acpi= [HW,ACPI,X86,ARM64]
Advanced Configuration and Power Interface
- Format: { force | off | strict | noirq | rsdt }
+ Format: { force | off | strict | noirq | rsdt |
+ copy_dsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
is passed, kernel could allocate physical memory region
above 4G, that cause second kernel crash on system
that require some amount of low memory, e.g. swiotlb
- requires at least 64M+32K low memory. Kernel would
- try to allocate 72M below 4G automatically.
+ requires at least 64M+32K low memory, also enough extra
+ low memory is needed to make sure DMA buffers for 32-bit
+ devices won't run out. Kernel would try to allocate at
+ at least 256M below 4G automatically.
This one let user to specify own low range under 4G
for second kernel instead.
0: to disable low allocation.
The filter can be disabled or changed to another
driver later using sysfs.
- drm_kms_helper.edid_firmware=[<connector>:]<file>
- Broken monitors, graphic adapters and KVMs may
- send no or incorrect EDID data sets. This parameter
- allows to specify an EDID data set in the
- /lib/firmware directory that is used instead.
+ drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
+ Broken monitors, graphic adapters, KVMs and EDIDless
+ panels may send no or incorrect EDID data sets.
+ This parameter allows to specify an EDID data sets
+ in the /lib/firmware directory that are used instead.
Generic built-in EDID data sets are used, if one of
edid/1024x768.bin, edid/1280x1024.bin,
edid/1680x1050.bin, or edid/1920x1080.bin is given
available in Documentation/EDID/HOWTO.txt. An EDID
data set will only be used for a particular connector,
if its name and a colon are prepended to the EDID
- name.
+ name. Each connector may use a unique EDID data
+ set by separating the files with a comma. An EDID
+ data set with no connector name will be used for
+ any connectors not explicitly specified.
dscc4.setup= [NET]
earlycon= [KNL] Output early console device and options.
+ When used with no options, the early console is
+ determined by the stdout-path property in device
+ tree's chosen node.
+
cdns,<addr>
Start an early, polled-mode console on a cadence serial
port at the specified address. The cadence serial port
you are really sure that your UEFI does sane gc and
fulfills the spec otherwise your board may brick.
+ efi_fake_mem= nn[KMG]@ss[KMG]:aa[,nn[KMG]@ss[KMG]:aa,..] [EFI; X86]
+ Add arbitrary attribute to specific memory range by
+ updating original EFI memory map.
+ Region of memory which aa attribute is added to is
+ from ss to ss+nn.
+ If efi_fake_mem=2G@4G:0x10000,2G@0x10a0000000:0x10000
+ is specified, EFI_MEMORY_MORE_RELIABLE(0x10000)
+ attribute is added to range 0x100000000-0x180000000 and
+ 0x10a0000000-0x1120000000.
+
+ Using this parameter you can do debugging of EFI memmap
+ related feature. For example, you can do debugging of
+ Address Range Mirroring feature even if your box
+ doesn't support it.
+
eisa_irq_edge= [PARISC,HW]
See header of drivers/parisc/eisa.c.
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
+ no_acpi
+ Don't use ACPI processor performance control objects
+ _PSS and _PPC specified limits.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
Format: [panic,][nopanic,][num]
Valid num: 0 or 1
- 0 - turn nmi_watchdog off
- 1 - turn nmi_watchdog on
+ 0 - turn hardlockup detector in nmi_watchdog off
+ 1 - turn hardlockup detector in nmi_watchdog on
When panic is specified, panic when an NMI watchdog
timeout occurs (or 'nopanic' to override the opposite
- default).
+ default). To disable both hard and soft lockup detectors,
+ please see 'nowatchdog'.
This is useful when you use a panic=... timeout and
need the box quickly up again.
cache-to-cache transfer latencies.
rcutree.rcu_fanout_leaf= [KNL]
- Increase the number of CPUs assigned to each
- leaf rcu_node structure. Useful for very large
- systems.
