2 * core.c - ChipIdea USB IP core family device controller
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 * Description: ChipIdea USB IP core family device controller
16 * This driver is composed of several blocks:
17 * - HW: hardware interface
18 * - DBG: debug facilities (optional)
20 * - ISR: interrupts handling
21 * - ENDPT: endpoint operations (Gadget API)
22 * - GADGET: gadget operations (Gadget API)
23 * - BUS: bus glue code, bus abstraction layer
26 * - CONFIG_USB_CHIPIDEA_DEBUG: enable debug facilities
27 * - STALL_IN: non-empty bulk-in pipes cannot be halted
28 * if defined mass storage compliance succeeds but with warnings
32 * if undefined usbtest 13 fails
33 * - TRACE: enable function tracing (depends on DEBUG)
36 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
37 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
38 * - Normal & LPM support
41 * - OK: 0-12, 13 (STALL_IN defined) & 14
42 * - Not Supported: 15 & 16 (ISO)
45 * - Suspend & Remote Wakeup
47 #include <linux/delay.h>
48 #include <linux/device.h>
49 #include <linux/dma-mapping.h>
50 #include <linux/extcon.h>
51 #include <linux/phy/phy.h>
52 #include <linux/platform_device.h>
53 #include <linux/module.h>
54 #include <linux/idr.h>
55 #include <linux/interrupt.h>
57 #include <linux/kernel.h>
58 #include <linux/slab.h>
59 #include <linux/pm_runtime.h>
60 #include <linux/usb/ch9.h>
61 #include <linux/usb/gadget.h>
62 #include <linux/usb/otg.h>
63 #include <linux/usb/chipidea.h>
64 #include <linux/usb/of.h>
66 #include <linux/phy.h>
67 #include <linux/regulator/consumer.h>
68 #include <linux/usb/ehci_def.h>
77 /* Controller register map */
78 static const u8 ci_regs_nolpm[] = {
79 [CAP_CAPLENGTH] = 0x00U,
80 [CAP_HCCPARAMS] = 0x08U,
81 [CAP_DCCPARAMS] = 0x24U,
82 [CAP_TESTMODE] = 0x38U,
86 [OP_DEVICEADDR] = 0x14U,
87 [OP_ENDPTLISTADDR] = 0x18U,
89 [OP_BURSTSIZE] = 0x20U,
94 [OP_ENDPTSETUPSTAT] = 0x6CU,
95 [OP_ENDPTPRIME] = 0x70U,
96 [OP_ENDPTFLUSH] = 0x74U,
97 [OP_ENDPTSTAT] = 0x78U,
98 [OP_ENDPTCOMPLETE] = 0x7CU,
99 [OP_ENDPTCTRL] = 0x80U,
102 static const u8 ci_regs_lpm[] = {
103 [CAP_CAPLENGTH] = 0x00U,
104 [CAP_HCCPARAMS] = 0x08U,
105 [CAP_DCCPARAMS] = 0x24U,
106 [CAP_TESTMODE] = 0xFCU,
109 [OP_USBINTR] = 0x08U,
110 [OP_DEVICEADDR] = 0x14U,
111 [OP_ENDPTLISTADDR] = 0x18U,
113 [OP_BURSTSIZE] = 0x20U,
117 [OP_USBMODE] = 0xC8U,
118 [OP_ENDPTSETUPSTAT] = 0xD8U,
119 [OP_ENDPTPRIME] = 0xDCU,
120 [OP_ENDPTFLUSH] = 0xE0U,
121 [OP_ENDPTSTAT] = 0xE4U,
122 [OP_ENDPTCOMPLETE] = 0xE8U,
123 [OP_ENDPTCTRL] = 0xECU,
126 static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
130 for (i = 0; i < OP_ENDPTCTRL; i++)
131 ci->hw_bank.regmap[i] =
132 (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
133 (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
135 for (; i <= OP_LAST; i++)
136 ci->hw_bank.regmap[i] = ci->hw_bank.op +
137 4 * (i - OP_ENDPTCTRL) +
139 ? ci_regs_lpm[OP_ENDPTCTRL]
140 : ci_regs_nolpm[OP_ENDPTCTRL]);
144 static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
146 int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
147 enum ci_revision rev = CI_REVISION_UNKNOWN;
150 rev = hw_read_id_reg(ci, ID_ID, REVISION)
152 rev += CI_REVISION_20;
153 } else if (ver == 0x0) {
154 rev = CI_REVISION_1X;
161 * hw_read_intr_enable: returns interrupt enable register
163 * @ci: the controller
165 * This function returns register data
167 u32 hw_read_intr_enable(struct ci_hdrc *ci)
169 return hw_read(ci, OP_USBINTR, ~0);
173 * hw_read_intr_status: returns interrupt status register
175 * @ci: the controller
177 * This function returns register data
179 u32 hw_read_intr_status(struct ci_hdrc *ci)
181 return hw_read(ci, OP_USBSTS, ~0);
185 * hw_port_test_set: writes port test mode (execute without interruption)
188 * This function returns an error code
190 int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
192 const u8 TEST_MODE_MAX = 7;
194 if (mode > TEST_MODE_MAX)
197 hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
202 * hw_port_test_get: reads port test mode value
204 * @ci: the controller
206 * This function returns port test mode value
208 u8 hw_port_test_get(struct ci_hdrc *ci)
