1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX27 current ;
34 package -hardware CYGPKG_HAL_ARM_TX27KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX27 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnu
79 # value_source default
80 # Default value: arm-926ejs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # value_source inferred
95 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX27
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX27 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX27 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX27 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
798 # Ethernet transceiver (PHY) support
799 # API for ethernet PHY devices
801 cdl_package CYGPKG_DEVS_ETH_PHY {
802 # Packages cannot be added or removed, nor can their version be changed,
803 # simply by editing their value. Instead the appropriate configuration
804 # should be used to perform these actions.
806 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
807 # CYGPKG_IO_ETH_DRIVERS == current
810 # This value cannot be modified here.
812 # Current value: 1 current
813 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
814 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
819 # Enable driver debugging
820 # Enables the diagnostic debug messages on the
823 cdl_option CYGDBG_DEVS_ETH_PHY {
825 # No user value, uncomment the following line to provide one.
827 # value_source default
831 # Time period (seconds) to wait for auto-negotiation
832 # The length of time to wait for auto-negotiation to complete
833 # before giving up and declaring the link dead/missing.
835 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
837 # No user value, uncomment the following line to provide one.
839 # value_source default
844 # Include support for National Semiconductor DP83847 DsPHYTER II
846 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
848 # No user value, uncomment the following line to provide one.
850 # value_source default
855 # Include support for AMD 79C874 NetPHY
857 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
859 # No user value, uncomment the following line to provide one.
861 # value_source default
866 # Include support for Intel LXT972xxx PHY
868 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
870 # No user value, uncomment the following line to provide one.
872 # value_source default
877 # Include support for ICS 1890 PHY
879 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
881 # No user value, uncomment the following line to provide one.
883 # value_source default
888 # Include support for ICS 1892 PHY
890 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
892 # No user value, uncomment the following line to provide one.
894 # value_source default
899 # Include support for ICS 1893 and 1893AF PHY
901 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
903 # No user value, uncomment the following line to provide one.
905 # value_source default
910 # Include support for the Davicom DM9161A PHY
912 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
914 # No user value, uncomment the following line to provide one.
916 # value_source default
921 # Include support for the Micrel KS8721 PHY
923 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
925 # No user value, uncomment the following line to provide one.
927 # value_source default
932 # Include support for SMSC LAN8700 NetPHY
934 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
936 # No user value, uncomment the following line to provide one.
938 # The inferred value should not be edited directly.
940 # value_source inferred
943 # The following properties are affected by this value
944 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
945 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
950 # ISO C library internationalization functions
952 # This package provides internationalization functions specified by the
953 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
954 # functionality and <ctype.h> functionality.
956 cdl_package CYGPKG_LIBC_I18N {
957 # Packages cannot be added or removed, nor can their version be changed,
958 # simply by editing their value. Instead the appropriate configuration
959 # should be used to perform these actions.
961 # This value cannot be modified here.
963 # Current value: 1 current
964 # Requires: CYGPKG_ISOINFRA
965 # CYGPKG_ISOINFRA == current
971 # These options determine which locales other than the "C" locale
972 # are supported and hence contribute to the size of the executable.
974 cdl_component CYGPKG_LIBC_I18N_LOCALES {
975 # There is no associated value.
979 # Support for multiple locales required
981 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
982 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
983 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
984 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
985 # This value cannot be modified here.
988 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
989 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
992 # The following properties are affected by this value
995 # C-SJIS locale support
996 # This option controls if the "C-SJIS" locale will be
997 # supported by setlocale(). The locale is a hybrid locale
998 # that is mostly the "C" locale with Japanese SJIS multibyte
1001 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1003 # No user value, uncomment the following line to provide one.
1005 # value_source default
1008 # The following properties are affected by this value
1009 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1010 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1011 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1012 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1015 # C-JIS locale support
1016 # This option controls if the "C-JIS" locale will be
1017 # supported by setlocale(). The locale is a hybrid locale
1018 # that is mostly the "C" locale with Japanese JIS multibyte
1021 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1023 # No user value, uncomment the following line to provide one.
1025 # value_source default
1028 # The following properties are affected by this value
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1031 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1032 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1035 # C-EUCJP locale support
1036 # This option controls if the "C-EUCJP" locale will be
1037 # supported by setlocale(). The locale is a hybrid locale
1038 # that is mostly the "C" locale with Japanese EUCJP multibyte
1041 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1043 # No user value, uncomment the following line to provide one.
1045 # value_source default
1048 # The following properties are affected by this value
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1051 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1052 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1056 # Newlib's ctype implementation
1057 # This option enables the implementation of the ctype functions
1058 # that comes with newlib. It is table driven and therefore
1059 # exhibits different performance characteristics. It also offers
1060 # a limited amount of binary compatibility
1061 # with newlib so that programs linked against newlib ctype/locale
1062 # do not need to be recompiled when linked with eCos.
1064 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1066 # No user value, uncomment the following line to provide one.
1068 # value_source default
1070 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1071 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1075 # Per-thread multibyte state
1076 # This option controls whether the multibyte character
1077 # handling functions mblen(), mbtowc(), and wctomb(),
1078 # have their state recorded on a per-thread
1079 # basis rather than global. If this option is
1080 # disabled, some per-thread space can be saved.
1081 # Enabling this option will use three slots
1082 # of kernel per-thread data. You should ensure you
1083 # have enough slots configured for all your
1086 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1087 # This option is not active
1088 # ActiveIf constraint: CYGPKG_KERNEL
1089 # CYGPKG_KERNEL (unknown) == 0
1093 # No user value, uncomment the following line to provide one.
1095 # value_source default
1096 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1097 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1099 # Requires: CYGVAR_KERNEL_THREADS_DATA
1100 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1104 # Size of locale name strings
1105 # This option controls the maximum size of
1106 # locale names and is used, among other things
1107 # to instantiate a static string used
1108 # as a return value from the
1109 # setlocale() function. When requesting the
1110 # current locale settings with LC_ALL, a string
1111 # must be constructed to contain this data, rather
1112 # than just returning a constant string. This
1113 # string data is stored in the static string.
1114 # This depends on the length of locale names,
1115 # hence this option. If just the C locale is
1116 # present, this option can be set as low as 2.
1118 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1120 # No user value, uncomment the following line to provide one.
1122 # value_source default
1123 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1124 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1125 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1126 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1128 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1129 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1130 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1131 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1134 # Inline versions of <ctype.h> functions
1135 # This option chooses whether the simple character
1136 # classification and conversion functions (e.g.
1137 # isupper(), isalpha(), toupper(), etc.)
1138 # from <ctype.h> are available as inline
1139 # functions. This may improve performance and as
1140 # the functions are small, may even improve code
1143 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1145 # No user value, uncomment the following line to provide one.
1147 # value_source default
1149 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1150 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1154 # C library i18n functions build options
1155 # Package specific build options including control over
1156 # compiler flags used only in building this package,
1157 # and details of which tests are built.
1159 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1160 # There is no associated value.
1164 # Additional compiler flags
1165 # This option modifies the set of compiler flags for
1166 # building the C library. These flags are used in addition
1167 # to the set of global flags.
1169 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1171 # No user value, uncomment the following line to provide one.
1172 # user_value "-fno-rtti -Woverloaded-virtual"
1173 # value_source default
1174 # Default value: "-fno-rtti -Woverloaded-virtual"
1177 # Suppressed compiler flags
1178 # This option modifies the set of compiler flags for
1179 # building the C library. These flags are removed from
1180 # the set of global flags if present.
1182 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1184 # No user value, uncomment the following line to provide one.
1185 # user_value -Wno-pointer-sign
1186 # value_source default
1187 # Default value: -Wno-pointer-sign
1190 # C library i18n function tests
1191 # This option specifies the set of tests for the C library
1194 cdl_option CYGPKG_LIBC_I18N_TESTS {
1195 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1197 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1202 # ISO C library general utility functions
1203 # doc: ref/libc.html
1204 # This package provides general utility functions in <stdlib.h>
1205 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1207 cdl_package CYGPKG_LIBC_STDLIB {
1208 # Packages cannot be added or removed, nor can their version be changed,
1209 # simply by editing their value. Instead the appropriate configuration
1210 # should be used to perform these actions.
1212 # This value cannot be modified here.
1214 # Current value: 1 current
1215 # Requires: CYGPKG_ISOINFRA
1216 # CYGPKG_ISOINFRA == current
1218 # Requires: CYGINT_ISO_CTYPE
1219 # CYGINT_ISO_CTYPE == 1
1221 # Requires: CYGINT_ISO_STRING_STRFUNCS
1222 # CYGINT_ISO_STRING_STRFUNCS == 1
1227 # Inline versions of <stdlib.h> functions
1228 # This option chooses whether some of the
1229 # particularly simple standard utility functions
1230 # from <stdlib.h> are available as inline
1231 # functions. This may improve performance, and as
1232 # the functions are small, may even improve code
1235 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1236 # There is no associated value.
1242 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1244 # No user value, uncomment the following line to provide one.
1246 # value_source default
1248 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1249 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1255 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1257 # No user value, uncomment the following line to provide one.
1259 # value_source default
1261 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1262 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1266 # atof() / atoi() / atol()
1268 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1270 # No user value, uncomment the following line to provide one.
1272 # value_source default
1274 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1275 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1280 # Random number generation
1281 # These options control the behaviour of the
1282 # functions rand(), srand() and rand_r()
1284 cdl_component CYGPKG_LIBC_RAND {
1285 # There is no associated value.
1289 # Per-thread random seed
1290 # doc: ref/libc-thread-safety.html
1291 # This option controls whether the pseudo-random
1292 # number generation functions rand() and srand()
1293 # have their state recorded on a per-thread
1294 # basis rather than global. If this option is
1295 # disabled, some per-thread space can be saved.
1296 # Note there is also a POSIX-standard rand_r()
1297 # function to achieve a similar effect with user
1298 # support. Enabling this option will use one slot
1299 # of kernel per-thread data. You should ensure you
1300 # have enough slots configured for all your
1303 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1305 # No user value, uncomment the following line to provide one.
1307 # value_source default
1309 # Requires: CYGVAR_KERNEL_THREADS_DATA
1310 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1314 # Random number seed
1315 # This selects the initial random number seed for
1316 # rand()'s pseudo-random number generator. For
1317 # strict ISO standard compliance, this should be 1,
1318 # as per section 7.10.2.2 of the standard.
1320 cdl_option CYGNUM_LIBC_RAND_SEED {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Legal values: 0 to 0x7fffffff
1330 # Trace verbosity level for debugging the rand(),
1331 # srand() and rand_r() functions. Increase this
1332 # value to get additional trace output.
1334 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1336 # No user value, uncomment the following line to provide one.
1338 # value_source default
1340 # Legal values: 0 to 1
1343 # Simplest implementation
1344 # This provides a very simple implementation of rand()
1345 # that does not perform well with randomness in the
1346 # lower significant bits. However it is exceptionally
1347 # fast. It uses the sample algorithm from the ISO C
1350 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1352 # No user value, uncomment the following line to provide one.
1354 # value_source default
1358 # Simple implementation #1
1359 # This provides a very simple implementation of rand()
1360 # based on the simplest implementation above. However
1361 # it does try to work around the lack of randomness
1362 # in the lower significant bits, at the expense of a
1365 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1372 # Knuth implementation #1
1373 # This implements a slightly more complex algorithm
1374 # published in Donald E. Knuth's Art of Computer
1375 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1376 # This produces better random numbers than the
1377 # simplest approach but is slower.
1379 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1388 # This option allows use of the utility function
1389 # strtod() (and consequently atof()) to convert
1390 # from string to double precision floating point
1391 # numbers. Disabling this option removes the
1392 # dependency on the math library package.
1394 cdl_option CYGFUN_LIBC_strtod {
1396 # No user value, uncomment the following line to provide one.
1398 # value_source default
1399 # Default value: 0 != CYGPKG_LIBM
1400 # CYGPKG_LIBM (unknown) == 0
1402 # Requires: CYGPKG_LIBM
1403 # CYGPKG_LIBM (unknown) == 0
1407 # Provides long long conversion functions
1408 # Enabling this option will provide support for the strtoll(),
1409 # strtoull() and atoll() conversion functions, which are
1410 # the long long variants of the standard versions of these
1411 # functions. Supporting this requires extra code and compile
1414 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1421 # bsearch() tracing level
1422 # Trace verbosity level for debugging the <stdlib.h>
1423 # binary search function bsearch(). Increase this
1424 # value to get additional trace output.
1426 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1428 # No user value, uncomment the following line to provide one.
1430 # value_source default
1432 # Legal values: 0 to 1
1435 # qsort() tracing level
1436 # Trace verbosity level for debugging the <stdlib.h>
1437 # quicksort function qsort(). Increase this value
1438 # to get additional trace output.
1440 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1442 # No user value, uncomment the following line to provide one.
1444 # value_source default
1446 # Legal values: 0 to 1
1449 # C library stdlib build options
1450 # Package specific build options including control over
1451 # compiler flags used only in building this package,
1452 # and details of which tests are built.
1454 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1455 # There is no associated value.
