L: dri-devel@lists.freedesktop.org
L: linux-tegra@vger.kernel.org
T: git git://anongit.freedesktop.org/tegra/linux.git
- S: Maintained
+ S: Supported
+F: drivers/gpu/drm/tegra/
F: drivers/gpu/host1x/
+F: include/linux/host1x.h
F: include/uapi/drm/tegra_drm.h
F: Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
- ti,has-mailbox;
+ ctrl-module = <&omap_control_usbotg>;
};
+
+ aes: aes@4b501000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes";
+ reg = <0x4b501000 0xa0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 111>, <&sdma 110>;
+ dma-names = "tx", "rx";
+ };
+
+ des: des@480a5000 {
+ compatible = "ti,omap4-des";
+ ti,hwmods = "des";
+ reg = <0x480a5000 0xa0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 117>, <&sdma 116>;
+ dma-names = "tx", "rx";
+ };
};
};
hw-caps-temp-alert;
};
- omap_control_usb: omap-control-usb@4a002300 {
- compatible = "ti,omap-control-usb";
- reg = <0x4a002300 0x4>,
- <0x4a002370 0x4>;
- reg-names = "control_dev_conf", "phy_power_usb";
- ti,type = <2>;
+ omap_control_usb2phy: control-phy@4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb3phy: control-phy@4a002370 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002370 0x4>;
+ reg-names = "power";
};
- omap_dwc3@4a020000 {
+ usb3: omap_dwc3@4a020000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss";
reg = <0x4a020000 0x10000>;
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
- #include <linux/clocksource.h>
- #include <linux/clk-provider.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/chained_irq.h>
+#include <linux/platform_device.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
select ARM_AMBA
select ARM_ERRATA_764369
select ARM_ERRATA_775420
- select ARM_ERRATA_798181
+ select ARM_ERRATA_798181 if SMP
select ARM_GIC
+ select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
- select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
config ARCH_TEGRA_114_SOC
bool "Enable support for Tegra114 family"
- select HAVE_ARM_ARCH_TIMER
- select ARM_ERRATA_798181
+ select ARM_ERRATA_798181 if SMP
select ARM_L1_CACHE_SHIFT_6
+ select HAVE_ARM_ARCH_TIMER
select PINCTRL_TEGRA114
help
Support for NVIDIA Tegra T114 processor family, based on the
if ARCH_U8500
- config UX500_SOC_COMMON
- bool
- default y
- select ABX500_CORE
- select AB8500_CORE
- select ARM_ERRATA_754322
- select ARM_ERRATA_764369 if SMP
- select ARM_GIC
- select CACHE_L2X0
- select CLKSRC_NOMADIK_MTU
- select COMMON_CLK
- select PINCTRL
- select PINCTRL_NOMADIK
- select PINCTRL_ABX500
- select PL310_ERRATA_753970 if CACHE_PL310
-
config UX500_SOC_DB8500
bool
- select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
select PINCTRL_DB8540
# ARM CPU Idle drivers
#
+config ARM_BIG_LITTLE_CPUIDLE
+ bool "Support for ARM big.LITTLE processors"
+ depends on ARCH_VEXPRESS_TC2_PM
+ select ARM_CPU_SUSPEND
+ select CPU_IDLE_MULTIPLE_DRIVERS
+ help
+ Select this option to enable CPU idle driver for big.LITTLE based
+ ARM systems. Driver manages CPUs coordination through MCPM and
+ define different C-states for little and big cores through the
+ multiple CPU idle drivers infrastructure.
+
config ARM_HIGHBANK_CPUIDLE
bool "CPU Idle Driver for Calxeda processors"
- depends on ARCH_HIGHBANK
+ depends on ARM_PSCI
select ARM_CPU_SUSPEND
help
Select this to enable cpuidle on Calxeda processors.