+ Change the number of CPUs assigned to each
+ leaf rcu_node structure. Useful for very
+ large systems, which will choose the value 64,
+ and for NUMA systems with large remote-access
+ latencies, which will choose a value aligned
+ with the appropriate hardware boundaries.
rcutree.jiffies_till_sched_qs= [KNL]
Set required age in jiffies for a
S: Maintained
F: drivers/hwmon/abituguru3.c
+ACCES 104-IDIO-16 GPIO DRIVER
+M: "William Breathitt Gray" <vilhelm.gray@gmail.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-104-idio-16.c
+
ACENIC DRIVER
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
F: drivers/hwmon/fam15h_power.c
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Orphan
F: drivers/usb/gadget/udc/amd5536udc.*
AMD GEODE PROCESSOR/CHIPSET SUPPORT
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
-AMD MICROCODE UPDATE SUPPORT
-M: Borislav Petkov <bp@alien8.de>
-S: Maintained
-F: arch/x86/kernel/cpu/microcode/amd*
-
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
F: drivers/net/appletalk/
F: net/appletalk/
+APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
+M: Duc Dang <dhdang@apm.com>
+S: Supported
+F: arch/arm64/boot/dts/apm/
+
APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
M: Iyappan Subramanian <isubramanian@apm.com>
M: Keyur Chudgar <kchudgar@apm.com>
F: drivers/video/fbdev/arcfb.c
F: drivers/video/fbdev/core/fb_defio.c
+ARCNET NETWORK LAYER
+M: Michael Grzeschik <m.grzeschik@pengutronix.de>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/arcnet/
+F: include/uapi/linux/if_arcnet.h
+
ARM MFM AND FLOPPY DRIVERS
M: Ian Molton <spyro@f2s.com>
S: Maintained
ARM PMU PROFILING AND DEBUGGING
M: Will Deacon <will.deacon@arm.com>
+R: Mark Rutland <mark.rutland@arm.com>
S: Maintained
-F: arch/arm/kernel/perf_*
+F: arch/arm*/kernel/perf_*
F: arch/arm/oprofile/common.c
-F: arch/arm/kernel/hw_breakpoint.c
-F: arch/arm/include/asm/hw_breakpoint.h
-F: arch/arm/include/asm/perf_event.h
+F: arch/arm*/kernel/hw_breakpoint.c
+F: arch/arm*/include/asm/hw_breakpoint.h
+F: arch/arm*/include/asm/perf_event.h
F: drivers/perf/arm_pmu.c
F: include/linux/perf/arm_pmu.h
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
+M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-N: sun[x4567]i
+N: sun[x456789]i
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
S: Maintained
F: arch/arm/mach-alpine/
-ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
+ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
M: Joachim Eastwood <manabian@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: arch/arm/boot/dts/lpc43*
+F: drivers/clk/nxp/clk-lpc18xx*
+F: drivers/clocksource/time-lpc32xx.c
+F: drivers/i2c/busses/i2c-lpc2k.c
+F: drivers/memory/pl172.c
+F: drivers/mtd/spi-nor/nxp-spifi.c
+F: drivers/rtc/rtc-lpc24xx.c
N: lpc18xx
ARM/MAGICIAN MACHINE SUPPORT
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
F: drivers/spi/spi-s3c*
+F: drivers/soc/samsung/*
F: sound/soc/samsung/*
+F: Documentation/arm/Samsung/
+F: Documentation/devicetree/bindings/arm/samsung/
+F: Documentation/devicetree/bindings/sram/samsung-sram.txt
+F: Documentation/devicetree/bindings/power/pd-samsung.txt
N: exynos
ARM/SAMSUNG MOBILE MACHINE SUPPORT
S: Maintained
F: drivers/media/platform/s5p-tv/
+ARM/SAMSUNG S5P SERIES JPEG CODEC SUPPORT
+M: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+M: Jacek Anaszewski <j.anaszewski@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/platform/s5p-jpeg/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Magnus Damm <magnus.damm@gmail.com>
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
-F: arch/arm/configs/bockw_defconfig
-F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/
S: Maintained
F: arch/arm/mach-sti/
F: arch/arm/boot/dts/sti*
+F: drivers/char/hw_random/st-rng.c
F: drivers/clocksource/arm_global_timer.c
F: drivers/clocksource/clksrc_st_lpc.c
F: drivers/i2c/busses/i2c-st.c
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/uniphier*
+F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
+F: arch/arm/mm/cache-uniphier.c
+F: drivers/i2c/busses/i2c-uniphier*
F: drivers/pinctrl/uniphier/
F: drivers/tty/serial/8250/8250_uniphier.c
N: uniphier
F: Documentation/aoe/
F: drivers/block/aoe/
+ATHEROS 71XX/9XXX GPIO DRIVER
+M: Alban Bedel <albeu@free.fr>
+W: https://github.com/AlbanBedel/linux
+T: git git://github.com/AlbanBedel/linux
+S: Maintained
+F: drivers/gpio/gpio-ath79.c
+F: Documentation/devicetree/bindings/gpio/gpio-ath79.txt
+
ATHEROS ATH GENERIC UTILITIES
M: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/scsi/bnx2i/
-BROADCOM CYGNUS/IPROC ARM ARCHITECTURE
+BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
+M: Jon Mason <jonmason@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/cygnus-linux.git
S: Maintained
N: iproc
N: cygnus
+N: nsp
N: bcm9113*
N: bcm9583*
-N: bcm583*
+N: bcm9585*
+N: bcm9586*
+N: bcm988312
N: bcm113*
+N: bcm583*
+N: bcm585*
+N: bcm586*
+N: bcm88312
BROADCOM BRCMSTB GPIO DRIVER
M: Gregory Fong <gregory.0xf0@gmail.com>
F: drivers/net/ethernet/cisco/enic/
CISCO VIC LOW LATENCY NIC DRIVER
-M: Upinder Malhi <umalhi@cisco.com>
+M: Christian Benvenuti <benve@cisco.com>
+M: Dave Goodell <dgoodell@cisco.com>
S: Supported
-F: drivers/infiniband/hw/usnic
+F: drivers/infiniband/hw/usnic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
M: Hartley Sweeten <hsweeten@visionengravers.com>
W: http://www.dialog-semiconductor.com/products
S: Supported
F: Documentation/hwmon/da90??