1459 # Additional compiler flags
1460 # This option modifies the set of compiler flags for
1461 # building this package. These flags are used in addition
1462 # to the set of global flags.
1464 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1466 # No user value, uncomment the following line to provide one.
1467 # user_value "-fno-rtti -Woverloaded-virtual"
1468 # value_source default
1469 # Default value: "-fno-rtti -Woverloaded-virtual"
1472 # Suppressed compiler flags
1473 # This option modifies the set of compiler flags for
1474 # building this package. These flags are removed from
1475 # the set of global flags if present.
1477 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1479 # No user value, uncomment the following line to provide one.
1480 # user_value -Wno-pointer-sign
1481 # value_source default
1482 # Default value: -Wno-pointer-sign
1485 # C library stdlib tests
1486 # This option specifies the set of tests for this package.
1488 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1489 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1491 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1498 # doc: ref/the-ecos-hardware-abstraction-layer.html
1499 # The eCos HAL package provide a porting layer for
1500 # higher-level parts of the system such as the kernel and the
1501 # C library. Each installation should have HAL packages for
1502 # one or more architectures, and for each architecture there
1503 # may be one or more supported platforms. It is necessary to
1504 # select one target architecture and one platform for that
1505 # architecture. There are also a number of configuration
1506 # options that are common to all HAL packages.
1508 cdl_package CYGPKG_HAL {
1509 # Packages cannot be added or removed, nor can their version be changed,
1510 # simply by editing their value. Instead the appropriate configuration
1511 # should be used to perform these actions.
1513 # This value cannot be modified here.
1515 # Current value: 1 current
1516 # Requires: CYGPKG_INFRA
1517 # CYGPKG_INFRA == current
1520 # The following properties are affected by this value
1524 # Platform-independent HAL options
1525 # A number of configuration options are common to most or all
1526 # HAL packages, for example options controlling how much state
1527 # should be saved during a context switch. The implementations
1528 # of these options will vary from architecture to architecture.
1530 cdl_component CYGPKG_HAL_COMMON {
1531 # There is no associated value.
1535 # Provide eCos kernel support
1536 # The HAL can be configured to either support the full eCos
1537 # kernel, or to support only very simple applications which do
1538 # not require a full kernel. If kernel support is not required
1539 # then some of the startup, exception, and interrupt handling
1540 # code can be eliminated.
1542 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1544 # No user value, uncomment the following line to provide one.
1546 # value_source default
1547 # Default value: CYGPKG_KERNEL
1548 # CYGPKG_KERNEL (unknown) == 0
1550 # Requires: CYGPKG_KERNEL
1551 # CYGPKG_KERNEL (unknown) == 0
1555 # HAL exception support
1556 # When a processor exception occurs, for example an attempt to
1557 # execute an illegal instruction or to perform a divide by
1558 # zero, this exception may be handled in a number of different
1559 # ways. If the target system has gdb support then typically
1560 # the exception will be handled by gdb code. Otherwise if the
1561 # HAL exception support is enabled then the HAL will invoke a
1562 # routine deliver_exception(). Typically this routine will be
1563 # provided by the eCos kernel, but it is possible for
1564 # application code to provide its own implementation. If the
1565 # HAL exception support is not enabled and a processor
1566 # exception occurs then the behaviour of the system is
1569 cdl_option CYGPKG_HAL_EXCEPTIONS {
1571 # No user value, uncomment the following line to provide one.
1573 # value_source default
1574 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1575 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1577 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1578 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1582 # Stop calling constructors early
1583 # This option supports environments where some constructors
1584 # must be run in the context of a thread rather than at
1585 # simple system startup time. A boolean flag named
1586 # cyg_hal_stop_constructors is set to 1 when constructors
1587 # should no longer be invoked. It is up to some other
1588 # package to deal with the rest of the constructors.
1589 # In the current version this is only possible with the
1592 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1594 # No user value, uncomment the following line to provide one.
1596 # value_source default
1598 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1599 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1603 # HAL uses the MMU and allows for CDL manipulation of it's use
1605 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1606 # No options implement this inferface
1607 # This value cannot be modified here.
1611 # The following properties are affected by this value
1612 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1613 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1616 # Install MMU tables.
1617 # This option controls whether this application installs
1618 # its own Memory Management Unit (MMU) tables, or relies on the
1619 # existing environment to run.
1621 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1622 # This option is not active
1623 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1624 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1628 # No user value, uncomment the following line to provide one.
1630 # value_source default
1631 # Default value: CYG_HAL_STARTUP != "RAM"
1632 # CYG_HAL_STARTUP == ROMRAM
1635 # The following properties are affected by this value
1636 # option CYGSEM_HAL_STATIC_MMU_TABLES
1637 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1640 # Use static MMU tables.
1641 # This option defines an environment where any Memory
1642 # Management Unit (MMU) tables are constant. Normally used by ROM
1643 # based environments, this provides a way to save RAM usage which
1644 # would otherwise be required for these tables.
1646 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1648 # No user value, uncomment the following line to provide one.
1650 # value_source default
1652 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1653 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1657 # Route diagnostic output to debug channel
1658 # If not inheriting the console setup from the ROM monitor,
1659 # it is possible to redirect diagnostic output to the debug
1660 # channel by enabling this option. Depending on the debugger
1661 # used it may also be necessary to select a mangler for the
1662 # output to be displayed by the debugger.
1664 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1665 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1666 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1668 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1669 # CYGPKG_HAL_ARM == current
1670 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1671 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1672 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1676 # No user value, uncomment the following line to provide one.
1678 # value_source default
1679 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1680 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1681 # CYG_HAL_STARTUP == ROMRAM
1684 # The following properties are affected by this value
1685 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1686 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1690 # Mangler used on diag output
1691 # It is sometimes necessary to mangle (encode) the
1692 # diag ASCII text output in order for it to show up at the
1693 # other end. In particular, GDB may silently ignore raw
1696 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1697 # This option is not active
1698 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1701 # No user value, uncomment the following line to provide one.
1703 # value_source default
1704 # Default value: GDB
1705 # Legal values: "GDB" "None"
1710 # HAL interrupt handling
1711 # A number of configuration options related to interrupt
1712 # handling are common to most or all HAL packages, even though
1713 # the implementations will vary from architecture to
1716 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1717 # There is no associated value.
1721 # Use separate stack for interrupts
1722 # When an interrupt occurs this interrupt can be handled either
1723 # on the current stack or on a separate stack maintained by the
1724 # HAL. Using a separate stack requires a small number of extra
1725 # instructions in the interrupt handling code, but it has the
1726 # advantage that it is no longer necessary to allow extra space
1727 # in every thread stack for the interrupt handlers. The amount
1728 # of extra space required depends on the interrupt handlers
1729 # that are being used.
1731 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1733 # No user value, uncomment the following line to provide one.
1735 # The inferred value should not be edited directly.
1737 # value_source inferred
1740 # The following properties are affected by this value
1741 # package CYGPKG_REDBOOT
1742 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1745 # Interrupt stack size
1746 # This configuration option specifies the stack size in bytes
1747 # for the interrupt stack. Typically this should be a multiple
1748 # of 16, but the exact requirements will vary from architecture
1749 # to architecture. The interrupt stack serves two separate
1750 # purposes. It is used as the stack during system
1751 # initialization. In addition, if the interrupt system is
1752 # configured to use a separate stack then all interrupts will
1753 # be processed on this stack. The exact memory requirements
1754 # will vary from application to application, and will depend
1755 # heavily on whether or not other interrupt-related options,
1756 # for example nested interrupts, are enabled. On most targets,
1757 # in a configuration with no kernel this stack will also be
1758 # the stack used to invoke the application, and must obviously
1759 # be appropriately large in that case.
1761 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1763 # No user value, uncomment the following line to provide one.
1765 # value_source default
1766 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1767 # CYGPKG_KERNEL (unknown) == 0
1769 # Legal values: 128 to 1048576
1772 # Allow nested interrupts
1773 # When an interrupt occurs the HAL interrupt handling code can
1774 # either leave interrupts disabled for the duration of the
1775 # interrupt handling code, or by doing some extra work it can
1776 # reenable interrupts before invoking the interrupt handler and
1777 # thus allow nested interrupts to happen. If all the interrupt
1778 # handlers being used are small and do not involve any loops
1779 # then it is usually better to disallow nested interrupts.
1780 # However if any of the interrupt handlers are more complicated
1781 # than nested interrupts will usually be required.
1783 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1785 # No user value, uncomment the following line to provide one.
1787 # value_source default
1791 # Save minimum context on interrupt
1792 # The HAL interrupt handling code can exploit the calling conventions
1793 # defined for a given architecture to reduce the amount of state
1794 # that has to be saved. Generally this improves performance and
1795 # reduces code size. However it can make source-level debugging
1798 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1800 # No user value, uncomment the following line to provide one.
1802 # The inferred value should not be edited directly.
1804 # value_source inferred
1807 # The following properties are affected by this value
1808 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1809 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1810 # component CYGBLD_BUILD_REDBOOT
1811 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1814 # Chain all interrupts together
1815 # Interrupts can be attached to vectors either singly, or be
1816 # chained together. The latter is necessary if there is no way
1817 # of discovering which device has interrupted without
1818 # inspecting the device itself. It can also reduce the amount
1819 # of RAM needed for interrupt decoding tables and code.
1821 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1823 # No user value, uncomment the following line to provide one.
1825 # value_source default
1829 # Ignore spurious [fleeting] interrupts
1830 # On some hardware, interrupt sources may not be de-bounced or
1831 # de-glitched. Rather than try to handle these interrupts (no
1832 # handling may be possible), this option allows the HAL to simply
1833 # ignore them. In most cases, if the interrupt is real it will
1834 # reoccur in a detectable form.
1836 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1838 # No user value, uncomment the following line to provide one.
1840 # value_source default
1845 # HAL context switch support
1846 # A number of configuration options related to thread contexts
1847 # are common to most or all HAL packages, even though the
1848 # implementations will vary from architecture to architecture.
1850 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1851 # There is no associated value.
1853 # The following properties are affected by this value
1857 # Use minimum thread context
1858 # The thread context switch code can exploit the calling
1859 # conventions defined for a given architecture to reduce the
1860 # amount of state that has to be saved during a context
1861 # switch. Generally this improves performance and reduces
1862 # code size. However it can make source-level debugging more
1865 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1867 # No user value, uncomment the following line to provide one.
1869 # The inferred value should not be edited directly.
1871 # value_source inferred
1874 # The following properties are affected by this value
1875 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1876 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1877 # component CYGBLD_BUILD_REDBOOT
1878 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1882 # Explicit control over cache behaviour
1883 # These options let the default behaviour of the caches
1884 # be easily configurable.
1886 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1887 # There is no associated value.
1891 # Enable DATA cache on startup
1892 # Enabling this option will cause the data cache to be enabled
1893 # as soon as practicable when eCos starts up. One would choose
1894 # to disable this if the data cache cannot safely be turned on,
1895 # such as a case where the cache(s) require additional platform
1898 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1900 # No user value, uncomment the following line to provide one.
1902 # value_source default
1907 # DATA cache mode on startup
1908 # This option controls the mode the cache will be set to
1909 # when enabled on startup.
1911 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1913 # No user value, uncomment the following line to provide one.
1914 # user_value COPYBACK
1915 # value_source default
1916 # Default value: COPYBACK
1917 # Legal values: "COPYBACK" "WRITETHRU"
1921 # Enable INSTRUCTION cache on startup
1922 # Enabling this option will cause the instruction cache to be enabled
1923 # as soon as practicable when eCos starts up. One would choose
1924 # to disable this if the instruction cache cannot safely be turned on,
1925 # such as a case where the cache(s) require additional platform
1928 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1930 # No user value, uncomment the following line to provide one.
1932 # value_source default
1937 # Source-level debugging support
1938 # If the source level debugger gdb is to be used for debugging
1939 # application code then it may be necessary to configure in support
1940 # for this in the HAL.
1942 cdl_component CYGPKG_HAL_DEBUG {
1943 # There is no associated value.
1947 # Support for GDB stubs
1948 # The HAL implements GDB stubs for the target.
1950 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1951 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
1952 # This value cannot be modified here.
1956 # The following properties are affected by this value
1957 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1958 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1959 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1960 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1963 # Include GDB stubs in HAL
1964 # This option causes a set of GDB stubs to be included into the
1965 # system. On some target systems the GDB support will be
1966 # provided by other means, for example by a ROM monitor. On
1967 # other targets, especially when building a ROM-booting system,
1968 # the necessary support has to go into the target library
1969 # itself. When GDB stubs are include in a configuration, HAL
1970 # serial drivers must also be included.
1972 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1973 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1974 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1978 # No user value, uncomment the following line to provide one.
1980 # The inferred value should not be edited directly.
1982 # value_source inferred
1984 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1985 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1987 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1988 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
1990 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1991 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
1993 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1994 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1995 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1998 # The following properties are affected by this value
1999 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2000 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2001 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2002 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2003 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2004 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2005 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2006 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2007 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2008 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2009 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2010 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2011 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2012 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2013 # option CYGPKG_HAL_GDB_FILEIO
2014 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2015 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2016 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2017 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2019 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # Support for external break support in GDB stubs
2024 # The HAL implements external break (or asynchronous interrupt)
2025 # in the GDB stubs for the target.
