return 0;
}
- extern const unsigned char machine_real_restart_asm[];
- extern const u64 machine_real_restart_gdt[3];
-
+void machine_real_restart(unsigned int type)
+{
- void *restart_va;
- unsigned long restart_pa;
- void (*restart_lowmem)(unsigned int);
- u64 *lowmem_gdt;
++ void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int))
++ real_mode_header->machine_real_restart_asm;
+
+ local_irq_disable();
+
+ /*
+ * Write zero to CMOS register number 0x0f, which the BIOS POST
+ * routine will recognize as telling it to do a proper reboot. (Well
+ * that's what this book in front of me says -- it may only apply to
+ * the Phoenix BIOS though, it's not clear). At the same time,
+ * disable NMIs by setting the top bit in the CMOS address register,
+ * as we're about to do peculiar things to the CPU. I'm not sure if
+ * `outb_p' is needed instead of just `outb'. Use it to be on the
+ * safe side. (Yes, CMOS_WRITE does outb_p's. - Paul G.)
+ */
+ spin_lock(&rtc_lock);
+ CMOS_WRITE(0x00, 0x8f);
+ spin_unlock(&rtc_lock);
+
+ /*
+ * Switch back to the initial page table.
+ */
+ load_cr3(initial_page_table);
+
+ /*
+ * Write 0x1234 to absolute memory location 0x472. The BIOS reads
+ * this on booting to tell it to "Bypass memory test (also warm
+ * boot)". This seems like a fairly standard thing that gets set by
+ * REBOOT.COM programs, and the previous reset routine did this
+ * too. */
+ *((unsigned short *)0x472) = reboot_mode;
+
- /* Patch the GDT in the low memory trampoline */
- lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt);
-
- restart_va = TRAMPOLINE_SYM(machine_real_restart_asm);
- restart_pa = virt_to_phys(restart_va);
- restart_lowmem = (void (*)(unsigned int))restart_pa;
-
- /* GDT[0]: GDT self-pointer */
- lowmem_gdt[0] =
- (u64)(sizeof(machine_real_restart_gdt) - 1) +
- ((u64)virt_to_phys(lowmem_gdt) << 16);
- /* GDT[1]: 64K real mode code segment */
- lowmem_gdt[1] =
- GDT_ENTRY(0x009b, restart_pa, 0xffff);
-
+ /* Jump to the identity-mapped low memory code */
+ restart_lowmem(type);
+}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(machine_real_restart);
+#endif
+
+#endif /* CONFIG_X86_32 */
+
+/*
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+ if (reboot_type != BOOT_CF9) {
+ reboot_type = BOOT_CF9;
+ printk(KERN_INFO "%s series board detected. "
+ "Selecting PCI-method for reboots.\n", d->ident);
+ }
+ return 0;
+}
+
static int __init set_kbd_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_KBD) {
* Returns zero if CPU booted OK, else error code from
* ->wakeup_secondary_cpu.
*/
-static int __cpuinit do_boot_cpu(int apicid, int cpu)
+static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
{
+ volatile u32 *trampoline_status =
+ (volatile u32 *) __va(real_mode_header->trampoline_status);
+ /* start_ip had better be page-aligned! */
+ unsigned long start_ip = real_mode_header->trampoline_start;
+
unsigned long boot_error = 0;
- unsigned long start_ip;
int timeout;
- struct create_idle c_idle = {
- .cpu = cpu,
- .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
- };
-
- INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle);
alternatives_smp_switch(1);
#endif
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
initial_code = (unsigned long)start_secondary;
- stack_start = c_idle.idle->thread.sp;
+ stack_start = idle->thread.sp;
- /* start_ip had better be page-aligned! */
- start_ip = trampoline_address();
-
/* So we see what's up */
announce_cpu(cpu, apicid);
projects / karo-tx-linux.git / commitdiff