+F: Documentation/devicetree/bindings/sound/da[79]*.txt
F: drivers/gpio/gpio-da90??.c
F: drivers/hwmon/da90??-hwmon.c
F: drivers/iio/adc/da91??-*.c
DIGI EPCA PCI PRODUCTS
M: Lidza Louina <lidza.louina@gmail.com>
-M: Mark Hounschell <markh@compro.net>
M: Daeseok Youn <daeseok.youn@gmail.com>
L: driverdev-devel@linuxdriverproject.org
S: Maintained
L: linux-doc@vger.kernel.org
S: Maintained
F: Documentation/
+ F: scripts/docproc.c
+ F: scripts/kernel-doc*
X: Documentation/ABI/
X: Documentation/devicetree/
X: Documentation/acpi
X: Documentation/power
X: Documentation/spi
X: Documentation/DocBook/media
- T: git git://git.lwn.net/linux-2.6.git docs-next
+ T: git git://git.lwn.net/linux.git docs-next
DOUBLETALK DRIVER
M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
M: Jani Nikula <jani.nikula@linux.intel.com>
L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
+W: https://01.org/linuxgraphics/
Q: http://patchwork.freedesktop.org/project/intel-gfx/
T: git git://anongit.freedesktop.org/drm-intel
S: Supported
F: include/drm/i915*
F: include/uapi/drm/i915*
+DRM DRIVERS FOR ATMEL HLCDC
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+L: dri-devel@lists.freedesktop.org
+S: Supported
+F: drivers/gpu/drm/atmel-hlcdc/
+F: Documentation/devicetree/bindings/drm/atmel/
+
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
M: Joonyoung Shim <jy0922.shim@samsung.com>
F: drivers/gpu/drm/imx/
F: Documentation/devicetree/bindings/drm/imx/
+DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
+M: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
+L: dri-devel@lists.freedesktop.org
+T: git git://github.com/patjak/drm-gma500
+S: Maintained
+F: drivers/gpu/drm/gma500
+F: include/drm/gma500*
+
DRM DRIVERS FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
M: Terje Bergström <tbergstrom@nvidia.com>
F: sound/usb/misc/ua101.c
EXTENSIBLE FIRMWARE INTERFACE (EFI)
-M: Matt Fleming <matt.fleming@intel.com>
+M: Matt Fleming <matt@codeblueprint.co.uk>
L: linux-efi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
S: Maintained
EFI VARIABLE FILESYSTEM
M: Matthew Garrett <matthew.garrett@nebula.com>
M: Jeremy Kerr <jk@ozlabs.org>
-M: Matt Fleming <matt.fleming@intel.com>
+M: Matt Fleming <matt@codeblueprint.co.uk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
L: linux-efi@vger.kernel.org
S: Maintained
S: Maintained
F: drivers/net/ethernet/freescale/ucc_geth*
+FREESCALE eTSEC ETHERNET DRIVER (GIANFAR)
+M: Claudiu Manoil <claudiu.manoil@freescale.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/freescale/gianfar*
+X: drivers/net/ethernet/freescale/gianfar_ptp.c
+F: Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+
FREESCALE QUICC ENGINE UCC UART DRIVER
M: Timur Tabi <timur@tabi.org>
L: linuxppc-dev@lists.ozlabs.org
F: Documentation/devicetree/bindings/i2c/
F: Documentation/i2c/
F: drivers/i2c/
+F: drivers/i2c/*/
F: include/linux/i2c.h
F: include/linux/i2c-*.h
F: include/uapi/linux/i2c.h
S: Supported
F: drivers/platform/x86/intel_menlow.c
-INTEL IA32 MICROCODE UPDATE SUPPORT
-M: Borislav Petkov <bp@alien8.de>
-S: Maintained
-F: arch/x86/kernel/cpu/microcode/core*
-F: arch/x86/kernel/cpu/microcode/intel*
-
INTEL I/OAT DMA DRIVER
M: Dave Jiang <dave.jiang@intel.com>
R: Dan Williams <dan.j.williams@intel.com>
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Johannes Berg <johannes.berg@intel.com>
M: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-M: Intel Linux Wireless <ilw@linux.intel.com>
+M: Intel Linux Wireless <linuxwifi@intel.com>
L: linux-wireless@vger.kernel.org
W: http://intellinuxwireless.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
