt2x00dev)) {
 178                 /* Read register after 1 ms */
 179                 hrtimer_start(&rt2x00dev->txstatus_timer,
 180                               ktime_set(0, TXSTATUS_READ_INTERVAL),
 181                               HRTIMER_MODE_REL);
 182                 return false;
 183         }
 184
 185 stop_reading:
 186         clear_bit(TX_STATUS_READING, &rt2x00dev->flags);
 187         /*
 188          * There is small race window above, between txstatus pending check and
 189          * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
 190          * here again if status reading is needed.
 191          */
 192         if (rt2800usb_txstatus_pending(rt2x00dev) &&
 193             !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 194                 return true;
 195         else
 196                 return false;
 197 }
 198
 199 static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
 200 {
 201
 202         if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 203                 return;
 204
 205         /* Read TX_STA_FIFO register after 2 ms */
 206         hrtimer_start(&rt2x00dev->txstatus_timer,
 207                       ktime_set(0, 2*TXSTATUS_READ_INTERVAL),
 208                       HRTIMER_MODE_REL);
 209 }
 210
 211 static void rt2800usb_tx_dma_done(struct queue_entry *entry)
 212 {
 213         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 214
 215         rt2800usb_async_read_tx_status(rt2x00dev);
 216 }
 217
 218 static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
 219 {
 220         struct rt2x00_dev *rt2x00dev =
 221             container_of(timer, struct rt2x00_dev, txstatus_timer);
 222
 223         rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
 224                                       rt2800usb_tx_sta_fifo_read_completed);
 225
 226         return HRTIMER_NORESTART;
 227 }
 228
 229 /*
 230  * Firmware functions
 231  */
 232 static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
 233 {
 234         __le32 *reg;
 235         u32 fw_mode;
 236         int ret;
 237
 238         reg = kmalloc(sizeof(*reg), GFP_KERNEL);
 239         if (reg == NULL)
 240                 return -ENOMEM;
 241         /* cannot use rt2x00usb_register_read here as it uses different
 242          * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
 243          * magic value USB_MODE_AUTORUN (0x11) to the device, thus the
 244          * returned value would be invalid.
 245          */
 246         ret = rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
 247                                        USB_VENDOR_REQUEST_IN, 0,
 248                                        USB_MODE_AUTORUN, reg, sizeof(*reg),
 249                                        REGISTER_TIMEOUT_FIRMWARE);
 250         fw_mode = le32_to_cpu(*reg);
 251         kfree(reg);
 252         if (ret < 0)
 253                 return ret;
 254
 255         if ((fw_mode & 0x00000003) == 2)
 256                 return 1;
 257
 258         return 0;
 259 }
 260
 261 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 262 {
 263         return FIRMWARE_RT2870;
 264 }
 265
 266 static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 267                                     const u8 *data, const size_t len)
 268 {
 269         int status;
 270         u32 offset;
 271         u32 length;
 272         int retval;
 273
 274         /*
 275          * Check which section of the firmware we need.
 276          */
 277         if (rt2x00_rt(rt2x00dev, RT2860) ||
 278             rt2x00_rt(rt2x00dev, RT2872) ||
 279             rt2x00_rt(rt2x00dev, RT3070)) {
 280                 offset = 0;
 281                 length = 4096;
 282         } else {
 283                 offset = 4096;
 284                 length = 4096;
 285         }
 286
 287         /*
 288          * Write firmware to device.
 289          */
 290         retval = rt2800usb_autorun_detect(rt2x00dev);
 291         if (retval < 0)
 292                 return retval;
 293         if (retval) {
 294                 rt2x00_info(rt2x00dev,
 295                             "Firmware loading not required - NIC in AutoRun mode\n");
 296                 __clear_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
 297         } else {
 298                 rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
 299                                               data + offset, length);
 300         }
 301
 302         rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 303         rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
 304
 305         /*
 306          * Send firmware request to device to load firmware,
 307          * we need to specify a long timeout time.
 308          */
 309         status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
 310                                              0, USB_MODE_FIRMWARE,
 311                                              REGISTER_TIMEOUT_FIRMWARE);
 312         if (status < 0) {
 313                 rt2x00_err(rt2x00dev, "Failed to write Firmware to device\n");
 314                 return status;
 315         }
 316
 317         msleep(10);
 318         rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 319
 320         return 0;
 321 }
 322
 323 /*
 324  * Device state switch handlers.
 325  */
 326 static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
 327 {
 328         u32 reg;
 329
 330         /*
 331          * Wait until BBP and RF are ready.
 332          */
 333         if (rt2800_wait_csr_ready(rt2x00dev))
 334                 return -EBUSY;
 335
 336         rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 337         rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
 338
 339         reg = 0;
 340         rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 341         rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 342         rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 343
 344         rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
 345
 346         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
 347                                     USB_MODE_RESET, REGISTER_TIMEOUT);
 348
 349         rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
 350
 351         return 0;
 352 }
 353
 354 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 355 {
 356         u32 reg;
 357
 358         if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
 359                 return -EIO;
 360
 361         rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 362         rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 363         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
 364         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
 365         /*
 366          * Total room for RX frames in kilobytes, PBF might still exceed
 367          * this limit so reduce the number to prevent errors.
 368          */
 369         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
 370                            ((rt2x00dev->rx->limit * DATA_FRAME_SIZE)
 371                             / 1024) - 3);
 372         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 373         rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 374         rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
 375
 376         return rt2800_enable_radio(rt2x00dev);
 377 }
 378
 379 static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 380 {
 381         rt2800_disable_radio(rt2x00dev);
 382 }
 383
 384 static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 385                                enum dev_state state)
 386 {
 387         if (state == STATE_AWAKE)
 388                 rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
 389         else
 390                 rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
 391
 392         return 0;
 393 }
 394
 395 static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 396                                       enum dev_state state)
 397 {
 398         int retval = 0;
 399
 400         switch (state) {
 401         case STATE_RADIO_ON:
 402                 /*
 403                  * Before the radio can be enabled, the device first has
 404                  * to be woken up. After that it needs a bit of time
 405                  * to be fully awake and then the radio can be enabled.
 406                  */
 407                 rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
 408                 msleep(1);
 409                 retval = rt2800usb_enable_radio(rt2x00dev);
 410                 break;
 411         case STATE_RADIO_OFF:
 412                 /*
 413                  * After the radio has been disabled, the device should
 414                  * be put to sleep for powersaving.