2027 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2028 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2029 # This value cannot be modified here.
2033 # The following properties are affected by this value
2034 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2035 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2038 # Include GDB external break support for stubs
2039 # This option causes the GDB stub to add a serial interrupt handler
2040 # which will listen for GDB break packets. This lets you stop the
2041 # target asynchronously when using GDB, usually by hitting Control+C
2042 # or pressing the STOP button. This option differs from
2043 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2044 # GDB stubs are present.
2046 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2047 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2048 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2052 # No user value, uncomment the following line to provide one.
2054 # value_source default
2055 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2056 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2058 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2059 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2062 # The following properties are affected by this value
2063 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2064 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2065 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2066 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2067 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2068 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2071 # Platform does not support CTRLC
2073 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2074 # No options implement this inferface
2075 # This value cannot be modified here.
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2084 # Include GDB external break support when no stubs
2085 # This option adds an interrupt handler for the GDB serial line
2086 # which will listen for GDB break packets. This lets you stop the
2087 # target asynchronously when using GDB, usually by hitting Control+C
2088 # or pressing the STOP button. This option differs from
2089 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2090 # stubs are NOT present.
2092 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2093 # This option is not active
2094 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2095 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2096 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2098 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2099 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2103 # No user value, uncomment the following line to provide one.
2105 # value_source default
2106 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2107 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2109 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2110 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2113 # The following properties are affected by this value
2114 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2115 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2116 # component CYGBLD_BUILD_REDBOOT
2117 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2120 # Include GDB multi-threading debug support
2121 # This option enables some extra HAL code which is needed
2122 # to support multi-threaded source level debugging.
2124 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2125 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2126 # CYGSEM_HAL_ROM_MONITOR == 1
2127 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2131 # No user value, uncomment the following line to provide one.
2133 # value_source default
2136 # The following properties are affected by this value
2137 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2138 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2139 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2140 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2143 # Number of times to retry sending a $O packet
2144 # This option controls the number of attempts that eCos programs
2145 # will make to send a $O packet to a host GDB process. If it is
2146 # set non-zero, then the target process will attempt to resend the
2147 # $O packet data up to this number of retries. Caution: use of
2148 # this option is not recommended as it can thoroughly confuse the
2151 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2153 # No user value, uncomment the following line to provide one.
2155 # value_source default
2159 # Timeout period for GDB packets
2160 # This option controls the time (in milliseconds) that eCos programs
2161 # will wait for a response when sending packets to a host GDB process.
2162 # If this time elapses, then the packet will be resent, up to some
2163 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2165 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2167 # No user value, uncomment the following line to provide one.
2169 # value_source default
2170 # Default value: 500
2173 # Location of CRC32 table
2174 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2175 # and placed in ROM, or generated at runtime in RAM. Depending on
2176 # your memory constraints, one of these options may be better.
2178 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2180 # No user value, uncomment the following line to provide one.
2182 # value_source default
2183 # Default value: RAM
2184 # Legal values: "ROM" "RAM"
2188 # ROM monitor support
2189 # Support for ROM monitors can be built in to your application.
2190 # It may also be relevant to build your application as a ROM monitor
2191 # itself. Such options are contained here if relevant for your chosen
2192 # platform. The options and ROM monitors available to choose are
2193 # platform-dependent.
2195 cdl_component CYGPKG_HAL_ROM_MONITOR {
2196 # There is no associated value.
2198 # The following properties are affected by this value
2202 # Target has virtual vector support
2204 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2205 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2206 # This value cannot be modified here.
2210 # The following properties are affected by this value
2211 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2212 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2215 # Target supports baud rate control via vectors
2216 # Whether this target supports the __COMMCTL_GETBAUD
2217 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2219 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2220 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2221 # This value cannot be modified here.
2225 # The following properties are affected by this value
2226 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2227 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2230 # Enable use of virtual vector calling interface
2231 # Virtual vector support allows the HAL to let the ROM
2232 # monitor handle certain operations. The virtual vector table
2233 # defines a calling interface between applications running in
2234 # RAM and the ROM monitor.
2236 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2237 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2238 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2241 # Calculated value: 1
2245 # The following properties are affected by this value
2246 # component CYGBLD_BUILD_REDBOOT
2247 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2248 # package CYGPKG_DEVS_ETH_PHY
2249 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2253 # Inherit console settings from ROM monitor
2254 # When this option is set, the application will inherit
2255 # the console as set up by the ROM monitor. This means
2256 # that the application will use whatever channel and
2257 # mangling style was used by the ROM monitor when
2258 # the application was launched.
2260 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2261 # This option is not active
2262 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2263 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2267 # No user value, uncomment the following line to provide one.
2269 # value_source default
2270 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2271 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2274 # The following properties are affected by this value
2275 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2276 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2277 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2278 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2281 # Debug channel is configurable
2282 # This option is a configuration hint - it is enabled
2283 # when the HAL initialization code will make use
2284 # of the debug channel configuration option.
2286 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2287 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2294 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2297 # Console channel is configurable
2298 # This option is a configuration hint - it is enabled
2299 # when the HAL initialization code will make use
2300 # of the console channel configuration option.
2302 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2303 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2304 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2305 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2314 # Initialize whole of virtual vector table
2315 # This option will cause the whole of the virtual
2316 # vector table to be initialized with dummy values on
2317 # startup. When this option is enabled, all the
2318 # options below must also be enabled - or the
2319 # table would be empty when the application
2321 # On targets where older ROM monitors without
2322 # virtual vector support may still be in use, it is
2323 # necessary for RAM applictions to initialize the
2324 # table (since all HAL diagnostics and debug IO
2325 # happens via the table).
2327 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2329 # No user value, uncomment the following line to provide one.
2331 # value_source default
2332 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2333 # CYG_HAL_STARTUP == ROMRAM
2334 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2336 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2337 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2339 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2340 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2342 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2343 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2345 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2346 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2348 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2349 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2352 # The following properties are affected by this value
2353 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2354 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2355 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2356 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2357 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2358 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2359 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2360 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2361 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2362 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2363 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2365 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2369 # Claim virtual vector table entries by default
2370 # By default most virtual vectors will be claimed by
2371 # RAM startup configurations, meaning that the RAM
2372 # application will provide the services. The
2373 # exception is COMMS support (HAL
2374 # diagnostics/debugging IO) which is left in the
2375 # control of the ROM monitor.
2376 # The reasoning behind this is to get as much of the
2377 # code exercised during regular development so it
2378 # is known to be working the few times a new ROM
2379 # monitor or a ROM production configuration is used
2380 # - COMMS are excluded only by necessity in order to
2381 # avoid breaking an existing debugger connections
2382 # (there may be ways around this).
2383 # For production RAM configurations this option can
2384 # be switched off, causing the appliction to rely on
2385 # the ROM monitor for these services, thus
2386 # saving some space.
2387 # Individual vectors may also be left unclaimed,
2388 # controlled by the below options (meaning that the
2389 # associated service provided by the ROM monitor
2392 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2393 # This option is not active
2394 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2395 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2399 # No user value, uncomment the following line to provide one.
2401 # value_source default
2404 # The following properties are affected by this value
2405 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2406 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2407 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2408 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2409 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2410 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2411 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2412 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2415 # Claim reset virtual vectors
2416 # This option will cause the reset and kill_by_reset
2417 # virtual vectors to be claimed.
2419 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2421 # No user value, uncomment the following line to provide one.
2423 # value_source default
2424 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2426 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2429 # The following properties are affected by this value
2430 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2431 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2434 # Claim version virtual vectors
2435 # This option will cause the version
2436 # virtual vectors to be claimed.
2438 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2440 # No user value, uncomment the following line to provide one.
2442 # value_source default
2443 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2448 # Claim delay_us virtual vector
2449 # This option will cause the delay_us
2450 # virtual vector to be claimed.
2452 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2454 # No user value, uncomment the following line to provide one.
2456 # value_source default
2457 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2458 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2459 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2462 # The following properties are affected by this value
2463 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2464 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2467 # Claim cache virtual vectors
2468 # This option will cause the cache virtual vectors
2471 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2473 # No user value, uncomment the following line to provide one.
2475 # value_source default
2476 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2478 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2481 # The following properties are affected by this value
2482 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2483 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2486 # Claim data virtual vectors
2487 # This option will cause the data virtual vectors
2488 # to be claimed. At present there is only one, used
2489 # by the RedBoot ethernet driver to share diag output.
2491 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2493 # No user value, uncomment the following line to provide one.
2495 # value_source default
2496 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2497 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2498 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2501 # The following properties are affected by this value
2502 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2503 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2506 # Claim comms virtual vectors
2507 # This option will cause the communication tables
2508 # that are part of the virtual vectors mechanism to
2509 # be claimed. Note that doing this may cause an
2510 # existing ROM monitor communication connection to
2511 # be closed. For this reason, the option is disabled
2512 # per default for normal application
2515 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2517 # No user value, uncomment the following line to provide one.
2519 # value_source default
2520 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2521 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2522 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2525 # The following properties are affected by this value
2526 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2527 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2528 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2529 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2530 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2531 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2532 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2533 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2536 # Do diagnostic IO via virtual vector table
2537 # All HAL IO happens via the virtual vector table / comm
2538 # tables when those tables are supported by the HAL.
2539 # If so desired, the low-level IO functions can
2540 # still be provided by the RAM application by
2541 # enabling the CLAIM_COMMS option.
2543 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2544 # Calculated value: 1
2548 # The following properties are affected by this value
2549 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2550 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2551 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2552 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2556 # Behave as a ROM monitor
2557 # Enable this option if this program is to be used as a ROM monitor,
2558 # i.e. applications will be loaded into RAM on the TX27 module, and this
2559 # ROM monitor may process exceptions or interrupts generated from the
2560 # application. This enables features such as utilizing a separate
2561 # interrupt stack when exceptions are generated.
2563 cdl_option CYGSEM_HAL_ROM_MONITOR {
2565 # No user value, uncomment the following line to provide one.
2567 # The inferred value should not be edited directly.
2569 # value_source inferred
2571 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2572 # CYG_HAL_STARTUP == ROMRAM
2573 # CYG_HAL_STARTUP == ROMRAM
2576 # The following properties are affected by this value
2577 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2578 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2579 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2580 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2581 # option CYGPRI_REDBOOT_ROM_MONITOR
2582 # Requires: CYGSEM_HAL_ROM_MONITOR
2585 # Work with a ROM monitor
2586 # Support can be enabled for different varieties of ROM monitor.
2587 # This support changes various eCos semantics such as the encoding
2588 # of diagnostic output, or the overriding of hardware interrupt
2590 # Firstly there is "Generic" support which prevents the HAL
2591 # from overriding the hardware vectors that it does not use, to
2592 # instead allow an installed ROM monitor to handle them. This is
2593 # the most basic support which is likely to be common to most
2594 # implementations of ROM monitor.
2595 # "GDB_stubs" provides support when GDB stubs are included in
2596 # the ROM monitor or boot ROM.
2598 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2600 # No user value, uncomment the following line to provide one.
2602 # value_source default
2603 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2604 # CYG_HAL_STARTUP == ROMRAM
2606 # Legal values: "Generic" "GDB_stubs"
2607 # Requires: CYG_HAL_STARTUP == "RAM"
2608 # CYG_HAL_STARTUP == ROMRAM
2611 # The following properties are affected by this value
2612 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2613 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2614 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2615 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2616 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2617 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2618 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2619 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2623 # Platform defined I/O channels.
2624 # Platforms which provide additional I/O channels can implement
2625 # this interface, indicating that the function plf_if_init()
2626 # needs to be called.
2628 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2629 # No options implement this inferface
2630 # This value cannot be modified here.
2635 # Platform IDE I/O support.
2636 # Platforms which provide IDE controllers can implement
2637 # this interface, indicating that IDE I/O macros are
2640 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2641 # No options implement this inferface
2642 # This value cannot be modified here.
2646 # The following properties are affected by this value
2647 # component CYGSEM_REDBOOT_DISK_IDE
2648 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2651 # File I/O operations via GDB
2652 # This option enables support for various file I/O
2653 # operations using the GDB remote protocol to communicate
2654 # with GDB. The operations are then performed on the
2655 # debugging host by proxy. These operations are only
2656 # currently available by using a system call interface
2657 # to RedBoot. This may change in the future.
2659 cdl_option CYGPKG_HAL_GDB_FILEIO {
2660 # This option is not active
2661 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2662 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2666 # No user value, uncomment the following line to provide one.
2668 # value_source default
2670 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2671 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2675 # Build Compiler sanity checking tests
2676 # Enabling this option causes compiler tests to be built.
2678 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2680 # No user value, uncomment the following line to provide one.
2682 # value_source default
2685 # The following properties are affected by this value
2686 # component CYGPKG_HAL_TESTS
2687 # Calculated: "tests/context tests/basic"
2688 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2689 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2690 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2694 # This option specifies the set of tests for the common HAL.
