avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
+ boundary Boundary Devices Inc.
brcm Broadcom Corporation
buffalo Buffalo, Inc.
calxeda Calxeda
excito Excito
fcs Fairchild Semiconductor
firefly Firefly
+focaltech FocalTech Systems Co.,Ltd
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
plathome Plat'Home Co., Ltd.
+ plda PLDA
pixcir PIXCIR MICROELECTRONICS Co., Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
+ tronfy Tronfy
truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
S: Maintained
F: drivers/hwmon/abituguru3.c
+ACCES 104-IDIO-16 GPIO DRIVER
+M: "William Breathitt Gray" <vilhelm.gray@gmail.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-104-idio-16.c
+
ACENIC DRIVER
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
-AMD MICROCODE UPDATE SUPPORT
-M: Borislav Petkov <bp@alien8.de>
-S: Maintained
-F: arch/x86/kernel/cpu/microcode/amd*
-
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
F: drivers/net/appletalk/
F: net/appletalk/
+ APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
+ M: Duc Dang <dhdang@apm.com>
+ S: Supported
+ F: arch/arm64/boot/dts/apm/
+
APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
M: Iyappan Subramanian <isubramanian@apm.com>
M: Keyur Chudgar <kchudgar@apm.com>
S: Maintained
F: arch/arm/mach-alpine/
- ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
+ ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
M: Joachim Eastwood <manabian@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ F: arch/arm/boot/dts/lpc43*
+ F: drivers/clk/nxp/clk-lpc18xx*
+ F: drivers/clocksource/time-lpc32xx.c
+ F: drivers/i2c/busses/i2c-lpc2k.c
+ F: drivers/memory/pl172.c
+ F: drivers/mtd/spi-nor/nxp-spifi.c
+ F: drivers/rtc/rtc-lpc24xx.c
N: lpc18xx
ARM/MAGICIAN MACHINE SUPPORT
F: drivers/*/*/*s3c2410*
F: drivers/spi/spi-s3c*
F: sound/soc/samsung/*
+ F: Documentation/arm/Samsung/
+ F: Documentation/devicetree/bindings/arm/samsung/
+ F: Documentation/devicetree/bindings/sram/samsung-sram.txt
+ F: Documentation/devicetree/bindings/power/pd-samsung.txt
N: exynos
ARM/SAMSUNG MOBILE MACHINE SUPPORT
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
- F: arch/arm/configs/bockw_defconfig
- F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/
S: Maintained
F: arch/arm/mach-sti/
F: arch/arm/boot/dts/sti*
+F: drivers/char/hw_random/st-rng.c
F: drivers/clocksource/arm_global_timer.c
F: drivers/clocksource/clksrc_st_lpc.c
F: drivers/i2c/busses/i2c-st.c
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/uniphier*
+ F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
+ F: arch/arm/mm/cache-uniphier.c
F: drivers/pinctrl/uniphier/
F: drivers/tty/serial/8250/8250_uniphier.c
N: uniphier
F: Documentation/aoe/
F: drivers/block/aoe/
+ATHEROS 71XX/9XXX GPIO DRIVER
+M: Alban Bedel <albeu@free.fr>
+W: https://github.com/AlbanBedel/linux
+T: git git://github.com/AlbanBedel/linux
+S: Maintained
+F: drivers/gpio/gpio-ath79.c
+F: Documentation/devicetree/bindings/gpio/gpio-ath79.txt
+
ATHEROS ATH GENERIC UTILITIES
M: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/scsi/bnx2i/
- BROADCOM CYGNUS/IPROC ARM ARCHITECTURE
+ BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
+ M: Jon Mason <jonmason@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/cygnus-linux.git
S: Maintained
N: iproc
N: cygnus
+ N: nsp
N: bcm9113*
N: bcm9583*
- N: bcm583*
+ N: bcm9585*
+ N: bcm9586*
+ N: bcm988312
N: bcm113*
+ N: bcm583*
+ N: bcm585*
+ N: bcm586*
+ N: bcm88312
BROADCOM BRCMSTB GPIO DRIVER
M: Gregory Fong <gregory.0xf0@gmail.com>
W: http://www.dialog-semiconductor.com/products
S: Supported
F: Documentation/hwmon/da90??