210 return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
213 static void hw_wait_phy_stable(void)
216 * The phy needs some delay to output the stable status from low
217 * power mode. And for OTGSC, the status inputs are debounced
218 * using a 1 ms time constant, so, delay 2ms for controller to get
219 * the stable status, like vbus and id when the phy leaves low power.
221 usleep_range(2000, 2500);
224 /* The PHY enters/leaves low power mode */
225 static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
227 enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
228 bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
231 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
232 PORTSC_PHCD(ci->hw_bank.lpm));
233 else if (!enable && lpm)
234 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
238 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
242 /* bank is a module variable */
243 ci->hw_bank.abs = base;
245 ci->hw_bank.cap = ci->hw_bank.abs;
246 ci->hw_bank.cap += ci->platdata->capoffset;
247 ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
249 hw_alloc_regmap(ci, false);
250 reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
251 __ffs(HCCPARAMS_LEN);
252 ci->hw_bank.lpm = reg;
254 hw_alloc_regmap(ci, !!reg);
255 ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
256 ci->hw_bank.size += OP_LAST;
257 ci->hw_bank.size /= sizeof(u32);
259 reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
260 __ffs(DCCPARAMS_DEN);
261 ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
263 if (ci->hw_ep_max > ENDPT_MAX)
266 ci_hdrc_enter_lpm(ci, false);
268 /* Disable all interrupts bits */
269 hw_write(ci, OP_USBINTR, 0xffffffff, 0);
271 /* Clear all interrupts status bits*/
272 hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
274 ci->rev = ci_get_revision(ci);
277 "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
278 ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
280 /* setup lock mode ? */
282 /* ENDPTSETUPSTAT is '0' by default */
284 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
289 static void hw_phymode_configure(struct ci_hdrc *ci)
291 u32 portsc, lpm, sts = 0;
293 switch (ci->platdata->phy_mode) {
294 case USBPHY_INTERFACE_MODE_UTMI:
295 portsc = PORTSC_PTS(PTS_UTMI);
296 lpm = DEVLC_PTS(PTS_UTMI);
298 case USBPHY_INTERFACE_MODE_UTMIW:
299 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
300 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
302 case USBPHY_INTERFACE_MODE_ULPI:
303 portsc = PORTSC_PTS(PTS_ULPI);
304 lpm = DEVLC_PTS(PTS_ULPI);
306 case USBPHY_INTERFACE_MODE_SERIAL:
307 portsc = PORTSC_PTS(PTS_SERIAL);
308 lpm = DEVLC_PTS(PTS_SERIAL);
311 case USBPHY_INTERFACE_MODE_HSIC:
312 portsc = PORTSC_PTS(PTS_HSIC);
313 lpm = DEVLC_PTS(PTS_HSIC);
319 if (ci->hw_bank.lpm) {
320 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
322 hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
324 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
326 hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
331 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
333 * @ci: the controller
335 * This function returns an error code if the phy failed to init
337 static int _ci_usb_phy_init(struct ci_hdrc *ci)
342 ret = phy_init(ci->phy);
346 ret = phy_power_on(ci->phy);
352 ret = usb_phy_init(ci->usb_phy);
359 * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
361 * @ci: the controller
363 static void ci_usb_phy_exit(struct ci_hdrc *ci)
366 phy_power_off(ci->phy);
369 usb_phy_shutdown(ci->usb_phy);
374 * ci_usb_phy_init: initialize phy according to different phy type
375 * @ci: the controller
377 * This function returns an error code if usb_phy_init has failed
379 static int ci_usb_phy_init(struct ci_hdrc *ci)
383 switch (ci->platdata->phy_mode) {
384 case USBPHY_INTERFACE_MODE_UTMI:
385 case USBPHY_INTERFACE_MODE_UTMIW:
386 case USBPHY_INTERFACE_MODE_HSIC:
387 ret = _ci_usb_phy_init(ci);
389 hw_wait_phy_stable();
392 hw_phymode_configure(ci);
394 case USBPHY_INTERFACE_MODE_ULPI:
395 case USBPHY_INTERFACE_MODE_SERIAL:
396 hw_phymode_configure(ci);
397 ret = _ci_usb_phy_init(ci);
402 ret = _ci_usb_phy_init(ci);
404 hw_wait_phy_stable();