M: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
-W: http://kvm.qumranet.com
+W: http://www.linux-kvm.org/
S: Maintained
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
-W: http://kvm.qumranet.com
+W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
S: Supported
F: arch/powerpc/include/asm/kvm*
F: drivers/auxdisplay/ks0108.c
F: include/linux/ks0108.h
+L3MDEV
+M: David Ahern <dsa@cumulusnetworks.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/l3mdev
+F: include/net/l3mdev.h
+
LAPB module
L: linux-x25@vger.kernel.org
S: Orphan
F: include/linux/pmem.h
F: arch/*/include/asm/pmem.h
+LIGHTNVM PLATFORM SUPPORT
+M: Matias Bjorling <mb@lightnvm.io>
+W: http://github/OpenChannelSSD
+S: Maintained
+F: drivers/lightnvm/
+F: include/linux/lightnvm.h
+F: include/uapi/linux/lightnvm.h
+
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.ibm.com/linux/ltc/projects/ppc
S: Maintained
F: drivers/net/dsa/mv88e6352.c
+MARVELL CRYPTO DRIVER
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+M: Arnaud Ebalard <arno@natisbad.org>
+F: drivers/crypto/marvell/
+S: Maintained
+L: linux-crypto@vger.kernel.org
+
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
M: Stephen Hemminger <stephen@networkplumber.org>
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Amir Vadai <amirv@mellanox.com>
-M: Ido Shamay <idos@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
L: linux-wpan@vger.kernel.org
S: Maintained
F: drivers/net/ieee802154/mrf24j40.c
+F: Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
MSI LAPTOP SUPPORT
M: "Lee, Chun-Yi" <jlee@suse.com>
F: include/media/mt9v032.h
MULTIFUNCTION DEVICES (MFD)
-M: Samuel Ortiz <sameo@linux.intel.com>
M: Lee Jones <lee.jones@linaro.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
S: Supported
F: drivers/net/
F: include/linux/if_*
F: include/linux/netdevice.h
-F: include/linux/arcdevice.h
F: include/linux/etherdevice.h
F: include/linux/fcdevice.h
F: include/linux/fddidevice.h
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
F: include/linux/power/bq2415x_charger.h
-F: include/linux/power/bq27x00_battery.h
+F: include/linux/power/bq27xxx_battery.h
F: include/linux/power/isp1704_charger.h
F: drivers/power/bq2415x_charger.c
-F: drivers/power/bq27x00_battery.c
+F: drivers/power/bq27xxx_battery.c
F: drivers/power/isp1704_charger.c
F: drivers/power/rx51_battery.c
F: drivers/video/fbdev/nvidia/
NVM EXPRESS DRIVER
-M: Matthew Wilcox <willy@linux.intel.com>
+M: Keith Busch <keith.busch@intel.com>
+M: Jens Axboe <axboe@fb.com>
L: linux-nvme@lists.infradead.org
-T: git git://git.infradead.org/users/willy/linux-nvme.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
+W: https://kernel.googlesource.com/pub/scm/linux/kernel/git/axboe/linux-block/
S: Supported
-F: drivers/block/nvme*
+F: drivers/nvme/host/
F: include/linux/nvme.h
NVMEM FRAMEWORK
F: arch/x86/pci/
F: arch/x86/kernel/quirks.c
+PCI DRIVER FOR ALTERA PCIE IP
+M: Ley Foon Tan <lftan@altera.com>
+L: rfi@lists.rocketboards.org (moderated for non-subscribers)
+L: linux-pci@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/altera-pcie.txt
+F: drivers/pci/host/pcie-altera.c
+
PCI DRIVER FOR ARM VERSATILE PLATFORM
M: Rob Herring <robh@kernel.org>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
+PCI MSI DRIVER FOR ALTERA MSI IP
+M: Ley Foon Tan <lftan@altera.com>
+L: rfi@lists.rocketboards.org (moderated for non-subscribers)
+L: linux-pci@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
+F: drivers/pci/host/pcie-altera-msi.c
+
PCI MSI DRIVER FOR APPLIEDMICRO XGENE
M: Duc Dang <dhdang@apm.com>
L: linux-pci@vger.kernel.org
F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