2696 cdl_component CYGPKG_HAL_TESTS {
2697 # Calculated value: "tests/context tests/basic"
2698 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2699 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2700 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2701 # CYGINT_HAL_TESTS_NO_CACHES == 0
2702 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2703 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2705 # Current_value: tests/context tests/basic tests/cache tests/intr
2709 # Interface for cache presence
2710 # Some architectures and/or platforms do not have caches. By
2711 # implementing this interface, these can disable the various
2712 # cache-related tests.
2714 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2715 # No options implement this inferface
2716 # This value cannot be modified here.
2718 # Current value: 0 0
2720 # The following properties are affected by this value
2721 # component CYGPKG_HAL_TESTS
2722 # Calculated: "tests/context tests/basic"
2723 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2724 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2725 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2730 # The ARM architecture HAL package provides generic
2731 # support for this processor architecture. It is also
2732 # necessary to select a specific target platform HAL
2735 cdl_package CYGPKG_HAL_ARM {
2736 # Packages cannot be added or removed, nor can their version be changed,
2737 # simply by editing their value. Instead the appropriate configuration
2738 # should be used to perform these actions.
2740 # This value cannot be modified here.
2742 # Current value: 1 current
2744 # The following properties are affected by this value
2745 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2746 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2747 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2748 # ActiveIf: CYGPKG_HAL_ARM
2752 # The CPU architecture supports THUMB mode
2754 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2755 # No options implement this inferface
2756 # This value cannot be modified here.
2760 # The following properties are affected by this value
2761 # option CYGHWR_THUMB
2762 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2763 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2764 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2767 # Enable Thumb instruction set
2768 # Enable use of the Thumb instruction set.
2770 cdl_option CYGHWR_THUMB {
2771 # This option is not active
2772 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2773 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2777 # No user value, uncomment the following line to provide one.
2779 # value_source default
2782 # The following properties are affected by this value
2783 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2784 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2787 # Enable Thumb interworking compiler option
2788 # This option controls the use of -mthumb-interwork in the
2789 # compiler flags. It defaults enabled in Thumb or ROM monitor
2790 # configurations, but can be overridden for reduced memory
2791 # footprint where interworking is not a requirement.
2793 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2794 # This option is not active
2795 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2796 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2800 # No user value, uncomment the following line to provide one.
2802 # value_source default
2803 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # CYGSEM_HAL_ROM_MONITOR == 1
2809 # The platform and architecture supports Big Endian operation
2811 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2812 # No options implement this inferface
2813 # This value cannot be modified here.
2817 # The following properties are affected by this value
2818 # option CYGHWR_HAL_ARM_BIGENDIAN
2819 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2822 # Use big-endian mode
2823 # Use the CPU in big-endian mode.
2825 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2826 # This option is not active
2827 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2828 # CYGINT_HAL_ARM_BIGENDIAN == 0
2832 # No user value, uncomment the following line to provide one.
2834 # value_source default
2838 # The platform uses a processor with an ARM7 core
2840 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2841 # No options implement this inferface
2842 # This value cannot be modified here.
2846 # The following properties are affected by this value
2847 # option CYGHWR_HAL_ARM_CPU_FAMILY
2848 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2849 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2850 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2851 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2853 # option CYGHWR_HAL_ARM_CPU_FAMILY
2854 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2855 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2856 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2857 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2861 # The platform uses a processor with an ARM9 core
2863 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2864 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2865 # This value cannot be modified here.
2869 # The following properties are affected by this value
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2876 # option CYGHWR_HAL_ARM_CPU_FAMILY
2877 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2878 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2879 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2880 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2884 # The platform uses a processor with a StrongARM core
2886 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2887 # No options implement this inferface
2888 # This value cannot be modified here.
2892 # The following properties are affected by this value
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2899 # option CYGHWR_HAL_ARM_CPU_FAMILY
2900 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2901 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2902 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2903 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2907 # The platform uses a processor with a XScale core
2909 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2910 # No options implement this inferface
2911 # This value cannot be modified here.
2915 # The following properties are affected by this value
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2922 # option CYGHWR_HAL_ARM_CPU_FAMILY
2923 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2924 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2925 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2926 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2931 # It is possible to optimize code for different
2932 # ARM CPU families. This option selects which CPU to
2933 # optimize for on boards that support multiple CPU types.
2935 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2937 # No user value, uncomment the following line to provide one.
2939 # value_source default
2940 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2945 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2946 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2947 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2948 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2950 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2951 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2952 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2953 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2955 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2956 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2957 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2958 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2961 # Provide diagnostic dump for exceptions
2962 # Print messages about hardware exceptions, including
2963 # raw exception frame dump and register contents.
2965 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2967 # No user value, uncomment the following line to provide one.
2969 # value_source default
2971 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2972 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2976 # Process all exceptions with the eCos application
2977 # Normal RAM-based programs which do not include GDB stubs
2978 # defer processing of the illegal instruction exception to GDB.
2979 # Setting this options allows the program to explicitly handle
2980 # the illegal instruction exception itself. Note: this will
2981 # prevent the use of GDB to debug the application as breakpoints
2982 # will no longer work.
2984 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2986 # No user value, uncomment the following line to provide one.
2988 # value_source default
2992 # Support GDB thread operations via ICE/Multi-ICE
2993 # Allow GDB to get thread information via the ICE/Multi-ICE
2996 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2998 # No user value, uncomment the following line to provide one.
3000 # value_source default
3002 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3003 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3005 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3006 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3008 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3009 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3013 # Support for 'gprof' callbacks
3014 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3015 # to acquire the interrupt-context PC and SP, when this option is
3018 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3019 # This option is not active
3020 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3021 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3023 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3025 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3028 # Calculated value: 1
3033 # Accept exceptions and irq's occurring in user mode
3034 # For standalone Redboot based programs running in user mode.
3036 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3038 # No user value, uncomment the following line to provide one.
3040 # value_source default
3044 # Preserve svc spsr before returning to svc mode
3045 # This option secures exception and breakpoint processing
3046 # triggered during execution of application specific SWI
3049 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3051 # No user value, uncomment the following line to provide one.
3053 # value_source default
3059 cdl_option CYGBLD_LINKER_SCRIPT {
3060 # Calculated value: "src/arm.ld"
3062 # Current_value: src/arm.ld
3065 # Implementations of hal_arm_mem_real_region_top()
3067 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3068 # No options implement this inferface
3069 # This value cannot be modified here.
3074 # Freescale SoC architecture
3075 # This HAL variant package provides generic
3076 # support for the Freescale SoC. It is also
3077 # necessary to select a specific target platform HAL
3080 cdl_package CYGPKG_HAL_ARM_MX27 {
3081 # Packages cannot be added or removed, nor can their version be changed,
3082 # simply by editing their value. Instead the appropriate configuration
3083 # should be used to perform these actions.
3085 # This value cannot be modified here.
3087 # Current value: 1 current
3089 # The following properties are affected by this value
3094 # The processor can run at various frequencies.
3095 # These values are expressed in KHz. Note that there are
3096 # several steppings of the rate to run at different
3097 # maximum frequencies. Check the specs to make sure that your
3098 # particular processor can run at the rate you select here.
3100 cdl_option CYGHWR_HAL_ARM_SOC_PLL_REF_CLOCK {
3104 # Default value: 26000000
3105 # Legal values: 26000000 27000000 33554432 32768000
3108 # Processor clock rate
3109 # The processor can run at various frequencies.
3110 # These values are expressed in KHz. Note that there are
3111 # several steppings of the rate to run at different
3112 # maximum frequencies. Check the specs to make sure that your
3113 # particular processor can run at the rate you select here.
3115 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3117 # No user value, uncomment the following line to provide one.
3119 # value_source default
3120 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3121 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 399
3122 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3123 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3125 # Legal values: 266 399
3128 # System clock (hclk) rate
3129 # The processor can run at various frequencies.
3130 # These values are expressed in KHz. Note that there are
3131 # several steppings of the rate to run at different
3132 # maximum frequencies. Check the specs to make sure that your
3133 # particular processor can run at the rate you select here.
3135 cdl_option CYGHWR_HAL_ARM_SOC_SYSTEM_CLOCK {
3137 # No user value, uncomment the following line to provide one.
3139 # value_source default
3140 # Default value: 133
3141 # Legal values: 133 100
3144 # Real-time clock constants
3146 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3147 # There is no associated value.
3151 # Real-time clock numerator
3153 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3154 # Calculated value: 1000000000
3156 # Current_value: 1000000000
3159 # Real-time clock denominator
3160 # This option selects the heartbeat rate for the real-time clock.
3161 # The rate is specified in ticks per second. Change this value
3162 # with caution - too high and your system will become saturated
3163 # just handling clock interrupts, too low and some operations
3164 # such as thread scheduling may become sluggish.
3166 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3168 # No user value, uncomment the following line to provide one.
3170 # value_source default
3171 # Default value: 100
3173 # The following properties are affected by this value
3174 # option CYGNUM_HAL_RTC_PERIOD
3175 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3178 # Real-time clock period
3180 cdl_option CYGNUM_HAL_RTC_PERIOD {
3181 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3182 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3184 # Current_value: 36864
3188 # UART1 available as diagnostic/debug channel
3189 # The chip has multiple serial channels which may be
3190 # used for different things on different platforms. This
3191 # interface allows a platform to indicate that the specified
3192 # serial port can be used as a diagnostic and/or debug channel.
3194 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3195 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3196 # This value cannot be modified here.
3200 # The following properties are affected by this value
3203 # UART2 available as diagnostic/debug channel
3204 # The chip has multiple serial channels which may be
3205 # used for different things on different platforms. This
3206 # interface allows a platform to indicate that the specified
3207 # serial port can be used as a diagnostic and/or debug channel.
3209 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3210 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3211 # This value cannot be modified here.
3215 # The following properties are affected by this value
3218 # UART3 available as diagnostic/debug channel
3219 # The chip has multiple serial channels which may be
3220 # used for different things on different platforms. This
3221 # interface allows a platform to indicate that the specified
3222 # serial port can be used as a diagnostic and/or debug channel.
3224 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3225 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3226 # This value cannot be modified here.
3230 # The following properties are affected by this value
3233 # UART4 available as diagnostic/debug channel
3234 # The chip has multiple serial channels which may be
3235 # used for different things on different platforms. This
3236 # interface allows a platform to indicate that the specified
3237 # serial port can be used as a diagnostic and/or debug channel.
3239 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3240 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3241 # This value cannot be modified here.
3245 # The following properties are affected by this value
3248 # UART5 available as diagnostic/debug channel
3249 # The chip has multiple serial channels which may be
3250 # used for different things on different platforms. This
3251 # interface allows a platform to indicate that the specified
3252 # serial port can be used as a diagnostic and/or debug channel.
3254 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3255 # No options implement this inferface
3256 # This value cannot be modified here.
3261 # UART6 available as diagnostic/debug channel
3262 # The chip has multiple serial channels which may be
3263 # used for different things on different platforms. This
3264 # interface allows a platform to indicate that the specified
3265 # serial port can be used as a diagnostic and/or debug channel.
3267 cdl_interface CYGHWR_HAL_ARM_SOC_UART6 {
3268 # No options implement this inferface
3269 # This value cannot be modified here.
3275 # This HAL platform package provides generic
3276 # support for the Ka-Ro electronics TX27 module.
3278 cdl_package CYGPKG_HAL_ARM_TX27KARO {
3279 # Packages cannot be added or removed, nor can their version be changed,
3280 # simply by editing their value. Instead the appropriate configuration
3281 # should be used to perform these actions.
3283 # This value cannot be modified here.
3285 # Current value: 1 current
3286 # Requires: CYGINT_ISO_CTYPE
3287 # CYGINT_ISO_CTYPE == 1
3289 # Requires: CYGBLD_BUILD_REDBOOT == 1
3290 # CYGBLD_BUILD_REDBOOT == 1
3296 # The only startup type allowed is ROMRAM, since this will allow
3297 # the program to exist in ROM, but be copied to RAM during startup
3298 # which is required to boot from NAND flash.
3300 cdl_component CYG_HAL_STARTUP {
3302 # No user value, uncomment the following line to provide one.
3304 # value_source default
3305 # Default value: ROMRAM
3306 # Legal values: "ROMRAM"
3308 # The following properties are affected by this value
3309 # option CYGSEM_HAL_ROM_MONITOR
3310 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3311 # option CYGSEM_HAL_ROM_MONITOR
3312 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3313 # option CYGSEM_HAL_USE_ROM_MONITOR
3314 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3315 # option CYGSEM_HAL_USE_ROM_MONITOR
3316 # Requires: CYG_HAL_STARTUP == "RAM"
3317 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3318 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3319 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3320 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3321 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3322 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3323 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3324 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3325 # option CYGPRI_REDBOOT_ROM_MONITOR
3326 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3327 # option CYGPRI_REDBOOT_ROM_MONITOR
3328 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3331 # Diagnostic serial port baud rate
3332 # This option selects the baud rate used for the console port.
3333 # Note: this should match the value chosen for the GDB port if the
3334 # console and GDB port are the same.
3336 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3338 # No user value, uncomment the following line to provide one.
3340 # value_source default
3341 # Default value: 115200
3342 # Legal values: 9600 19200 38400 57600 115200
3345 # GDB serial port baud rate
3346 # This option selects the baud rate used for the GDB port.
