drivers/thermal/samsung/exynos_tmu.c

   1 /*
   2  * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
   3  *
   4  *  Copyright (C) 2014 Samsung Electronics
   5  *  Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
   6  *  Lukasz Majewski <l.majewski@samsung.com>
   7  *
   8  *  Copyright (C) 2011 Samsung Electronics
   9  *  Donggeun Kim <dg77.kim@samsung.com>
  10  *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  25  *
  26  */
  27
  28 #include <linux/clk.h>
  29 #include <linux/io.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/module.h>
  32 #include <linux/of.h>
  33 #include <linux/of_address.h>
  34 #include <linux/of_irq.h>
  35 #include <linux/platform_device.h>
  36 #include <linux/regulator/consumer.h>
  37
  38 #include "exynos_tmu.h"
  39 #include "../thermal_core.h"
  40
  41 /* Exynos generic registers */
  42 #define EXYNOS_TMU_REG_TRIMINFO         0x0
  43 #define EXYNOS_TMU_REG_CONTROL          0x20
  44 #define EXYNOS_TMU_REG_STATUS           0x28
  45 #define EXYNOS_TMU_REG_CURRENT_TEMP     0x40
  46 #define EXYNOS_TMU_REG_INTEN            0x70
  47 #define EXYNOS_TMU_REG_INTSTAT          0x74
  48 #define EXYNOS_TMU_REG_INTCLEAR         0x78
  49
  50 #define EXYNOS_TMU_TEMP_MASK            0xff
  51 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT    24
  52 #define EXYNOS_TMU_REF_VOLTAGE_MASK     0x1f
  53 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK   0xf
  54 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT  8
  55 #define EXYNOS_TMU_CORE_EN_SHIFT        0
  56
  57 /* Exynos3250 specific registers */
  58 #define EXYNOS_TMU_TRIMINFO_CON1        0x10
  59
  60 /* Exynos4210 specific registers */
  61 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP       0x44
  62 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0  0x50
  63
  64 /* Exynos5250, Exynos4412, Exynos3250 specific registers */
  65 #define EXYNOS_TMU_TRIMINFO_CON2        0x14
  66 #define EXYNOS_THD_TEMP_RISE            0x50
  67 #define EXYNOS_THD_TEMP_FALL            0x54
  68 #define EXYNOS_EMUL_CON         0x80
  69
  70 #define EXYNOS_TRIMINFO_RELOAD_ENABLE   1
  71 #define EXYNOS_TRIMINFO_25_SHIFT        0
  72 #define EXYNOS_TRIMINFO_85_SHIFT        8
  73 #define EXYNOS_TMU_TRIP_MODE_SHIFT      13
  74 #define EXYNOS_TMU_TRIP_MODE_MASK       0x7
  75 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT  12
  76
  77 #define EXYNOS_TMU_INTEN_RISE0_SHIFT    0
  78 #define EXYNOS_TMU_INTEN_RISE1_SHIFT    4
  79 #define EXYNOS_TMU_INTEN_RISE2_SHIFT    8
  80 #define EXYNOS_TMU_INTEN_RISE3_SHIFT    12
  81 #define EXYNOS_TMU_INTEN_FALL0_SHIFT    16
  82
  83 #define EXYNOS_EMUL_TIME        0x57F0
  84 #define EXYNOS_EMUL_TIME_MASK   0xffff
  85 #define EXYNOS_EMUL_TIME_SHIFT  16
  86 #define EXYNOS_EMUL_DATA_SHIFT  8
  87 #define EXYNOS_EMUL_DATA_MASK   0xFF
  88 #define EXYNOS_EMUL_ENABLE      0x1
  89
  90 /* Exynos5260 specific */
  91 #define EXYNOS5260_TMU_REG_INTEN                0xC0
  92 #define EXYNOS5260_TMU_REG_INTSTAT              0xC4
  93 #define EXYNOS5260_TMU_REG_INTCLEAR             0xC8
  94 #define EXYNOS5260_EMUL_CON                     0x100
  95
  96 /* Exynos4412 specific */
  97 #define EXYNOS4412_MUX_ADDR_VALUE          6
  98 #define EXYNOS4412_MUX_ADDR_SHIFT          20
  99
 100 /* Exynos5433 specific registers */
 101 #define EXYNOS5433_TMU_REG_CONTROL1             0x024
 102 #define EXYNOS5433_TMU_SAMPLING_INTERVAL        0x02c
 103 #define EXYNOS5433_TMU_COUNTER_VALUE0           0x030
 104 #define EXYNOS5433_TMU_COUNTER_VALUE1           0x034
 105 #define EXYNOS5433_TMU_REG_CURRENT_TEMP1        0x044
 106 #define EXYNOS5433_THD_TEMP_RISE3_0             0x050
 107 #define EXYNOS5433_THD_TEMP_RISE7_4             0x054
 108 #define EXYNOS5433_THD_TEMP_FALL3_0             0x060
 109 #define EXYNOS5433_THD_TEMP_FALL7_4             0x064
 110 #define EXYNOS5433_TMU_REG_INTEN                0x0c0
 111 #define EXYNOS5433_TMU_REG_INTPEND              0x0c8
 112 #define EXYNOS5433_TMU_EMUL_CON                 0x110
 113 #define EXYNOS5433_TMU_PD_DET_EN                0x130
 114
 115 #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT     16
 116 #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT     23
 117 #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK      \
 118                         (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
 119 #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK      BIT(23)
 120
 121 #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING  0
 122 #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING  1
 123
 124 #define EXYNOS5433_PD_DET_EN                    1
 125
 126 /*exynos5440 specific registers*/
 127 #define EXYNOS5440_TMU_S0_7_TRIM                0x000
 128 #define EXYNOS5440_TMU_S0_7_CTRL                0x020
 129 #define EXYNOS5440_TMU_S0_7_DEBUG               0x040
 130 #define EXYNOS5440_TMU_S0_7_TEMP                0x0f0
 131 #define EXYNOS5440_TMU_S0_7_TH0                 0x110
 132 #define EXYNOS5440_TMU_S0_7_TH1                 0x130
 133 #define EXYNOS5440_TMU_S0_7_TH2                 0x150
 134 #define EXYNOS5440_TMU_S0_7_IRQEN               0x210
 135 #define EXYNOS5440_TMU_S0_7_IRQ                 0x230
 136 /* exynos5440 common registers */
 137 #define EXYNOS5440_TMU_IRQ_STATUS               0x000
 138 #define EXYNOS5440_TMU_PMIN                     0x004
 139
 140 #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT        0
 141 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT        1
 142 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT        2