412 * ci_platform_configure: do controller configure
413 * @ci: the controller
416 void ci_platform_configure(struct ci_hdrc *ci)
418 bool is_device_mode, is_host_mode;
420 is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
421 is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
423 if (is_device_mode &&
424 (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING))
425 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
428 (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING))
429 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
431 if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
433 hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
435 hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
438 if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
439 hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
441 hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
443 if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
444 hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
445 ci->platdata->ahb_burst_config);
447 /* override burst size, take effect only when ahb_burst_config is 0 */
448 if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
449 if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
450 hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
451 ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
453 if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
454 hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
455 ci->platdata->rx_burst_size);
460 * hw_controller_reset: do controller reset
461 * @ci: the controller
463 * This function returns an error code
465 static int hw_controller_reset(struct ci_hdrc *ci)
469 hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
470 while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
480 * hw_device_reset: resets chip (execute without interruption)
481 * @ci: the controller
483 * This function returns an error code
485 int hw_device_reset(struct ci_hdrc *ci)
489 /* should flush & stop before reset */
490 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
491 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
493 ret = hw_controller_reset(ci);
495 dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
499 if (ci->platdata->notify_event)
500 ci->platdata->notify_event(ci,
501 CI_HDRC_CONTROLLER_RESET_EVENT);
503 /* USBMODE should be configured step by step */
504 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
505 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
507 hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
509 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
510 pr_err("cannot enter in %s device mode", ci_role(ci)->name);
511 pr_err("lpm = %i", ci->hw_bank.lpm);
515 ci_platform_configure(ci);
521 * hw_wait_reg: wait the register value
523 * Sometimes, it needs to wait register value before going on.
524 * Eg, when switch to device mode, the vbus value should be lower
525 * than OTGSC_BSV before connects to host.
527 * @ci: the controller
528 * @reg: register index
530 * @value: the bit value to wait
531 * @timeout_ms: timeout in millisecond
533 * This function returns an error code if timeout
535 int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
536 u32 value, unsigned int timeout_ms)
538 unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
540 while (hw_read(ci, reg, mask) != value) {
541 if (time_after(jiffies, elapse)) {
542 dev_err(ci->dev, "timeout waiting for %08x in %d\n",
552 static irqreturn_t ci_irq(int irq, void *data)
554 struct ci_hdrc *ci = data;
555 irqreturn_t ret = IRQ_NONE;
559 disable_irq_nosync(irq);
560 ci->wakeup_int = true;
561 pm_runtime_get(ci->dev);
566 otgsc = hw_read_otgsc(ci, ~0);
567 if (ci_otg_is_fsm_mode(ci)) {
568 ret = ci_otg_fsm_irq(ci);
569 if (ret == IRQ_HANDLED)
575 * Handle id change interrupt, it indicates device/host function
578 if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
580 /* Clear ID change irq status */
581 hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
582 ci_otg_queue_work(ci);
587 * Handle vbus change interrupt, it indicates device connection
588 * and disconnection events.