+F: Documentation/devicetree/bindings/sound/da[79]*.txt
F: drivers/gpio/gpio-da90??.c
F: drivers/hwmon/da90??-hwmon.c
F: drivers/iio/adc/da91??-*.c
F: include/drm/i915*
F: include/uapi/drm/i915*
+DRM DRIVERS FOR ATMEL HLCDC
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+L: dri-devel@lists.freedesktop.org
+S: Supported
+F: drivers/gpu/drm/atmel-hlcdc/
+F: Documentation/devicetree/bindings/drm/atmel/
+
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
M: Joonyoung Shim <jy0922.shim@samsung.com>
F: drivers/gpu/drm/imx/
F: Documentation/devicetree/bindings/drm/imx/
+DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
+M: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
+L: dri-devel@lists.freedesktop.org
+T: git git://github.com/patjak/drm-gma500
+S: Maintained
+F: drivers/gpu/drm/gma500
+F: include/drm/gma500*
+
DRM DRIVERS FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
M: Terje Bergström <tbergstrom@nvidia.com>
S: Maintained
F: drivers/net/ethernet/freescale/ucc_geth*
+FREESCALE eTSEC ETHERNET DRIVER (GIANFAR)
+M: Claudiu Manoil <claudiu.manoil@freescale.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/freescale/gianfar*
+X: drivers/net/ethernet/freescale/gianfar_ptp.c
+F: Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+
FREESCALE QUICC ENGINE UCC UART DRIVER
M: Timur Tabi <timur@tabi.org>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
F: drivers/platform/x86/intel_menlow.c
-INTEL IA32 MICROCODE UPDATE SUPPORT
-M: Borislav Petkov <bp@alien8.de>
-S: Maintained
-F: arch/x86/kernel/cpu/microcode/core*
-F: arch/x86/kernel/cpu/microcode/intel*
-
INTEL I/OAT DMA DRIVER
M: Dave Jiang <dave.jiang@intel.com>
R: Dan Williams <dan.j.williams@intel.com>
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Johannes Berg <johannes.berg@intel.com>
M: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-M: Intel Linux Wireless <ilw@linux.intel.com>
+M: Intel Linux Wireless <linuxwifi@intel.com>
L: linux-wireless@vger.kernel.org
W: http://intellinuxwireless.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
F: drivers/auxdisplay/ks0108.c
F: include/linux/ks0108.h
+L3MDEV
+M: David Ahern <dsa@cumulusnetworks.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/l3mdev
+F: include/net/l3mdev.h
+
LAPB module
L: linux-x25@vger.kernel.org
S: Orphan
S: Maintained
F: drivers/net/dsa/mv88e6352.c
+MARVELL CRYPTO DRIVER
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+M: Arnaud Ebalard <arno@natisbad.org>
+F: drivers/crypto/marvell/
+S: Maintained
+L: linux-crypto@vger.kernel.org
+
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
M: Stephen Hemminger <stephen@networkplumber.org>
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Amir Vadai <amirv@mellanox.com>
-M: Ido Shamay <idos@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
L: linux-wpan@vger.kernel.org
S: Maintained
F: drivers/net/ieee802154/mrf24j40.c
+F: Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
MSI LAPTOP SUPPORT
M: "Lee, Chun-Yi" <jlee@suse.com>
F: drivers/net/
F: include/linux/if_*
F: include/linux/netdevice.h
-F: include/linux/arcdevice.h
F: include/linux/etherdevice.h
F: include/linux/fcdevice.h
F: include/linux/fddidevice.h
S: Maintained
F: drivers/pinctrl/pinctrl-at91.*
+PIN CONTROLLER - ATMEL AT91 PIO4
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-gpio@vger.kernel.org
+S: Supported
+F: drivers/pinctrl/pinctrl-at91-pio4.*
+
PIN CONTROLLER - INTEL
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
S: Supported
F: drivers/net/ethernet/qlogic/qlge/
+QLOGIC QL4xxx ETHERNET DRIVER
+M: Yuval Mintz <Yuval.Mintz@qlogic.com>
+M: Ariel Elior <Ariel.Elior@qlogic.com>
+M: everest-linux-l2@qlogic.com
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/qlogic/qed/
+F: include/linux/qed/
+F: drivers/net/ethernet/qlogic/qede/
+
QNX4 FILESYSTEM
M: Anders Larsen <al@alarsen.net>
W: http://www.alarsen.net/linux/qnx4fs/
F: drivers/net/wireless/rtlwifi/
F: drivers/net/wireless/rtlwifi/rtl8192ce/
+RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
+M: Jes Sorensen <Jes.Sorensen@redhat.com>
+L: linux-wireless@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git rtl8723au-mac80211
+S: Maintained
+F: drivers/net/wireless/realtek/rtl8xxxu/
+
S3 SAVAGE FRAMEBUFFER DRIVER
M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev@vger.kernel.org
F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
+SYNOPSYS DESIGNWARE I2C DRIVER
+M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-designware-*
+F: include/linux/platform_data/i2c-designware.h
+
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
M: Seungwon Jeon <tgih.jun@samsung.com>
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Supported
F: arch/score/
+ SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
+ M: Sudeep Holla <sudeep.holla@arm.com>
+ L: linux-arm-kernel@lists.infradead.org
+ S: Maintained
+ F: Documentation/devicetree/bindings/arm/arm,scpi.txt
+ F: drivers/clk/clk-scpi.c
+ F: drivers/cpufreq/scpi-cpufreq.c
+ F: drivers/firmware/arm_scpi.c
