drivers/net/wireless/rtlwifi/rtl8821ae/sw.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2009-2010  Realtek Corporation.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * The full GNU General Public License is included in this distribution in the
  15  * file called LICENSE.
  16  *
  17  * Contact Information:
  18  * wlanfae <wlanfae@realtek.com>
  19  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  20  * Hsinchu 300, Taiwan.
  21  *
  22  * Larry Finger <Larry.Finger@lwfinger.net>
  23  *
  24  *****************************************************************************/
  25
  26 #include "../wifi.h"
  27 #include "../core.h"
  28 #include "../pci.h"
  29 #include "reg.h"
  30 #include "def.h"
  31 #include "phy.h"
  32 #include "dm.h"
  33 #include "hw.h"
  34 #include "fw.h"
  35 #include "sw.h"
  36 #include "trx.h"
  37 #include "led.h"
  38 #include "table.h"
  39 #include "../btcoexist/rtl_btc.h"
  40
  41 #include <linux/vmalloc.h>
  42 #include <linux/module.h>
  43
  44 static void rtl8821ae_init_aspm_vars(struct ieee80211_hw *hw)
  45 {
  46         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  47
  48         /*close ASPM for AMD defaultly */
  49         rtlpci->const_amdpci_aspm = 0;
  50
  51         /**
  52          * ASPM PS mode.
  53          * 0 - Disable ASPM,
  54          * 1 - Enable ASPM without Clock Req,
  55          * 2 - Enable ASPM with Clock Req,
  56          * 3 - Alwyas Enable ASPM with Clock Req,
  57          * 4 - Always Enable ASPM without Clock Req.
  58          * set defult to RTL8192CE:3 RTL8192E:2
  59          */
  60         rtlpci->const_pci_aspm = 3;
  61
  62         /*Setting for PCI-E device */
  63         rtlpci->const_devicepci_aspm_setting = 0x03;
  64
  65         /*Setting for PCI-E bridge */
  66         rtlpci->const_hostpci_aspm_setting = 0x02;
  67
  68         /**
  69          * In Hw/Sw Radio Off situation.
  70          * 0 - Default,
  71          * 1 - From ASPM setting without low Mac Pwr,
  72          * 2 - From ASPM setting with low Mac Pwr,
  73          * 3 - Bus D3
  74          * set default to RTL8192CE:0 RTL8192SE:2
  75          */
  76         rtlpci->const_hwsw_rfoff_d3 = 0;
  77
  78         /**
  79          * This setting works for those device with
  80          * backdoor ASPM setting such as EPHY setting.
  81          * 0 - Not support ASPM,
  82          * 1 - Support ASPM,
  83          * 2 - According to chipset.
  84          */
  85         rtlpci->const_support_pciaspm = 1;
  86 }
  87
  88 /*InitializeVariables8812E*/
  89 int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
  90 {
  91         int err = 0;
  92         struct rtl_priv *rtlpriv = rtl_priv(hw);
  93         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  94         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
  95         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
  96
  97         rtl8821ae_bt_reg_init(hw);
  98         rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
  99         rtlpci->int_clear = rtlpriv->cfg->mod_params->int_clear;
 100         rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
 101
 102         rtlpriv->dm.dm_initialgain_enable = 1;
 103         rtlpriv->dm.dm_flag = 0;
 104         rtlpriv->dm.disable_framebursting = 0;
 105         rtlpriv->dm.thermalvalue = 0;
 106         rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
 107
 108         mac->ht_enable = true;
 109         mac->ht_cur_stbc = 0;
 110         mac->ht_stbc_cap = 0;
 111         mac->vht_cur_ldpc = 0;
 112         mac->vht_ldpc_cap = 0;
 113         mac->vht_cur_stbc = 0;
 114         mac->vht_stbc_cap = 0;
 115
 116         rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
 117         /*following 2 is for register 5G band, refer to _rtl_init_mac80211()*/
 118         rtlpriv->rtlhal.bandset = BAND_ON_BOTH;
 119         rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
 120
 121         rtlpci->receive_config = (RCR_APPFCS    |
 122                                 RCR_APP_MIC             |
 123                                 RCR_APP_ICV             |
 124                                 RCR_APP_PHYST_RXFF      |