 143 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT        3
 144 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT        4
 145 #define EXYNOS5440_TMU_TH_RISE4_SHIFT           24
 146 #define EXYNOS5440_EFUSE_SWAP_OFFSET            8
 147
 148 /* Exynos7 specific registers */
 149 #define EXYNOS7_THD_TEMP_RISE7_6                0x50
 150 #define EXYNOS7_THD_TEMP_FALL7_6                0x60
 151 #define EXYNOS7_TMU_REG_INTEN                   0x110
 152 #define EXYNOS7_TMU_REG_INTPEND                 0x118
 153 #define EXYNOS7_TMU_REG_EMUL_CON                0x160
 154
 155 #define EXYNOS7_TMU_TEMP_MASK                   0x1ff
 156 #define EXYNOS7_PD_DET_EN_SHIFT                 23
 157 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT           0
 158 #define EXYNOS7_TMU_INTEN_RISE1_SHIFT           1
 159 #define EXYNOS7_TMU_INTEN_RISE2_SHIFT           2
 160 #define EXYNOS7_TMU_INTEN_RISE3_SHIFT           3
 161 #define EXYNOS7_TMU_INTEN_RISE4_SHIFT           4
 162 #define EXYNOS7_TMU_INTEN_RISE5_SHIFT           5
 163 #define EXYNOS7_TMU_INTEN_RISE6_SHIFT           6
 164 #define EXYNOS7_TMU_INTEN_RISE7_SHIFT           7
 165 #define EXYNOS7_EMUL_DATA_SHIFT                 7
 166 #define EXYNOS7_EMUL_DATA_MASK                  0x1ff
 167
 168 #define MCELSIUS        1000
 169 /**
 170  * struct exynos_tmu_data : A structure to hold the private data of the TMU
 171         driver
 172  * @id: identifier of the one instance of the TMU controller.
 173  * @pdata: pointer to the tmu platform/configuration data
 174  * @base: base address of the single instance of the TMU controller.
 175  * @base_second: base address of the common registers of the TMU controller.
 176  * @irq: irq number of the TMU controller.
 177  * @soc: id of the SOC type.
 178  * @irq_work: pointer to the irq work structure.
 179  * @lock: lock to implement synchronization.
 180  * @clk: pointer to the clock structure.
 181  * @clk_sec: pointer to the clock structure for accessing the base_second.
 182  * @sclk: pointer to the clock structure for accessing the tmu special clk.
 183  * @temp_error1: fused value of the first point trim.
 184  * @temp_error2: fused value of the second point trim.
 185  * @regulator: pointer to the TMU regulator structure.
 186  * @reg_conf: pointer to structure to register with core thermal.
 187  * @tmu_initialize: SoC specific TMU initialization method
 188  * @tmu_control: SoC specific TMU control method
 189  * @tmu_read: SoC specific TMU temperature read method
 190  * @tmu_set_emulation: SoC specific TMU emulation setting method
 191  * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
 192  */
 193 struct exynos_tmu_data {
 194         int id;
 195         struct exynos_tmu_platform_data *pdata;
 196         void __iomem *base;
 197         void __iomem *base_second;
 198         int irq;
 199         enum soc_type soc;
 200         struct work_struct irq_work;
 201         struct mutex lock;
 202         struct clk *clk, *clk_sec, *sclk;
 203         u16 temp_error1, temp_error2;
 204         struct regulator *regulator;
 205         struct thermal_zone_device *tzd;
 206
 207         int (*tmu_initialize)(struct platform_device *pdev);
 208         void (*tmu_control)(struct platform_device *pdev, bool on);
 209         int (*tmu_read)(struct exynos_tmu_data *data);
 210         void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
 211         void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
 212 };
 213
 214 static void exynos_report_trigger(struct exynos_tmu_data *p)
 215 {
 216         char data[10], *envp[] = { data, NULL };
 217         struct thermal_zone_device *tz = p->tzd;
 218         int temp;
 219         unsigned int i;
 220
 221         if (!tz) {
 222                 pr_err("No thermal zone device defined\n");
 223                 return;
 224         }
 225
 226         thermal_zone_device_update(tz);
 227
 228         mutex_lock(&tz->lock);
 229         /* Find the level for which trip happened */
 230         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 231                 tz->ops->get_trip_temp(tz, i, &temp);
 232                 if (tz->last_temperature < temp)
 233                         break;
 234         }
 235
 236         snprintf(data, sizeof(data), "%u", i);
 237         kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
 238         mutex_unlock(&tz->lock);
 239 }
 240
 241 /*
 242  * TMU treats temperature as a mapped temperature code.
 243  * The temperature is converted differently depending on the calibration type.
 244  */
 245 static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
 246 {
 247         struct exynos_tmu_platform_data *pdata = data->pdata;
 248         int temp_code;
 249
 250         switch (pdata->cal_type) {
 251         case TYPE_TWO_POINT_TRIMMING:
 252                 temp_code = (temp - pdata->first_point_trim) *
 253                         (data->temp_error2 - data->temp_error1) /
 254                         (pdata->second_point_trim - pdata->first_point_trim) +
 255                         data->temp_error1;
 256                 break;
 257         case TYPE_ONE_POINT_TRIMMING:
 258                 temp_code = temp + data->temp_error1 - pdata->first_point_trim;
 259                 break;
 260         default:
 261                 temp_code = temp + pdata->default_temp_offset;
 262                 break;
 263         }
 264
 265         return temp_code;
 266 }
 267
 268 /*
 269  * Calculate a temperature value from a temperature code.
 270  * The unit of the temperature is degree Celsius.