F: drivers/pci/host/pci-xgene-msi.c
+PCIE DRIVER FOR HISILICON
+M: Zhou Wang <wangzhou1@hisilicon.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+F: drivers/pci/host/pcie-hisi.c
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
S: Maintained
F: drivers/pinctrl/pinctrl-at91.*
+PIN CONTROLLER - ATMEL AT91 PIO4
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-gpio@vger.kernel.org
+S: Supported
+F: drivers/pinctrl/pinctrl-at91-pio4.*
+
PIN CONTROLLER - INTEL
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
S: Maintained
F: drivers/pnp/
-PNXxxxx I2C DRIVER
-M: Vitaly Wool <vitalywool@gmail.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: drivers/i2c/busses/i2c-pnx.c
-
PPP PROTOCOL DRIVERS AND COMPRESSORS
M: Paul Mackerras <paulus@samba.org>
L: linux-ppp@vger.kernel.org
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Dept-GELinuxNICDev@qlogic.com
L: netdev@vger.kernel.org
S: Supported
S: Supported
F: drivers/net/ethernet/qlogic/qlge/
+QLOGIC QL4xxx ETHERNET DRIVER
+M: Yuval Mintz <Yuval.Mintz@qlogic.com>
+M: Ariel Elior <Ariel.Elior@qlogic.com>
+M: everest-linux-l2@qlogic.com
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/qlogic/qed/
+F: include/linux/qed/
+F: drivers/net/ethernet/qlogic/qede/
+
QNX4 FILESYSTEM
M: Anders Larsen <al@alarsen.net>
W: http://www.alarsen.net/linux/qnx4fs/
F: drivers/net/wireless/rtlwifi/
F: drivers/net/wireless/rtlwifi/rtl8192ce/
+RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
+M: Jes Sorensen <Jes.Sorensen@redhat.com>
+L: linux-wireless@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git rtl8723au-mac80211
+S: Maintained
+F: drivers/net/wireless/realtek/rtl8xxxu/
+
S3 SAVAGE FRAMEBUFFER DRIVER
M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev@vger.kernel.org
F: include/net/iucv/
F: net/iucv/
+S390 IOMMU (PCI)
+M: Gerald Schaefer <gerald.schaefer@de.ibm.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+F: drivers/iommu/s390-iommu.c
+
S3C24XX SD/MMC Driver
M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
+SYNOPSYS DESIGNWARE I2C DRIVER
+M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-designware-*
+F: include/linux/platform_data/i2c-designware.h
+
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
M: Seungwon Jeon <tgih.jun@samsung.com>
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Supported
F: arch/score/
+SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
+M: Sudeep Holla <sudeep.holla@arm.com>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/arm/arm,scpi.txt
+F: drivers/clk/clk-scpi.c
+F: drivers/cpufreq/scpi-cpufreq.c
+F: drivers/firmware/arm_scpi.c
+F: include/linux/scpi_protocol.h
+
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
STAGING - LUSTRE PARALLEL FILESYSTEM
M: Oleg Drokin <oleg.drokin@intel.com>
M: Andreas Dilger <andreas.dilger@intel.com>
-L: HPDD-discuss@lists.01.org (moderated for non-subscribers)
-W: http://lustre.opensfs.org/
+L: lustre-devel@lists.lustre.org (moderated for non-subscribers)
+W: http://wiki.lustre.org/
S: Maintained
F: drivers/staging/lustre
STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
-M: Julian Andres Klode <jak@jak-linux.org>
M: Marc Dietrich <marvin24@gmx.de>
L: ac100@lists.launchpad.net (moderated for non-subscribers)
L: linux-tegra@vger.kernel.org
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
+L: linux-snps-arc@lists.infraded.org
S: Supported
F: arch/arc/
F: Documentation/devicetree/bindings/arc/*
F: include/linux/cpu_cooling.h
F: Documentation/devicetree/bindings/thermal/
+THERMAL/CPU_COOLING
+M: Amit Daniel Kachhap <amit.kachhap@gmail.com>
+M: Viresh Kumar <viresh.kumar@linaro.org>