 415                  */
 416                 rt2800usb_disable_radio(rt2x00dev);
 417                 rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
 418                 break;
 419         case STATE_RADIO_IRQ_ON:
 420         case STATE_RADIO_IRQ_OFF:
 421                 /* No support, but no error either */
 422                 break;
 423         case STATE_DEEP_SLEEP:
 424         case STATE_SLEEP:
 425         case STATE_STANDBY:
 426         case STATE_AWAKE:
 427                 retval = rt2800usb_set_state(rt2x00dev, state);
 428                 break;
 429         default:
 430                 retval = -ENOTSUPP;
 431                 break;
 432         }
 433
 434         if (unlikely(retval))
 435                 rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
 436                            state, retval);
 437
 438         return retval;
 439 }
 440
 441 /*
 442  * Watchdog handlers
 443  */
 444 static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev)
 445 {
 446         unsigned int i;
 447         u32 reg;
 448
 449         rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
 450         if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
 451                 rt2x00_warn(rt2x00dev, "TX HW queue 0 timed out, invoke forced kick\n");
 452
 453                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40012);
 454
 455                 for (i = 0; i < 10; i++) {
 456                         udelay(10);
 457                         if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q))
 458                                 break;
 459                 }
 460
 461                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 462         }
 463
 464         rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
 465         if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
 466                 rt2x00_warn(rt2x00dev, "TX HW queue 1 timed out, invoke forced kick\n");
 467
 468                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
 469
 470                 for (i = 0; i < 10; i++) {
 471                         udelay(10);
 472                         if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q))
 473                                 break;
 474                 }
 475
 476                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 477         }
 478
 479         rt2x00usb_watchdog(rt2x00dev);
 480 }
 481
 482 /*
 483  * TX descriptor initialization
 484  */
 485 static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
 486 {
 487         if (entry->queue->qid == QID_BEACON)
 488                 return (__le32 *) (entry->skb->data);
 489         else
 490                 return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
 491 }
 492
 493 static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 494                                     struct txentry_desc *txdesc)
 495 {
 496         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 497         __le32 *txi = (__le32 *) entry->skb->data;
 498         u32 word;
 499
 500         /*
 501          * Initialize TXINFO descriptor
 502          */
 503         rt2x00_desc_read(txi, 0, &word);
 504
 505         /*
 506          * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
 507          * TXWI + 802.11 header + L2 pad + payload + pad,
 508          * so need to decrease size of TXINFO.
 509          */
 510         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
 511                            roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE);
 512         rt2x00_set_field32(&word, TXINFO_W0_WIV,
 513                            !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 514         rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
 515         rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
 516         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
 517         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
 518                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
 519         rt2x00_desc_write(txi, 0, word);
 520
 521         /*
 522          * Register descriptor details in skb frame descriptor.
 523          */
 524         skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 525         skbdesc->desc = txi;
 526         skbdesc->desc_len = TXINFO_DESC_SIZE + entry->queue->winfo_size;
 527 }
 528
 529 /*
 530  * TX data initialization
 531  */
 532 static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 533 {
 534         /*
 535          * pad(1~3 bytes) is needed after each 802.11 payload.
 536          * USB end pad(4 bytes) is needed at each USB bulk out packet end.
 537          * TX frame format is :
 538          * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
 539          *                 |<------------- tx_pkt_len ------------->|
 540          */
 541
 542         return roundup(entry->skb->len, 4) + 4;
 543 }
 544
 545 /*
 546  * TX control handlers
 547  */
 548 static enum txdone_entry_desc_flags
 549 rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
 550 {
 551         __le32 *txwi;
 552         u32 word;
 553         int wcid, ack, pid;
 554         int tx_wcid, tx_ack, tx_pid, is_agg;
 555
 556         /*
 557          * This frames has returned with an IO error,
 558          * so the status report is not intended for this
 559          * frame.
 560          */
 561         if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 562                 return TXDONE_FAILURE;
 563
 564         wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
 565         ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
 566         pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
 567         is_agg  = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
 568
 569         /*
 570          * Validate if this TX status report is intended for
 571          * this entry by comparing the WCID/ACK/PID fields.
 572          */
 573         txwi = rt2800usb_get_txwi(entry);
 574
 575         rt2x00_desc_read(txwi, 1, &word);
 576         tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
 577         tx_ack  = rt2x00_get_field32(word, TXWI_W1_ACK);
 578         tx_pid  = rt2x00_get_field32(word, TXWI_W1_PACKETID);
 579
 580         if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
 581                 rt2x00_dbg(entry->queue->rt2x00dev,
 582                            "TX status report missed for queue %d entry %d\n",
 583                            entry->queue->qid, entry->entry_idx);
 584                 return TXDONE_UNKNOWN;
 585         }
 586
 587         return TXDONE_SUCCESS;
 588 }
 589
 590 static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
 591 {
 592         struct data_queue *queue;
 593         struct queue_entry *entry;
 594         u32 reg;
 595         u8 qid;
 596         enum txdone_entry_desc_flags done_status;
 597
 598         while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
 599                 /*
 600                  * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
 601                  * guaranteed to be one of the TX QIDs .
 602                  */
 603                 qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
 604                 queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
 605
 606                 if (unlikely(rt2x00queue_empty(queue))) {
 607                         rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
 608                                    qid);
 609                         break;
 610                 }
 611
 612                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 613
 614                 if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 615                              !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
 616                         rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n",
 617                                     entry->entry_idx, qid);
 618                         break;
 619                 }
 620
 621                 done_status = rt2800usb_txdone_entry_check(entry, reg);
 622                 if (likely(done_status == TXDONE_SUCCESS))
 623                         rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
 624                 else
 625                         rt2x00lib_txdone_noinfo(entry, done_status);
 626         }
 627 }
 628
 629 static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
 630 {
 631         struct data_queue *queue;
 632         struct queue_entry *entry;
 633
 634         /*
 635          * Process any trailing TX status reports for IO failures,
 636          * we loop until we find the first non-IO error entry. This
 637          * can either be a frame which is free, is being uploaded,
 638          * or has completed the upload but didn't have an entry
 639          * in the TX_STAT_FIFO register yet.