 271  */
 272 static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
 273 {
 274         struct exynos_tmu_platform_data *pdata = data->pdata;
 275         int temp;
 276
 277         switch (pdata->cal_type) {
 278         case TYPE_TWO_POINT_TRIMMING:
 279                 temp = (temp_code - data->temp_error1) *
 280                         (pdata->second_point_trim - pdata->first_point_trim) /
 281                         (data->temp_error2 - data->temp_error1) +
 282                         pdata->first_point_trim;
 283                 break;
 284         case TYPE_ONE_POINT_TRIMMING:
 285                 temp = temp_code - data->temp_error1 + pdata->first_point_trim;
 286                 break;
 287         default:
 288                 temp = temp_code - pdata->default_temp_offset;
 289                 break;
 290         }
 291
 292         return temp;
 293 }
 294
 295 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
 296 {
 297         struct exynos_tmu_platform_data *pdata = data->pdata;
 298
 299         data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
 300         data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
 301                                 EXYNOS_TMU_TEMP_MASK);
 302
 303         if (!data->temp_error1 ||
 304                 (pdata->min_efuse_value > data->temp_error1) ||
 305                 (data->temp_error1 > pdata->max_efuse_value))
 306                 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
 307
 308         if (!data->temp_error2)
 309                 data->temp_error2 =
 310                         (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
 311                         EXYNOS_TMU_TEMP_MASK;
 312 }
 313
 314 static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
 315 {
 316         struct thermal_zone_device *tz = data->tzd;
 317         const struct thermal_trip * const trips =
 318                 of_thermal_get_trip_points(tz);
 319         unsigned long temp;
 320         int i;
 321
 322         if (!trips) {
 323                 pr_err("%s: Cannot get trip points from of-thermal.c!\n",
 324                        __func__);
 325                 return 0;
 326         }
 327
 328         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 329                 if (trips[i].type == THERMAL_TRIP_CRITICAL)
 330                         continue;
 331
 332                 temp = trips[i].temperature / MCELSIUS;
 333                 if (falling)
 334                         temp -= (trips[i].hysteresis / MCELSIUS);
 335                 else
 336                         threshold &= ~(0xff << 8 * i);
 337
 338                 threshold |= temp_to_code(data, temp) << 8 * i;
 339         }
 340
 341         return threshold;
 342 }
 343
 344 static int exynos_tmu_initialize(struct platform_device *pdev)
 345 {
 346         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 347         int ret;
 348
 349         mutex_lock(&data->lock);
 350         clk_enable(data->clk);
 351         if (!IS_ERR(data->clk_sec))
 352                 clk_enable(data->clk_sec);
 353         ret = data->tmu_initialize(pdev);
 354         clk_disable(data->clk);
 355         mutex_unlock(&data->lock);
 356         if (!IS_ERR(data->clk_sec))
 357                 clk_disable(data->clk_sec);
 358
 359         return ret;
 360 }
 361
 362 static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
 363 {
 364         struct exynos_tmu_platform_data *pdata = data->pdata;
 365
 366         if (data->soc == SOC_ARCH_EXYNOS4412 ||
 367             data->soc == SOC_ARCH_EXYNOS3250)
 368                 con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
 369
 370         con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
 371         con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
 372
 373         con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
 374         con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
 375
 376         if (pdata->noise_cancel_mode) {
 377                 con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
 378                 con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
 379         }
 380
 381         return con;
 382 }
 383
 384 static void exynos_tmu_control(struct platform_device *pdev, bool on)
 385 {
 386         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 387
 388         mutex_lock(&data->lock);
 389         clk_enable(data->clk);
 390         data->tmu_control(pdev, on);
 391         clk_disable(data->clk);
 392         mutex_unlock(&data->lock);
 393 }
 394
 395 static int exynos4210_tmu_initialize(struct platform_device *pdev)
 396 {
 397         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 398         struct thermal_zone_device *tz = data->tzd;
 399         const struct thermal_trip * const trips =
 400                 of_thermal_get_trip_points(tz);
 401         int ret = 0, threshold_code, i;
 402         unsigned long reference, temp;
 403         unsigned int status;
 404
 405         if (!trips) {
 406                 pr_err("%s: Cannot get trip points from of-thermal.c!\n",
 407                        __func__);
 408                 ret = -ENODEV;
 409                 goto out;
 410         }
 411
 412         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 413         if (!status) {
 414                 ret = -EBUSY;
 415                 goto out;
 416         }
 417
 418         sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
 419
 420         /* Write temperature code for threshold */
 421         reference = trips[0].temperature / MCELSIUS;
 422         threshold_code = temp_to_code(data, reference);
 423         if (threshold_code < 0) {
 424                 ret = threshold_code;
 425                 goto out;
 426         }
 427         writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
 428
 429         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 430                 temp = trips[i].temperature / MCELSIUS;
 431                 writeb(temp - reference, data->base +
 432                        EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
 433         }
 434
 435         data->tmu_clear_irqs(data);
 436 out:
 437         return ret;
 438 }
 439
 440 static int exynos4412_tmu_initialize(struct platform_device *pdev)
 441 {
 442         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 443         const struct thermal_trip * const trips =
 444                 of_thermal_get_trip_points(data->tzd);
 445         unsigned int status, trim_info, con, ctrl, rising_threshold;
 446         int ret = 0, threshold_code, i;
 447         unsigned long crit_temp = 0;
 448
 449         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 450         if (!status) {
 451                 ret = -EBUSY;
 452                 goto out;
 453         }
 454
 455         if (data->soc == SOC_ARCH_EXYNOS3250 ||
 456             data->soc == SOC_ARCH_EXYNOS4412 ||
 457             data->soc == SOC_ARCH_EXYNOS5250) {
 458                 if (data->soc == SOC_ARCH_EXYNOS3250) {
 459                         ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
 460                         ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
 461                         writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
 462                 }
 463                 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
 464                 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
 465                 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
 466         }
 467
 468         /* On exynos5420 the triminfo register is in the shared space */
 469         if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
 470                 trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
 471         else
 472                 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
 473
 474         sanitize_temp_error(data, trim_info);
 475
 476         /* Write temperature code for rising and falling threshold */
 477         rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
 478         rising_threshold = get_th_reg(data, rising_threshold, false);
 479         writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
 480         writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
 481
 482         data->tmu_clear_irqs(data);
 483
 484         /* if last threshold limit is also present */
 485         for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
 486                 if (trips[i].type == THERMAL_TRIP_CRITICAL) {
 487                         crit_temp = trips[i].temperature;
 488                         break;
 489                 }
 490         }
 491
 492         if (i == of_thermal_get_ntrips(data->tzd)) {
 493                 pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
 494                        __func__);
 495                 ret = -EINVAL;
 496                 goto out;
 497         }
 498
 499         threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
 500         /* 1-4 level to be assigned in th0 reg */
 501         rising_threshold &= ~(0xff << 8 * i);
 502         rising_threshold |= threshold_code << 8 * i;
 503         writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