+ F: include/linux/scpi_protocol.h
+
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
+L: linux-snps-arc@lists.infraded.org
S: Supported
F: arch/arc/
F: Documentation/devicetree/bindings/arc/*
F: drivers/media/v4l2-core/videobuf2-*
F: include/media/videobuf2-*
+VIRTUAL SERIO DEVICE DRIVER
+M: Stephen Chandler Paul <thatslyude@gmail.com>
+S: Maintained
+F: drivers/input/serio/userio.c
+F: include/uapi/linux/userio.h
+
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/vrf.c
-F: include/net/vrf.h
F: Documentation/networking/vrf.txt
VT1211 HARDWARE MONITOR DRIVER
S: Maintained
F: arch/x86/kernel/cpu/mcheck/*
+X86 MICROCODE UPDATE SUPPORT
+M: Borislav Petkov <bp@alien8.de>
+S: Maintained
+F: arch/x86/kernel/cpu/microcode/*
+
X86 VDSO
M: Andy Lutomirski <luto@amacapital.net>
L: linux-kernel@vger.kernel.org
ZSMALLOC COMPRESSED SLAB MEMORY ALLOCATOR
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/zsmalloc.c
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
- config ARCH_SHMOBILE_LEGACY
- bool "Renesas ARM SoCs (non-multiplatform)"
- select ARCH_SHMOBILE
- select ARM_PATCH_PHYS_VIRT if MMU
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select MULTI_IRQ_HANDLER
- select NO_IOPORT_MAP
- select PINCTRL
- select PM_GENERIC_DOMAINS if PM
- select SH_CLK_CPG
- select SPARSE_IRQ
- help
- Support for Renesas ARM SoC platforms using a non-multiplatform
- kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
- and RZ families.
-
config ARCH_RPC
bool "RiscPC"
+ depends on MMU
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
+ select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
config HAVE_ARM_TWD
bool
- depends on SMP
select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
config VMSPLIT_3G
bool "3G/1G user/kernel split"
+ config VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel split (for full 1G low memory)"
config VMSPLIT_2G
bool "2G/2G user/kernel split"
config VMSPLIT_1G
default PHYS_OFFSET if !MMU
default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G
+ default 0xB0000000 if VMSPLIT_3G_OPT
default 0xC0000000
config NR_CPUS
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default 128 if SOC_AT91RM9200
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
If unsure, say n.
config HIGHPTE
- bool "Allocate 2nd-level pagetables from highmem"
+ bool "Allocate 2nd-level pagetables from highmem" if EXPERT
depends on HIGHMEM
+ default y
help
The VM uses one page of physical memory for each page table.
For systems with a lot of processes, this can use a lot of
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
- range 11 64 if ARCH_SHMOBILE_LEGACY
+ int "Maximum zone order"
default "12" if SOC_AM33XX
default "9" if SA1111 || ARCH_EFM32
default "11"
reg = <0x38>;
interrupt-parent = <&gpio0>;
- interrupts = <31 0>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
vmmc-supply = <&dcdc4>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&usb2_phy1 {
#thermal-sensor-cells = <1>;
};
+ dsp1_system: dsp_system@40d00000 {
+ compatible = "syscon";
+ reg = <0x40d00000 0x100>;
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
status = "disabled";
};
+ mmu0_dsp1: mmu@40d01000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x40d01000 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu0_dsp1";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ status = "disabled";
+ };
+
+ mmu1_dsp1: mmu@40d02000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x40d02000 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu1_dsp1";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ status = "disabled";
+ };
+
+ mmu_ipu1: mmu@58882000 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x58882000 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu_ipu1";
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ status = "disabled";
+ };
+
+ mmu_ipu2: mmu@55082000 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x55082000 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu_ipu2";
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ status = "disabled";
+ };
+
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
status = "disabled";
};
+ mcasp3: mcasp@48468000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp3";
+ reg = <0x48468000 0x2000>;
+ reg-names = "mpu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp3_ahclkx_mux>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
ranges;
+ syscon = <&scm_conf>;
status = "disabled";
davinci_mdio: mdio@48485000 {
broken-cd;
bus-width = <8>;
cap-mmc-highspeed;
+ rockchip,default-sample-phase = <158>;
disable-wp;
+ mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
num-slots = <1>;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc33_sys>;
vqmmc-supply = <&vcc18_wl>;
};
};
};
- /*
- * On Marvell-based hardware this is a no-connect. Make sure we enable
- * the pullup so that the line doesn't float. The pullup shouldn't
- * hurt on Broadcom-based hardware since the other side is actively
- * driving this signal. As proof: we've already got a pullup on RX.