 640          */
 641         tx_queue_for_each(rt2x00dev, queue) {
 642                 while (!rt2x00queue_empty(queue)) {
 643                         entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 644
 645                         if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 646                             !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 647                                 break;
 648
 649                         if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 650                                 rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
 651                         else if (rt2800usb_entry_txstatus_timeout(entry))
 652                                 rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
 653                         else
 654                                 break;
 655                 }
 656         }
 657 }
 658
 659 static void rt2800usb_work_txdone(struct work_struct *work)
 660 {
 661         struct rt2x00_dev *rt2x00dev =
 662             container_of(work, struct rt2x00_dev, txdone_work);
 663
 664         while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
 665                rt2800usb_txstatus_timeout(rt2x00dev)) {
 666
 667                 rt2800usb_txdone(rt2x00dev);
 668
 669                 rt2800usb_txdone_nostatus(rt2x00dev);
 670
 671                 /*
 672                  * The hw may delay sending the packet after DMA complete
 673                  * if the medium is busy, thus the TX_STA_FIFO entry is
 674                  * also delayed -> use a timer to retrieve it.
 675                  */
 676                 if (rt2800usb_txstatus_pending(rt2x00dev))
 677                         rt2800usb_async_read_tx_status(rt2x00dev);
 678         }
 679 }
 680
 681 /*
 682  * RX control handlers
 683  */
 684 static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 685                                   struct rxdone_entry_desc *rxdesc)
 686 {
 687         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 688         __le32 *rxi = (__le32 *)entry->skb->data;
 689         __le32 *rxd;
 690         u32 word;
 691         int rx_pkt_len;
 692
 693         /*
 694          * Copy descriptor to the skbdesc->desc buffer, making it safe from
 695          * moving of frame data in rt2x00usb.
 696          */
 697         memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
 698
 699         /*
 700          * RX frame format is :
 701          * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
 702          *          |<------------ rx_pkt_len -------------->|
 703          */
 704         rt2x00_desc_read(rxi, 0, &word);
 705         rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
 706
 707         /*
 708          * Remove the RXINFO structure from the sbk.
 709          */
 710         skb_pull(entry->skb, RXINFO_DESC_SIZE);
 711
 712         /*
 713          * Check for rx_pkt_len validity. Return if invalid, leaving
 714          * rxdesc->size zeroed out by the upper level.
 715          */
 716         if (unlikely(rx_pkt_len == 0 ||
 717                         rx_pkt_len > entry->queue->data_size)) {
 718                 rt2x00_err(entry->queue->rt2x00dev,
 719                            "Bad frame size %d, forcing to 0\n", rx_pkt_len);
 720                 return;
 721         }
 722
 723         rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 724
 725         /*
 726          * It is now safe to read the descriptor on all architectures.
 727          */
 728         rt2x00_desc_read(rxd, 0, &word);
 729
 730         if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
 731                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 732
 733         rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
 734
 735         if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
 736                 /*
 737                  * Hardware has stripped IV/EIV data from 802.11 frame during
 738                  * decryption. Unfortunately the descriptor doesn't contain
 739                  * any fields with the EIV/IV data either, so they can't
 740                  * be restored by rt2x00lib.
 741                  */
 742                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 743
 744                 /*
 745                  * The hardware has already checked the Michael Mic and has
 746                  * stripped it from the frame. Signal this to mac80211.
 747                  */
 748                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 749
 750                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 751                         rxdesc->flags |= RX_FLAG_DECRYPTED;
 752                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
 753                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 754         }
 755
 756         if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
 757                 rxdesc->dev_flags |= RXDONE_MY_BSS;
 758
 759         if (rt2x00_get_field32(word, RXD_W0_L2PAD))
 760                 rxdesc->dev_flags |= RXDONE_L2PAD;
 761
 762         /*
 763          * Remove RXD descriptor from end of buffer.
 764          */
 765         skb_trim(entry->skb, rx_pkt_len);
 766
 767         /*
 768          * Process the RXWI structure.
 769          */
 770         rt2800_process_rxwi(entry, rxdesc);
 771 }
 772
 773 /*
 774  * Device probe functions.
 775  */
 776 static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
 777 {
 778         int retval;
 779
 780         retval = rt2800usb_autorun_detect(rt2x00dev);
 781         if (retval < 0)
 782                 return retval;
 783         if (retval)
 784                 return 1;
 785         return rt2800_efuse_detect(rt2x00dev);
 786 }
 787
 788 static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
 789 {
 790         int retval;
 791
 792         retval = rt2800usb_efuse_detect(rt2x00dev);
 793         if (retval < 0)
 794                 return retval;
 795         if (retval)
 796                 retval = rt2800_read_eeprom_efuse(rt2x00dev);
 797         else
 798                 retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
 799                                                EEPROM_SIZE);
 800
 801         return retval;
 802 }
 803
 804 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 805 {
 806         int retval;
 807
 808         retval = rt2800_probe_hw(rt2x00dev);
 809         if (retval)
 810                 return retval;
 811
 812         /*
 813          * Set txstatus timer function.