 504         con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
 505         con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
 506         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 507
 508 out:
 509         return ret;
 510 }
 511
 512 static int exynos5433_tmu_initialize(struct platform_device *pdev)
 513 {
 514         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 515         struct exynos_tmu_platform_data *pdata = data->pdata;
 516         struct thermal_zone_device *tz = data->tzd;
 517         unsigned int status, trim_info;
 518         unsigned int rising_threshold = 0, falling_threshold = 0;
 519         int temp, temp_hist;
 520         int ret = 0, threshold_code, i, sensor_id, cal_type;
 521
 522         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 523         if (!status) {
 524                 ret = -EBUSY;
 525                 goto out;
 526         }
 527
 528         trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
 529         sanitize_temp_error(data, trim_info);
 530
 531         /* Read the temperature sensor id */
 532         sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
 533                                 >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
 534         dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
 535
 536         /* Read the calibration mode */
 537         writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
 538         cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
 539                                 >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
 540
 541         switch (cal_type) {
 542         case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
 543                 pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
 544                 break;
 545         case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
 546                 pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
 547                 break;
 548         default:
 549                 pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
 550                 break;
 551         };
 552
 553         dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
 554                         cal_type ?  2 : 1);
 555
 556         /* Write temperature code for rising and falling threshold */
 557         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 558                 int rising_reg_offset, falling_reg_offset;
 559                 int j = 0;
 560
 561                 switch (i) {
 562                 case 0:
 563                 case 1:
 564                 case 2:
 565                 case 3:
 566                         rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
 567                         falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
 568                         j = i;
 569                         break;
 570                 case 4:
 571                 case 5:
 572                 case 6:
 573                 case 7:
 574                         rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
 575                         falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
 576                         j = i - 4;
 577                         break;
 578                 default:
 579                         continue;
 580                 }
 581
 582                 /* Write temperature code for rising threshold */
 583                 tz->ops->get_trip_temp(tz, i, &temp);
 584                 temp /= MCELSIUS;
 585                 threshold_code = temp_to_code(data, temp);
 586
 587                 rising_threshold = readl(data->base + rising_reg_offset);
 588                 rising_threshold |= (threshold_code << j * 8);
 589                 writel(rising_threshold, data->base + rising_reg_offset);
 590
 591                 /* Write temperature code for falling threshold */
 592                 tz->ops->get_trip_hyst(tz, i, &temp_hist);
 593                 temp_hist = temp - (temp_hist / MCELSIUS);
 594                 threshold_code = temp_to_code(data, temp_hist);
 595
 596                 falling_threshold = readl(data->base + falling_reg_offset);
 597                 falling_threshold &= ~(0xff << j * 8);
 598                 falling_threshold |= (threshold_code << j * 8);
 599                 writel(falling_threshold, data->base + falling_reg_offset);
 600         }
 601
 602         data->tmu_clear_irqs(data);
 603 out:
 604         return ret;
 605 }
 606
 607 static int exynos5440_tmu_initialize(struct platform_device *pdev)
 608 {
 609         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 610         unsigned int trim_info = 0, con, rising_threshold;
 611         int ret = 0, threshold_code;
 612         int crit_temp = 0;
 613
 614         /*
 615          * For exynos5440 soc triminfo value is swapped between TMU0 and
 616          * TMU2, so the below logic is needed.
 617          */
 618         switch (data->id) {
 619         case 0:
 620                 trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
 621                                  EXYNOS5440_TMU_S0_7_TRIM);
 622                 break;
 623         case 1:
 624                 trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
 625                 break;
 626         case 2:
 627                 trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
 628                                   EXYNOS5440_TMU_S0_7_TRIM);
 629         }
 630         sanitize_temp_error(data, trim_info);
 631
 632         /* Write temperature code for rising and falling threshold */
 633         rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
 634         rising_threshold = get_th_reg(data, rising_threshold, false);
 635         writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
 636         writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
 637
 638         data->tmu_clear_irqs(data);
 639
 640         /* if last threshold limit is also present */
 641         if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
 642                 threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
 643                 /* 5th level to be assigned in th2 reg */
 644                 rising_threshold =
 645                         threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
 646                 writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
 647                 con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
 648                 con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
 649                 writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
 650         }
 651         /* Clear the PMIN in the common TMU register */
 652         if (!data->id)
 653                 writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
 654         return ret;
 655 }
 656
 657 static int exynos7_tmu_initialize(struct platform_device *pdev)
 658 {
 659         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 660         struct thermal_zone_device *tz = data->tzd;
 661         struct exynos_tmu_platform_data *pdata = data->pdata;
 662         unsigned int status, trim_info;
 663         unsigned int rising_threshold = 0, falling_threshold = 0;
 664         int ret = 0, threshold_code, i;
 665         int temp, temp_hist;
 666         unsigned int reg_off, bit_off;
 667
 668         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 669         if (!status) {
 670                 ret = -EBUSY;
 671                 goto out;
 672         }
 673
 674         trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
 675
 676         data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
 677         if (!data->temp_error1 ||
 678             (pdata->min_efuse_value > data->temp_error1) ||
 679             (data->temp_error1 > pdata->max_efuse_value))
 680                 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
 681
 682         /* Write temperature code for rising and falling threshold */
 683         for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
 684                 /*
 685                  * On exynos7 there are 4 rising and 4 falling threshold
 686                  * registers (0x50-0x5c and 0x60-0x6c respectively). Each
 687                  * register holds the value of two threshold levels (at bit
 688                  * offsets 0 and 16). Based on the fact that there are atmost
 689                  * eight possible trigger levels, calculate the register and
 690                  * bit offsets where the threshold levels are to be written.
 691                  *
 692                  * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
 693                  * [24:16] - Threshold level 7
 694                  * [8:0] - Threshold level 6
 695                  * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
 696                  * [24:16] - Threshold level 5
 697                  * [8:0] - Threshold level 4
 698                  *
 699                  * and similarly for falling thresholds.
 700                  *
 701                  * Based on the above, calculate the register and bit offsets
 702                  * for rising/falling threshold levels and populate them.
