extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
extra-$(CONFIG_PPC64) += entry_64.o
-extra-$(CONFIG_PPC_FPU) += fpu.o
extra-y += vmlinux.lds
obj-y += process.o init_task.o time.o \
# stuff used from here for ARCH=ppc or ARCH=ppc64
obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o
-fpux-$(CONFIG_PPC32) += fpu.o
-extra-$(CONFIG_PPC_FPU) += $(fpux-y)
endif
+
+extra-$(CONFIG_PPC_FPU) += fpu.o
addi r4,r4,THREAD /* want last_task_used_math->thread */
SAVE_32FPRS(0, r4)
mffs fr0
- stfd fr0,THREAD_FPSCR-4(r4)
+ stfd fr0,THREAD_FPSCR(r4)
LDL r5,PT_REGS(r4)
tophys(r5,r5)
LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
or r12,r12,r4
std r12,_MSR(r1)
#endif
- lfd fr0,THREAD_FPSCR-4(r5)
+ lfd fr0,THREAD_FPSCR(r5)
mtfsf 0xff,fr0
REST_32FPRS(0, r5)
#ifndef CONFIG_SMP
CMPI 0,r5,0
SAVE_32FPRS(0, r3)
mffs fr0
- stfd fr0,THREAD_FPSCR-4(r3)
+ stfd fr0,THREAD_FPSCR(r3)
beq 1f
LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
li r3,MSR_FP|MSR_FE0|MSR_FE1
STL r5,OFF(last_task_used_math)(r4)
#endif /* CONFIG_SMP */
blr
+
+/*
+ * These are used in the alignment trap handler when emulating
+ * single-precision loads and stores.
+ * We restore and save the fpscr so the task gets the same result
+ * and exceptions as if the cpu had performed the load or store.
+ */
+
+_GLOBAL(cvt_fd)
+ lfd 0,THREAD_FPSCR(r5) /* load up fpscr value */
+ mtfsf 0xff,0
+ lfs 0,0(r3)
+ stfd 0,0(r4)
+ mffs 0
+ stfd 0,THREAD_FPSCR(r5) /* save new fpscr value */
+ blr
+
+_GLOBAL(cvt_df)
+ lfd 0,THREAD_FPSCR(r5) /* load up fpscr value */
+ mtfsf 0xff,0
+ lfd 0,0(r3)
+ stfs 0,0(r4)
+ mffs 0
+ stfd 0,THREAD_FPSCR(r5) /* save new fpscr value */
+ blr
mr r3,r1 /* Close enough */
blr
-/*
- * These are used in the alignment trap handler when emulating
- * single-precision loads and stores.
- * We restore and save the fpscr so the task gets the same result
- * and exceptions as if the cpu had performed the load or store.
- */
-
-#ifdef CONFIG_PPC_FPU
-_GLOBAL(cvt_fd)
- lfd 0,-4(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfs 0,0(r3)
- stfd 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,-4(r5)
- blr
-
-_GLOBAL(cvt_df)
- lfd 0,-4(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfd 0,0(r3)
- stfs 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,-4(r5)
- blr
-#endif
-
/*
* Create a kernel thread
* kernel_thread(fn, arg, flags)
sync
blr
-
-_GLOBAL(cvt_fd)
- lfd 0,0(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfs 0,0(r3)
- stfd 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,0(r5)
- blr
-
-_GLOBAL(cvt_df)
- lfd 0,0(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfd 0,0(r3)
- stfs 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,0(r5)
- blr
-
/*
* identify_cpu and calls setup_cpu
* In: r3 = base of the cpu_specs array
#endif
#endif /* CONFIG_SMP */
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
- current->thread.fpscr = 0;
+ current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
memset(current->thread.vr, 0, sizeof(current->thread.vr));
memset(¤t->thread.vscr, 0, sizeof(current->thread.vscr));
ELF_NFPREG * sizeof(double)))
return 1;
- current->thread.fpscr = 0; /* turn off all fp exceptions */
+ current->thread.fpscr.val = 0; /* turn off all fp exceptions */
#ifdef CONFIG_ALTIVEC
/* save altivec registers */
flush_fp_to_thread(current);
- fpscr = current->thread.fpscr;
+ fpscr = current->thread.fpscr.val;
/* Invalid operation */
if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX))
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
- cvt_fd(&data.f, &data.d, ¤t->thread.fpscr);
+ cvt_fd(&data.f, &data.d, ¤t->thread);
preempt_enable();
#else
return 0;
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
- cvt_df(&data.d, &data.f, ¤t->thread.fpscr);
+ cvt_df(&data.d, &data.f, ¤t->thread);
preempt_enable();
#else
return 0;
mr r3,r1 /* Close enough */
blr
-/*
- * These are used in the alignment trap handler when emulating
- * single-precision loads and stores.