 814          */
 815         rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
 816
 817         /*
 818          * Overwrite TX done handler
 819          */
 820         INIT_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
 821
 822         return 0;
 823 }
 824
 825 static const struct ieee80211_ops rt2800usb_mac80211_ops = {
 826         .tx                     = rt2x00mac_tx,
 827         .start                  = rt2x00mac_start,
 828         .stop                   = rt2x00mac_stop,
 829         .add_interface          = rt2x00mac_add_interface,
 830         .remove_interface       = rt2x00mac_remove_interface,
 831         .config                 = rt2x00mac_config,
 832         .configure_filter       = rt2x00mac_configure_filter,
 833         .set_tim                = rt2x00mac_set_tim,
 834         .set_key                = rt2x00mac_set_key,
 835         .sw_scan_start          = rt2x00mac_sw_scan_start,
 836         .sw_scan_complete       = rt2x00mac_sw_scan_complete,
 837         .get_stats              = rt2x00mac_get_stats,
 838         .get_key_seq            = rt2800_get_key_seq,
 839         .set_rts_threshold      = rt2800_set_rts_threshold,
 840         .sta_add                = rt2x00mac_sta_add,
 841         .sta_remove             = rt2x00mac_sta_remove,
 842         .bss_info_changed       = rt2x00mac_bss_info_changed,
 843         .conf_tx                = rt2800_conf_tx,
 844         .get_tsf                = rt2800_get_tsf,
 845         .rfkill_poll            = rt2x00mac_rfkill_poll,
 846         .ampdu_action           = rt2800_ampdu_action,
 847         .flush                  = rt2x00mac_flush,
 848         .get_survey             = rt2800_get_survey,
 849         .get_ringparam          = rt2x00mac_get_ringparam,
 850         .tx_frames_pending      = rt2x00mac_tx_frames_pending,
 851 };
 852
 853 static const struct rt2800_ops rt2800usb_rt2800_ops = {
 854         .register_read          = rt2x00usb_register_read,
 855         .register_read_lock     = rt2x00usb_register_read_lock,
 856         .register_write         = rt2x00usb_register_write,
 857         .register_write_lock    = rt2x00usb_register_write_lock,
 858         .register_multiread     = rt2x00usb_register_multiread,
 859         .register_multiwrite    = rt2x00usb_register_multiwrite,
 860         .regbusy_read           = rt2x00usb_regbusy_read,
 861         .read_eeprom            = rt2800usb_read_eeprom,
 862         .hwcrypt_disabled       = rt2800usb_hwcrypt_disabled,
 863         .drv_write_firmware     = rt2800usb_write_firmware,
 864         .drv_init_registers     = rt2800usb_init_registers,
 865         .drv_get_txwi           = rt2800usb_get_txwi,
 866 };
 867
 868 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 869         .probe_hw               = rt2800usb_probe_hw,
 870         .get_firmware_name      = rt2800usb_get_firmware_name,
 871         .check_firmware         = rt2800_check_firmware,
 872         .load_firmware          = rt2800_load_firmware,
 873         .initialize             = rt2x00usb_initialize,
 874         .uninitialize           = rt2x00usb_uninitialize,
 875         .clear_entry            = rt2x00usb_clear_entry,
 876         .set_device_state       = rt2800usb_set_device_state,
 877         .rfkill_poll            = rt2800_rfkill_poll,
 878         .link_stats             = rt2800_link_stats,
 879         .reset_tuner            = rt2800_reset_tuner,
 880         .link_tuner             = rt2800_link_tuner,
 881         .gain_calibration       = rt2800_gain_calibration,
 882         .vco_calibration        = rt2800_vco_calibration,
 883         .watchdog               = rt2800usb_watchdog,
 884         .start_queue            = rt2800usb_start_queue,
 885         .kick_queue             = rt2x00usb_kick_queue,
 886         .stop_queue             = rt2800usb_stop_queue,
 887         .flush_queue            = rt2x00usb_flush_queue,
 888         .tx_dma_done            = rt2800usb_tx_dma_done,
 889         .write_tx_desc          = rt2800usb_write_tx_desc,
 890         .write_tx_data          = rt2800_write_tx_data,
 891         .write_beacon           = rt2800_write_beacon,
 892         .clear_beacon           = rt2800_clear_beacon,
 893         .get_tx_data_len        = rt2800usb_get_tx_data_len,
 894         .fill_rxdone            = rt2800usb_fill_rxdone,
 895         .config_shared_key      = rt2800_config_shared_key,
 896         .config_pairwise_key    = rt2800_config_pairwise_key,
 897         .config_filter          = rt2800_config_filter,
 898         .config_intf            = rt2800_config_intf,
 899         .config_erp             = rt2800_config_erp,
 900         .config_ant             = rt2800_config_ant,
 901         .config                 = rt2800_config,
 902         .sta_add                = rt2800_sta_add,
 903         .sta_remove             = rt2800_sta_remove,
 904 };
 905
 906 static void rt2800usb_queue_init(struct data_queue *queue)
 907 {
 908         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 909         unsigned short txwi_size, rxwi_size;
 910
 911         rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
 912
 913         switch (queue->qid) {
 914         case QID_RX:
 915                 queue->limit = 128;
 916                 queue->data_size = AGGREGATION_SIZE;
 917                 queue->desc_size = RXINFO_DESC_SIZE;
 918                 queue->winfo_size = rxwi_size;
 919                 queue->priv_size = sizeof(struct queue_entry_priv_usb);
 920                 break;
 921
 922         case QID_AC_VO:
 923         case QID_AC_VI:
 924         case QID_AC_BE:
 925         case QID_AC_BK:
 926                 queue->limit = 16;
 927                 queue->data_size = AGGREGATION_SIZE;
 928                 queue->desc_size = TXINFO_DESC_SIZE;
 929                 queue->winfo_size = txwi_size;
 930                 queue->priv_size = sizeof(struct queue_entry_priv_usb);
 931                 break;
 932
 933         case QID_BEACON:
 934                 queue->limit = 8;
 935                 queue->data_size = MGMT_FRAME_SIZE;
 936                 queue->desc_size = TXINFO_DESC_SIZE;
 937                 queue->winfo_size = txwi_size;
 938                 queue->priv_size = sizeof(struct queue_entry_priv_usb);
 939                 break;
 940
 941         case QID_ATIM:
 942                 /* fallthrough */
 943         default:
 944                 BUG();
 945                 break;
 946         }
 947 }
 948
 949 static const struct rt2x00_ops rt2800usb_ops = {
 950         .name                   = KBUILD_MODNAME,
 951         .drv_data_size          = sizeof(struct rt2800_drv_data),
 952         .max_ap_intf            = 8,
 953         .eeprom_size            = EEPROM_SIZE,
 954         .rf_size                = RF_SIZE,
 955         .tx_queues              = NUM_TX_QUEUES,
 956         .queue_init             = rt2800usb_queue_init,
 957         .lib                    = &rt2800usb_rt2x00_ops,
 958         .drv                    = &rt2800usb_rt2800_ops,
 959         .hw                     = &rt2800usb_mac80211_ops,
 960 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 961         .debugfs                = &rt2800_rt2x00debug,
 962 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 963 };
 964
 965 /*
 966  * rt2800usb module information.
