PCI: pciehp: Handle invalid data when reading from non-existent devices

It's platform-dependent, but an MMIO read to a non-existent PCI device
generally returns data with all bits set.  This happens when the host
bridge or Root Complex times out waiting for a response from the device and
fabricates return data to complete the CPU's read.

One example, reported in the bugzilla below, involved this hierarchy:

  pci 0000:00:1c.0: PCI bridge to [bus 02-3a] Root Port
  pci 0000:02:00.0: PCI bridge to [bus 03-0a] Upstream Port
  pci 0000:03:03.0: PCI bridge to [bus 05-07] Downstream Port
  pci 0000:05:00.0: PCI bridge to [bus 06-07] Thunderbolt Upstream Port
  pci 0000:06:00.0: PCI bridge to [bus 07]    Thunderbolt Downstream Port
  pci 0000:07:00.0: BCM57762 NIC

Unplugging the Thunderbolt switch and the NIC below it resulted in this:

  pciehp 0000:03:03.0: Surprise Removal
  tg3 0000:07:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff
  pciehp 0000:06:00.0: unloading service driver pciehp
  pciehp 0000:06:00.0: pcie_isr: intr_loc 11f
  pciehp 0000:06:00.0: Switch interrupt received
  pciehp 0000:06:00.0: Latch open on Slot
  pciehp 0000:06:00.0: Attention button interrupt received
  pciehp 0000:06:00.0: Button pressed on Slot
  pciehp 0000:06:00.0: Presence/Notify input change
  pciehp 0000:06:00.0: Card present on Slot
  pciehp 0000:06:00.0: Power fault interrupt received
  pciehp 0000:06:00.0: Data Link Layer State change
  pciehp 0000:06:00.0: Link Up event

The pciehp driver correctly noticed that the Thunderbolt switch (05:00.0
and 06:00.0) and NIC (07:00.0) had been removed, and it called their driver
remove methods.

Since the NIC was already gone, tg3 received 0xffffffff when it tried to
read from the device.  The resulting timeout is a tg3 issue and not of
interest here.

Similarly, since the 06:00.0 Thunderbolt switch was already gone,
pcie_isr() received 0xffff when it tried to read PCI_EXP_SLTSTA, and pciehp
thought that was valid status showing that many events had happened: the
latch had been opened, the attention button had been pressed, a card was
now present, and the link was now up.  These are all wrong, of course, but
pciehp went on to try to power up and enumerate devices below the
non-existent bridge:

  pciehp 0000:06:00.0: PCI slot - powering on due to button press
  pciehp 0000:06:00.0: Surprise Insertion
  pci 0000:07:00.0 id reading try 50 times with interval 20 ms to get ffffffff

[bhelgaas: changelog, also check in pcie_poll_cmd() & pcie_do_write_cmd()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99841
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index daf54bee720d4e0f9cbccab1a2b0f2a2fdbca691..8f3d3cff3581b72ad7d384900e44a7394c4aa7a4 100644 (file)
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -111,6 +111,12 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
 
        while (true) {
                pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
+               if (slot_status == (u16) ~0) {
+                       ctrl_info(ctrl, "%s: no response from device\n",
+                                 __func__);
+                       return 0;
+               }
+
                if (slot_status & PCI_EXP_SLTSTA_CC) {
                        pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
                                                   PCI_EXP_SLTSTA_CC);
@@ -186,6 +192,11 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
        pcie_wait_cmd(ctrl);
 
        pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
+       if (slot_ctrl == (u16) ~0) {
+               ctrl_info(ctrl, "%s: no response from device\n", __func__);
+               goto out;
+       }
+
        slot_ctrl &= ~mask;
        slot_ctrl |= (cmd & mask);
        ctrl->cmd_busy = 1;
@@ -201,6 +212,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
        if (wait)
                pcie_wait_cmd(ctrl);
 
+out:
        mutex_unlock(&ctrl->ctrl_lock);
 }
 
@@ -542,6 +554,11 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
        intr_loc = 0;
        do {
                pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &detected);
+               if (detected == (u16) ~0) {
+                       ctrl_info(ctrl, "%s: no response from device\n",
+                                 __func__);
+                       return IRQ_HANDLED;
+               }
 
                detected &= (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
                             PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |