arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file

This cosmetic patch reorder nodes under internal-regs by increasing
address order, as expected.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 317d13784b80c8b4be0b2870ae11a9d4a147ab46..6fe8972de0a219688fe76c1d0c0cb0944056270f 100644 (file)
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -96,54 +96,11 @@
                                status = "disabled";
                        };
 
-                       /* Two rear eSATA ports */
-                       sata@a0000 {
-                               nr-ports = <2>;
-                               status = "okay";
-                       };
-
-                       serial@12000 {
-                               status = "okay";
-                       };
-
-                       mdio {
-                               phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-                                       reg = <0>;
-                               };
-
-                               phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-                                       reg = <1>;
-                               };
-                       };
-
-                       ethernet@70000 {
-                               status = "okay";
-                               phy = <&phy0>;
-                               phy-mode = "rgmii-id";
-                       };
-
-                       ethernet@74000 {
-                               status = "okay";
-                               phy = <&phy1>;
-                               phy-mode = "rgmii-id";
-                       };
-
-                       /* Front USB 2.0 port */
-                       usb@50000 {
-                               status = "okay";
-                       };
-
                        i2c@11000 {
                                compatible = "marvell,mv64xxx-i2c";
                                clock-frequency = <400000>;
                                status = "okay";
 
-                               isl12057: isl12057@68 {
-                                       compatible = "isil,isl12057";
-                                       reg = <0x68>;
-                                       isil,irq2-can-wakeup-machine;
-                               };
-
                                /* Controller for rear fan #1 of 3 (Protechnic
                                 * MGT4012XB-O20, 8000RPM) near eSATA port */
                                g762_fan1: g762@3e {
@@ -180,6 +137,49 @@
                                        compatible = "gmt,g751";
                                        reg = <0x4c>;
                                };
+
+                               isl12057: isl12057@68 {
+                                       compatible = "isil,isl12057";
+                                       reg = <0x68>;
+                                       isil,irq2-can-wakeup-machine;
+                               };
+                       };
+
+                       serial@12000 {
+                               status = "okay";
+                       };
+
+                       /* Front USB 2.0 port */
+                       usb@50000 {
+                               status = "okay";
+                       };
+
+                       mdio {
+                               phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+                                       reg = <0>;
+                               };
+
+                               phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+                                       reg = <1>;
+                               };
+                       };
+
+                       ethernet@70000 {
+                               status = "okay";
+                               phy = <&phy0>;
+                               phy-mode = "rgmii-id";
+                       };
+
+                       ethernet@74000 {
+                               status = "okay";
+                               phy = <&phy1>;
+                               phy-mode = "rgmii-id";
+                       };
+
+                       /* Two rear eSATA ports */
+                       sata@a0000 {
+                               nr-ports = <2>;
+                               status = "okay";
                        };
 
                        nand@d0000 {