 967  */
 968 static struct usb_device_id rt2800usb_device_table[] = {
 969         /* Abocom */
 970         { USB_DEVICE(0x07b8, 0x2870) },
 971         { USB_DEVICE(0x07b8, 0x2770) },
 972         { USB_DEVICE(0x07b8, 0x3070) },
 973         { USB_DEVICE(0x07b8, 0x3071) },
 974         { USB_DEVICE(0x07b8, 0x3072) },
 975         { USB_DEVICE(0x1482, 0x3c09) },
 976         /* AirTies */
 977         { USB_DEVICE(0x1eda, 0x2012) },
 978         { USB_DEVICE(0x1eda, 0x2210) },
 979         { USB_DEVICE(0x1eda, 0x2310) },
 980         /* Allwin */
 981         { USB_DEVICE(0x8516, 0x2070) },
 982         { USB_DEVICE(0x8516, 0x2770) },
 983         { USB_DEVICE(0x8516, 0x2870) },
 984         { USB_DEVICE(0x8516, 0x3070) },
 985         { USB_DEVICE(0x8516, 0x3071) },
 986         { USB_DEVICE(0x8516, 0x3072) },
 987         /* Alpha Networks */
 988         { USB_DEVICE(0x14b2, 0x3c06) },
 989         { USB_DEVICE(0x14b2, 0x3c07) },
 990         { USB_DEVICE(0x14b2, 0x3c09) },
 991         { USB_DEVICE(0x14b2, 0x3c12) },
 992         { USB_DEVICE(0x14b2, 0x3c23) },
 993         { USB_DEVICE(0x14b2, 0x3c25) },
 994         { USB_DEVICE(0x14b2, 0x3c27) },
 995         { USB_DEVICE(0x14b2, 0x3c28) },
 996         { USB_DEVICE(0x14b2, 0x3c2c) },
 997         /* Amit */
 998         { USB_DEVICE(0x15c5, 0x0008) },
 999         /* Askey */
1000         { USB_DEVICE(0x1690, 0x0740) },
1001         /* ASUS */
1002         { USB_DEVICE(0x0b05, 0x1731) },
1003         { USB_DEVICE(0x0b05, 0x1732) },
1004         { USB_DEVICE(0x0b05, 0x1742) },
1005         { USB_DEVICE(0x0b05, 0x1784) },
1006         { USB_DEVICE(0x1761, 0x0b05) },
1007         /* AzureWave */
1008         { USB_DEVICE(0x13d3, 0x3247) },
1009         { USB_DEVICE(0x13d3, 0x3273) },
1010         { USB_DEVICE(0x13d3, 0x3305) },
1011         { USB_DEVICE(0x13d3, 0x3307) },
1012         { USB_DEVICE(0x13d3, 0x3321) },
1013         /* Belkin */
1014         { USB_DEVICE(0x050d, 0x8053) },
1015         { USB_DEVICE(0x050d, 0x805c) },
1016         { USB_DEVICE(0x050d, 0x815c) },
1017         { USB_DEVICE(0x050d, 0x825a) },
1018         { USB_DEVICE(0x050d, 0x825b) },
1019         { USB_DEVICE(0x050d, 0x935a) },
1020         { USB_DEVICE(0x050d, 0x935b) },
1021         /* Buffalo */
1022         { USB_DEVICE(0x0411, 0x00e8) },
1023         { USB_DEVICE(0x0411, 0x0158) },
1024         { USB_DEVICE(0x0411, 0x015d) },
1025         { USB_DEVICE(0x0411, 0x016f) },
1026         { USB_DEVICE(0x0411, 0x01a2) },
1027         { USB_DEVICE(0x0411, 0x01ee) },
1028         { USB_DEVICE(0x0411, 0x01a8) },
1029         /* Corega */
1030         { USB_DEVICE(0x07aa, 0x002f) },
1031         { USB_DEVICE(0x07aa, 0x003c) },
1032         { USB_DEVICE(0x07aa, 0x003f) },
1033         { USB_DEVICE(0x18c5, 0x0012) },
1034         /* D-Link */
1035         { USB_DEVICE(0x07d1, 0x3c09) },
1036         { USB_DEVICE(0x07d1, 0x3c0a) },
1037         { USB_DEVICE(0x07d1, 0x3c0d) },
1038         { USB_DEVICE(0x07d1, 0x3c0e) },
1039         { USB_DEVICE(0x07d1, 0x3c0f) },
1040         { USB_DEVICE(0x07d1, 0x3c11) },
1041         { USB_DEVICE(0x07d1, 0x3c13) },
1042         { USB_DEVICE(0x07d1, 0x3c15) },
1043         { USB_DEVICE(0x07d1, 0x3c16) },
1044         { USB_DEVICE(0x07d1, 0x3c17) },
1045         { USB_DEVICE(0x2001, 0x3317) },
1046         { USB_DEVICE(0x2001, 0x3c1b) },
1047         { USB_DEVICE(0x2001, 0x3c25) },
1048         /* Draytek */
1049         { USB_DEVICE(0x07fa, 0x7712) },
1050         /* DVICO */
1051         { USB_DEVICE(0x0fe9, 0xb307) },
1052         /* Edimax */
1053         { USB_DEVICE(0x7392, 0x4085) },
1054         { USB_DEVICE(0x7392, 0x7711) },
1055         { USB_DEVICE(0x7392, 0x7717) },
1056         { USB_DEVICE(0x7392, 0x7718) },
1057         { USB_DEVICE(0x7392, 0x7722) },
1058         /* Encore */
1059         { USB_DEVICE(0x203d, 0x1480) },
1060         { USB_DEVICE(0x203d, 0x14a9) },
1061         /* EnGenius */
1062         { USB_DEVICE(0x1740, 0x9701) },
1063         { USB_DEVICE(0x1740, 0x9702) },
1064         { USB_DEVICE(0x1740, 0x9703) },
1065         { USB_DEVICE(0x1740, 0x9705) },
1066         { USB_DEVICE(0x1740, 0x9706) },
1067         { USB_DEVICE(0x1740, 0x9707) },
1068         { USB_DEVICE(0x1740, 0x9708) },
1069         { USB_DEVICE(0x1740, 0x9709) },
1070         /* Gemtek */
1071         { USB_DEVICE(0x15a9, 0x0012) },
1072         /* Gigabyte */
1073         { USB_DEVICE(0x1044, 0x800b) },
1074         { USB_DEVICE(0x1044, 0x800d) },
1075         /* Hawking */
1076         { USB_DEVICE(0x0e66, 0x0001) },
1077         { USB_DEVICE(0x0e66, 0x0003) },
1078         { USB_DEVICE(0x0e66, 0x0009) },
1079         { USB_DEVICE(0x0e66, 0x000b) },
1080         { USB_DEVICE(0x0e66, 0x0013) },
1081         { USB_DEVICE(0x0e66, 0x0017) },
1082         { USB_DEVICE(0x0e66, 0x0018) },
1083         /* I-O DATA */
1084         { USB_DEVICE(0x04bb, 0x0945) },
1085         { USB_DEVICE(0x04bb, 0x0947) },
1086         { USB_DEVICE(0x04bb, 0x0948) },
1087         /* Linksys */
1088         { USB_DEVICE(0x13b1, 0x0031) },