- */
- uart0 {
- uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
- };
- };
-
write-protect {
fw_wp_ap: fw-wp-ap {
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
+ #include <dt-bindings/power/rk3288-power.h>
#include "skeleton.dtsi"
/ {
sdmmc: dwmmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 150000000>;
- clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
- clock-names = "biu", "ciu";
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0c0000 0x4000>;
sdio0: dwmmc@ff0d0000 {
compatible = "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 150000000>;
- clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>;
- clock-names = "biu", "ciu";
+ clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+ <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0d0000 0x4000>;
sdio1: dwmmc@ff0e0000 {
compatible = "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 150000000>;
- clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>;
- clock-names = "biu", "ciu";
+ clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
+ <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0e0000 0x4000>;
emmc: dwmmc@ff0f0000 {
compatible = "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 150000000>;
- clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
- clock-names = "biu", "ciu";
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0f0000 0x4000>;
};
pmu: power-management@ff730000 {
- compatible = "rockchip,rk3288-pmu", "syscon";
+ compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
reg = <0xff730000 0x100>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Note: Although SCLK_* are the working clocks
+ * of device without including on the NOC, needed for
+ * synchronous reset.
+ *
+ * The clocks on the which NOC:
+ * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+ * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+ * ACLK_RGA is on ACLK_RGA_NIU.
+ * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+ *
+ * Which clock are device clocks:
+ * clocks devices
+ * *_IEP IEP:Image Enhancement Processor
+ * *_ISP ISP:Image Signal Processing
+ * *_VIP VIP:Video Input Processor
+ * *_VOP* VOP:Visual Output Processor
+ * *_RGA RGA
+ * *_EDP* EDP
+ * *_LVDS_* LVDS
+ * *_HDMI HDMI
+ * *_MIPI_* MIPI
+ */
+ pd_vio {
+ reg = <RK3288_PD_VIO>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru ACLK_ISP>,
+ <&cru ACLK_RGA>,
+ <&cru ACLK_VIP>,
+ <&cru ACLK_VOP0>,
+ <&cru ACLK_VOP1>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru HCLK_IEP>,
+ <&cru HCLK_ISP>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VIP>,
+ <&cru HCLK_VOP0>,
+ <&cru HCLK_VOP1>,
+ <&cru PCLK_EDP_CTRL>,
+ <&cru PCLK_HDMI_CTRL>,
+ <&cru PCLK_LVDS_PHY>,
+ <&cru PCLK_MIPI_CSI>,
+ <&cru PCLK_MIPI_DSI0>,
+ <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_EDP_24M>,
+ <&cru SCLK_EDP>,
+ <&cru SCLK_ISP_JPE>,
+ <&cru SCLK_ISP>,
+ <&cru SCLK_RGA>;
+ };
+
+ /*
+ * Note: The following 3 are HEVC(H.265) clocks,
+ * and on the ACLK_HEVC_NIU (NOC).
+ */
+ pd_hevc {
+ reg = <RK3288_PD_HEVC>;
+ clocks = <&cru ACLK_HEVC>,
+ <&cru SCLK_HEVC_CABAC>,
+ <&cru SCLK_HEVC_CORE>;
+ };
+
+ /*
+ * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+ * (video endecoder & decoder) clocks that on the
+ * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+ */
+ pd_video {
+ reg = <RK3288_PD_VIDEO>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ };
+
+ /*
+ * Note: ACLK_GPU is the GPU clock,
+ * and on the ACLK_GPU_NIU (NOC).