 703                  */
 704                 reg_off = ((7 - i) / 2) * 4;
 705                 bit_off = ((8 - i) % 2);
 706
 707                 tz->ops->get_trip_temp(tz, i, &temp);
 708                 temp /= MCELSIUS;
 709
 710                 tz->ops->get_trip_hyst(tz, i, &temp_hist);
 711                 temp_hist = temp - (temp_hist / MCELSIUS);
 712
 713                 /* Set 9-bit temperature code for rising threshold levels */
 714                 threshold_code = temp_to_code(data, temp);
 715                 rising_threshold = readl(data->base +
 716                         EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
 717                 rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
 718                 rising_threshold |= threshold_code << (16 * bit_off);
 719                 writel(rising_threshold,
 720                        data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
 721
 722                 /* Set 9-bit temperature code for falling threshold levels */
 723                 threshold_code = temp_to_code(data, temp_hist);
 724                 falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
 725                 falling_threshold |= threshold_code << (16 * bit_off);
 726                 writel(falling_threshold,
 727                        data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
 728         }
 729
 730         data->tmu_clear_irqs(data);
 731 out:
 732         return ret;
 733 }
 734
 735 static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
 736 {
 737         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 738         struct thermal_zone_device *tz = data->tzd;
 739         unsigned int con, interrupt_en;
 740
 741         con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 742
 743         if (on) {
 744                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 745                 interrupt_en =
 746                         (of_thermal_is_trip_valid(tz, 3)
 747                          << EXYNOS_TMU_INTEN_RISE3_SHIFT) |
 748                         (of_thermal_is_trip_valid(tz, 2)
 749                          << EXYNOS_TMU_INTEN_RISE2_SHIFT) |
 750                         (of_thermal_is_trip_valid(tz, 1)
 751                          << EXYNOS_TMU_INTEN_RISE1_SHIFT) |
 752                         (of_thermal_is_trip_valid(tz, 0)
 753                          << EXYNOS_TMU_INTEN_RISE0_SHIFT);
 754
 755                 if (data->soc != SOC_ARCH_EXYNOS4210)
 756                         interrupt_en |=
 757                                 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 758         } else {
 759                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 760                 interrupt_en = 0; /* Disable all interrupts */
 761         }
 762         writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
 763         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 764 }
 765
 766 static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
 767 {
 768         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 769         struct thermal_zone_device *tz = data->tzd;
 770         unsigned int con, interrupt_en, pd_det_en;
 771
 772         con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 773
 774         if (on) {
 775                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 776                 interrupt_en =
 777                         (of_thermal_is_trip_valid(tz, 7)
 778                         << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
 779                         (of_thermal_is_trip_valid(tz, 6)
 780                         << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
 781                         (of_thermal_is_trip_valid(tz, 5)
 782                         << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
 783                         (of_thermal_is_trip_valid(tz, 4)
 784                         << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
 785                         (of_thermal_is_trip_valid(tz, 3)
 786                         << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
 787                         (of_thermal_is_trip_valid(tz, 2)
 788                         << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
 789                         (of_thermal_is_trip_valid(tz, 1)
 790                         << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
 791                         (of_thermal_is_trip_valid(tz, 0)
 792                         << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
 793
 794                 interrupt_en |=
 795                         interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 796         } else {
 797                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 798                 interrupt_en = 0; /* Disable all interrupts */
 799         }
 800
 801         pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
 802
 803         writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
 804         writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
 805         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 806 }
 807
 808 static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
 809 {
 810         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 811         struct thermal_zone_device *tz = data->tzd;
 812         unsigned int con, interrupt_en;
 813
 814         con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
 815
 816         if (on) {
 817                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 818                 interrupt_en =
 819                         (of_thermal_is_trip_valid(tz, 3)
 820                          << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
 821                         (of_thermal_is_trip_valid(tz, 2)
 822                          << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
 823                         (of_thermal_is_trip_valid(tz, 1)
 824                          << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
 825                         (of_thermal_is_trip_valid(tz, 0)
 826                          << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
 827                 interrupt_en |=
 828                         interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
 829         } else {
 830                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 831                 interrupt_en = 0; /* Disable all interrupts */
 832         }
 833         writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
 834         writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
 835 }
 836
 837 static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 838 {
 839         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 840         struct thermal_zone_device *tz = data->tzd;
 841         unsigned int con, interrupt_en;
 842
 843         con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 844
 845         if (on) {
 846                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 847                 con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
 848                 interrupt_en =
 849                         (of_thermal_is_trip_valid(tz, 7)
 850                         << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
 851                         (of_thermal_is_trip_valid(tz, 6)
 852                         << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
 853                         (of_thermal_is_trip_valid(tz, 5)
 854                         << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
 855                         (of_thermal_is_trip_valid(tz, 4)
 856                         << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
 857                         (of_thermal_is_trip_valid(tz, 3)
 858                         << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
 859                         (of_thermal_is_trip_valid(tz, 2)