1089         { USB_DEVICE(0x1737, 0x0070) },
1090         { USB_DEVICE(0x1737, 0x0071) },
1091         { USB_DEVICE(0x1737, 0x0077) },
1092         { USB_DEVICE(0x1737, 0x0078) },
1093         /* Logitec */
1094         { USB_DEVICE(0x0789, 0x0162) },
1095         { USB_DEVICE(0x0789, 0x0163) },
1096         { USB_DEVICE(0x0789, 0x0164) },
1097         { USB_DEVICE(0x0789, 0x0166) },
1098         /* Motorola */
1099         { USB_DEVICE(0x100d, 0x9031) },
1100         /* MSI */
1101         { USB_DEVICE(0x0db0, 0x3820) },
1102         { USB_DEVICE(0x0db0, 0x3821) },
1103         { USB_DEVICE(0x0db0, 0x3822) },
1104         { USB_DEVICE(0x0db0, 0x3870) },
1105         { USB_DEVICE(0x0db0, 0x3871) },
1106         { USB_DEVICE(0x0db0, 0x6899) },
1107         { USB_DEVICE(0x0db0, 0x821a) },
1108         { USB_DEVICE(0x0db0, 0x822a) },
1109         { USB_DEVICE(0x0db0, 0x822b) },
1110         { USB_DEVICE(0x0db0, 0x822c) },
1111         { USB_DEVICE(0x0db0, 0x870a) },
1112         { USB_DEVICE(0x0db0, 0x871a) },
1113         { USB_DEVICE(0x0db0, 0x871b) },
1114         { USB_DEVICE(0x0db0, 0x871c) },
1115         { USB_DEVICE(0x0db0, 0x899a) },
1116         /* Ovislink */
1117         { USB_DEVICE(0x1b75, 0x3070) },
1118         { USB_DEVICE(0x1b75, 0x3071) },
1119         { USB_DEVICE(0x1b75, 0x3072) },
1120         { USB_DEVICE(0x1b75, 0xa200) },
1121         /* Para */
1122         { USB_DEVICE(0x20b8, 0x8888) },
1123         /* Pegatron */
1124         { USB_DEVICE(0x1d4d, 0x0002) },
1125         { USB_DEVICE(0x1d4d, 0x000c) },
1126         { USB_DEVICE(0x1d4d, 0x000e) },
1127         { USB_DEVICE(0x1d4d, 0x0011) },
1128         /* Philips */
1129         { USB_DEVICE(0x0471, 0x200f) },
1130         /* Planex */
1131         { USB_DEVICE(0x2019, 0x5201) },
1132         { USB_DEVICE(0x2019, 0xab25) },
1133         { USB_DEVICE(0x2019, 0xed06) },
1134         /* Quanta */
1135         { USB_DEVICE(0x1a32, 0x0304) },
1136         /* Ralink */
1137         { USB_DEVICE(0x148f, 0x2070) },
1138         { USB_DEVICE(0x148f, 0x2770) },
1139         { USB_DEVICE(0x148f, 0x2870) },
1140         { USB_DEVICE(0x148f, 0x3070) },
1141         { USB_DEVICE(0x148f, 0x3071) },
1142         { USB_DEVICE(0x148f, 0x3072) },
1143         /* Samsung */
1144         { USB_DEVICE(0x04e8, 0x2018) },
1145         /* Siemens */
1146         { USB_DEVICE(0x129b, 0x1828) },
1147         /* Sitecom */
1148         { USB_DEVICE(0x0df6, 0x0017) },
1149         { USB_DEVICE(0x0df6, 0x002b) },
1150         { USB_DEVICE(0x0df6, 0x002c) },
1151         { USB_DEVICE(0x0df6, 0x002d) },
1152         { USB_DEVICE(0x0df6, 0x0039) },
1153         { USB_DEVICE(0x0df6, 0x003b) },
1154         { USB_DEVICE(0x0df6, 0x003d) },
1155         { USB_DEVICE(0x0df6, 0x003e) },
1156         { USB_DEVICE(0x0df6, 0x003f) },
1157         { USB_DEVICE(0x0df6, 0x0040) },
1158         { USB_DEVICE(0x0df6, 0x0042) },
1159         { USB_DEVICE(0x0df6, 0x0047) },
1160         { USB_DEVICE(0x0df6, 0x0048) },
1161         { USB_DEVICE(0x0df6, 0x0051) },
1162         { USB_DEVICE(0x0df6, 0x005f) },
1163         { USB_DEVICE(0x0df6, 0x0060) },
1164         /* SMC */
1165         { USB_DEVICE(0x083a, 0x6618) },
1166         { USB_DEVICE(0x083a, 0x7511) },
1167         { USB_DEVICE(0x083a, 0x7512) },
1168         { USB_DEVICE(0x083a, 0x7522) },
1169         { USB_DEVICE(0x083a, 0x8522) },
1170         { USB_DEVICE(0x083a, 0xa618) },
1171         { USB_DEVICE(0x083a, 0xa701) },
1172         { USB_DEVICE(0x083a, 0xa702) },
1173         { USB_DEVICE(0x083a, 0xa703) },
1174         { USB_DEVICE(0x083a, 0xb522) },
1175         /* Sparklan */
1176         { USB_DEVICE(0x15a9, 0x0006) },
1177         /* Sweex */
1178         { USB_DEVICE(0x177f, 0x0153) },
1179         { USB_DEVICE(0x177f, 0x0164) },
1180         { USB_DEVICE(0x177f, 0x0302) },
1181         { USB_DEVICE(0x177f, 0x0313) },
1182         { USB_DEVICE(0x177f, 0x0323) },
1183         { USB_DEVICE(0x177f, 0x0324) },
1184         /* U-Media */
1185         { USB_DEVICE(0x157e, 0x300e) },
1186         { USB_DEVICE(0x157e, 0x3013) },
1187         /* ZCOM */
1188         { USB_DEVICE(0x0cde, 0x0022) },
1189         { USB_DEVICE(0x0cde, 0x0025) },
1190         /* Zinwell */
1191         { USB_DEVICE(0x5a57, 0x0280) },
1192         { USB_DEVICE(0x5a57, 0x0282) },
1193         { USB_DEVICE(0x5a57, 0x0283) },
1194         { USB_DEVICE(0x5a57, 0x5257) },
1195         /* Zyxel */
1196         { USB_DEVICE(0x0586, 0x3416) },
1197         { USB_DEVICE(0x0586, 0x3418) },
1198         { USB_DEVICE(0x0586, 0x341a) },
1199         { USB_DEVICE(0x0586, 0x341e) },
1200         { USB_DEVICE(0x0586, 0x343e) },
1201 #ifdef CONFIG_RT2800USB_RT33XX
1202         /* Belkin */
1203         { USB_DEVICE(0x050d, 0x945b) },
1204         /* D-Link */
1205         { USB_DEVICE(0x2001, 0x3c17) },
1206         /* Panasonic */
1207         { USB_DEVICE(0x083a, 0xb511) },
1208         /* Philips */
1209         { USB_DEVICE(0x0471, 0x20dd) },
1210         /* Ralink */
1211         { USB_DEVICE(0x148f, 0x3370) },