590 if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
591 ci->b_sess_valid_event = true;
593 hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
594 ci_otg_queue_work(ci);
598 /* Handle device/host interrupt */
599 if (ci->role != CI_ROLE_END)
600 ret = ci_role(ci)->irq(ci);
605 static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
608 struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
609 struct ci_hdrc *ci = vbus->ci;
616 vbus->changed = true;
622 static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
625 struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
626 struct ci_hdrc *ci = id->ci;
639 static int ci_get_platdata(struct device *dev,
640 struct ci_hdrc_platform_data *platdata)
642 struct extcon_dev *ext_vbus, *ext_id;
643 struct ci_hdrc_cable *cable;
646 if (!platdata->phy_mode)
647 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
649 if (!platdata->dr_mode)
650 platdata->dr_mode = usb_get_dr_mode(dev);
652 if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
653 platdata->dr_mode = USB_DR_MODE_OTG;
655 if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
656 /* Get the vbus regulator */
657 platdata->reg_vbus = devm_regulator_get(dev, "vbus");
658 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
659 return -EPROBE_DEFER;
660 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
661 /* no vbus regulator is needed */
662 platdata->reg_vbus = NULL;
663 } else if (IS_ERR(platdata->reg_vbus)) {
664 dev_err(dev, "Getting regulator error: %ld\n",
665 PTR_ERR(platdata->reg_vbus));
666 return PTR_ERR(platdata->reg_vbus);
668 /* Get TPL support */
669 if (!platdata->tpl_support)
670 platdata->tpl_support =
671 of_usb_host_tpl_support(dev->of_node);
674 if (platdata->dr_mode == USB_DR_MODE_OTG) {
675 /* We can support HNP and SRP of OTG 2.0 */
676 platdata->ci_otg_caps.otg_rev = 0x0200;
677 platdata->ci_otg_caps.hnp_support = true;
678 platdata->ci_otg_caps.srp_support = true;
680 /* Update otg capabilities by DT properties */
681 ret = of_usb_update_otg_caps(dev->of_node,
682 &platdata->ci_otg_caps);
687 if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
688 platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
690 if (of_find_property(dev->of_node, "phy-clkgate-delay-us", NULL))
691 of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
692 &platdata->phy_clkgate_delay_us);
694 platdata->itc_setting = 1;
695 if (of_find_property(dev->of_node, "itc-setting", NULL)) {
696 ret = of_property_read_u32(dev->of_node, "itc-setting",
697 &platdata->itc_setting);
700 "failed to get itc-setting\n");
705 if (of_find_property(dev->of_node, "ahb-burst-config", NULL)) {
706 ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
707 &platdata->ahb_burst_config);
710 "failed to get ahb-burst-config\n");
713 platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
716 if (of_find_property(dev->of_node, "tx-burst-size-dword", NULL)) {
717 ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
718 &platdata->tx_burst_size);
721 "failed to get tx-burst-size-dword\n");
724 platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
727 if (of_find_property(dev->of_node, "rx-burst-size-dword", NULL)) {
728 ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
729 &platdata->rx_burst_size);
732 "failed to get rx-burst-size-dword\n");
735 platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
738 ext_id = ERR_PTR(-ENODEV);
739 ext_vbus = ERR_PTR(-ENODEV);
740 if (of_property_read_bool(dev->of_node, "extcon")) {
741 /* Each one of them is not mandatory */