 860                         << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
 861                         (of_thermal_is_trip_valid(tz, 1)
 862                         << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
 863                         (of_thermal_is_trip_valid(tz, 0)
 864                         << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
 865
 866                 interrupt_en |=
 867                         interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 868         } else {
 869                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 870                 con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
 871                 interrupt_en = 0; /* Disable all interrupts */
 872         }
 873
 874         writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
 875         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 876 }
 877
 878 static int exynos_get_temp(void *p, int *temp)
 879 {
 880         struct exynos_tmu_data *data = p;
 881
 882         if (!data || !data->tmu_read)
 883                 return -EINVAL;
 884
 885         mutex_lock(&data->lock);
 886         clk_enable(data->clk);
 887
 888         *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
 889
 890         clk_disable(data->clk);
 891         mutex_unlock(&data->lock);
 892
 893         return 0;
 894 }
 895
 896 #ifdef CONFIG_THERMAL_EMULATION
 897 static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
 898                             int temp)
 899 {
 900         if (temp) {
 901                 temp /= MCELSIUS;
 902
 903                 if (data->soc != SOC_ARCH_EXYNOS5440) {
 904                         val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
 905                         val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
 906                 }
 907                 if (data->soc == SOC_ARCH_EXYNOS7) {
 908                         val &= ~(EXYNOS7_EMUL_DATA_MASK <<
 909                                 EXYNOS7_EMUL_DATA_SHIFT);
 910                         val |= (temp_to_code(data, temp) <<
 911                                 EXYNOS7_EMUL_DATA_SHIFT) |
 912                                 EXYNOS_EMUL_ENABLE;
 913                 } else {
 914                         val &= ~(EXYNOS_EMUL_DATA_MASK <<
 915                                 EXYNOS_EMUL_DATA_SHIFT);
 916                         val |= (temp_to_code(data, temp) <<
 917                                 EXYNOS_EMUL_DATA_SHIFT) |
 918                                 EXYNOS_EMUL_ENABLE;
 919                 }
 920         } else {
 921                 val &= ~EXYNOS_EMUL_ENABLE;
 922         }
 923
 924         return val;
 925 }
 926
 927 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 928                                          int temp)
 929 {
 930         unsigned int val;
 931         u32 emul_con;
 932
 933         if (data->soc == SOC_ARCH_EXYNOS5260)
 934                 emul_con = EXYNOS5260_EMUL_CON;
 935         else if (data->soc == SOC_ARCH_EXYNOS5433)
 936                 emul_con = EXYNOS5433_TMU_EMUL_CON;
 937         else if (data->soc == SOC_ARCH_EXYNOS7)
 938                 emul_con = EXYNOS7_TMU_REG_EMUL_CON;
 939         else
 940                 emul_con = EXYNOS_EMUL_CON;
 941
 942         val = readl(data->base + emul_con);
 943         val = get_emul_con_reg(data, val, temp);
 944         writel(val, data->base + emul_con);
 945 }
 946
 947 static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
 948                                          int temp)
 949 {
 950         unsigned int val;
 951
 952         val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
 953         val = get_emul_con_reg(data, val, temp);
 954         writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
 955 }
 956
 957 static int exynos_tmu_set_emulation(void *drv_data, int temp)
 958 {
 959         struct exynos_tmu_data *data = drv_data;
 960         int ret = -EINVAL;
 961
 962         if (data->soc == SOC_ARCH_EXYNOS4210)
 963                 goto out;
 964
 965         if (temp && temp < MCELSIUS)
 966                 goto out;
 967
 968         mutex_lock(&data->lock);
 969         clk_enable(data->clk);
 970         data->tmu_set_emulation(data, temp);
 971         clk_disable(data->clk);
 972         mutex_unlock(&data->lock);
 973         return 0;
 974 out:
 975         return ret;
 976 }
 977 #else
 978 #define exynos4412_tmu_set_emulation NULL
 979 #define exynos5440_tmu_set_emulation NULL
 980 static int exynos_tmu_set_emulation(void *drv_data, int temp)
 981         { return -EINVAL; }
 982 #endif /* CONFIG_THERMAL_EMULATION */
 983
 984 static int exynos4210_tmu_read(struct exynos_tmu_data *data)
 985 {
 986         int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
 987
 988         /* "temp_code" should range between 75 and 175 */
 989         return (ret < 75 || ret > 175) ? -ENODATA : ret;
 990 }
 991
 992 static int exynos4412_tmu_read(struct exynos_tmu_data *data)
 993 {
 994         return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
 995 }
 996
 997 static int exynos5440_tmu_read(struct exynos_tmu_data *data)
 998 {
 999         return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
1000 }
1001
1002 static int exynos7_tmu_read(struct exynos_tmu_data *data)
1003 {
1004         return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
1005                 EXYNOS7_TMU_TEMP_MASK;
1006 }
1007
1008 static void exynos_tmu_work(struct work_struct *work)
1009 {
1010         struct exynos_tmu_data *data = container_of(work,
1011                         struct exynos_tmu_data, irq_work);
1012         unsigned int val_type;
1013
1014         if (!IS_ERR(data->clk_sec))
1015                 clk_enable(data->clk_sec);
1016         /* Find which sensor generated this interrupt */
1017         if (data->soc == SOC_ARCH_EXYNOS5440) {
1018                 val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
1019                 if (!((val_type >> data->id) & 0x1))
1020                         goto out;
1021         }
1022         if (!IS_ERR(data->clk_sec))
1023                 clk_disable(data->clk_sec);
1024
1025         exynos_report_trigger(data);
1026         mutex_lock(&data->lock);
1027         clk_enable(data->clk);
1028
1029         /* TODO: take action based on particular interrupt */
1030         data->tmu_clear_irqs(data);
1031
1032         clk_disable(data->clk);
1033         mutex_unlock(&data->lock);
1034 out:
1035         enable_irq(data->irq);
1036 }
1037
1038 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
1039 {
1040         unsigned int val_irq;
1041         u32 tmu_intstat, tmu_intclear;
1042
1043         if (data->soc == SOC_ARCH_EXYNOS5260) {
1044                 tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
1045                 tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
1046         } else if (data->soc == SOC_ARCH_EXYNOS7) {
1047                 tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
1048                 tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
1049         } else if (data->soc == SOC_ARCH_EXYNOS5433) {
1050                 tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
1051                 tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
1052         } else {
1053                 tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
1054                 tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
1055         }
1056
1057         val_irq = readl(data->base + tmu_intstat);
1058         /*
1059          * Clear the interrupts.  Please note that the documentation for
1060          * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
1061          * states that INTCLEAR register has a different placing of bits
1062          * responsible for FALL IRQs than INTSTAT register.  Exynos5420
1063          * and Exynos5440 documentation is correct (Exynos4210 doesn't
1064          * support FALL IRQs at all).