- * We restore and save the fpscr so the task gets the same result
- * and exceptions as if the cpu had performed the load or store.
- */
-
-#ifdef CONFIG_PPC_FPU
-_GLOBAL(cvt_fd)
- lfd 0,-4(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfs 0,0(r3)
- stfd 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,-4(r5)
- blr
-
-_GLOBAL(cvt_df)
- lfd 0,-4(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfd 0,0(r3)
- stfs 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,-4(r5)
- blr
-#endif
-
/*
* Create a kernel thread
* kernel_thread(fn, arg, flags)
last_task_used_spe = NULL;
#endif
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
- current->thread.fpscr = 0;
+ current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
memset(current->thread.vr, 0, sizeof(current->thread.vr));
memset(¤t->thread.vscr, 0, sizeof(current->thread.vscr));
giveup_fpu(current);
preempt_enable();
- fpscr = current->thread.fpscr;
+ fpscr = current->thread.fpscr.val;
fpscr &= fpscr << 22; /* mask summary bits with enables */
if (fpscr & FPSCR_VX)
code = FPE_FLTINV;
#include <linux/kernel.h>
#include <linux/sched.h>
-#define __FPU_FPSCR (current->thread.fpscr)
+#define __FPU_FPSCR (current->thread.fpscr.val)
/* We only actually write to the destination register
* if exceptions signalled (if any) will not trap.
config POWER4
def_bool y
+config PPC_FPU
+ def_bool y
+
config POWER4_ONLY
bool "Optimize for POWER4"
default n
CFLAGS += $(call cc-option,-funit-at-a-time)
head-y := arch/ppc64/kernel/head.o
+head-y += arch/powerpc/kernel/fpu.o
libs-y += arch/ppc64/lib/
core-y += arch/ppc64/kernel/ arch/powerpc/kernel/
/* Doing stfs, have to convert to single */
preempt_disable();
enable_kernel_fp();
- cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread.fpscr);
+ cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread);
disable_kernel_fp();
preempt_enable();
}
/* Doing lfs, have to convert to double */
preempt_disable();
enable_kernel_fp();
- cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread.fpscr);
+ cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread);
disable_kernel_fp();
preempt_enable();
}
_GLOBAL(__start)
/* NOP this out unconditionally */
BEGIN_FTR_SECTION
- b .__start_initialization_multiplatform
+ b .__start_initialization_multiplatform
END_FTR_SECTION(0, 1)
#endif /* CONFIG_PPC_MULTIPLATFORM */
* any task or sent any task a signal, you should use
* ret_from_except or ret_from_except_lite instead of this.
*/
+ .globl fast_exception_return
fast_exception_return:
ld r12,_MSR(r1)
ld r11,_NIP(r1)
bl .kernel_fp_unavailable_exception
BUG_OPCODE
-/*
- * load_up_fpu(unused, unused, tsk)
- * Disable FP for the task which had the FPU previously,
- * and save its floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- * On SMP we know the fpu is free, since we give it up every
- * switch (ie, no lazy save of the FP registers).
- * On entry: r13 == 'current' && last_task_used_math != 'current'
- */
-_STATIC(load_up_fpu)
- mfmsr r5 /* grab the current MSR */
- ori r5,r5,MSR_FP
- mtmsrd r5 /* enable use of fpu now */
- isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_fpu in switch_to.