 125                                 RCR_NONQOS_VHT          |
 126                                 RCR_HTC_LOC_CTRL        |
 127                                 RCR_AMF                 |
 128                                 RCR_ACF                 |
 129                         /*This bit controls the PS-Poll packet filter.*/
 130                                 RCR_ADF                 |
 131                                 RCR_AICV                |
 132                                 RCR_ACRC32              |
 133                                 RCR_AB                  |
 134                                 RCR_AM                  |
 135                                 RCR_APM                 |
 136                                 0);
 137
 138         rtlpci->irq_mask[0] =
 139              (u32)(IMR_PSTIMEOUT                        |
 140                                 IMR_GTINT3              |
 141                                 IMR_HSISR_IND_ON_INT    |
 142                                 IMR_C2HCMD              |
 143                                 IMR_HIGHDOK             |
 144                                 IMR_MGNTDOK             |
 145                                 IMR_BKDOK               |
 146                                 IMR_BEDOK               |
 147                                 IMR_VIDOK               |
 148                                 IMR_VODOK               |
 149                                 IMR_RDU                 |
 150                                 IMR_ROK                 |
 151                                 0);
 152
 153         rtlpci->irq_mask[1]     =
 154                  (u32)(IMR_RXFOVW |
 155                                 IMR_TXFOVW |
 156                                 0);
 157         rtlpci->sys_irq_mask = (u32)(HSIMR_PDN_INT_EN   |
 158                                       HSIMR_RON_INT_EN  |
 159                                       0);
 160         /* for WOWLAN */
 161         rtlpriv->psc.wo_wlan_mode = WAKE_ON_MAGIC_PACKET |
 162                                     WAKE_ON_PATTERN_MATCH;
 163
 164         /* for debug level */
 165         rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
 166         /* for LPS & IPS */
 167         rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
 168         rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
 169         rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
 170         rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
 171         rtlpci->msi_support = rtlpriv->cfg->mod_params->int_clear;
 172         if (rtlpriv->cfg->mod_params->disable_watchdog)
 173                 pr_info("watchdog disabled\n");
 174         rtlpriv->psc.reg_fwctrl_lps = 3;
 175         rtlpriv->psc.reg_max_lps_awakeintvl = 5;
 176         rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
 177
 178         /* for ASPM, you can close aspm through
 179          * set const_support_pciaspm = 0
 180          */
 181         rtl8821ae_init_aspm_vars(hw);
 182
 183         if (rtlpriv->psc.reg_fwctrl_lps == 1)
 184                 rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
 185         else if (rtlpriv->psc.reg_fwctrl_lps == 2)
 186                 rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
 187         else if (rtlpriv->psc.reg_fwctrl_lps == 3)
 188                 rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
 189
 190         /* for firmware buf */
 191         rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
 192         if (!rtlpriv->rtlhal.pfirmware) {
 193                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 194                          "Can't alloc buffer for fw.\n");
 195                 return 1;
 196         }
 197         rtlpriv->rtlhal.wowlan_firmware = vzalloc(0x8000);
 198         if (!rtlpriv->rtlhal.wowlan_firmware) {
 199                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 200                          "Can't alloc buffer for wowlan fw.\n");
 201                 return 1;
 202         }
 203
 204         if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
 205                 rtlpriv->cfg->fw_name = "rtlwifi/rtl8812aefw.bin";
 206                 rtlpriv->cfg->wowlan_fw_name = "rtlwifi/rtl8812aefw_wowlan.bin";
 207         } else {
 208                 rtlpriv->cfg->fw_name = "rtlwifi/rtl8821aefw.bin";
 209                 rtlpriv->cfg->wowlan_fw_name = "rtlwifi/rtl8821aefw_wowlan.bin";
 210         }
 211
 212         rtlpriv->max_fw_size = 0x8000;
 213         /*load normal firmware*/
 214         pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
 215         err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
 216                                       rtlpriv->io.dev, GFP_KERNEL, hw,
 217                                       rtl_fw_cb);
 218         if (err) {
 219                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 220                          "Failed to request normal firmware!\n");
 221                 return 1;
 222         }
 223         /*load wowlan firmware*/
 224         pr_info("Using firmware %s\n", rtlpriv->cfg->wowlan_fw_name);
 225         err = request_firmware_nowait(THIS_MODULE, 1,
 226                                       rtlpriv->cfg->wowlan_fw_name,
 227                                       rtlpriv->io.dev, GFP_KERNEL, hw,
 228                                       rtl_wowlan_fw_cb);
 229         if (err) {
 230                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 231                          "Failed to request wowlan firmware!\n");
 232                 return 1;
 233         }
 234         return 0;
 235 }
 236
 237 void rtl8821ae_deinit_sw_vars(struct ieee80211_hw *hw)
 238 {
 239         struct rtl_priv *rtlpriv = rtl_priv(hw);
 240
 241         if (rtlpriv->rtlhal.pfirmware) {
 242                 vfree(rtlpriv->rtlhal.pfirmware);
 243                 rtlpriv->rtlhal.pfirmware = NULL;
 244         }
 245 #if (USE_SPECIFIC_FW_TO_SUPPORT_WOWLAN == 1)
 246         if (rtlpriv->rtlhal.wowlan_firmware) {
 247                 vfree(rtlpriv->rtlhal.wowlan_firmware);
 248                 rtlpriv->rtlhal.wowlan_firmware = NULL;
 249         }
 250 #endif
 251 }
 252
 253 /* get bt coexist status */
 254 bool rtl8821ae_get_btc_status(void)
 255 {
 256         return true;
 257 }
 258
 259 static struct rtl_hal_ops rtl8821ae_hal_ops = {
 260         .init_sw_vars = rtl8821ae_init_sw_vars,
 261         .deinit_sw_vars = rtl8821ae_deinit_sw_vars,
 262         .read_eeprom_info = rtl8821ae_read_eeprom_info,
 263         .interrupt_recognized = rtl8821ae_interrupt_recognized,
 264         .hw_init = rtl8821ae_hw_init,
 265         .hw_disable = rtl8821ae_card_disable,
 266         .hw_suspend = rtl8821ae_suspend,
 267         .hw_resume = rtl8821ae_resume,
 268         .enable_interrupt = rtl8821ae_enable_interrupt,
 269         .disable_interrupt = rtl8821ae_disable_interrupt,
 270         .set_network_type = rtl8821ae_set_network_type,
 271         .set_chk_bssid = rtl8821ae_set_check_bssid,
 272         .set_qos = rtl8821ae_set_qos,
 273         .set_bcn_reg = rtl8821ae_set_beacon_related_registers,
 274         .set_bcn_intv = rtl8821ae_set_beacon_interval,
 275         .update_interrupt_mask = rtl8821ae_update_interrupt_mask,
 276         .get_hw_reg = rtl8821ae_get_hw_reg,
 277         .set_hw_reg = rtl8821ae_set_hw_reg,
 278         .update_rate_tbl = rtl8821ae_update_hal_rate_tbl,
 279         .fill_tx_desc = rtl8821ae_tx_fill_desc,
 280         .fill_tx_cmddesc = rtl8821ae_tx_fill_cmddesc,
 281         .query_rx_desc = rtl8821ae_rx_query_desc,
 282         .set_channel_access = rtl8821ae_update_channel_access_setting,
 283         .radio_onoff_checking = rtl8821ae_gpio_radio_on_off_checking,
 284         .set_bw_mode = rtl8821ae_phy_set_bw_mode,
 285         .switch_channel = rtl8821ae_phy_sw_chnl,
 286         .dm_watchdog = rtl8821ae_dm_watchdog,
 287         .scan_operation_backup = rtl8821ae_phy_scan_operation_backup,
 288         .set_rf_power_state = rtl8821ae_phy_set_rf_power_state,
 289         .led_control = rtl8821ae_led_control,
 290         .set_desc = rtl8821ae_set_desc,
 291         .get_desc = rtl8821ae_get_desc,
 292         .is_tx_desc_closed = rtl8821ae_is_tx_desc_closed,
 293         .tx_polling = rtl8821ae_tx_polling,
