acpi= [HW,ACPI,X86,ARM64]
Advanced Configuration and Power Interface
- Format: { force | off | strict | noirq | rsdt }
+ Format: { force | off | strict | noirq | rsdt |
+ copy_dsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
The filter can be disabled or changed to another
driver later using sysfs.
- drm_kms_helper.edid_firmware=[<connector>:]<file>
- Broken monitors, graphic adapters and KVMs may
- send no or incorrect EDID data sets. This parameter
- allows to specify an EDID data set in the
- /lib/firmware directory that is used instead.
+ drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
+ Broken monitors, graphic adapters, KVMs and EDIDless
+ panels may send no or incorrect EDID data sets.
+ This parameter allows to specify an EDID data sets
+ in the /lib/firmware directory that are used instead.
Generic built-in EDID data sets are used, if one of
edid/1024x768.bin, edid/1280x1024.bin,
edid/1680x1050.bin, or edid/1920x1080.bin is given
available in Documentation/EDID/HOWTO.txt. An EDID
data set will only be used for a particular connector,
if its name and a colon are prepended to the EDID
- name.
+ name. Each connector may use a unique EDID data
+ set by separating the files with a comma. An EDID
+ data set with no connector name will be used for
+ any connectors not explicitly specified.
dscc4.setup= [NET]
you are really sure that your UEFI does sane gc and
fulfills the spec otherwise your board may brick.
+ efi_fake_mem= nn[KMG]@ss[KMG]:aa[,nn[KMG]@ss[KMG]:aa,..] [EFI; X86]
+ Add arbitrary attribute to specific memory range by
+ updating original EFI memory map.
+ Region of memory which aa attribute is added to is
+ from ss to ss+nn.
+ If efi_fake_mem=2G@4G:0x10000,2G@0x10a0000000:0x10000
+ is specified, EFI_MEMORY_MORE_RELIABLE(0x10000)
+ attribute is added to range 0x100000000-0x180000000 and
+ 0x10a0000000-0x1120000000.
+
+ Using this parameter you can do debugging of EFI memmap
+ related feature. For example, you can do debugging of
+ Address Range Mirroring feature even if your box
+ doesn't support it.
+
eisa_irq_edge= [PARISC,HW]
See header of drivers/parisc/eisa.c.
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
+ no_acpi
+ Don't use ACPI processor performance control objects
+ _PSS and _PPC specified limits.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
cache-to-cache transfer latencies.
rcutree.rcu_fanout_leaf= [KNL]
- Increase the number of CPUs assigned to each
- leaf rcu_node structure. Useful for very large
- systems.
+ Change the number of CPUs assigned to each
+ leaf rcu_node structure. Useful for very
+ large systems, which will choose the value 64,
+ and for NUMA systems with large remote-access
+ latencies, which will choose a value aligned
+ with the appropriate hardware boundaries.
rcutree.jiffies_till_sched_qs= [KNL]
Set required age in jiffies for a