3347 # Note: this should match the value chosen for the console port if the
3348 # console and GDB port are the same.
3350 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3352 # No user value, uncomment the following line to provide one.
3354 # value_source default
3355 # Default value: 115200
3356 # Legal values: 9600 19200 38400 57600 115200
3359 # Number of communication channels on the TX27
3361 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3362 # Calculated value: 3
3366 # The following properties are affected by this value
3367 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3368 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3369 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3370 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3371 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3372 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # The TX27 provides access to three serial ports. This option
3377 # chooses which port will be used to connect to a host
3380 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3381 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3382 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3386 # No user value, uncomment the following line to provide one.
3388 # value_source default
3390 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3391 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3394 # Default console channel.
3396 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3397 # Calculated value: 0
3400 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3401 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3403 # The following properties are affected by this value
3404 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3405 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3408 # Console serial port
3409 # The TX27 provides access to three serial ports. This option
3410 # chooses which port will be used for console output.
3412 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3413 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3414 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3418 # No user value, uncomment the following line to provide one.
3420 # value_source default
3421 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3422 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3424 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3425 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3428 # Ka-Ro electronics TX27 module build options
3429 # Package specific build options including control over
3430 # compiler flags used only in building this package,
3431 # and details of which tests are built.
3433 cdl_component CYGPKG_HAL_ARM_TX27_OPTIONS {
3434 # There is no associated value.
3435 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3436 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3442 # This option specifies the SDRAM size of the TX27 module.
3444 cdl_option CYGNUM_HAL_ARM_TX27_SDRAM_SIZE {
3446 # No user value, uncomment the following line to provide one.
3447 # user_value 0x04000000
3448 # value_source default
3449 # Default value: 0x04000000
3450 # Legal values: 0x04000000 0x08000000
3453 # Enable low level debugging with LED
3454 # This option enables low level debugging by blink codes
3455 # of the LED on STK5.
3457 cdl_option CYGOPT_HAL_ARM_TX27_DEBUG {
3459 # No user value, uncomment the following line to provide one.
3461 # value_source default
3462 # Default value: false
3463 # false (unknown) == 0
3467 # Additional compiler flags
3468 # This option modifies the set of compiler flags for
3469 # building the TX27 HAL. These flags are used in addition
3470 # to the set of global flags.
3472 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_ADD {
3474 # No user value, uncomment the following line to provide one.
3476 # value_source default
3480 # Suppressed compiler flags
3481 # This option modifies the set of compiler flags for
3482 # building the TX27 HAL. These flags are removed from
3483 # the set of global flags if present.
3485 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_REMOVE {
3487 # No user value, uncomment the following line to provide one.
3489 # value_source default
3496 cdl_component CYGHWR_MEMORY_LAYOUT {
3497 # Calculated value: "arm_tx27_romram"
3499 # Current_value: arm_tx27_romram
3503 # Memory layout linker script fragment
3505 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3506 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.ldi>"
3508 # Current_value: <pkgconf/mlt_arm_tx27_romram.ldi>
3511 # Memory layout header file
3513 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3514 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.h>"
3516 # Current_value: <pkgconf/mlt_arm_tx27_romram.h>
3525 # Common types and useful macros.
3526 # Tracing and assertion facilities.
3527 # Package startup options.
3529 cdl_package CYGPKG_INFRA {
3530 # Packages cannot be added or removed, nor can their version be changed,
3531 # simply by editing their value. Instead the appropriate configuration
3532 # should be used to perform these actions.
3534 # This value cannot be modified here.
3536 # Current value: 1 current
3538 # The following properties are affected by this value
3539 # package CYGPKG_HAL
3540 # Requires: CYGPKG_INFRA
3541 # component CYGBLD_BUILD_REDBOOT
3542 # Requires: CYGPKG_INFRA
3547 # The eCos source code contains a significant amount of
3548 # internal debugging support, in the form of assertions and
3550 # Assertions check at runtime that various conditions are as
3551 # expected; if not, execution is halted.
3552 # Tracing takes the form of text messages that are output
3553 # whenever certain events occur, or whenever functions are
3555 # The most important property of these checks and messages is
3556 # that they are not required for the program to run.
3557 # It is prudent to develop software with assertions enabled,
3558 # but disable them when making a product release, thus
3559 # removing the overhead of that checking.
3560 # It is possible to enable assertions and tracing
3562 # There are also options controlling the exact behaviour of
3563 # the assertion and tracing facilities, thus giving users
3564 # finer control over the code and data size requirements.
3566 cdl_component CYGPKG_INFRA_DEBUG {
3568 # No user value, uncomment the following line to provide one.
3570 # value_source default
3573 # The following properties are affected by this value
3574 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3575 # ActiveIf: CYGPKG_INFRA_DEBUG
3580 # If this option is defined, asserts in the code are tested.
3581 # Assert functions (CYG_ASSERT()) are defined in
3582 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3583 # If it is not defined, these result in no additional
3584 # object code and no checking of the asserted conditions.
3586 cdl_component CYGDBG_USE_ASSERTS {
3587 # This option is not active
3588 # The parent CYGPKG_INFRA_DEBUG is disabled
3591 # No user value, uncomment the following line to provide one.
3593 # value_source default
3595 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3596 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3599 # The following properties are affected by this value
3600 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3601 # Requires: CYGDBG_USE_ASSERTS
3602 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3603 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3608 # This option allows individual control of preconditions.
3609 # A precondition is one type of assert, which it is
3610 # useful to control separately from more general asserts.
3611 # The function is CYG_PRECONDITION(condition,msg).
3613 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3614 # This option is not active
3615 # The parent CYGDBG_USE_ASSERTS is not active
3618 # No user value, uncomment the following line to provide one.
3620 # value_source default
3625 # This option allows individual control of postconditions.
3626 # A postcondition is one type of assert, which it is
3627 # useful to control separately from more general asserts.
3628 # The function is CYG_POSTCONDITION(condition,msg).
3630 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3631 # This option is not active
3632 # The parent CYGDBG_USE_ASSERTS is not active
3635 # No user value, uncomment the following line to provide one.
3637 # value_source default
3642 # This option allows individual control of loop invariants.
3643 # A loop invariant is one type of assert, which it is
3644 # useful to control separately from more general asserts,
3645 # particularly since a loop invariant is typically evaluated
3646 # a great many times when used correctly.
3647 # The function is CYG_LOOP_INVARIANT(condition,msg).
3649 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3650 # This option is not active
3651 # The parent CYGDBG_USE_ASSERTS is not active
3654 # No user value, uncomment the following line to provide one.
3656 # value_source default
3661 # All assertions within eCos contain a text message
3662 # which should give some information about the condition
3664 # These text messages will end up being embedded in the
3665 # application image and hence there is a significant penalty
3666 # in terms of image size.
3667 # It is possible to suppress the use of these messages by
3668 # disabling this option.
3669 # This results in smaller code size, but there is less
3670 # human-readable information if an assertion actually gets
3673 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3674 # This option is not active
3675 # The parent CYGDBG_USE_ASSERTS is not active
3678 # No user value, uncomment the following line to provide one.
3680 # value_source default
3686 # If this option is defined, tracing operations
3687 # result in output or logging, depending on other options.
3688 # This may have adverse effects on performance, if the time
3689 # taken to output message overwhelms the available CPU
3690 # power or output bandwidth.
3691 # Trace functions (CYG_TRACE()) are defined in
3692 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3693 # If it is not defined, these result in no additional
3694 # object code and no trace information.
3696 cdl_component CYGDBG_USE_TRACING {
3697 # This option is not active
3698 # The parent CYGPKG_INFRA_DEBUG is disabled
3701 # No user value, uncomment the following line to provide one.
3703 # value_source default
3705 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3706 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3709 # The following properties are affected by this value
3710 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3711 # ActiveIf: CYGDBG_USE_TRACING
3712 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3713 # ActiveIf: CYGDBG_USE_TRACING
3714 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3715 # ActiveIf: CYGDBG_USE_TRACING
3716 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3717 # ActiveIf: CYGDBG_USE_TRACING
3718 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3719 # ActiveIf: CYGDBG_USE_TRACING
3723 # Trace function reports
3724 # This option allows individual control of
3725 # function entry/exit tracing, independent of
3726 # more general tracing output.
3727 # This may be useful to remove clutter from a
3730 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3731 # This option is not active
3732 # The parent CYGDBG_USE_TRACING is not active
3733 # The parent CYGDBG_USE_TRACING is disabled
3736 # No user value, uncomment the following line to provide one.
3738 # value_source default
3743 # All trace calls within eCos contain a text message
3744 # which should give some information about the circumstances.
3745 # These text messages will end up being embedded in the
3746 # application image and hence there is a significant penalty
3747 # in terms of image size.
3748 # It is possible to suppress the use of these messages by
3749 # disabling this option.
3750 # This results in smaller code size, but there is less
3751 # human-readable information available in the trace output,
3752 # possibly only filenames and line numbers.
3754 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3755 # This option is not active
3756 # The parent CYGDBG_USE_TRACING is not active
3757 # The parent CYGDBG_USE_TRACING is disabled
3760 # No user value, uncomment the following line to provide one.
3762 # value_source default
3767 # Trace output implementations
3769 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3770 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3771 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3772 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3773 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3774 # This option is not active
3775 # The parent CYGPKG_INFRA_DEBUG is disabled
3777 # This value cannot be modified here.
3781 # The following properties are affected by this value
3782 # component CYGDBG_USE_ASSERTS
3783 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3784 # component CYGDBG_USE_TRACING
3785 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3789 # A null output module which is useful when
3790 # debugging interactively; the output routines
3791 # can be breakpointed rather than have them actually
3792 # 'print' something.
3794 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3795 # This option is not active
3796 # The parent CYGPKG_INFRA_DEBUG is disabled
3799 # No user value, uncomment the following line to provide one.
3801 # value_source default
3806 # An output module which produces simple output
3807 # from tracing and assertion events.
3809 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3810 # This option is not active
3811 # The parent CYGPKG_INFRA_DEBUG is disabled
3814 # No user value, uncomment the following line to provide one.
3816 # value_source default
3821 # An output module which produces fancy output
3822 # from tracing and assertion events.
3824 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3825 # This option is not active
3826 # The parent CYGPKG_INFRA_DEBUG is disabled
3829 # No user value, uncomment the following line to provide one.
3831 # value_source default
3836 # An output module which buffers output
3837 # from tracing and assertion events. The stored
3838 # messages are output when an assert fires, or
3839 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3841 # Of course, there will only be stored messages
3842 # if tracing per se (CYGDBG_USE_TRACING)
3845 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3846 # This option is not active
3847 # The parent CYGPKG_INFRA_DEBUG is disabled
3850 # No user value, uncomment the following line to provide one.
3852 # value_source default
3858 # The size of the trace buffer. This counts the number
3859 # of trace records stored. When the buffer fills it
3860 # either wraps, stops recording, or generates output.
3862 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3863 # This option is not active
3864 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3865 # ActiveIf constraint: CYGDBG_USE_TRACING
3866 # CYGDBG_USE_TRACING == 0
3870 # No user value, uncomment the following line to provide one.
3872 # value_source default
3874 # Legal values: 5 to 65535
3877 # Wrap trace buffer when full
3878 # When the trace buffer has filled with records it
3879 # starts again at the beginning. Hence only the last
3880 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3883 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3884 # This option is not active
3885 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3886 # ActiveIf constraint: CYGDBG_USE_TRACING
3887 # CYGDBG_USE_TRACING == 0
3891 # No user value, uncomment the following line to provide one.
3893 # value_source default
3897 # Halt trace buffer when full
3898 # When the trace buffer has filled with records it
3899 # stops recording. Hence only the first
3900 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3903 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3904 # This option is not active
3905 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3906 # ActiveIf constraint: CYGDBG_USE_TRACING
3907 # CYGDBG_USE_TRACING == 0
3911 # No user value, uncomment the following line to provide one.
3913 # value_source default
3917 # Print trace buffer when full
3918 # When the trace buffer has filled with records it
3919 # prints the contents of the buffer. The buffer is then
3920 # emptied and the system continues.
3922 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3923 # This option is not active
3924 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3925 # ActiveIf constraint: CYGDBG_USE_TRACING
3926 # CYGDBG_USE_TRACING == 0
3930 # No user value, uncomment the following line to provide one.
3932 # value_source default
3936 # Print trace buffer on assert fail
3937 # When an assertion fails the trace buffer will be
3938 # printed to the default diagnostic device.
3940 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3941 # This option is not active
3942 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3943 # ActiveIf constraint: CYGDBG_USE_TRACING
3944 # CYGDBG_USE_TRACING == 0
3948 # No user value, uncomment the following line to provide one.
3950 # value_source default
3955 # Use function names
3956 # All trace and assert calls within eCos contain a
3957 # reference to the builtin macro '__PRETTY_FUNCTION__',
3958 # which evaluates to a string containing
3959 # the name of the current function.
3960 # This is useful when reading a trace log.
3961 # It is possible to suppress the use of the function name
3962 # by disabling this option.
