From: Tony Lindgren <tony@atomide.com>
Date: Mon, 14 Oct 2013 18:31:43 +0000 (-0700)
Subject: ARM: OMAP2+: Remove legacy booting support for omap3 EVM
X-Git-Tag: next-20131021~21^2~1^2^2~2
X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-linux.git;a=commitdiff_plain;h=95807689eab8441737572d1a9daaa1025429a908

ARM: OMAP2+: Remove legacy booting support for omap3 EVM

We now have pretty decent support with the device tree
based booting. Patches to add more features are welcome.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6850bf9f8f18..fbd730d895cf 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -256,12 +256,6 @@ config MACH_OVERO
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3EVM
-	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1d2917b16a96..f8db40d1f1c2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -242,7 +242,6 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
deleted file mode 100644
index 18143873346c..000000000000
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/leds.h>
-#include <linux/interrupt.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/musb.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
-#include <linux/smsc911x.h>
-
-#include <linux/wl12xx.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include "common.h"
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-
-#define	NAND_CS			0
-
-#define OMAP3_EVM_TS_GPIO	175
-#define OMAP3_EVM_EHCI_VBUS	22
-#define OMAP3_EVM_EHCI_SELECT	61
-
-#define OMAP3EVM_ETHR_START	0x2c000000
-#define OMAP3EVM_ETHR_SIZE	1024
-#define OMAP3EVM_ETHR_ID_REV	0x50
-#define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMSC911X_CS	5
-/*
- * Eth Reset signal
- *	64 = Generation 1 (<=RevD)
- *	7 = Generation 2 (>=RevE)
- */
-#define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
-#define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *	GEN_1	= 0x01150000
- *	GEN_2	= 0x92200000
- */
-enum {
-	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
-	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
-};
-
-static u8 omap3_evm_version;
-
-static u8 get_omap3_evm_rev(void)
-{
-	return omap3_evm_version;
-}
-
-static void __init omap3_evm_get_revision(void)
-{
-	void __iomem *ioaddr;
-	unsigned int smsc_id;
-
-	/* Ethernet PHY ID is stored at ID_REV register */
-	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
-	if (!ioaddr)
-		return;
-	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
-	iounmap(ioaddr);
-
-	switch (smsc_id) {
-	/*SMSC9115 chipset*/
-	case 0x01150000:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
-		break;
-	/*SMSC 9220 chipset*/
-	case 0x92200000:
-	default:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-	}
-}
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = OMAP3EVM_SMSC911X_CS,
-	.gpio_irq       = OMAP3EVM_ETHR_GPIO_IRQ,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init omap3evm_init_smsc911x(void)
-{
-	/* Configure ethernet controller reset gpio */
-	if (cpu_is_omap3430()) {
-		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
-		else
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
-	}
-
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3evm_init_smsc911x(void) { return; }
-#endif
-
-/*
- * OMAP3EVM LCD Panel control signals
- */
-#define OMAP3EVM_LCD_PANEL_LR		2
-#define OMAP3EVM_LCD_PANEL_UD		3
-#define OMAP3EVM_LCD_PANEL_INI		152
-#define OMAP3EVM_LCD_PANEL_QVGA		154
-#define OMAP3EVM_LCD_PANEL_RESB		155
-
-#define OMAP3EVM_LCD_PANEL_ENVDD	153
-#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
-
-/*
- * OMAP3EVM DVI control signals
- */
-#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
-
-#ifdef CONFIG_BROKEN
-static void __init omap3_evm_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
-				"lcd_panel_envdd");
-	if (r)
-		pr_err("failed to get lcd_panel_envdd GPIO\n");
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
-				GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
-	if (r)
-		pr_err("failed to get lcd_panel_bklight GPIO\n");
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-}
-#endif
-
-static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.resb_gpio		= OMAP3EVM_LCD_PANEL_RESB,
-	.ini_gpio		= OMAP3EVM_LCD_PANEL_INI,
-	.mo_gpio		= OMAP3EVM_LCD_PANEL_QVGA,
-	.lr_gpio		= OMAP3EVM_LCD_PANEL_LR,
-	.ud_gpio		= OMAP3EVM_LCD_PANEL_UD,
-};
-
-static struct platform_device omap3_evm_lcd_device = {
-	.name                   = "panel-sharp-ls037v7dw01",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device omap3_evm_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = OMAP3EVM_DVI_PANEL_EN_GPIO,
-};
-
-static struct platform_device omap3_evm_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data omap3_evm_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device omap3_evm_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_evm_tv_pdata,
-};
-
-static struct omap_dss_board_info omap3_evm_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
-	.consumer_supplies	= omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
-	.consumer_supplies	= omap3evm_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 63,
-		.deferred	= true,
-	},
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	{
-		.name		= "wl1271",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-#endif
-	{}	/* Terminator */
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "omap3evm::ledb",
-		/* normally not visible (board underside) */
-		.default_trigger	= "default-on",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-
-static int omap3evm_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r, lcd_bl_en;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * Most GPIOs are for USB OTG.  Some are mostly sent to
-	 * the P2 connector; notably LEDA for the LCD backlight.