 294         .enable_hw_sec = rtl8821ae_enable_hw_security_config,
 295         .set_key = rtl8821ae_set_key,
 296         .init_sw_leds = rtl8821ae_init_sw_leds,
 297         .get_bbreg = rtl8821ae_phy_query_bb_reg,
 298         .set_bbreg = rtl8821ae_phy_set_bb_reg,
 299         .get_rfreg = rtl8821ae_phy_query_rf_reg,
 300         .set_rfreg = rtl8821ae_phy_set_rf_reg,
 301         .fill_h2c_cmd = rtl8821ae_fill_h2c_cmd,
 302         .get_btc_status = rtl8821ae_get_btc_status,
 303         .rx_command_packet = rtl8821ae_rx_command_packet,
 304         .add_wowlan_pattern = rtl8821ae_add_wowlan_pattern,
 305 };
 306
 307 static struct rtl_mod_params rtl8821ae_mod_params = {
 308         .sw_crypto = false,
 309         .inactiveps = true,
 310         .swctrl_lps = false,
 311         .fwctrl_lps = true,
 312         .msi_support = true,
 313         .int_clear = true,
 314         .debug = DBG_EMERG,
 315         .disable_watchdog = 0,
 316 };
 317
 318 static struct rtl_hal_cfg rtl8821ae_hal_cfg = {
 319         .bar_id = 2,
 320         .write_readback = true,
 321         .name = "rtl8821ae_pci",
 322         .fw_name = "rtlwifi/rtl8821aefw.bin",
 323         .ops = &rtl8821ae_hal_ops,
 324         .mod_params = &rtl8821ae_mod_params,
 325         .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
 326         .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
 327         .maps[SYS_CLK] = REG_SYS_CLKR,
 328         .maps[MAC_RCR_AM] = AM,
 329         .maps[MAC_RCR_AB] = AB,
 330         .maps[MAC_RCR_ACRC32] = ACRC32,
 331         .maps[MAC_RCR_ACF] = ACF,
 332         .maps[MAC_RCR_AAP] = AAP,
 333         .maps[MAC_HIMR] = REG_HIMR,
 334         .maps[MAC_HIMRE] = REG_HIMRE,
 335
 336         .maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
 337
 338         .maps[EFUSE_TEST] = REG_EFUSE_TEST,
 339         .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
 340         .maps[EFUSE_CLK] = 0,
 341         .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
 342         .maps[EFUSE_PWC_EV12V] = PWC_EV12V,
 343         .maps[EFUSE_FEN_ELDR] = FEN_ELDR,
 344         .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
 345         .maps[EFUSE_ANA8M] = ANA8M,
 346         .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
 347         .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
 348         .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
 349         .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
 350
 351         .maps[RWCAM] = REG_CAMCMD,
 352         .maps[WCAMI] = REG_CAMWRITE,
 353         .maps[RCAMO] = REG_CAMREAD,
 354         .maps[CAMDBG] = REG_CAMDBG,
 355         .maps[SECR] = REG_SECCFG,
 356         .maps[SEC_CAM_NONE] = CAM_NONE,
 357         .maps[SEC_CAM_WEP40] = CAM_WEP40,
 358         .maps[SEC_CAM_TKIP] = CAM_TKIP,
 359         .maps[SEC_CAM_AES] = CAM_AES,
 360         .maps[SEC_CAM_WEP104] = CAM_WEP104,
 361
 362         .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
 363         .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
 364         .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
 365         .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
 366         .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
 367         .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
 368 /*      .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,     */   /*need check*/
 369         .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
 370         .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
 371         .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
 372         .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
 373         .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
 374         .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
 375         .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
 376 /*      .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/
 377 /*      .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/
 378
 379         .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
 380         .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
 381         .maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
 382         .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
 383         .maps[RTL_IMR_RDU] = IMR_RDU,
 384         .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
 385         .maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
 386         .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
 387         .maps[RTL_IMR_TBDER] = IMR_TBDER,
 388         .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
 389         .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
 390         .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
 391         .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
 392         .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
 393         .maps[RTL_IMR_VODOK] = IMR_VODOK,
 394         .maps[RTL_IMR_ROK] = IMR_ROK,
 395         .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
 396
 397         .maps[RTL_RC_CCK_RATE1M] = DESC_RATE1M,
 398         .maps[RTL_RC_CCK_RATE2M] =  DESC_RATE2M,
 399         .maps[RTL_RC_CCK_RATE5_5M] =  DESC_RATE5_5M,
 400         .maps[RTL_RC_CCK_RATE11M] =  DESC_RATE11M,
 401         .maps[RTL_RC_OFDM_RATE6M] =  DESC_RATE6M,
 402         .maps[RTL_RC_OFDM_RATE9M] =  DESC_RATE9M,
 403         .maps[RTL_RC_OFDM_RATE12M] =  DESC_RATE12M,
 404         .maps[RTL_RC_OFDM_RATE18M] =  DESC_RATE18M,
 405         .maps[RTL_RC_OFDM_RATE24M] =  DESC_RATE24M,
 406         .maps[RTL_RC_OFDM_RATE36M] =  DESC_RATE36M,
 407         .maps[RTL_RC_OFDM_RATE48M] =  DESC_RATE48M,
 408         .maps[RTL_RC_OFDM_RATE54M] =  DESC_RATE54M,
 409
 410         .maps[RTL_RC_HT_RATEMCS7] =  DESC_RATEMCS7,
 411         .maps[RTL_RC_HT_RATEMCS15] =  DESC_RATEMCS15,
 412
 413         /*VHT hightest rate*/
 414         .maps[RTL_RC_VHT_RATE_1SS_MCS7] = DESC_RATEVHT1SS_MCS7,
 415         .maps[RTL_RC_VHT_RATE_1SS_MCS8] = DESC_RATEVHT1SS_MCS8,
 416         .maps[RTL_RC_VHT_RATE_1SS_MCS9] = DESC_RATEVHT1SS_MCS9,
 417         .maps[RTL_RC_VHT_RATE_2SS_MCS7] = DESC_RATEVHT2SS_MCS7,
 418         .maps[RTL_RC_VHT_RATE_2SS_MCS8] = DESC_RATEVHT2SS_MCS8,
 419         .maps[RTL_RC_VHT_RATE_2SS_MCS9] = DESC_RATEVHT2SS_MCS9,
 420 };
 421
 422 static struct pci_device_id rtl8821ae_pci_ids[] = {
 423         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8812, rtl8821ae_hal_cfg)},
 424         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8821, rtl8821ae_hal_cfg)},
 425         {},
 426 };
 427
 428 MODULE_DEVICE_TABLE(pci, rtl8821ae_pci_ids);
 429
 430 MODULE_AUTHOR("Realtek WlanFAE  <wlanfae@realtek.com>");
 431 MODULE_LICENSE("GPL");
 432 MODULE_DESCRIPTION("Realtek 8821ae 802.11ac PCI wireless");
 433 MODULE_FIRMWARE("rtlwifi/rtl8821aefw.bin");
 434
 435 module_param_named(swenc, rtl8821ae_mod_params.sw_crypto, bool, 0444);
 436 module_param_named(debug, rtl8821ae_mod_params.debug, int, 0444);
 437 module_param_named(ips, rtl8821ae_mod_params.inactiveps, bool, 0444);
 438 module_param_named(swlps, rtl8821ae_mod_params.swctrl_lps, bool, 0444);
 439 module_param_named(fwlps, rtl8821ae_mod_params.fwctrl_lps, bool, 0444);
 440 module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
 441 module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
 442                    bool, 0444);
 443 module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
 444 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
 445 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
 446 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
 447 MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
 448 MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
 449 MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
 450 MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
 451 MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
 452
 453 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
 454
 455 static struct pci_driver rtl8821ae_driver = {
 456         .name = KBUILD_MODNAME,
 457         .id_table = rtl8821ae_pci_ids,
 458         .probe = rtl_pci_probe,
 459         .remove = rtl_pci_disconnect,
 460         .driver.pm = &rtlwifi_pm_ops,
 461 };
 462
 463 module_pci_driver(rtl8821ae_driver);