3963 # This results in smaller code size, but there is less
3964 # human-readable information available in the trace output,
3965 # possibly only filenames and line numbers.
3967 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3968 # This option is not active
3969 # The parent CYGPKG_INFRA_DEBUG is disabled
3972 # No user value, uncomment the following line to provide one.
3974 # value_source default
3980 # Some packages require a startup routine to be called.
3981 # This can be carried out by application code, by supplying
3982 # a routine called cyg_package_start() which calls the
3983 # appropriate package startup routine(s).
3984 # Alternatively, this routine can be constructed automatically
3985 # and configured to call the startup routines of your choice.
3987 cdl_component CYGPKG_INFRA_STARTUP {
3988 # There is no associated value.
3992 # Start uITRON subsystem
3993 # Generate a call to initialize the
3994 # uITRON compatibility subsystem
3995 # within the system version of cyg_package_start().
3996 # This enables compatibility with uITRON.
3997 # You must configure uITRON with the correct tasks before
3998 # starting the uItron subsystem.
3999 # If this is disabled, and you want to use uITRON,
4000 # you must call cyg_uitron_start() from your own
4001 # cyg_package_start() or cyg_userstart().
4003 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4004 # This option is not active
4005 # ActiveIf constraint: CYGPKG_UITRON
4006 # CYGPKG_UITRON (unknown) == 0
4010 # No user value, uncomment the following line to provide one.
4012 # value_source default
4014 # Requires: CYGPKG_UITRON
4015 # CYGPKG_UITRON (unknown) == 0
4020 # Smaller slower memcpy()
4021 # Enabling this option causes the implementation of
4022 # the standard memcpy() routine to reduce code
4023 # size at the expense of execution speed. This
4024 # option is automatically enabled with the use of
4025 # the -Os option to the compiler. Also note that
4026 # the compiler will try to use its own builtin
4027 # version of memcpy() if possible, ignoring the
4028 # implementation in this package, unless given
4029 # the -fno-builtin compiler option.
4031 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4033 # No user value, uncomment the following line to provide one.
4035 # value_source default
4039 # Smaller slower memset()
4040 # Enabling this option causes the implementation of
4041 # the standard memset() routine to reduce code
4042 # size at the expense of execution speed. This
4043 # option is automatically enabled with the use of
4044 # the -Os option to the compiler. Also note that
4045 # the compiler will try to use its own builtin
4046 # version of memset() if possible, ignoring the
4047 # implementation in this package, unless given
4048 # the -fno-builtin compiler option.
4050 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4052 # No user value, uncomment the following line to provide one.
4054 # value_source default
4058 # Provide empty C++ delete functions
4059 # To deal with virtual destructors, where the correct delete()
4060 # function must be called for the derived class in question, the
4061 # underlying delete is called when needed, from destructors. This
4062 # is regardless of whether the destructor is called by delete itself.
4063 # So there is a reference to delete() from all destructors. The
4064 # default builtin delete() attempts to call free() if there is
4065 # one defined. So, if you have destructors, and you have free(),
4066 # as in malloc() and free(), any destructor counts as a reference
4067 # to free(). So the dynamic memory allocation code is linked
4068 # in regardless of whether it gets explicitly called. This
4069 # increases code and data size needlessly.
4070 # To defeat this undesirable behaviour, we define empty versions
4071 # of delete and delete. But doing this prevents proper use
4072 # of dynamic memory in C++ programs via C++'s new and delete
4074 # Therefore, this option is provided
4075 # for explicitly disabling the provision of these empty functions,
4076 # so that new and delete can be used, if that is what is required.
4078 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4080 # No user value, uncomment the following line to provide one.
4082 # value_source default
4086 # Threshold for valid number of delete calls
4087 # Some users don't know about the empty delete function and then
4088 # wonder why their C++ classes are leaking memory. If
4089 # INFRA_DEBUG is enabled we keep a counter for the number of
4090 # times delete is called. If it goes above this threshold we throw
4091 # an assertion failure. This should point heavy users of
4092 # delete in the right direction without upsetting those who want
4093 # an empty delete function.
4095 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4096 # This option is not active
4097 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4098 # CYGPKG_INFRA_DEBUG == 0
4102 # No user value, uncomment the following line to provide one.
4104 # value_source default
4105 # Default value: 100
4108 # Provide dummy abort() function
4109 # This option controls the inclusion of a dummy abort() function.
4110 # Parts of the C and C++ compiler runtime systems contain references
4111 # to abort(), particulary in the C++ exception handling code. It is
4112 # not possible to eliminate these references, so this dummy function
4113 # in included to satisfy them. It is not expected that this function
4114 # will ever be called, so its current behaviour is to simply loop.
4116 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4118 # No user value, uncomment the following line to provide one.
4120 # value_source default
4121 # Default value: CYGINT_ISO_EXIT == 0
4122 # CYGINT_ISO_EXIT == 0
4124 # Requires: !CYGINT_ISO_EXIT
4125 # CYGINT_ISO_EXIT == 0
4129 # Reset platform at end of test case execution
4130 # If this option is set then test case programs will reset the platform
4131 # when they terminate, as opposed to the default which is to just hang
4134 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4136 # No user value, uncomment the following line to provide one.
4138 # value_source default
4142 # Provide dummy strlen() function
4143 # This option controls the inclusion of a dummy strlen() function.
4144 # Parts of the C and C++ compiler runtime systems contain references
4145 # to strlen(), particulary in the C++ exception handling code. It is
4146 # not possible to eliminate these references, so this dummy function
4147 # in included to satisfy them. While it is not expected that this function
4148 # will ever be called, it is functional but uses the simplest, smallest
4149 # algorithm. There is a faster version of strlen() in the C library.
4151 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4153 # No user value, uncomment the following line to provide one.
4155 # value_source default
4156 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4157 # CYGINT_ISO_STRING_STRFUNCS == 1
4159 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4160 # CYGINT_ISO_STRING_STRFUNCS == 1
4164 # Make all compiler warnings show as errors
4165 # Enabling this option will cause all compiler warnings to show
4166 # as errors and bring the library build to a halt. This is used
4167 # to ensure that the code base is warning free, and thus ensure
4168 # that newly introduced warnings stand out and get fixed before
4169 # they show up as weird run-time behavior.
4171 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4176 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4177 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4180 # The following properties are affected by this value
4181 # option CYGBLD_GLOBAL_CFLAGS
4182 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4185 # Make compiler and assembler communicate by pipe
4186 # Enabling this option will cause the compiler to feed the
4187 # assembly output the the assembler via a pipe instead of
4188 # via a temporary file. This normally reduces the build
4191 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4196 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4197 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4201 # Infra build options
4202 # Package specific build options including control over
4203 # compiler flags used only in building this package.
4205 cdl_component CYGPKG_INFRA_OPTIONS {
4206 # There is no associated value.
4210 # Additional compiler flags
4211 # This option modifies the set of compiler flags for
4212 # building the eCos infra package. These flags are used
4213 # in addition to the set of global flags.
4215 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4217 # No user value, uncomment the following line to provide one.
4218 # user_value "-fno-rtti -Woverloaded-virtual"
4219 # value_source default
4220 # Default value: "-fno-rtti -Woverloaded-virtual"
4223 # Suppressed compiler flags
4224 # This option modifies the set of compiler flags for
4225 # building the eCos infra package. These flags are removed from
4226 # the set of global flags if present.
4228 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4230 # No user value, uncomment the following line to provide one.
4231 # user_value -Wno-pointer-sign
4232 # value_source default
4233 # Default value: -Wno-pointer-sign
4236 # Suppressed linker flags
4237 # This option modifies the set of linker flags for
4238 # building the eCos infra package tests. These flags are removed from
4239 # the set of global flags if present.
4241 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4243 # No user value, uncomment the following line to provide one.
4244 # user_value -Wl,--gc-sections
4245 # value_source default
4246 # Default value: -Wl,--gc-sections
4249 # Additional linker flags
4250 # This option modifies the set of linker flags for
4251 # building the eCos infra package tests. These flags are added to
4252 # the set of global flags if present.
4254 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4256 # No user value, uncomment the following line to provide one.
4257 # user_value -Wl,--fatal-warnings
4258 # value_source default
4259 # Default value: -Wl,--fatal-warnings
4262 # Infra package tests
4264 cdl_component CYGPKG_INFRA_TESTS {
4265 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4267 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4271 # Number of times a test runs
4272 # This option controls the number of times tests will execute their
4273 # basic function. Not all tests will honor this setting, but those
4274 # that do will execute the test N times before terminating. A value
4275 # less than 0 indicates to run forever.
4277 cdl_option CYGNUM_TESTS_RUN_COUNT {
4279 # No user value, uncomment the following line to provide one.
4281 # value_source default
4288 # Redboot ROM monitor
4289 # doc: ref/redboot.html
4290 # This package supports the Redboot [stand-alone debug monitor]
4291 # using eCos as the underlying board support mechanism.
4293 cdl_package CYGPKG_REDBOOT {
4294 # Packages cannot be added or removed, nor can their version be changed,
4295 # simply by editing their value. Instead the appropriate configuration
4296 # should be used to perform these actions.
4298 # This value cannot be modified here.
4300 # Current value: 1 current
4301 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4302 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4305 # The following properties are affected by this value
4306 # component CYGPKG_REDBOOT_ARM_OPTIONS
4307 # ActiveIf: CYGPKG_REDBOOT
4308 # component CYGPKG_REDBOOT_HAL_OPTIONS
4309 # ActiveIf: CYGPKG_REDBOOT
4310 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
4311 # ActiveIf: CYGPKG_REDBOOT
4312 # option CYGSEM_IO_ETH_DRIVERS_WARN
4313 # ActiveIf: CYGPKG_REDBOOT
4317 # Include support for ELF file format
4319 cdl_component CYGSEM_REDBOOT_ELF {
4321 # No user value, uncomment the following line to provide one.
4323 # value_source default
4328 # Use the virtual address in the ELF headers
4329 # The ELF headers contain both a virtual and a physical address
4330 # for where code/data should be loaded. By default the physical
4331 # address is used but sometimes it is necassary to use the
4332 # virtual address because of bugy toolchains
4334 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4336 # No user value, uncomment the following line to provide one.
4338 # value_source default
4343 # Methods of loading images using redboot
4345 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4346 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4347 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4348 # This value cannot be modified here.
4352 # The following properties are affected by this value
4353 # component CYGBLD_BUILD_REDBOOT
4354 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4357 # Build Redboot ROM ELF image
4358 # This option enables the building of the Redboot ELF image.
4359 # The image may require further relocation or symbol
4360 # stripping before being converted to a binary image.
4361 # This is handled by a rule in the target CDL.
4363 cdl_component CYGBLD_BUILD_REDBOOT {
4365 # No user value, uncomment the following line to provide one.
4367 # The inferred value should not be edited directly.
4369 # value_source inferred
4371 # Requires: CYGPKG_INFRA
4372 # CYGPKG_INFRA == current
4374 # Requires: CYGPKG_ISOINFRA
4375 # CYGPKG_ISOINFRA == current
4377 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4378 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4380 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4381 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4383 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4384 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4386 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4387 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4389 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4390 # CYGINT_ISO_STRING_MEMFUNCS == 1
4392 # Requires: CYGINT_ISO_STRING_STRFUNCS
4393 # CYGINT_ISO_STRING_STRFUNCS == 1
4395 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4396 # CYGINT_REDBOOT_LOAD_METHOD == 2
4399 # The following properties are affected by this value
4400 # package CYGPKG_HAL_ARM_TX27KARO
4401 # Requires: CYGBLD_BUILD_REDBOOT == 1
4402 # option CYGBLD_BUILD_REDBOOT_BIN
4403 # ActiveIf: CYGBLD_BUILD_REDBOOT
4407 # Include GDB support in RedBoot
4408 # RedBoot normally includes support for the GDB debugging
4409 # protocols. This option allows this to be disabled which
4410 # may yield a substantial savings in terms of code and memory
4413 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4414 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4415 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4422 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4423 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4425 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4426 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4430 # Threads debugging support
4431 # Enabling this option will include special code in the
4432 # GDB stubs to support debugging of threaded programs. In
4433 # the case of eCos programs, this support allows GDB to
4434 # have complete access to the eCos threads in the
4437 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4438 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4439 # CYG_HAL_STARTUP == ROMRAM
4443 # No user value, uncomment the following line to provide one.
4445 # value_source default
4447 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4448 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4452 # Customized version string
4453 # Use this option to define a customized version "string" for
4454 # RedBoot. Note: this value is only cosmetic, displayed by the
4455 # "version" command, but is useful for providing site specific
4456 # information about the RedBoot configuration.
4458 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4460 # No user value, uncomment the following line to provide one.
4462 # The inferred value should not be edited directly.
4463 inferred_value 1 "Ka-Ro 2009-06-10"
4464 # value_source inferred
4465 # Default value: 0 0
4468 # Enable command line editing
4469 # If this option is non-zero, RedBoot will remember the
4470 # last N command lines. These lines may be reused.
4471 # Enabling this history will also enable rudimentary
4472 # editting of the lines themselves.
4474 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4476 # No user value, uncomment the following line to provide one.