+ */
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
};
sgrf: syscon@ff740000 {
status = "disabled";
};
+ spdif: sound@ff88b0000 {
+ compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
+ reg = <0xff8b0000 0x10000>;
+ #sound-dai-cells = <0>;
+ clock-names = "hclk", "mclk";
+ clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+ dmas = <&dmac_bus_s 3>;
+ dma-names = "tx";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
i2s: i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
reg = <0xff930300 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
+ power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
ports {
#interrupt-cells = <2>;
};
+ hdmi {
+ hdmi_ddc: hdmi-ddc {
+ rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
+ <7 20 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ rockchip,pins = <5 14 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
<4 3 3 &pcfg_pull_none>;
};
};
+
+ spdif {
+ spdif_tx: spdif-tx {
+ rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
};
};
cache-level = <2>;
};
+ sdmmc0: sdio-host@a0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xb0000000 0x300>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
};
pmc: pmc@f0014000 {
- compatible = "atmel,sama5d2-pmc";
+ compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
atmel,clk-output-range = <0 83000000>;
};
+ i2s0_clk: i2s0_clk {
+ #clock-cells = <0>;
+ reg = <54>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s1_clk: i2s1_clk {
+ #clock-cells = <0>;
+ reg = <55>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
classd_clk: classd_clk {
#clock-cells = <0>;
reg = <59>;
reg = <53>;
};
};
+
+ gck {
+ compatible = "atmel,sama5d2-clk-generated";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ sdmmc0_gclk: sdmmc0_gclk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ sdmmc1_gclk: sdmmc1_gclk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ tcb0_gclk: tcb0_gclk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb1_gclk: tcb1_gclk {
+ #clock-cells = <0>;
+ reg = <36>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_gclk: pwm_gclk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s0_gclk: i2s0_gclk {
+ #clock-cells = <0>;
+ reg = <54>;
+ };
+
+ i2s1_gclk: i2s1_gclk {
+ #clock-cells = <0>;
+ reg = <55>;
+ };
+ };
};
sha@f0028000 {
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};
aes@f002c000 {
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};
spi0: spi@f8000000 {
status = "disabled";
};
+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@f8038000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8038000 0x200>;
+ clocks = <&flx1_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8038000 0x800>;
+ status = "disabled";
+ };
+
+ rstc@f8048000 {
+ compatible = "atmel,sama5d3-rstc";
+ reg = <0xf8048000 0x10>;
+ clocks = <&clk32k>;
+ };
+
pit: timer@f8048030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
status = "disabled";
};
+ flx2: flexcom@fc010000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc010000 0x200>;
+ clocks = <&flx2_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc010000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@fc014000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc014000 0x200>;
+ clocks = <&flx3_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc014000 0x800>;
+ status = "disabled";
+ };
+
+ flx4: flexcom@fc018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc018000 0x200>;
+ clocks = <&flx4_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc018000 0x800>;
+ status = "disabled";
+ };
+
aic: interrupt-controller@fc020000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d2-aic";
status = "disabled";
};
+ tdes@fc044000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
++
+ pioA: pinctrl@fc038000 {
+ compatible = "atmel,sama5d2-pinctrl";
+ reg = <0xfc038000 0x600>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+ <68 IRQ_TYPE_LEVEL_HIGH 7>,
+ <69 IRQ_TYPE_LEVEL_HIGH 7>,
+ <70 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&pioA_clk>;
+ };
};
};
};
<ST_IRQ_SYSCFG_DISABLED>;
};
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
status = "disabled";
};
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
status = "disabled";
};
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3_default>;
status = "disabled";
};
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4_default>;
status = "disabled";
};
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi10_default>;
status = "disabled";
};
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi11_default>;
status = "disabled";
};
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi12_default>;
status = "disabled";
};
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
pinctrl-names = "default";
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
+
+ status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
+
+ status = "disabled";
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ ethernet0: dwmac@9630000 {
+ device_type = "network";
+ status = "disabled";
+ compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ reg = <0x9630000 0x8000>, <0x80 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ st,syscon = <&syscfg_sbc_reg 0x80>;
+ st,gmac_en;