1065          */
1066         writel(val_irq, data->base + tmu_intclear);
1067 }
1068
1069 static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
1070 {
1071         unsigned int val_irq;
1072
1073         val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
1074         /* clear the interrupts */
1075         writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
1076 }
1077
1078 static irqreturn_t exynos_tmu_irq(int irq, void *id)
1079 {
1080         struct exynos_tmu_data *data = id;
1081
1082         disable_irq_nosync(irq);
1083         schedule_work(&data->irq_work);
1084
1085         return IRQ_HANDLED;
1086 }
1087
1088 static const struct of_device_id exynos_tmu_match[] = {
1089         { .compatible = "samsung,exynos3250-tmu", },
1090         { .compatible = "samsung,exynos4210-tmu", },
1091         { .compatible = "samsung,exynos4412-tmu", },
1092         { .compatible = "samsung,exynos5250-tmu", },
1093         { .compatible = "samsung,exynos5260-tmu", },
1094         { .compatible = "samsung,exynos5420-tmu", },
1095         { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
1096         { .compatible = "samsung,exynos5433-tmu", },
1097         { .compatible = "samsung,exynos5440-tmu", },
1098         { .compatible = "samsung,exynos7-tmu", },
1099         { /* sentinel */ },
1100 };
1101 MODULE_DEVICE_TABLE(of, exynos_tmu_match);
1102
1103 static int exynos_of_get_soc_type(struct device_node *np)
1104 {
1105         if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
1106                 return SOC_ARCH_EXYNOS3250;
1107         else if (of_device_is_compatible(np, "samsung,exynos4210-tmu"))
1108                 return SOC_ARCH_EXYNOS4210;
1109         else if (of_device_is_compatible(np, "samsung,exynos4412-tmu"))
1110                 return SOC_ARCH_EXYNOS4412;
1111         else if (of_device_is_compatible(np, "samsung,exynos5250-tmu"))
1112                 return SOC_ARCH_EXYNOS5250;
1113         else if (of_device_is_compatible(np, "samsung,exynos5260-tmu"))
1114                 return SOC_ARCH_EXYNOS5260;
1115         else if (of_device_is_compatible(np, "samsung,exynos5420-tmu"))
1116                 return SOC_ARCH_EXYNOS5420;
1117         else if (of_device_is_compatible(np,
1118                                          "samsung,exynos5420-tmu-ext-triminfo"))
1119                 return SOC_ARCH_EXYNOS5420_TRIMINFO;
1120         else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
1121                 return SOC_ARCH_EXYNOS5433;
1122         else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
1123                 return SOC_ARCH_EXYNOS5440;
1124         else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
1125                 return SOC_ARCH_EXYNOS7;
1126
1127         return -EINVAL;
1128 }
1129
1130 static int exynos_of_sensor_conf(struct device_node *np,
1131                                  struct exynos_tmu_platform_data *pdata)
1132 {
1133         u32 value;
1134         int ret;
1135
1136         of_node_get(np);
1137
1138         ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
1139         pdata->gain = (u8)value;
1140         of_property_read_u32(np, "samsung,tmu_reference_voltage", &value);
1141         pdata->reference_voltage = (u8)value;
1142         of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value);
1143         pdata->noise_cancel_mode = (u8)value;
1144
1145         of_property_read_u32(np, "samsung,tmu_efuse_value",
1146                              &pdata->efuse_value);
1147         of_property_read_u32(np, "samsung,tmu_min_efuse_value",
1148                              &pdata->min_efuse_value);
1149         of_property_read_u32(np, "samsung,tmu_max_efuse_value",
1150                              &pdata->max_efuse_value);
1151
1152         of_property_read_u32(np, "samsung,tmu_first_point_trim", &value);
1153         pdata->first_point_trim = (u8)value;
1154         of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
1155         pdata->second_point_trim = (u8)value;
1156         of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
1157         pdata->default_temp_offset = (u8)value;
1158
1159         of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
1160         of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode);
1161
1162         of_node_put(np);
1163         return 0;
1164 }
1165
1166 static int exynos_map_dt_data(struct platform_device *pdev)
1167 {
1168         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
1169         struct exynos_tmu_platform_data *pdata;
1170         struct resource res;
1171         int ret;
1172
1173         if (!data || !pdev->dev.of_node)
1174                 return -ENODEV;
1175
1176         /*
1177          * Try enabling the regulator if found
1178          * TODO: Add regulator as an SOC feature, so that regulator enable
1179          * is a compulsory call.
1180          */
1181         data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
1182         if (!IS_ERR(data->regulator)) {
1183                 ret = regulator_enable(data->regulator);
1184                 if (ret) {
1185                         dev_err(&pdev->dev, "failed to enable vtmu\n");
1186                         return ret;
1187                 }
1188         } else {
1189                 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
1190         }
1191
1192         data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
1193         if (data->id < 0)
1194                 data->id = 0;
1195
1196         data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
1197         if (data->irq <= 0) {
1198                 dev_err(&pdev->dev, "failed to get IRQ\n");
1199                 return -ENODEV;
1200         }
1201
1202         if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
1203                 dev_err(&pdev->dev, "failed to get Resource 0\n");
1204                 return -ENODEV;
1205         }
1206
1207         data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
1208         if (!data->base) {
1209                 dev_err(&pdev->dev, "Failed to ioremap memory\n");
1210                 return -EADDRNOTAVAIL;
1211         }
1212
1213         pdata = devm_kzalloc(&pdev->dev,
1214                              sizeof(struct exynos_tmu_platform_data),
1215                              GFP_KERNEL);
1216         if (!pdata)
1217                 return -ENOMEM;
1218
1219         exynos_of_sensor_conf(pdev->dev.of_node, pdata);
1220         data->pdata = pdata;
1221         data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
1222
1223         switch (data->soc) {
1224         case SOC_ARCH_EXYNOS4210:
1225                 data->tmu_initialize = exynos4210_tmu_initialize;
1226                 data->tmu_control = exynos4210_tmu_control;
1227                 data->tmu_read = exynos4210_tmu_read;
1228                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1229                 break;
1230         case SOC_ARCH_EXYNOS3250:
1231         case SOC_ARCH_EXYNOS4412:
1232         case SOC_ARCH_EXYNOS5250:
1233         case SOC_ARCH_EXYNOS5260:
1234         case SOC_ARCH_EXYNOS5420:
1235         case SOC_ARCH_EXYNOS5420_TRIMINFO:
1236                 data->tmu_initialize = exynos4412_tmu_initialize;
1237                 data->tmu_control = exynos4210_tmu_control;
1238                 data->tmu_read = exynos4412_tmu_read;
1239                 data->tmu_set_emulation = exynos4412_tmu_set_emulation;
1240                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1241                 break;
1242         case SOC_ARCH_EXYNOS5433:
1243                 data->tmu_initialize = exynos5433_tmu_initialize;
1244                 data->tmu_control = exynos5433_tmu_control;
1245                 data->tmu_read = exynos4412_tmu_read;
1246                 data->tmu_set_emulation = exynos4412_tmu_set_emulation;
1247                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1248                 break;
1249         case SOC_ARCH_EXYNOS5440:
1250                 data->tmu_initialize = exynos5440_tmu_initialize;
1251                 data->tmu_control = exynos5440_tmu_control;
1252                 data->tmu_read = exynos5440_tmu_read;
1253                 data->tmu_set_emulation = exynos5440_tmu_set_emulation;
1254                 data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
1255                 break;
1256         case SOC_ARCH_EXYNOS7:
1257                 data->tmu_initialize = exynos7_tmu_initialize;
1258                 data->tmu_control = exynos7_tmu_control;
1259                 data->tmu_read = exynos7_tmu_read;
1260                 data->tmu_set_emulation = exynos4412_tmu_set_emulation;
1261                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1262                 break;
1263         default:
1264                 dev_err(&pdev->dev, "Platform not supported\n");
1265                 return -EINVAL;
1266         }
1267
1268         /*
1269          * Check if the TMU shares some registers and then try to map the
1270          * memory of common registers.