- *
- */
-#ifndef CONFIG_SMP
- ld r3,last_task_used_math@got(r2)
- ld r4,0(r3)
- cmpdi 0,r4,0
- beq 1f
- /* Save FP state to last_task_used_math's THREAD struct */
- addi r4,r4,THREAD
- SAVE_32FPRS(0, r4)
- mffs fr0
- stfd fr0,THREAD_FPSCR(r4)
- /* Disable FP for last_task_used_math */
- ld r5,PT_REGS(r4)
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r6,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r6
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of FP after return */
- ld r4,PACACURRENT(r13)
- addi r5,r4,THREAD /* Get THREAD */
- ld r4,THREAD_FPEXC_MODE(r5)
- ori r12,r12,MSR_FP
- or r12,r12,r4
- std r12,_MSR(r1)
- lfd fr0,THREAD_FPSCR(r5)
- mtfsf 0xff,fr0
- REST_32FPRS(0, r5)
-#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
- subi r4,r5,THREAD /* Back to 'current' */
- std r4,0(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- b fast_exception_return
-
.align 7
.globl altivec_unavailable_common
altivec_unavailable_common:
sync
blr
-
-_GLOBAL(cvt_fd)
- lfd 0,0(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfs 0,0(r3)
- stfd 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,0(r5)
- blr
-
-_GLOBAL(cvt_df)
- lfd 0,0(r5) /* load up fpscr value */
- mtfsf 0xff,0
- lfd 0,0(r3)
- stfs 0,0(r4)
- mffs 0 /* save new fpscr value */
- stfd 0,0(r5)
- blr
-
/*
* identify_cpu and calls setup_cpu
* In: r3 = base of the cpu_specs array
isync
blr
-/*
- * giveup_fpu(tsk)
- * Disable FP for the task given as the argument,
- * and save the floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- */
-_GLOBAL(giveup_fpu)
- mfmsr r5
- ori r5,r5,MSR_FP
- mtmsrd r5 /* enable use of fpu now */
- isync
- cmpdi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- ld r5,PT_REGS(r3)
- cmpdi 0,r5,0
- SAVE_32FPRS(0, r3)
- mffs fr0
- stfd fr0,THREAD_FPSCR(r3)
- beq 1f
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r3,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r3 /* disable FP for previous task */
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- ld r4,last_task_used_math@got(r2)
- std r5,0(r4)
-#endif /* CONFIG_SMP */
- blr
-
#ifdef CONFIG_ALTIVEC
#if 0 /* this has no callers for now */
flush_fp_to_thread(current);
/* Make sure signal doesn't get spurrious FP exceptions */
- current->thread.fpscr = 0;
+ current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
err |= __put_user(v_regs, &sc->v_regs);
unsigned long dbcr1;
#endif
double fpr[32]; /* Complete floating point set */
-#ifdef CONFIG_PPC32
- unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */
-#endif
- unsigned long fpscr; /* Floating point status */
+ struct { /* fpr ... fpscr must be contiguous */
+
+ unsigned int pad;
+ unsigned int val; /* Floating point status */
+ } fpscr;
int fpexc_mode; /* floating-point exception mode */
#ifdef CONFIG_PPC64
unsigned long start_tb; /* Start purr when proc switched in */
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
.fs = KERNEL_DS, \
.fpr = {0}, \
- .fpscr = 0, \
+ .fpscr = { .val = 0, }, \
.fpexc_mode = MSR_FE0|MSR_FE1, \
}
#endif
extern void giveup_spe(struct task_struct *);
extern void load_up_spe(struct task_struct *);
extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
-extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
#ifdef CONFIG_ALTIVEC
extern void flush_altivec_to_thread(struct task_struct *);
extern void giveup_spe(struct task_struct *);
extern void load_up_spe(struct task_struct *);
extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
-extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
#ifdef CONFIG_ALTIVEC
extern void flush_altivec_to_thread(struct task_struct *);
extern void disable_kernel_altivec(void);
extern void enable_kernel_altivec(void);
extern int emulate_altivec(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
-extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
#ifdef CONFIG_ALTIVEC
extern void flush_altivec_to_thread(struct task_struct *);
projects / karo-tx-linux.git / commitdiff