1212         { USB_DEVICE(0x148f, 0x8070) },
1213         /* Sitecom */
1214         { USB_DEVICE(0x0df6, 0x0050) },
1215         /* Sweex */
1216         { USB_DEVICE(0x177f, 0x0163) },
1217         { USB_DEVICE(0x177f, 0x0165) },
1218 #endif
1219 #ifdef CONFIG_RT2800USB_RT35XX
1220         /* Allwin */
1221         { USB_DEVICE(0x8516, 0x3572) },
1222         /* Askey */
1223         { USB_DEVICE(0x1690, 0x0744) },
1224         { USB_DEVICE(0x1690, 0x0761) },
1225         { USB_DEVICE(0x1690, 0x0764) },
1226         /* ASUS */
1227         { USB_DEVICE(0x0b05, 0x179d) },
1228         /* Cisco */
1229         { USB_DEVICE(0x167b, 0x4001) },
1230         /* EnGenius */
1231         { USB_DEVICE(0x1740, 0x9801) },
1232         /* I-O DATA */
1233         { USB_DEVICE(0x04bb, 0x0944) },
1234         /* Linksys */
1235         { USB_DEVICE(0x13b1, 0x002f) },
1236         { USB_DEVICE(0x1737, 0x0079) },
1237         /* Logitec */
1238         { USB_DEVICE(0x0789, 0x0170) },
1239         /* Ralink */
1240         { USB_DEVICE(0x148f, 0x3572) },
1241         /* Sitecom */
1242         { USB_DEVICE(0x0df6, 0x0041) },
1243         { USB_DEVICE(0x0df6, 0x0062) },
1244         { USB_DEVICE(0x0df6, 0x0065) },
1245         { USB_DEVICE(0x0df6, 0x0066) },
1246         { USB_DEVICE(0x0df6, 0x0068) },
1247         /* Toshiba */
1248         { USB_DEVICE(0x0930, 0x0a07) },
1249         /* Zinwell */
1250         { USB_DEVICE(0x5a57, 0x0284) },
1251 #endif
1252 #ifdef CONFIG_RT2800USB_RT3573
1253         /* AirLive */
1254         { USB_DEVICE(0x1b75, 0x7733) },
1255         /* ASUS */
1256         { USB_DEVICE(0x0b05, 0x17bc) },
1257         { USB_DEVICE(0x0b05, 0x17ad) },
1258         /* Belkin */
1259         { USB_DEVICE(0x050d, 0x1103) },
1260         /* Cameo */
1261         { USB_DEVICE(0x148f, 0xf301) },
1262         /* D-Link */
1263         { USB_DEVICE(0x2001, 0x3c1f) },
1264         /* Edimax */
1265         { USB_DEVICE(0x7392, 0x7733) },
1266         /* Hawking */
1267         { USB_DEVICE(0x0e66, 0x0020) },
1268         { USB_DEVICE(0x0e66, 0x0021) },
1269         /* I-O DATA */
1270         { USB_DEVICE(0x04bb, 0x094e) },
1271         /* Linksys */
1272         { USB_DEVICE(0x13b1, 0x003b) },
1273         /* Logitec */
1274         { USB_DEVICE(0x0789, 0x016b) },
1275         /* NETGEAR */
1276         { USB_DEVICE(0x0846, 0x9012) },
1277         { USB_DEVICE(0x0846, 0x9013) },
1278         { USB_DEVICE(0x0846, 0x9019) },
1279         /* Planex */
1280         { USB_DEVICE(0x2019, 0xed19) },
1281         /* Ralink */
1282         { USB_DEVICE(0x148f, 0x3573) },
1283         /* Sitecom */
1284         { USB_DEVICE(0x0df6, 0x0067) },
1285         { USB_DEVICE(0x0df6, 0x006a) },
1286         { USB_DEVICE(0x0df6, 0x006e) },
1287         /* ZyXEL */
1288         { USB_DEVICE(0x0586, 0x3421) },
1289 #endif
1290 #ifdef CONFIG_RT2800USB_RT53XX
1291         /* Arcadyan */
1292         { USB_DEVICE(0x043e, 0x7a12) },
1293         { USB_DEVICE(0x043e, 0x7a32) },
1294         /* ASUS */
1295         { USB_DEVICE(0x0b05, 0x17e8) },
1296         /* Azurewave */
1297         { USB_DEVICE(0x13d3, 0x3329) },
1298         { USB_DEVICE(0x13d3, 0x3365) },
1299         /* D-Link */
1300         { USB_DEVICE(0x2001, 0x3c15) },
1301         { USB_DEVICE(0x2001, 0x3c19) },
1302         { USB_DEVICE(0x2001, 0x3c1c) },
1303         { USB_DEVICE(0x2001, 0x3c1d) },
1304         { USB_DEVICE(0x2001, 0x3c1e) },
1305         { USB_DEVICE(0x2001, 0x3c20) },
1306         { USB_DEVICE(0x2001, 0x3c22) },
1307         { USB_DEVICE(0x2001, 0x3c23) },
1308         /* LG innotek */
1309         { USB_DEVICE(0x043e, 0x7a22) },
1310         { USB_DEVICE(0x043e, 0x7a42) },
1311         /* Panasonic */
1312         { USB_DEVICE(0x04da, 0x1801) },
1313         { USB_DEVICE(0x04da, 0x1800) },
1314         { USB_DEVICE(0x04da, 0x23f6) },
1315         /* Philips */
1316         { USB_DEVICE(0x0471, 0x2104) },
1317         { USB_DEVICE(0x0471, 0x2126) },
1318         { USB_DEVICE(0x0471, 0x2180) },
1319         { USB_DEVICE(0x0471, 0x2181) },
1320         { USB_DEVICE(0x0471, 0x2182) },
1321         /* Ralink */
1322         { USB_DEVICE(0x148f, 0x5370) },
1323         { USB_DEVICE(0x148f, 0x5372) },
1324 #endif
1325 #ifdef CONFIG_RT2800USB_RT55XX
1326         /* Arcadyan */
1327         { USB_DEVICE(0x043e, 0x7a32) },
1328         /* AVM GmbH */
1329         { USB_DEVICE(0x057c, 0x8501) },
1330         /* Buffalo */
1331         { USB_DEVICE(0x0411, 0x0241) },
1332         { USB_DEVICE(0x0411, 0x0253) },
1333         /* D-Link */
1334         { USB_DEVICE(0x2001, 0x3c1a) },
1335         { USB_DEVICE(0x2001, 0x3c21) },
1336         /* Proware */
1337         { USB_DEVICE(0x043e, 0x7a13) },
1338         /* Ralink */
1339         { USB_DEVICE(0x148f, 0x5572) },
1340         /* TRENDnet */
1341         { USB_DEVICE(0x20f4, 0x724a) },
1342 #endif
1343 #ifdef CONFIG_RT2800USB_UNKNOWN
1344         /*
1345          * Unclear what kind of devices these are (they aren't supported by the
1346          * vendor linux driver).