+ resets = <&softreset STIH407_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+
+ interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupt-names = "macirq", "eth_wake_irq";
+
+ /* DMA Bus Mode */
+ snps,pbl = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>;
+
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_ETH_PHY>;
};
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
};
};
CONFIG_DM_CRYPT=m
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
+ CONFIG_USB_RTL8152=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
- CONFIG_MWIFIEX=y
- CONFIG_MWIFIEX_SDIO=y
+ CONFIG_MWIFIEX=m
+ CONFIG_MWIFIEX_SDIO=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
+ CONFIG_MEDIA_SUPPORT=m
+ CONFIG_MEDIA_CAMERA_SUPPORT=y
+ CONFIG_MEDIA_USB_SUPPORT=y
+ CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
- CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
+ CONFIG_USB_DWC2=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_GADGET=y
+ CONFIG_USB_ETH=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_EXYNOS=y
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
+ CONFIG_LEDS_GPIO=y
+ CONFIG_LEDS_PWM=y
+ CONFIG_LEDS_TRIGGERS=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_MAX77802=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
+ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
+ CONFIG_MTD_SPI_NOR=y
+ # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+ CONFIG_SPI_NXP_SPIFI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SRAM=y
CONFIG_EEPROM_AT24=y
+ CONFIG_SCSI=y
+ CONFIG_BLK_DEV_SD=y
+ # CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
+ CONFIG_I2C_LPC2K=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+ CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_74XX_MMIO=y
+ CONFIG_GPIO_PCF857X=y
+ CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LM75=y
CONFIG_WATCHDOG=y
- CONFIG_WATCHDOG_CORE=y
- CONFIG_MFD_SYSCON=y
+ CONFIG_LPC18XX_WATCHDOG=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+ CONFIG_USB_EHCI_HCD_PLATFORM=y
+ CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
+ CONFIG_RTC_DRV_LPC24XX=y
CONFIG_DMADEVICES=y
CONFIG_AMBA_PL08X=y
+ CONFIG_LPC18XX_DMAMUX=y
+ CONFIG_MEMORY=y
+ CONFIG_ARM_PL172_MPMC=y
+ CONFIG_PWM=y
+ CONFIG_PWM_LPC18XX_SCT=y
+ CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_EXT2_FS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
+ CONFIG_JFFS2_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
- # CONFIG_RCU_CPU_STALL_INFO is not set
- # CONFIG_FTRACE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRC_ITU_T=y
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/irq.h>
+ #include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/err.h>
#endif
};
-static int exynos_pmu_domain_xlate(struct irq_domain *domain,
- struct device_node *controller,
- const u32 *intspec,
- unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
+static int exynos_pmu_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
{
- if (domain->of_node != controller)
- return -EINVAL; /* Shouldn't happen, really... */
- if (intsize != 3)
- return -EINVAL; /* Not GIC compliant */
- if (intspec[0] != 0)
- return -EINVAL; /* No PPI should point to this domain */
+ if (is_of_node(fwspec->fwnode)) {
+ if (fwspec->param_count != 3)
+ return -EINVAL;
+
+ /* No PPI should point to this domain */
+ if (fwspec->param[0] != 0)
+ return -EINVAL;
+
+ *hwirq = fwspec->param[1];
+ *type = fwspec->param[2];
+ return 0;
+ }
- *out_hwirq = intspec[1];
- *out_type = intspec[2];
- return 0;
+ return -EINVAL;
}
static int exynos_pmu_domain_alloc(struct irq_domain *domain,
unsigned int virq,
unsigned int nr_irqs, void *data)
{
- struct of_phandle_args *args = data;
- struct of_phandle_args parent_args;
+ struct irq_fwspec *fwspec = data;
+ struct irq_fwspec parent_fwspec;
irq_hw_number_t hwirq;
int i;
- if (args->args_count != 3)
+ if (fwspec->param_count != 3)
return -EINVAL; /* Not GIC compliant */
- if (args->args[0] != 0)
+ if (fwspec->param[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
- hwirq = args->args[1];
+ hwirq = fwspec->param[1];
for (i = 0; i < nr_irqs; i++)
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
&exynos_pmu_chip, NULL);
- parent_args = *args;
- parent_args.np = domain->parent->of_node;
- return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
+ parent_fwspec = *fwspec;
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+ &parent_fwspec);
}
static const struct irq_domain_ops exynos_pmu_domain_ops = {
- .xlate = exynos_pmu_domain_xlate,
- .alloc = exynos_pmu_domain_alloc,
- .free = irq_domain_free_irqs_common,
+ .translate = exynos_pmu_domain_translate,
+ .alloc = exynos_pmu_domain_alloc,
+ .free = irq_domain_free_irqs_common,
};
static int __init exynos_pmu_irq_init(struct device_node *node,
return 0;
}
- #define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init)
+ #define EXYNOS_PMU_IRQ(symbol, name) IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init)
EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
+ #include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#endif
};
-static int imx_gpc_domain_xlate(struct irq_domain *domain,
- struct device_node *controller,
- const u32 *intspec,
- unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