742 ext_vbus = extcon_get_edev_by_phandle(dev, 0);
743 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
744 return PTR_ERR(ext_vbus);
746 ext_id = extcon_get_edev_by_phandle(dev, 1);
747 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
748 return PTR_ERR(ext_id);
751 cable = &platdata->vbus_extcon;
752 cable->nb.notifier_call = ci_vbus_notifier;
753 cable->edev = ext_vbus;
755 if (!IS_ERR(ext_vbus)) {
756 ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
760 cable->state = false;
763 cable = &platdata->id_extcon;
764 cable->nb.notifier_call = ci_id_notifier;
765 cable->edev = ext_id;
767 if (!IS_ERR(ext_id)) {
768 ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
770 cable->state = false;
777 static int ci_extcon_register(struct ci_hdrc *ci)
779 struct ci_hdrc_cable *id, *vbus;
782 id = &ci->platdata->id_extcon;
784 if (!IS_ERR(id->edev)) {
785 ret = extcon_register_notifier(id->edev, EXTCON_USB_HOST,
788 dev_err(ci->dev, "register ID failed\n");
793 vbus = &ci->platdata->vbus_extcon;
795 if (!IS_ERR(vbus->edev)) {
796 ret = extcon_register_notifier(vbus->edev, EXTCON_USB,
799 extcon_unregister_notifier(id->edev, EXTCON_USB_HOST,
801 dev_err(ci->dev, "register VBUS failed\n");
809 static void ci_extcon_unregister(struct ci_hdrc *ci)
811 struct ci_hdrc_cable *cable;
813 cable = &ci->platdata->id_extcon;
814 if (!IS_ERR(cable->edev))
815 extcon_unregister_notifier(cable->edev, EXTCON_USB_HOST,
818 cable = &ci->platdata->vbus_extcon;
819 if (!IS_ERR(cable->edev))
820 extcon_unregister_notifier(cable->edev, EXTCON_USB, &cable->nb);
823 static DEFINE_IDA(ci_ida);
825 struct platform_device *ci_hdrc_add_device(struct device *dev,
826 struct resource *res, int nres,
827 struct ci_hdrc_platform_data *platdata)
829 struct platform_device *pdev;
832 ret = ci_get_platdata(dev, platdata);
836 id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
840 pdev = platform_device_alloc("ci_hdrc", id);
846 pdev->dev.parent = dev;
847 pdev->dev.dma_mask = dev->dma_mask;
848 pdev->dev.dma_parms = dev->dma_parms;
849 dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
851 ret = platform_device_add_resources(pdev, res, nres);
855 ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
859 ret = platform_device_add(pdev);
866 platform_device_put(pdev);
868 ida_simple_remove(&ci_ida, id);
871 EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
873 void ci_hdrc_remove_device(struct platform_device *pdev)
876 platform_device_unregister(pdev);
877 ida_simple_remove(&ci_ida, id);
879 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
881 static inline void ci_role_destroy(struct ci_hdrc *ci)
883 ci_hdrc_gadget_destroy(ci);
884 ci_hdrc_host_destroy(ci);
886 ci_hdrc_otg_destroy(ci);
889 static void ci_get_otg_capable(struct ci_hdrc *ci)
891 if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
894 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
895 DCCPARAMS_DC | DCCPARAMS_HC)
896 == (DCCPARAMS_DC | DCCPARAMS_HC));
898 dev_dbg(ci->dev, "It is OTG capable controller\n");
899 /* Disable and clear all OTG irq */
900 hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
901 OTGSC_INT_STATUS_BITS);
905 static int ci_hdrc_probe(struct platform_device *pdev)
907 struct device *dev = &pdev->dev;
909 struct resource *res;
912 enum usb_dr_mode dr_mode;
914 if (!dev_get_platdata(dev)) {
915 dev_err(dev, "platform data missing\n");
919 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
920 base = devm_ioremap_resource(dev, res);
922 return PTR_ERR(base);
924 ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