1347          */
1348         /* Abocom */
1349         { USB_DEVICE(0x07b8, 0x3073) },
1350         { USB_DEVICE(0x07b8, 0x3074) },
1351         /* Alpha Networks */
1352         { USB_DEVICE(0x14b2, 0x3c08) },
1353         { USB_DEVICE(0x14b2, 0x3c11) },
1354         /* Amigo */
1355         { USB_DEVICE(0x0e0b, 0x9031) },
1356         { USB_DEVICE(0x0e0b, 0x9041) },
1357         /* ASUS */
1358         { USB_DEVICE(0x0b05, 0x166a) },
1359         { USB_DEVICE(0x0b05, 0x1760) },
1360         { USB_DEVICE(0x0b05, 0x1761) },
1361         { USB_DEVICE(0x0b05, 0x1790) },
1362         { USB_DEVICE(0x0b05, 0x17a7) },
1363         /* AzureWave */
1364         { USB_DEVICE(0x13d3, 0x3262) },
1365         { USB_DEVICE(0x13d3, 0x3284) },
1366         { USB_DEVICE(0x13d3, 0x3322) },
1367         { USB_DEVICE(0x13d3, 0x3340) },
1368         { USB_DEVICE(0x13d3, 0x3399) },
1369         { USB_DEVICE(0x13d3, 0x3400) },
1370         { USB_DEVICE(0x13d3, 0x3401) },
1371         /* Belkin */
1372         { USB_DEVICE(0x050d, 0x1003) },
1373         /* Buffalo */
1374         { USB_DEVICE(0x0411, 0x012e) },
1375         { USB_DEVICE(0x0411, 0x0148) },
1376         { USB_DEVICE(0x0411, 0x0150) },
1377         /* Corega */
1378         { USB_DEVICE(0x07aa, 0x0041) },
1379         { USB_DEVICE(0x07aa, 0x0042) },
1380         { USB_DEVICE(0x18c5, 0x0008) },
1381         /* D-Link */
1382         { USB_DEVICE(0x07d1, 0x3c0b) },
1383         /* Encore */
1384         { USB_DEVICE(0x203d, 0x14a1) },
1385         /* EnGenius */
1386         { USB_DEVICE(0x1740, 0x0600) },
1387         { USB_DEVICE(0x1740, 0x0602) },
1388         /* Gemtek */
1389         { USB_DEVICE(0x15a9, 0x0010) },
1390         /* Gigabyte */
1391         { USB_DEVICE(0x1044, 0x800c) },
1392         /* Hercules */
1393         { USB_DEVICE(0x06f8, 0xe036) },
1394         /* Huawei */
1395         { USB_DEVICE(0x148f, 0xf101) },
1396         /* I-O DATA */
1397         { USB_DEVICE(0x04bb, 0x094b) },
1398         /* LevelOne */
1399         { USB_DEVICE(0x1740, 0x0605) },
1400         { USB_DEVICE(0x1740, 0x0615) },
1401         /* Logitec */
1402         { USB_DEVICE(0x0789, 0x0168) },
1403         { USB_DEVICE(0x0789, 0x0169) },
1404         /* Motorola */
1405         { USB_DEVICE(0x100d, 0x9032) },
1406         /* Pegatron */
1407         { USB_DEVICE(0x05a6, 0x0101) },
1408         { USB_DEVICE(0x1d4d, 0x0010) },
1409         /* Planex */
1410         { USB_DEVICE(0x2019, 0xab24) },
1411         { USB_DEVICE(0x2019, 0xab29) },
1412         /* Qcom */
1413         { USB_DEVICE(0x18e8, 0x6259) },
1414         /* RadioShack */
1415         { USB_DEVICE(0x08b9, 0x1197) },
1416         /* Sitecom */
1417         { USB_DEVICE(0x0df6, 0x003c) },
1418         { USB_DEVICE(0x0df6, 0x004a) },
1419         { USB_DEVICE(0x0df6, 0x004d) },
1420         { USB_DEVICE(0x0df6, 0x0053) },
1421         { USB_DEVICE(0x0df6, 0x0069) },
1422         { USB_DEVICE(0x0df6, 0x006f) },
1423         { USB_DEVICE(0x0df6, 0x0078) },
1424         /* SMC */
1425         { USB_DEVICE(0x083a, 0xa512) },
1426         { USB_DEVICE(0x083a, 0xc522) },
1427         { USB_DEVICE(0x083a, 0xd522) },
1428         { USB_DEVICE(0x083a, 0xf511) },
1429         /* Sweex */
1430         { USB_DEVICE(0x177f, 0x0254) },
1431         /* TP-LINK */
1432         { USB_DEVICE(0xf201, 0x5370) },
1433 #endif
1434         { 0, }
1435 };
1436
1437 MODULE_AUTHOR(DRV_PROJECT);
1438 MODULE_VERSION(DRV_VERSION);
1439 MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
1440 MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
1441 MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
1442 MODULE_FIRMWARE(FIRMWARE_RT2870);
1443 MODULE_LICENSE("GPL");
1444
1445 static int rt2800usb_probe(struct usb_interface *usb_intf,
1446                            const struct usb_device_id *id)
1447 {
1448         return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
1449 }
1450
1451 static struct usb_driver rt2800usb_driver = {
1452         .name           = KBUILD_MODNAME,
1453         .id_table       = rt2800usb_device_table,
1454         .probe          = rt2800usb_probe,
1455         .disconnect     = rt2x00usb_disconnect,
1456         .suspend        = rt2x00usb_suspend,
1457         .resume         = rt2x00usb_resume,
1458         .reset_resume   = rt2x00usb_resume,
1459         .disable_hub_initiated_lpm = 1,
1460 };
1461
1462 module_usb_driver(rt2800usb_driver);