+static int imx_gpc_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
{
- if (domain->of_node != controller)
- return -EINVAL; /* Shouldn't happen, really... */
- if (intsize != 3)
- return -EINVAL; /* Not GIC compliant */
- if (intspec[0] != 0)
- return -EINVAL; /* No PPI should point to this domain */
+ if (is_of_node(fwspec->fwnode)) {
+ if (fwspec->param_count != 3)
+ return -EINVAL;
- *out_hwirq = intspec[1];
- *out_type = intspec[2];
- return 0;
+ /* No PPI should point to this domain */
+ if (fwspec->param[0] != 0)
+ return -EINVAL;
+
+ *hwirq = fwspec->param[1];
+ *type = fwspec->param[2];
+ return 0;
+ }
+
+ return -EINVAL;
}
static int imx_gpc_domain_alloc(struct irq_domain *domain,
unsigned int irq,
unsigned int nr_irqs, void *data)
{
- struct of_phandle_args *args = data;
- struct of_phandle_args parent_args;
+ struct irq_fwspec *fwspec = data;
+ struct irq_fwspec parent_fwspec;
irq_hw_number_t hwirq;
int i;
- if (args->args_count != 3)
+ if (fwspec->param_count != 3)
return -EINVAL; /* Not GIC compliant */
- if (args->args[0] != 0)
+ if (fwspec->param[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
- hwirq = args->args[1];
+ hwirq = fwspec->param[1];
if (hwirq >= GPC_MAX_IRQS)
return -EINVAL; /* Can't deal with this */
irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
&imx_gpc_chip, NULL);
- parent_args = *args;
- parent_args.np = domain->parent->of_node;
- return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+ parent_fwspec = *fwspec;
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs,
+ &parent_fwspec);
}
static const struct irq_domain_ops imx_gpc_domain_ops = {
- .xlate = imx_gpc_domain_xlate,
- .alloc = imx_gpc_domain_alloc,
- .free = irq_domain_free_irqs_common,
+ .translate = imx_gpc_domain_translate,
+ .alloc = imx_gpc_domain_alloc,
+ .free = irq_domain_free_irqs_common,
};
static int __init imx_gpc_init(struct device_node *node,
return 0;
}
-
- /*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
- OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+ IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
void __init imx_gpc_check_dt(void)
{
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
+ #include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
return NOTIFY_OK;
}
- static struct notifier_block __refdata irq_hotplug_notifier = {
+ static struct notifier_block irq_hotplug_notifier = {
.notifier_call = irq_cpu_hotplug_notify,
};
#endif
};
-static int wakeupgen_domain_xlate(struct irq_domain *domain,
- struct device_node *controller,
- const u32 *intspec,
- unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
+static int wakeupgen_domain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
{
- if (domain->of_node != controller)
- return -EINVAL; /* Shouldn't happen, really... */
- if (intsize != 3)
- return -EINVAL; /* Not GIC compliant */
- if (intspec[0] != 0)
- return -EINVAL; /* No PPI should point to this domain */
+ if (is_of_node(fwspec->fwnode)) {
+ if (fwspec->param_count != 3)
+ return -EINVAL;
- *out_hwirq = intspec[1];
- *out_type = intspec[2];
- return 0;
+ /* No PPI should point to this domain */
+ if (fwspec->param[0] != 0)
+ return -EINVAL;
+
+ *hwirq = fwspec->param[1];
+ *type = fwspec->param[2];
+ return 0;
+ }
+
+ return -EINVAL;
}
static int wakeupgen_domain_alloc(struct irq_domain *domain,
unsigned int virq,
unsigned int nr_irqs, void *data)
{
- struct of_phandle_args *args = data;
- struct of_phandle_args parent_args;
+ struct irq_fwspec *fwspec = data;
+ struct irq_fwspec parent_fwspec;
irq_hw_number_t hwirq;
int i;
- if (args->args_count != 3)
+ if (fwspec->param_count != 3)
return -EINVAL; /* Not GIC compliant */
- if (args->args[0] != 0)
+ if (fwspec->param[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
- hwirq = args->args[1];
+ hwirq = fwspec->param[1];
if (hwirq >= MAX_IRQS)
return -EINVAL; /* Can't deal with this */
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
&wakeupgen_chip, NULL);
- parent_args = *args;
- parent_args.np = domain->parent->of_node;
- return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
+ parent_fwspec = *fwspec;
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+ &parent_fwspec);
}
static const struct irq_domain_ops wakeupgen_domain_ops = {
- .xlate = wakeupgen_domain_xlate,
- .alloc = wakeupgen_domain_alloc,
- .free = irq_domain_free_irqs_common,
+ .translate = wakeupgen_domain_translate,
+ .alloc = wakeupgen_domain_alloc,
+ .free = irq_domain_free_irqs_common,
};
/*
return 0;
}
-
- /*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
- OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
+ IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
config CPU_32v3
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4T
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v5
bool
select CPU_USE_DOMAINS if MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select NEED_KUSER_HELPERS
select TLS_REG_EMUL if SMP || !MMU
a few prototypes like that in existence) and therefore access to
that required register must be emulated.
-config NEEDS_SYSCALL_FOR_CMPXCHG
- bool
- select NEED_KUSER_HELPERS
- help
- SMP on a pre-ARMv6 processor? Well OK then.
- Forget about fast user space cmpxchg support.
