]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - include/linux/stmmac.h
Merge remote-tracking branch 'parisc-hd/for-next'
[karo-tx-linux.git] / include / linux / stmmac.h
1 /*******************************************************************************
2
3   Header file for stmmac platform data
4
5   Copyright (C) 2009  STMicroelectronics Ltd
6
7   This program is free software; you can redistribute it and/or modify it
8   under the terms and conditions of the GNU General Public License,
9   version 2, as published by the Free Software Foundation.
10
11   This program is distributed in the hope it will be useful, but WITHOUT
12   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
14   more details.
15
16   You should have received a copy of the GNU General Public License along with
17   this program; if not, write to the Free Software Foundation, Inc.,
18   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19
20   The full GNU General Public License is included in this distribution in
21   the file called "COPYING".
22
23   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
24 *******************************************************************************/
25
26 #ifndef __STMMAC_PLATFORM_DATA
27 #define __STMMAC_PLATFORM_DATA
28
29 #include <linux/platform_device.h>
30
31 #define STMMAC_RX_COE_NONE      0
32 #define STMMAC_RX_COE_TYPE1     1
33 #define STMMAC_RX_COE_TYPE2     2
34
35 /* Define the macros for CSR clock range parameters to be passed by
36  * platform code.
37  * This could also be configured at run time using CPU freq framework. */
38
39 /* MDC Clock Selection define*/
40 #define STMMAC_CSR_60_100M      0x0     /* MDC = clk_scr_i/42 */
41 #define STMMAC_CSR_100_150M     0x1     /* MDC = clk_scr_i/62 */
42 #define STMMAC_CSR_20_35M       0x2     /* MDC = clk_scr_i/16 */
43 #define STMMAC_CSR_35_60M       0x3     /* MDC = clk_scr_i/26 */
44 #define STMMAC_CSR_150_250M     0x4     /* MDC = clk_scr_i/102 */
45 #define STMMAC_CSR_250_300M     0x5     /* MDC = clk_scr_i/122 */
46
47 /* The MDC clock could be set higher than the IEEE 802.3
48  * specified frequency limit 0f 2.5 MHz, by programming a clock divider
49  * of value different than the above defined values. The resultant MDIO
50  * clock frequency of 12.5 MHz is applicable for the interfacing chips
51  * supporting higher MDC clocks.
52  * The MDC clock selection macros need to be defined for MDC clock rate
53  * of 12.5 MHz, corresponding to the following selection.
54  */
55 #define STMMAC_CSR_I_4          0x8     /* clk_csr_i/4 */
56 #define STMMAC_CSR_I_6          0x9     /* clk_csr_i/6 */
57 #define STMMAC_CSR_I_8          0xA     /* clk_csr_i/8 */
58 #define STMMAC_CSR_I_10         0xB     /* clk_csr_i/10 */
59 #define STMMAC_CSR_I_12         0xC     /* clk_csr_i/12 */
60 #define STMMAC_CSR_I_14         0xD     /* clk_csr_i/14 */
61 #define STMMAC_CSR_I_16         0xE     /* clk_csr_i/16 */
62 #define STMMAC_CSR_I_18         0xF     /* clk_csr_i/18 */
63
64 /* AXI DMA Burst length supported */
65 #define DMA_AXI_BLEN_4          (1 << 1)
66 #define DMA_AXI_BLEN_8          (1 << 2)
67 #define DMA_AXI_BLEN_16         (1 << 3)
68 #define DMA_AXI_BLEN_32         (1 << 4)
69 #define DMA_AXI_BLEN_64         (1 << 5)
70 #define DMA_AXI_BLEN_128        (1 << 6)
71 #define DMA_AXI_BLEN_256        (1 << 7)
72 #define DMA_AXI_BLEN_ALL (DMA_AXI_BLEN_4 | DMA_AXI_BLEN_8 | DMA_AXI_BLEN_16 \
73                         | DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
74                         | DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
75
76 /* Platfrom data for platform device structure's platform_data field */
77
78 struct stmmac_mdio_bus_data {
79         int (*phy_reset)(void *priv);
80         unsigned int phy_mask;
81         int *irqs;
82         int probed_phy_irq;
83 #ifdef CONFIG_OF
84         int reset_gpio, active_low;
85         u32 delays[3];
86 #endif
87 };
88
89 struct stmmac_dma_cfg {
90         int pbl;
91         int fixed_burst;
92         int mixed_burst;
93         int burst_len;
94 };
95
96 struct plat_stmmacenet_data {
97         char *phy_bus_name;
98         int bus_id;
99         int phy_addr;
100         int interface;
101         struct stmmac_mdio_bus_data *mdio_bus_data;
102         struct device_node *phy_node;
103         struct stmmac_dma_cfg *dma_cfg;
104         int clk_csr;
105         int has_gmac;
106         int enh_desc;
107         int tx_coe;
108         int rx_coe;
109         int bugged_jumbo;
110         int pmt;
111         int force_sf_dma_mode;
112         int force_thresh_dma_mode;
113         int riwt_off;
114         int max_speed;
115         int maxmtu;
116         int multicast_filter_bins;
117         int unicast_filter_entries;
118         int tx_fifo_size;
119         int rx_fifo_size;
120         void (*fix_mac_speed)(void *priv, unsigned int speed);
121         void (*bus_setup)(void __iomem *ioaddr);
122         int (*init)(struct platform_device *pdev, void *priv);
123         void (*exit)(struct platform_device *pdev, void *priv);
124         void *bsp_priv;
125 };
126 #endif