4478 # value_source default
4481 # The following properties are affected by this value
4482 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4483 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4484 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4485 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4488 # Enable command line editing using ANSI arrows, etc
4489 # If this option is enabled, RedBoot will accept standard ANSI key
4490 # sequences for cursor movement (along with the emacs style keys).
4492 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4493 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4494 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4498 # No user value, uncomment the following line to provide one.
4500 # value_source default
4504 # Enable history command and expansion
4505 # Enabling this option will allow RedBoot to provide a
4506 # history command to list previous commands. Also enables
4507 # history expansion via '!' character similar to bash
4510 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4512 # No user value, uncomment the following line to provide one.
4514 # value_source default
4516 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4517 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4521 # Number of unique RAM segments on platform
4522 # Change this option to be the number of memory segments which are
4523 # supported by the platform. If the value is greater than 1, then
4524 # a platform specific function must provide information about the
4525 # additional segments.
4527 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4529 # No user value, uncomment the following line to provide one.
4531 # value_source default
4535 # Include support gzip/zlib decompression
4537 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4538 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4539 # CYGPKG_COMPRESS_ZLIB == current
4543 # No user value, uncomment the following line to provide one.
4545 # value_source default
4548 # The following properties are affected by this value
4549 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4550 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4554 # Size of zlib decompression buffer
4555 # This is the size of the buffer filled with incoming data
4556 # during load before calls are made to the decompressor
4557 # function. For ethernet downloads this can be made bigger
4558 # (at the cost of memory), but for serial downloads on slow
4559 # processors it may be necessary to reduce the size to
4560 # avoid serial overruns. zlib appears to bail out if less
4561 # than five bytes are available initially so this is the
4564 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4566 # No user value, uncomment the following line to provide one.
4568 # value_source default
4570 # Legal values: 5 to 256
4573 # Support compression of Flash images
4574 # This CDL indicates whether flash images can
4575 # be decompressed from gzip/zlib format into RAM.
4577 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4578 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4579 # CYGPKG_REDBOOT_FLASH == 1
4581 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4582 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4583 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4586 # Calculated value: 1
4591 # Include GZIP uncompress command
4592 # Enable this option to include a 'gunzip' command
4593 # to uncompress GZIP compressed data.
4595 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4597 # No user value, uncomment the following line to provide one.
4599 # value_source default
4603 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4604 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4606 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4608 # No user value, uncomment the following line to provide one.
4610 # The inferred value should not be edited directly.
4612 # value_source inferred
4615 # The following properties are affected by this value
4616 # option CYGPRI_REDBOOT_ZLIB_FLASH
4617 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4621 # Include support for xyzModem downloads
4622 # doc: ref/download-command.html
4624 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4626 # No user value, uncomment the following line to provide one.
4628 # value_source default
4632 # Allow the load-command write into Flash.
4633 # Write images direct to Flash via the load command.
4634 # We assume anything which is invalid RAM is flash, hence
4635 # the requires statement
4637 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4638 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4639 # CYGPKG_REDBOOT_FLASH == 1
4643 # No user value, uncomment the following line to provide one.
4645 # value_source default
4647 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4648 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4652 # Include MS Windows CE support
4653 # doc: ref/wince.html
4654 # This option enables MS Windows CE EShell support
4655 # and Windows CE .BIN images support
4657 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4664 # Include support for MXC USB downloads
4666 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4668 # No user value, uncomment the following line to provide one.
4670 # value_source default
4674 # Include support for i.MX USB OTG downloads
4676 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4678 # No user value, uncomment the following line to provide one.
4680 # value_source default
4684 # Include POSIX checksum command
4685 # doc: ref/cksum-command.html
4687 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4689 # No user value, uncomment the following line to provide one.
4691 # value_source default
4695 # Include memory fill command
4696 # doc: ref/mfill-command.html
4698 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4700 # No user value, uncomment the following line to provide one.
4702 # value_source default
4706 # Include memory compare command
4707 # doc: ref/mcmp-command.html
4709 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4711 # No user value, uncomment the following line to provide one.
4713 # value_source default
4717 # Include memory copy command
4718 # doc: ref/mcopy-command.html
4720 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4722 # No user value, uncomment the following line to provide one.
4724 # value_source default
4728 # Include memory dump command
4729 # doc: ref/dump-command.html
4731 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4733 # No user value, uncomment the following line to provide one.
4735 # value_source default
4739 # Include cache command
4740 # doc: ref/cache-command.html
4742 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4744 # No user value, uncomment the following line to provide one.
4746 # value_source default
4750 # Include exec command
4751 # doc: ref/exec-command.html
4753 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4755 # No user value, uncomment the following line to provide one.
4757 # value_source default
4760 # The following properties are affected by this value
4761 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4762 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4765 # Include I/O Memory commands 'iopeek' and 'iopoke'
4767 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4769 # No user value, uncomment the following line to provide one.
4771 # value_source default
4775 # Granularity of timer/ticks
4776 # This option controls the granularity of the timers.
4777 # Faster CPUs can afford higher granularity (lower values)
4778 # which should give higher network performance since the stack
4781 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4783 # No user value, uncomment the following line to provide one.
4785 # value_source default
4786 # Default value: 250
4787 # Legal values: 10 25 50 100 250 500 1000
4790 # Redboot Networking
4791 # This option includes networking support in RedBoot.
4793 cdl_component CYGPKG_REDBOOT_NETWORKING {
4794 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4795 # CYGPKG_IO_ETH_DRIVERS == current
4799 # No user value, uncomment the following line to provide one.
4801 # value_source default
4804 # The following properties are affected by this value
4805 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4806 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4810 # Print net debug information
4811 # This option is overriden by the configuration stored
4814 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4816 # No user value, uncomment the following line to provide one.
4818 # value_source default
4822 # Support TFTP for download
4823 # This option enables the use of the TFTP protocol for
4826 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4828 # No user value, uncomment the following line to provide one.
4830 # value_source default
4834 # Support HTTP for download
4835 # This option enables the use of the HTTP protocol for
4838 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4845 # Default IP address
4846 # This IP address is the default used by RedBoot if
4847 # a BOOTP/DHCP server does not respond. The numbers
4848 # should be separated by *commas*, and not dots. If
4849 # an IP address is configured into the Flash
4850 # configuration, that will be used in preference.
4852 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4854 # No user value, uncomment the following line to provide one.
4856 # value_source default
4857 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4858 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4863 # Do not try to use BOOTP
4864 # By default Redboot tries to use BOOTP to get an IP
4865 # address. If there's no BOOTP server on your network
4866 # use this option to avoid to wait until the
4867 # timeout. This option is overriden by the
4868 # configuration stored in flash.
4870 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4871 # This option is not active
4872 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4875 # No user value, uncomment the following line to provide one.
4877 # value_source default
4881 # Default bootp server
4882 # This IP address is the default server
4883 # address used by RedBoot if a BOOTP/DHCP
4884 # server does not respond. The numbers should
4885 # be separated by *commas*, and not dots. If
4886 # an IP address is configured into the Flash
4887 # configuration, that will be used in
4890 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4891 # This option is not active
4892 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4895 # No user value, uncomment the following line to provide one.
4897 # value_source default
4898 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4899 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4904 # Use DHCP to get IP information
4905 # Use DHCP protocol to obtain pertinent IP addresses, such
4906 # as the client, server, gateway, etc.
4908 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4910 # No user value, uncomment the following line to provide one.
4912 # value_source default
4915 # The following properties are affected by this value
4916 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4917 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4920 # Use a gateway for non-local IP traffic
4921 # Enabling this option will allow the RedBoot networking
4922 # stack to use a [single] gateway to reach a non-local
4923 # IP address. If disabled, RedBoot will only be able to
4924 # reach nodes on the same subnet.
4926 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4928 # No user value, uncomment the following line to provide one.
4930 # value_source default
4932 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4933 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4938 # Default gateway IP address
4939 # This IP address is the default used by RedBoot
4940 # if a BOOTP/DHCP server does not respond. The
4941 # numbers should be separated by *commas*, and
4942 # not dots. If an IP address is configured into
4943 # the Flash configuration, that will be used in
4946 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4948 # No user value, uncomment the following line to provide one.
4950 # value_source default
4951 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4952 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4956 # Default IP address mask
4957 # This IP address mask is the default used by
4958 # RedBoot if a BOOTP/DHCP server does not
4959 # respond. The numbers should be separated by
4960 # *commas*, and not dots. If an IP address is
4961 # configured into the Flash configuration, that
4962 # will be used in preference.
4964 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4966 # No user value, uncomment the following line to provide one.
4968 # value_source default
4969 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4970 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4975 # TCP port to listen for incoming connections
4976 # RedBoot will 'listen' on this port for incoming TCP
4977 # connections. This allows outside connections to be made
4978 # to the platform, either for GDB or RedBoot commands.
4980 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
4982 # No user value, uncomment the following line to provide one.
4984 # value_source default
4985 # Default value: 9000
4988 # Number of [network] packet buffers
4989 # RedBoot may need to buffer network data to support
4990 # various connections. This option allows control
4991 # over the number of such buffered packets, and in
4992 # turn, controls the amount of memory used by RedBoot
4993 # (which is not available to user applications).
4994 # Each packet buffer takes up about 1514 bytes.
4995 # Note: there is little need to make this larger than
4998 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5000 # No user value, uncomment the following line to provide one.
5002 # value_source default
5004 # Legal values: 3 to 8
5008 # When this option is enabled, RedBoot will be built with
5009 # support for DNS, allowing use of hostnames on the command
5012 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5013 # This option is not active
5014 # ActiveIf constraint: CYGPKG_NS_DNS
5015 # CYGPKG_NS_DNS (unknown) == 0
5019 # No user value, uncomment the following line to provide one.
5021 # value_source default
5023 # Requires: !CYGPKG_NS_DNS_BUILD
5024 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5030 # This option sets the IP of the default DNS. The IP can be
5031 # changed at runtime as well.
5033 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5034 # This option is not active
5035 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5036 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5037 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5041 # No user value, uncomment the following line to provide one.
5042 # user_value 0.0.0.0
5043 # value_source default
5044 # Default value: 0.0.0.0
5047 # Timeout in DNS lookup
5048 # This option sets the timeout used when looking up an
5049 # address via the DNS. Default is 10 seconds.
5051 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5052 # This option is not active
5053 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5056 # No user value, uncomment the following line to provide one.
5058 # value_source default
5062 # Support the use of a domain name
5063 # This option controls if Redboot supports domain
5064 # names when performing DNS lookups
5066 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5067 # This option is not active
5068 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5071 # No user value, uncomment the following line to provide one.
5073 # value_source default
5078 # Default DNS domain
5079 # This option sets the default DNS domain name.
5080 # This value will be overwritten by the value in
5081 # flash or a domain returned by DHCP
5083 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5084 # This option is not active
5085 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5086 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5089 # No user value, uncomment the following line to provide one.
5091 # value_source default
5092 # Default value: 0 0
5095 # Get DNS domain from Flash
5096 # This option enables getting the domain name
5097 # from the flash configuration. This can later be
5098 # overwritten by a value learnt from DHCP
5100 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5101 # This option is not active
5102 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5103 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5104 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5105 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5109 # No user value, uncomment the following line to provide one.
5111 # value_source default
5115 # Use DNS domain from DHCP
5116 # This option enables the use of the domain name
5119 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5120 # This option is not active
5121 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5122 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5125 # No user value, uncomment the following line to provide one.
5127 # value_source default
5131 # BOOTP/DHCP DNS domain buffer size
5132 # This options sets the size of the static
5133 # buffer used by BOOTP/DHCP to store the DNS
5134 # domain name. The domain name will not be
5135 # set if the buffer is too small to hold it.
5137 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5138 # This option is not active
5139 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5140 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5143 # No user value, uncomment the following line to provide one.
5145 # value_source default
5151 # Default network device driver
5152 # This is the name of the default network device to use.
5154 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5155 # This option is not active
5156 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5157 # CYGHWR_NET_DRIVERS == 1
5161 # No user value, uncomment the following line to provide one.
5163 # value_source default
5164 # Default value: "\"\""
5167 # Initialize only one net device
5168 # This option tells RedBoot to stop initializing network
5169 # devices when it finds the first device which is
5170 # successfully initialized. The default behavior causes
5171 # all network devices to be initialized.
5173 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5174 # This option is not active
5175 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5176 # CYGHWR_NET_DRIVERS == 1
5180 # No user value, uncomment the following line to provide one.
5182 # value_source default
5187 # Let RedBoot use any I/O channel for its console.
5188 # If this option is enabled then RedBoot will attempt to use all
5189 # defined serial I/O channels for its console device. Once input
5190 # arrives at one of these channels then the console will use only
5193 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5195 # No user value, uncomment the following line to provide one.
5197 # The inferred value should not be edited directly.
5199 # value_source inferred
5203 # Let RedBoot adjust the baud rate of the serial console.
5204 # If this option is enabled then RedBoot will support commands
5205 # to set and query the baud rate on the selected console.
5207 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5208 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5209 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5213 # No user value, uncomment the following line to provide one.
5215 # value_source default
5219 # Run a platform specific startup function.