- It is just not possible.
-
config NEED_KUSER_HELPERS
bool
This option enables the Tauros2 L2 cache controller (as
found on PJ1/PJ4).
+ config CACHE_UNIPHIER
+ bool "Enable the UniPhier outer cache controller"
+ depends on ARCH_UNIPHIER
+ default y
+ select OUTER_CACHE
+ select OUTER_CACHE_SYNC
+ help
+ This option enables the UniPhier outer cache (system cache)
+ controller.
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
clock-frequency = <50000000>;
};
+ pmu {
+ compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
clock-output-names = "xge0clk";
};
+ xge1clk: xge1clk@1f62c000 {
+ compatible = "apm,xgene-device-clock";
+ status = "disabled";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f62c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ csr-mask = <0x3>;
+ clock-output-names = "xge1clk";
+ };
+
sataphy1clk: sataphy1clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
0x0 0x1f 0x4>;
};
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
csw: csw@7e200000 {
compatible = "apm,xgene-csw", "syscon";
reg = <0x0 0x7e200000 0x0 0x1000>;
reg = <0x0 0x7c600000 0x0 0x200000>;
pmd-controller = <3>;
};
+
+ edacl3@7e600000 {
+ compatible = "apm,xgene-edac-l3";
+ reg = <0x0 0x7e600000 0x0 0x1000>;
+ };
+
+ edacsoc@7e930000 {
+ compatible = "apm,xgene-edac-soc-v1";
+ reg = <0x0 0x7e930000 0x0 0x1000>;
+ };
};
pcie0: pcie@1f2b0000 {
phy-connection-type = "xgmii";
};
+ xgenet1: ethernet@1f620000 {
+ compatible = "apm,xgene1-xgenet";
+ status = "disabled";
+ reg = <0x0 0x1f620000 0x0 0xd100>,
+ <0x0 0x1f600000 0x0 0Xc300>,
+ <0x0 0x18000000 0x0 0X8000>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x6C 0x4>,
+ <0x0 0x6D 0x4>;
+ port-id = <1>;
+ dma-coherent;
+ clocks = <&xge1clk 0>;
+ /* mac address will be overwritten by the bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ phy-connection-type = "xgmii";
+ };
+
rng: rng@10520000 {
compatible = "apm,xgene-rng";
reg = <0x0 0x10520000 0x0 0x100>;
bool
select CLKSRC_OF
+ config CLKSRC_TI_32K
+ bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select CLKSRC_OF if OF
+ help
+ This option enables support for Texas Instruments 32.768 Hz clocksource
+ available on many OMAP-like platforms.
+
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
depends on MIPS_GIC
select CLKSRC_OF
+config CLKSRC_TANGO_XTAL
+ bool
+ select CLKSRC_OF
+
config CLKSRC_PXA
def_bool y if ARCH_PXA || ARCH_SA1100
select CLKSRC_OF if OF
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
+ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
+obj-$(CONFIG_CLKSRC_TANGO_XTAL) += tango_xtal.o
obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o
obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
obj-$(CONFIG_H8300) += h8300_timer8.o
obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
+obj-$(CONFIG_X86_NUMACHIP) += numachip.o
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+ config SENSORS_ARM_SCPI
+ tristate "ARM SCPI Sensors"
+ depends on ARM_SCPI_PROTOCOL
+ help
+ This driver provides support for temperature, voltage, current
+ and power sensors available on ARM Ltd's SCP based platforms. The
+ actual number and type of sensors exported depend on the platform.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C
This driver can also be built as a module. If so, the module
will be called max6697.
+config SENSORS_MAX31790
+ tristate "Maxim MAX31790 sensor chip"
+ depends on I2C
+ help
+ If you say yes here you get support for 6-Channel PWM-Output
+ Fan RPM Controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called max31790.
+
config SENSORS_HTU21
tristate "Measurement Specialties HTU21D humidity/temperature sensors"
depends on I2C
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
+ obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_MAX6697) += max6697.o
+obj-$(CONFIG_SENSORS_MAX31790) += max31790.o
obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
- #include <linux/device.h>
- #include <linux/i2c.h>
- #include <linux/leds.h>
- #include <linux/spi/spi.h>
- #include <linux/usb/atmel_usba_udc.h>
- #include <linux/atmel-mci.h>
- #include <sound/atmel-ac97c.h>
#include <linux/serial.h>
- #include <linux/platform_data/macb.h>
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
struct serial_rs485 rs485; /* rs485 settings */
};
-/* CAN */
-struct at91_can_data {
- void (*transceiver_switch)(int on);
-};
-
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
projects / karo-tx-linux.git / commitdiff