929 ci->platdata = dev_get_platdata(dev);
930 ci->imx28_write_fix = !!(ci->platdata->flags &
931 CI_HDRC_IMX28_WRITE_FIX);
932 ci->supports_runtime_pm = !!(ci->platdata->flags &
933 CI_HDRC_SUPPORTS_RUNTIME_PM);
935 ret = hw_device_init(ci, base);
937 dev_err(dev, "can't initialize hardware\n");
941 if (ci->platdata->phy) {
942 ci->phy = ci->platdata->phy;
943 } else if (ci->platdata->usb_phy) {
944 ci->usb_phy = ci->platdata->usb_phy;
946 ci->phy = devm_phy_get(dev->parent, "usb-phy");
947 ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
949 /* if both generic PHY and USB PHY layers aren't enabled */
950 if (PTR_ERR(ci->phy) == -ENOSYS &&
951 PTR_ERR(ci->usb_phy) == -ENXIO)
954 if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy))
955 return -EPROBE_DEFER;
959 else if (IS_ERR(ci->usb_phy))
963 ret = ci_usb_phy_init(ci);
965 dev_err(dev, "unable to init phy: %d\n", ret);
969 ci->hw_bank.phys = res->start;
971 ci->irq = platform_get_irq(pdev, 0);
973 dev_err(dev, "missing IRQ\n");
978 ci_get_otg_capable(ci);
980 dr_mode = ci->platdata->dr_mode;
981 /* initialize role(s) before the interrupt is requested */
982 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
983 ret = ci_hdrc_host_init(ci);
985 dev_info(dev, "doesn't support host\n");
988 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
989 ret = ci_hdrc_gadget_init(ci);
991 dev_info(dev, "doesn't support gadget\n");
994 if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
995 dev_err(dev, "no supported roles\n");
1000 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
1001 ret = ci_hdrc_otg_init(ci);
1003 dev_err(dev, "init otg fails, ret = %d\n", ret);
1008 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
1010 ci->role = ci_otg_role(ci);
1011 /* Enable ID change irq */
1012 hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1015 * If the controller is not OTG capable, but support
1016 * role switch, the defalt role is gadget, and the
1017 * user can switch it through debugfs.
1019 ci->role = CI_ROLE_GADGET;
1022 ci->role = ci->roles[CI_ROLE_HOST]
1027 if (!ci_otg_is_fsm_mode(ci)) {
1028 /* only update vbus status for peripheral */
1029 if (ci->role == CI_ROLE_GADGET)
1030 ci_handle_vbus_change(ci);
1032 ret = ci_role_start(ci, ci->role);
1034 dev_err(dev, "can't start %s role\n",
1040 platform_set_drvdata(pdev, ci);
1041 ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1042 ci->platdata->name, ci);
1046 ret = ci_extcon_register(ci);
1050 if (ci->supports_runtime_pm) {
1051 pm_runtime_set_active(&pdev->dev);
1052 pm_runtime_enable(&pdev->dev);
1053 pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1054 pm_runtime_mark_last_busy(ci->dev);
1055 pm_runtime_use_autosuspend(&pdev->dev);
1058 if (ci_otg_is_fsm_mode(ci))
1059 ci_hdrc_otg_fsm_start(ci);
1061 device_set_wakeup_capable(&pdev->dev, true);
1063 ret = dbg_create_files(ci);
1067 ci_extcon_unregister(ci);
1069 ci_role_destroy(ci);
1071 ci_usb_phy_exit(ci);
1076 static int ci_hdrc_remove(struct platform_device *pdev)
1078 struct ci_hdrc *ci = platform_get_drvdata(pdev);
1080 if (ci->supports_runtime_pm) {
1081 pm_runtime_get_sync(&pdev->dev);
1082 pm_runtime_disable(&pdev->dev);
1083 pm_runtime_put_noidle(&pdev->dev);
1086 dbg_remove_files(ci);
1087 ci_extcon_unregister(ci);
1088 ci_role_destroy(ci);
1089 ci_hdrc_enter_lpm(ci, true);
1090 ci_usb_phy_exit(ci);
1096 /* Prepare wakeup by SRP before suspend */
1097 static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1099 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1100 !hw_read_otgsc(ci, OTGSC_ID)) {