+M: Javi Merino <javi.merino@arm.com>
+L: linux-pm@vger.kernel.org
+S: Supported
+F: Documentation/thermal/cpu-cooling-api.txt
+F: drivers/thermal/cpu_cooling.c
+F: include/linux/cpu_cooling.h
+
THINGM BLINK(1) USB RGB LED DRIVER
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
S: Maintained
TPM DEVICE DRIVER
M: Peter Huewe <peterhuewe@gmx.de>
M: Marcel Selhorst <tpmdd@selhorst.net>
+M: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
R: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
W: http://tpmdd.sourceforge.net
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
F: Documentation/fb/uvesafb.txt
F: drivers/video/fbdev/uvesafb.*
+VF610 NAND DRIVER
+M: Stefan Agner <stefan@agner.ch>
+L: linux-mtd@lists.infradead.org
+S: Supported
+F: drivers/mtd/nand/vf610_nfc.c
+
VFAT/FAT/MSDOS FILESYSTEM
M: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
S: Maintained
F: drivers/media/v4l2-core/videobuf2-*
F: include/media/videobuf2-*
+VIRTUAL SERIO DEVICE DRIVER
+M: Stephen Chandler Paul <thatslyude@gmail.com>
+S: Maintained
+F: drivers/input/serio/userio.c
+F: include/uapi/linux/userio.h
+
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
F: include/linux/vlynq.h
VME SUBSYSTEM
-M: Martyn Welch <martyn.welch@ge.com>
+M: Martyn Welch <martyn@welchs.me.uk>
M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
M: Liam Girdwood <lgirdwood@gmail.com>
M: Mark Brown <broonie@kernel.org>
L: linux-kernel@vger.kernel.org
-W: http://opensource.wolfsonmicro.com/node/15
W: http://www.slimlogic.co.uk/?p=48
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
S: Supported
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/vrf.c
-F: include/net/vrf.h
+F: Documentation/networking/vrf.txt
VT1211 HARDWARE MONITOR DRIVER
M: Juerg Haefliger <juergh@gmail.com>
S: Maintained
F: drivers/net/wireless/wl3501*
-WM97XX TOUCHSCREEN DRIVERS
-M: Mark Brown <broonie@kernel.org>
-M: Liam Girdwood <lrg@slimlogic.co.uk>
-L: linux-input@vger.kernel.org
-T: git git://opensource.wolfsonmicro.com/linux-2.6-touch
-W: http://opensource.wolfsonmicro.com/node/7
-S: Supported
-F: drivers/input/touchscreen/*wm97*
-F: include/linux/wm97xx.h
-
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
-T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
-T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
-W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
+T: git https://github.com/CirrusLogic/linux-drivers.git
+W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: Documentation/hwmon/wm83??
+F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+F: Documentation/devicetree/bindings/mfd/arizona.txt
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
S: Maintained
F: arch/x86/kernel/cpu/mcheck/*
+X86 MICROCODE UPDATE SUPPORT
+M: Borislav Petkov <bp@alien8.de>
+S: Maintained
+F: arch/x86/kernel/cpu/microcode/*
+
X86 VDSO
M: Andy Lutomirski <luto@amacapital.net>
L: linux-kernel@vger.kernel.org
ZSMALLOC COMPRESSED SLAB MEMORY ALLOCATOR
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/zsmalloc.c
# One for each output format
# these work fairly well
- my %highlights_html = ( $type_constant, "<i>\$1</i>",
- $type_func, "<b>\$1</b>",
- $type_struct_xml, "<i>\$1</i>",
- $type_env, "<b><i>\$1</i></b>",
- $type_param, "<tt><b>\$1</b></tt>" );
+ my @highlights_html = (
+ [$type_constant, "<i>\$1</i>"],
+ [$type_func, "<b>\$1</b>"],
+ [$type_struct_xml, "<i>\$1</i>"],
+ [$type_env, "<b><i>\$1</i></b>"],
+ [$type_param, "<tt><b>\$1</b></tt>"]
+ );
my $local_lt = "\\\\\\\\lt:";
my $local_gt = "\\\\\\\\gt:";
my $blankline_html = $local_lt . "p" . $local_gt; # was "<p>"
# html version 5
- my %highlights_html5 = ( $type_constant, "<span class=\"const\">\$1</span>",