-	 */
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
-		GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
-	if (r)
-		printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
-
-	/* gpio + 7 == DVI Enable */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	platform_device_register(&leds_gpio);
-
-	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
-	 * for starting USB tranceiver
-	 */
-#ifdef CONFIG_TWL4030_CORE
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		u8 val;
-
-		twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
-		val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
-		twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
-	}
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.use_leds	= true,
-	.setup		= omap3evm_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_ENTER),
-	KEY(0, 3, KEY_M),
-
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_I),
-	KEY(1, 3, KEY_N),
-
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_E),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_O),
-
-	KEY(3, 0, KEY_B),
-	KEY(3, 1, KEY_F),
-	KEY(3, 2, KEY_K),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3evm_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VIO for ads7846 */
-static struct regulator_init_data omap3evm_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
-	.consumer_supplies	= omap3evm_vio_supply,
-};
-
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-
-#define OMAP3EVM_WLAN_PMENA_GPIO	(150)
-#define OMAP3EVM_WLAN_IRQ_GPIO		(149)
-
-static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* VMMC2 for driving the WL12xx module */
-static struct regulator_init_data omap3evm_vmmc2 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
-	.consumer_supplies	= omap3evm_vmmc2_supply,
-};
-
-static struct fixed_voltage_config omap3evm_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.80V */
-	.gpio			= OMAP3EVM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &omap3evm_vmmc2,
-};
-
-static struct platform_device omap3evm_wlan_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &omap3evm_vwlan,
-	},
-};
-
-struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-};
-#endif
-
-/* VAUX2 for USB */
-static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
-	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
-	REGULATOR_SUPPLY("vaux2", NULL),
-};
-
-static struct regulator_init_data omap3evm_vaux2 = {
-	.constraints = {
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3evm_vaux2_supplies),
-	.consumer_supplies		= omap3evm_vaux2_supplies,
-};
-
-static struct twl4030_platform_data omap3evm_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &omap3evm_kp_data,
-	.gpio		= &omap3evm_gpio_data,
-	.vio		= &omap3evm_vio,
-	.vmmc1		= &omap3evm_vmmc1,
-	.vsim		= &omap3evm_vsim,
-};
-
-static int __init omap3_evm_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3evm_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3evm_twldata.vdac->constraints.apply_uV = true;
-	omap3evm_twldata.vpll2->constraints.apply_uV = true;
-
-	omap3_pmic_init("twl4030", &omap3evm_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = -1,	/* set at runtime */
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux omap35x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_board_mux omap36x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap35x_board_mux	NULL
-#define omap36x_board_mux	NULL
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct gpio omap3_evm_ehci_gpios[] __initdata = {
-	{ OMAP3_EVM_EHCI_VBUS,	 GPIOF_OUT_INIT_HIGH,  "enable EHCI VBUS" },
-	{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW,   "select EHCI port" },
-};
-
-static void __init omap3_evm_wl12xx_init(void)
-{
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	int ret;
-
-	/* WL12xx WLAN Init */
-	omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap3evm_wlan_regulator);
-	if (ret)
-		pr_err("error registering wl12xx device: %d\n", ret);
-#endif
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct mtd_partition omap3evm_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 4*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 14*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot Env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2*(SZ_128K)
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 40*(SZ_128K)
-	},
-	{
-		.name           = "File system",
-		.size           = MTDPART_SIZ_FULL,
-		.offset         = MTDPART_OFS_APPEND,
-	},
-};
-
-static void __init omap3_evm_init(void)
-{
-	struct omap_board_mux *obm;
-
-	omap3_evm_get_revision();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
-	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
-
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		omap3evm_twldata.vaux2 = &omap3evm_vaux2;
-
-	omap3_evm_i2c_init();
-
-	omap_display_init(&omap3_evm_dss_data);
-	platform_device_register(&omap3_evm_lcd_device);
-	platform_device_register(&omap3_evm_tfp410_device);
-	platform_device_register(&omap3_evm_dvi_connector_device);
-	platform_device_register(&omap3_evm_tv_connector_device);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
-
-	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
-	usb_nop_xceiv_register();
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		/* enable EHCI VBUS using GPIO22 */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
-		/* Select EHCI port on main board */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
-				   OMAP_PIN_INPUT_PULLUP);
-		gpio_request_array(omap3_evm_ehci_gpios,
-				   ARRAY_SIZE(omap3_evm_ehci_gpios));
-
-		/* setup EHCI phy reset config */
-		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		phy_data[0].reset_gpio = 21;
-
-		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
-		musb_board_data.power = 500;
-		musb_board_data.extvbus = 1;
-	} else {
-		/* setup EHCI phy reset on MDC */
-		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		phy_data[0].reset_gpio = 135;
-	}
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	board_nand_init(omap3evm_nand_partitions,
-			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
-			NAND_BUSWIDTH_16, NULL);
-
-	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
-	omap3evm_init_smsc911x();
-#ifdef CONFIG_BROKEN
-	omap3_evm_display_init();
-#endif
-	omap3_evm_wl12xx_init();
-	omap_twl4030_audio_init("omap3evm", NULL);
-}
-
-MACHINE_START(OMAP3EVM, "OMAP3 EVM")
-	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_evm_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END