1271          */
1272         if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
1273             data->soc != SOC_ARCH_EXYNOS5440)
1274                 return 0;
1275
1276         if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
1277                 dev_err(&pdev->dev, "failed to get Resource 1\n");
1278                 return -ENODEV;
1279         }
1280
1281         data->base_second = devm_ioremap(&pdev->dev, res.start,
1282                                         resource_size(&res));
1283         if (!data->base_second) {
1284                 dev_err(&pdev->dev, "Failed to ioremap memory\n");
1285                 return -ENOMEM;
1286         }
1287
1288         return 0;
1289 }
1290
1291 static struct thermal_zone_of_device_ops exynos_sensor_ops = {
1292         .get_temp = exynos_get_temp,
1293         .set_emul_temp = exynos_tmu_set_emulation,
1294 };
1295
1296 static int exynos_tmu_probe(struct platform_device *pdev)
1297 {
1298         struct exynos_tmu_data *data;
1299         int ret;
1300
1301         data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
1302                                         GFP_KERNEL);
1303         if (!data)
1304                 return -ENOMEM;
1305
1306         platform_set_drvdata(pdev, data);
1307         mutex_init(&data->lock);
1308
1309         data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
1310                                                     &exynos_sensor_ops);
1311         if (IS_ERR(data->tzd)) {
1312                 pr_err("thermal: tz: %p ERROR\n", data->tzd);
1313                 return PTR_ERR(data->tzd);
1314         }
1315         ret = exynos_map_dt_data(pdev);
1316         if (ret)
1317                 goto err_sensor;
1318
1319         INIT_WORK(&data->irq_work, exynos_tmu_work);
1320
1321         data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
1322         if (IS_ERR(data->clk)) {
1323                 dev_err(&pdev->dev, "Failed to get clock\n");
1324                 ret = PTR_ERR(data->clk);
1325                 goto err_sensor;
1326         }
1327
1328         data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
1329         if (IS_ERR(data->clk_sec)) {
1330                 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
1331                         dev_err(&pdev->dev, "Failed to get triminfo clock\n");
1332                         ret = PTR_ERR(data->clk_sec);
1333                         goto err_sensor;
1334                 }
1335         } else {
1336                 ret = clk_prepare(data->clk_sec);
1337                 if (ret) {
1338                         dev_err(&pdev->dev, "Failed to get clock\n");
1339                         goto err_sensor;
1340                 }
1341         }
1342
1343         ret = clk_prepare(data->clk);
1344         if (ret) {
1345                 dev_err(&pdev->dev, "Failed to get clock\n");
1346                 goto err_clk_sec;
1347         }
1348
1349         switch (data->soc) {
1350         case SOC_ARCH_EXYNOS5433:
1351         case SOC_ARCH_EXYNOS7:
1352                 data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
1353                 if (IS_ERR(data->sclk)) {
1354                         dev_err(&pdev->dev, "Failed to get sclk\n");
1355                         goto err_clk;
1356                 } else {
1357                         ret = clk_prepare_enable(data->sclk);
1358                         if (ret) {
1359                                 dev_err(&pdev->dev, "Failed to enable sclk\n");
1360                                 goto err_clk;
1361                         }
1362                 }
1363                 break;
1364         default:
1365                 break;
1366         };
1367
1368         ret = exynos_tmu_initialize(pdev);
1369         if (ret) {
1370                 dev_err(&pdev->dev, "Failed to initialize TMU\n");
1371                 goto err_sclk;
1372         }
1373
1374         ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
1375                 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
1376         if (ret) {
1377                 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
1378                 goto err_sclk;
1379         }
1380
1381         exynos_tmu_control(pdev, true);
1382         return 0;
1383 err_sclk:
1384         clk_disable_unprepare(data->sclk);
1385 err_clk:
1386         clk_unprepare(data->clk);
1387 err_clk_sec:
1388         if (!IS_ERR(data->clk_sec))
1389                 clk_unprepare(data->clk_sec);
1390 err_sensor:
1391         if (!IS_ERR_OR_NULL(data->regulator))
1392                 regulator_disable(data->regulator);
1393         thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
1394
1395         return ret;
1396 }
1397
1398 static int exynos_tmu_remove(struct platform_device *pdev)
1399 {
1400         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
1401         struct thermal_zone_device *tzd = data->tzd;
1402
1403         thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
1404         exynos_tmu_control(pdev, false);
1405
1406         clk_disable_unprepare(data->sclk);
1407         clk_unprepare(data->clk);
1408         if (!IS_ERR(data->clk_sec))
1409                 clk_unprepare(data->clk_sec);
1410
1411         if (!IS_ERR(data->regulator))
1412                 regulator_disable(data->regulator);
1413
1414         return 0;
1415 }
1416
1417 #ifdef CONFIG_PM_SLEEP
1418 static int exynos_tmu_suspend(struct device *dev)
1419 {
1420         exynos_tmu_control(to_platform_device(dev), false);
1421
1422         return 0;
1423 }
1424
1425 static int exynos_tmu_resume(struct device *dev)
1426 {
1427         struct platform_device *pdev = to_platform_device(dev);
1428
1429         exynos_tmu_initialize(pdev);
1430         exynos_tmu_control(pdev, true);
1431
1432         return 0;
1433 }
1434
1435 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
1436                          exynos_tmu_suspend, exynos_tmu_resume);
1437 #define EXYNOS_TMU_PM   (&exynos_tmu_pm)
1438 #else
1439 #define EXYNOS_TMU_PM   NULL
1440 #endif
1441
1442 static struct platform_driver exynos_tmu_driver = {
1443         .driver = {
1444                 .name   = "exynos-tmu",
1445                 .pm     = EXYNOS_TMU_PM,
1446                 .of_match_table = exynos_tmu_match,
1447         },
1448         .probe = exynos_tmu_probe,
1449         .remove = exynos_tmu_remove,
1450 };
1451
1452 module_platform_driver(exynos_tmu_driver);
1453
1454 MODULE_DESCRIPTION("EXYNOS TMU Driver");
1455 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
1456 MODULE_LICENSE("GPL");
1457 MODULE_ALIAS("platform:exynos-tmu");