- $type_func, "<span class=\"func\">\$1</span>",
- $type_struct_xml, "<span class=\"struct\">\$1</span>",
- $type_env, "<span class=\"env\">\$1</span>",
- $type_param, "<span class=\"param\">\$1</span>" );
+ my @highlights_html5 = (
+ [$type_constant, "<span class=\"const\">\$1</span>"],
+ [$type_func, "<span class=\"func\">\$1</span>"],
+ [$type_struct_xml, "<span class=\"struct\">\$1</span>"],
+ [$type_env, "<span class=\"env\">\$1</span>"],
+ [$type_param, "<span class=\"param\">\$1</span>]"]
+ );
my $blankline_html5 = $local_lt . "br /" . $local_gt;
# XML, docbook format
- my %highlights_xml = ( "([^=])\\\"([^\\\"<]+)\\\"", "\$1<quote>\$2</quote>",
- $type_constant, "<constant>\$1</constant>",
- $type_func, "<function>\$1</function>",
- $type_struct_xml, "<structname>\$1</structname>",
- $type_env, "<envar>\$1</envar>",
- $type_param, "<parameter>\$1</parameter>" );
+ my @highlights_xml = (
+ ["([^=])\\\"([^\\\"<]+)\\\"", "\$1<quote>\$2</quote>"],
+ [$type_constant, "<constant>\$1</constant>"],
+ [$type_struct_xml, "<structname>\$1</structname>"],
+ [$type_param, "<parameter>\$1</parameter>"],
+ [$type_func, "<function>\$1</function>"],
+ [$type_env, "<envar>\$1</envar>"]
+ );
my $blankline_xml = $local_lt . "/para" . $local_gt . $local_lt . "para" . $local_gt . "\n";
# gnome, docbook format
- my %highlights_gnome = ( $type_constant, "<replaceable class=\"option\">\$1</replaceable>",
- $type_func, "<function>\$1</function>",
- $type_struct, "<structname>\$1</structname>",
- $type_env, "<envar>\$1</envar>",
- $type_param, "<parameter>\$1</parameter>" );
+ my @highlights_gnome = (
+ [$type_constant, "<replaceable class=\"option\">\$1</replaceable>"],
+ [$type_func, "<function>\$1</function>"],
+ [$type_struct, "<structname>\$1</structname>"],
+ [$type_env, "<envar>\$1</envar>"],
+ [$type_param, "<parameter>\$1</parameter>" ]
+ );
my $blankline_gnome = "</para><para>\n";
# these are pretty rough
- my %highlights_man = ( $type_constant, "\$1",
- $type_func, "\\\\fB\$1\\\\fP",
- $type_struct, "\\\\fI\$1\\\\fP",
- $type_param, "\\\\fI\$1\\\\fP" );
+ my @highlights_man = (
+ [$type_constant, "\$1"],
+ [$type_func, "\\\\fB\$1\\\\fP"],
+ [$type_struct, "\\\\fI\$1\\\\fP"],
+ [$type_param, "\\\\fI\$1\\\\fP"]
+ );
my $blankline_man = "";
# text-mode
- my %highlights_text = ( $type_constant, "\$1",
- $type_func, "\$1",
- $type_struct, "\$1",
- $type_param, "\$1" );
+ my @highlights_text = (
+ [$type_constant, "\$1"],
+ [$type_func, "\$1"],
+ [$type_struct, "\$1"],
+ [$type_param, "\$1"]
+ );
my $blankline_text = "";
# list mode
- my %highlights_list = ( $type_constant, "\$1",
- $type_func, "\$1",
- $type_struct, "\$1",
- $type_param, "\$1" );
+ my @highlights_list = (
+ [$type_constant, "\$1"],
+ [$type_func, "\$1"],
+ [$type_struct, "\$1"],
+ [$type_param, "\$1"]
+ );
my $blankline_list = "";
# read arguments
my $output_mode = "man";
my $output_preformatted = 0;
my $no_doc_sections = 0;
- my %highlights = %highlights_man;
+ my @highlights = @highlights_man;
my $blankline = $blankline_man;
my $modulename = "Kernel API";
my $function_only = 0;
my $cmd = shift @ARGV;
if ($cmd eq "-html") {
$output_mode = "html";
- %highlights = %highlights_html;
+ @highlights = @highlights_html;
$blankline = $blankline_html;
} elsif ($cmd eq "-html5") {
$output_mode = "html5";
- %highlights = %highlights_html5;
+ @highlights = @highlights_html5;
$blankline = $blankline_html5;
} elsif ($cmd eq "-man") {
$output_mode = "man";
- %highlights = %highlights_man;
+ @highlights = @highlights_man;
$blankline = $blankline_man;
} elsif ($cmd eq "-text") {
$output_mode = "text";