1101 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1103 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1108 /* Handle SRP when wakeup by data pulse */
1109 static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1111 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1112 (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1113 if (!hw_read_otgsc(ci, OTGSC_ID)) {
1114 ci->fsm.a_srp_det = 1;
1115 ci->fsm.a_bus_drop = 0;
1119 ci_otg_queue_work(ci);
1123 static void ci_controller_suspend(struct ci_hdrc *ci)
1125 disable_irq(ci->irq);
1126 ci_hdrc_enter_lpm(ci, true);
1127 if (ci->platdata->phy_clkgate_delay_us)
1128 usleep_range(ci->platdata->phy_clkgate_delay_us,
1129 ci->platdata->phy_clkgate_delay_us + 50);
1130 usb_phy_set_suspend(ci->usb_phy, 1);
1132 enable_irq(ci->irq);
1135 static int ci_controller_resume(struct device *dev)
1137 struct ci_hdrc *ci = dev_get_drvdata(dev);
1139 dev_dbg(dev, "at %s\n", __func__);
1146 ci_hdrc_enter_lpm(ci, false);
1148 usb_phy_set_suspend(ci->usb_phy, 0);
1149 usb_phy_set_wakeup(ci->usb_phy, false);
1150 hw_wait_phy_stable();
1154 if (ci->wakeup_int) {
1155 ci->wakeup_int = false;
1156 pm_runtime_mark_last_busy(ci->dev);
1157 pm_runtime_put_autosuspend(ci->dev);
1158 enable_irq(ci->irq);
1159 if (ci_otg_is_fsm_mode(ci))
1160 ci_otg_fsm_wakeup_by_srp(ci);
1166 #ifdef CONFIG_PM_SLEEP
1167 static int ci_suspend(struct device *dev)
1169 struct ci_hdrc *ci = dev_get_drvdata(dev);
1172 flush_workqueue(ci->wq);
1174 * Controller needs to be active during suspend, otherwise the core
1175 * may run resume when the parent is at suspend if other driver's
1176 * suspend fails, it occurs before parent's suspend has not started,
1177 * but the core suspend has finished.
1180 pm_runtime_resume(dev);
1187 if (device_may_wakeup(dev)) {
1188 if (ci_otg_is_fsm_mode(ci))
1189 ci_otg_fsm_suspend_for_srp(ci);
1191 usb_phy_set_wakeup(ci->usb_phy, true);
1192 enable_irq_wake(ci->irq);
1195 ci_controller_suspend(ci);
1200 static int ci_resume(struct device *dev)
1202 struct ci_hdrc *ci = dev_get_drvdata(dev);
1205 if (device_may_wakeup(dev))
1206 disable_irq_wake(ci->irq);
1208 ret = ci_controller_resume(dev);
1212 if (ci->supports_runtime_pm) {
1213 pm_runtime_disable(dev);
1214 pm_runtime_set_active(dev);
1215 pm_runtime_enable(dev);
1220 #endif /* CONFIG_PM_SLEEP */
1222 static int ci_runtime_suspend(struct device *dev)
1224 struct ci_hdrc *ci = dev_get_drvdata(dev);
1226 dev_dbg(dev, "at %s\n", __func__);
1233 if (ci_otg_is_fsm_mode(ci))
1234 ci_otg_fsm_suspend_for_srp(ci);
1236 usb_phy_set_wakeup(ci->usb_phy, true);
1237 ci_controller_suspend(ci);
1242 static int ci_runtime_resume(struct device *dev)
1244 return ci_controller_resume(dev);
1247 #endif /* CONFIG_PM */
1248 static const struct dev_pm_ops ci_pm_ops = {
1249 SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1250 SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1253 static struct platform_driver ci_hdrc_driver = {
1254 .probe = ci_hdrc_probe,
1255 .remove = ci_hdrc_remove,
1262 static int __init ci_hdrc_platform_register(void)
1264 ci_hdrc_host_driver_init();
1265 return platform_driver_register(&ci_hdrc_driver);
1267 module_init(ci_hdrc_platform_register);
1269 static void __exit ci_hdrc_platform_unregister(void)
1271 platform_driver_unregister(&ci_hdrc_driver);
1273 module_exit(ci_hdrc_platform_unregister);
1275 MODULE_ALIAS("platform:ci_hdrc");
1276 MODULE_LICENSE("GPL v2");
1277 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1278 MODULE_DESCRIPTION("ChipIdea HDRC Driver");