- %highlights = %highlights_text;
+ @highlights = @highlights_text;
$blankline = $blankline_text;
} elsif ($cmd eq "-docbook") {
$output_mode = "xml";
- %highlights = %highlights_xml;
+ @highlights = @highlights_xml;
$blankline = $blankline_xml;
} elsif ($cmd eq "-list") {
$output_mode = "list";
- %highlights = %highlights_list;
+ @highlights = @highlights_list;
$blankline = $blankline_list;
} elsif ($cmd eq "-gnome") {
$output_mode = "gnome";
- %highlights = %highlights_gnome;
+ @highlights = @highlights_gnome;
$blankline = $blankline_gnome;
} elsif ($cmd eq "-module") { # not needed for XML, inherits from calling document
$modulename = shift @ARGV;
my $func = "output_${functype}_$output_mode";
if (($function_only==0) ||
( $function_only == 1 && defined($function_table{$name})) ||
- ( $function_only == 2 && !defined($function_table{$name})))
+ ( $function_only == 2 && !($functype eq "function" && defined($function_table{$name}))))
{
&$func(@_);
$section_counter++;
$nested = $1;
# ignore members marked private:
- $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos;
- $members =~ s/\/\*\s*private:.*//gos;
+ $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gosi;
+ $members =~ s/\/\*\s*private:.*//gosi;
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
my $file = shift;
$x =~ s@/\*.*?\*/@@gos; # strip comments.
+
+ # Parse function prototypes
+ if ($x =~ /typedef\s+(\w+)\s*\(\*\s*(\w\S+)\s*\)\s*\((.*)\);/) {
+ # Function typedefs
+ $return_type = $1;
+ $declaration_name = $2;
+ my $args = $3;
+
+ create_parameterlist($args, ',', $file);
+
+ output_declaration($declaration_name,
+ 'function',
+ {'function' => $declaration_name,
+ 'module' => $modulename,
+ 'functiontype' => $return_type,
+ 'parameterlist' => \@parameterlist,
+ 'parameterdescs' => \%parameterdescs,
+ 'parametertypes' => \%parametertypes,
+ 'sectionlist' => \@sectionlist,
+ 'sections' => \%sections,
+ 'purpose' => $declaration_purpose
+ });
+ return;
+ }
+
while (($x =~ /\(*.\)\s*;$/) || ($x =~ /\[*.\]\s*;$/)) {
$x =~ s/\(*.\)\s*;$/;/;
$x =~ s/\[*.\]\s*;$/;/;
my $descr;
my $in_purpose = 0;
my $initial_section_counter = $section_counter;
+ my ($orig_file) = @_;
if (defined($ENV{'SRCTREE'})) {
- $file = "$ENV{'SRCTREE'}" . "/" . "@_";
+ $file = "$ENV{'SRCTREE'}" . "/" . $orig_file;
}
else {
- $file = "@_";
+ $file = $orig_file;
}
if (defined($source_map{$file})) {
$file = $source_map{$file};
print "<refentry>\n";
print " <refnamediv>\n";
print " <refname>\n";
- print " ${file}\n";
+ print " ${orig_file}\n";
print " </refname>\n";
print " <refpurpose>\n";
print " Document generation inconsistency\n";
print " <para>\n";
print " The template for this document tried to insert\n";
print " the structured comment from the file\n";
- print " <filename>${file}</filename> at this point,\n";
+ print " <filename>${orig_file}</filename> at this point,\n";
print " but none was found.\n";
print " This dummy section is inserted to allow\n";
print " generation to continue.\n";
# generate a sequence of code that will splice in highlighting information
# using the s// operator.
- foreach my $pattern (sort keys %highlights) {
- # print STDERR "scanning pattern:$pattern, highlight:($highlights{$pattern})\n";
- $dohighlight .= "\$contents =~ s:$pattern:$highlights{$pattern}:gs;\n";
+ foreach my $k (keys @highlights) {
+ my $pattern = $highlights[$k][0];
+ my $result = $highlights[$k][1];
+ # print STDERR "scanning pattern:$pattern, highlight:($result)\n";
+ $dohighlight .= "\$contents =~ s:$pattern:$result:gs;\n";
}
# Read the file that maps relative names to absolute names for
projects / karo-tx-linux.git / commitdiff