5220 # If this option is enabled then RedBoot will execute a platform
5221 # specific startup function before entering into its command line
5222 # processing. This allows the platform to perform any special
5223 # setups before RedBoot actually starts running. Note: the entire
5224 # RedBoot environment will already be initialized at this point.
5226 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5228 # No user value, uncomment the following line to provide one.
5230 # value_source default
5234 # Run a platform specific ESA validation function.
5235 # If this option is enabled then RedBoot will execute a platform
5236 # specific function to validate an ethernet ESA. This would be
5237 # useful if the address must conform to standards set by the
5238 # hardware manufacturer, etc.
5240 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5242 # No user value, uncomment the following line to provide one.
5244 # The inferred value should not be edited directly.
5246 # value_source inferred
5249 # The following properties are affected by this value
5250 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5251 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5252 # option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI
5253 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5256 # Maximum command line length
5257 # This option allows control over how long the CLI command line
5258 # should be. This space will be allocated statically
5259 # rather than from RedBoot's stack.
5261 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5263 # No user value, uncomment the following line to provide one.
5265 # The inferred value should not be edited directly.
5267 # value_source inferred
5268 # Default value: 256
5271 # Command processing idle timeout (ms)
5272 # This option controls the timeout period before the
5273 # command processing is considered 'idle'. Making this
5274 # number smaller will cause idle processing to take place
5275 # more often, etc. The default value of 10ms is a reasonable
5276 # tradeoff between responsiveness and overhead.
5278 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5280 # No user value, uncomment the following line to provide one.
5282 # value_source default
5286 # Validate RAM addresses during load
5287 # This option controls whether or not RedBoot will make
5288 # sure that memory being used by the "load" command is
5289 # in fact in user RAM. Leaving the option enabled makes
5290 # for a safer environment, but this check may not be valid
5291 # on all platforms, thus the ability to disable it.
5292 # ** Disable this only with great care **
5294 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5296 # No user value, uncomment the following line to provide one.
5298 # value_source default
5301 # The following properties are affected by this value
5302 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5303 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5306 # Allow RedBoot to support FLASH programming
5307 # If this option is enabled then RedBoot will provide commands
5308 # to manage images in FLASH memory. These images can be loaded
5309 # into memory for execution or executed in place.
5311 cdl_component CYGPKG_REDBOOT_FLASH {
5312 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5313 # CYGHWR_IO_FLASH_DEVICE == 1
5317 # No user value, uncomment the following line to provide one.
5319 # value_source default
5322 # The following properties are affected by this value
5323 # option CYGPRI_REDBOOT_ZLIB_FLASH
5324 # ActiveIf: CYGPKG_REDBOOT_FLASH
5325 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5326 # ActiveIf: CYGPKG_REDBOOT_FLASH
5330 # Byte order used to store info in flash.
5331 # This option controls the byte ordering used to store
5332 # the FIS directory info and flash config info.
5334 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5336 # No user value, uncomment the following line to provide one.
5337 # user_value NATURAL
5338 # value_source default
5339 # Default value: NATURAL
5340 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5343 # RedBoot Flash Image System support
5344 # doc: ref/flash-image-system.html
5345 # This option enables the Flash Image System commands
5346 # and support within RedBoot. If disabled, simple Flash
5347 # access commands such as "fis write" will still exist.
5348 # This option would be disabled for targets that need simple
5349 # FLASH manipulation, but do not have the need or space for
5350 # complete image management.
5352 cdl_option CYGOPT_REDBOOT_FIS {
5354 # No user value, uncomment the following line to provide one.
5356 # value_source default
5359 # The following properties are affected by this value
5360 # component CYGPKG_REDBOOT_FIS_CONTENTS
5361 # ActiveIf: CYGOPT_REDBOOT_FIS
5362 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5363 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5364 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5365 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5368 # Max number of chunks of free space to manage
5369 # If this option is defined then "fis free" will
5370 # rely on the FIS directory to determine what space is
5371 # free within the FLASH. This option controls the
5372 # maximum number of free segment which can be handled
5373 # (typically this number is small). If this option is
5374 # not enabled, the the archaic behaviour of actually
5375 # scanning the FLASH for erased sectors (unreliable)
5376 # will be used to determine what's free and what's
5379 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5381 # No user value, uncomment the following line to provide one.
5383 # value_source default
5384 # Default value: 1 32
5387 # Flash Image System default directory contents
5389 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5390 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5391 # CYGOPT_REDBOOT_FIS == 1
5394 # Calculated value: 1
5400 # Flash block containing the Directory
5401 # Which block of flash should hold the directory
5402 # information. Positive numbers are absolute block
5403 # numbers. Negative block numbers count backwards
5404 # from the last block. eg 2 means block 2, -2
5405 # means the last but one block.
5407 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5409 # No user value, uncomment the following line to provide one.
5411 # value_source default
5414 # The following properties are affected by this value
5415 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5416 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5417 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5420 # Redundant Flash Image System Directory Support
5421 # This option enables the use of a redundant FIS
5422 # directory within RedBoot. If enabled a flash block
5423 # will be reserved for a second copy of the fis
5424 # directory. Doing this allow for power failure safe
5425 # updates of the directory by the application.
5427 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5429 # No user value, uncomment the following line to provide one.
5431 # value_source default
5433 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5434 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5439 # Flash block containing the backup Directory
5440 # Which block of flash should hold the redundant
5441 # directory information. Positive numbers are
5442 # absolute block numbers. Negative block numbers
5443 # count backwards from the last block. eg 2 means
5444 # block 2, -2 means the last but one block.
5446 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5447 # This option is not active
5448 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5451 # No user value, uncomment the following line to provide one.
5453 # value_source default
5455 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5456 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5457 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5458 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5461 # The following properties are affected by this value
5462 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5463 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5464 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5468 # Pseudo-file to describe reserved area
5469 # If an area of FLASH is reserved, it is informative to
5470 # have a fis entry describing it. This option controls
5471 # creation of such an entry by default in the fis init
5474 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5475 # This option is not active
5476 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5477 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5481 # No user value, uncomment the following line to provide one.
5483 # value_source default
5487 # File to describe RedBoot boot image
5488 # Normally a ROM-startup RedBoot image is first in the
5489 # FLASH, and the system boots using that image. This
5490 # option controls creation of an entry describing it in
5491 # the fis init command. It might be disabled if a
5492 # platform has an immutable boot image of its own, where
5493 # we use a POST-startup RedBoot instead, which performs
5494 # less board initialization.
5496 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5498 # No user value, uncomment the following line to provide one.
5500 # value_source default
5503 # The following properties are affected by this value
5504 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5505 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5506 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5507 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5510 # File to describe RedBoot POST-compatible image
5511 # This option controls creation of an entry describing a
5512 # POST-startup RedBoot image in the fis init command.
5513 # Not all platforms support POST-startup. A platform
5514 # might have both for testing purposes, where the
5515 # eventual user would substitute their own POST code for
5516 # the initial ROM-startup RedBoot, and then jump to the
5517 # POST-compatible RedBoot immediately following.
5519 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5521 # No user value, uncomment the following line to provide one.
5523 # value_source default
5524 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5525 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5530 # Offset of POST image from FLASH start
5531 # This option specifies the offset for a POST image from
5532 # the start of FLASH. If unset, then the fis entry
5533 # describing the POST image will be placed where
5536 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5537 # This option is not active
5538 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5541 # No user value, uncomment the following line to provide one.
5543 # value_source default
5544 # Default value: 0 0
5545 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5546 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5547 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5550 # The following properties are affected by this value
5551 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5552 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5556 # File to describe RedBoot backup image
5557 # This option controls creation of an entry describing a
5558 # backup RedBoot image in the fis init command.
5559 # Conventionally a RAM-startup RedBoot image is kept
5560 # under this name for use in updating the ROM-based
5561 # RedBoot that boots the board.
5563 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5565 # No user value, uncomment the following line to provide one.
5567 # value_source default
5571 # Include ARM SIB ID in FIS
5572 # If set, this option will cause the last 5 words of
5573 # the FIS to include the special ID needed for the
5574 # flash to be recognized as a reserved area for RedBoot
5575 # by an ARM BootRom monitor.
5577 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5579 # No user value, uncomment the following line to provide one.
5581 # value_source default
5585 # Size of FIS directory entry
5586 # The FIS directory is limited to one single flash
5587 # sector. If your flash has tiny sectors, you may wish
5588 # to reduce this value in order to get more slots in
5589 # the FIS directory.
5591 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5593 # No user value, uncomment the following line to provide one.
5595 # value_source default
5596 # Default value: 256
5599 # Number of FIS directory entries
5600 # The FIS directory normally occupies a single flash
5601 # sector. Adjusting this value can allow for more than
5602 # one flash sector to be used, which is useful if your
5603 # sectors are very small.
5605 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5607 # No user value, uncomment the following line to provide one.
5609 # value_source default
5613 # Maximum RedBoot image size
5614 # This option controls the maximum length reserved
5615 # for the RedBoot boot image in the FIS table.
5616 # This should be a multiple of the flash's erase
5619 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5621 # No user value, uncomment the following line to provide one.
5622 # user_value 0x00020000
5623 # The inferred value should not be edited directly.
5624 inferred_value 0x00040000
5625 # value_source inferred
5626 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5627 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5631 # Offset from start of FLASH to RedBoot boot image
5632 # This option controls where the RedBoot boot image is
5633 # located relative to the start of FLASH.
5635 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5637 # No user value, uncomment the following line to provide one.
5639 # value_source default
5640 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5641 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5643 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5644 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5645 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5648 # The following properties are affected by this value
5649 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5650 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5651 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5652 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5653 # component CYGPKG_HAL_ARM_TX27_OPTIONS
5654 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5657 # Size of reserved area at start of FLASH
5658 # This option reserves an area at the start of
5659 # FLASH where RedBoot will never interfere; it is
5660 # expected that this area contains
5661 # (non-RedBoot-based) POST code or some other boot
5662 # monitor that executes before RedBoot.
5664 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5666 # No user value, uncomment the following line to provide one.
5668 # value_source default
5671 # The following properties are affected by this value
5672 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5673 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5674 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5675 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5676 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5677 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5681 # Keep all RedBoot FLASH data blocks locked.
5682 # When this option is enabled, RedBoot will keep configuration
5683 # data and the FIS directory blocks implicitly locked. While
5684 # this is somewhat safer, it does add overhead during updates.
5686 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5687 # This option is not active
5688 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5689 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5693 # No user value, uncomment the following line to provide one.
5695 # value_source default
5699 # Use CRC checksums on FIS images.
5700 # When this option is enabled, RedBoot will use CRC checksums
5701 # when reading and writing flash images.
5703 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5705 # No user value, uncomment the following line to provide one.
5707 # value_source default
5711 # ARM FLASH drivers support SIB flash block structure
5712 # This interface is implemented by a flash driver
5713 # to indicate that it supports the ARM SIB flash
5716 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5717 # No options implement this inferface
5718 # ActiveIf constraint: CYGPKG_HAL_ARM
5719 # CYGPKG_HAL_ARM == current
5722 # This value cannot be modified here.
5726 # The following properties are affected by this value
5727 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5728 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5731 # Use ARM SIB flash block structure
5732 # This option is used to interpret ARM Flash System
5733 # information blocks.
5735 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5736 # This option is not active
5737 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5738 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5742 # No user value, uncomment the following line to provide one.
5744 # value_source default
5749 # Keep RedBoot configuration data in FLASH
5750 # When this option is enabled, RedBoot will keep configuration
5751 # data in a separate block of FLASH memory. This data will
5752 # include such items as the node IP address or startup scripts.
5754 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5756 # No user value, uncomment the following line to provide one.
5758 # value_source default
5759 # Default value: CYGPKG_IO_FLASH != 0
5760 # CYGPKG_IO_FLASH == current
5763 # The following properties are affected by this value
5764 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5765 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5766 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5767 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5768 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5769 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5770 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5771 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5772 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5773 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5774 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5775 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5776 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5777 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5781 # Length of configuration data in FLASH
5782 # This option is used to control the amount of memory and FLASH
5783 # to be used for configuration options (persistent storage).
5785 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5787 # No user value, uncomment the following line to provide one.
5789 # value_source default
5790 # Default value: 4096
5793 # Style of media used for persistent data storage
5794 # Persistent data storage can either be held in 'norma' FLASH
5795 # or some other device (represented by the 'EEPROM' choice).
5796 # The different styles utilize different access methods.
5798 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5800 # No user value, uncomment the following line to provide one.
5802 # value_source default
5803 # Default value: FLASH
5804 # Legal values: "FLASH" "EEPROM"
5806 # The following properties are affected by this value
5807 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5808 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5809 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5810 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5813 # Merged config data and FIS directory
5814 # If this option is set, then the FIS directory and FLASH
5815 # configuration database will be stored in the same physical
5818 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5819 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5820 # CYGOPT_REDBOOT_FIS == 1
5821 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5825 # No user value, uncomment the following line to provide one.
5827 # value_source default
5830 # The following properties are affected by this value
5831 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5832 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5835 # Which block of flash to use
5836 # Which block of flash should hold the configuration
5837 # information. Positive numbers are absolute block numbers.
5838 # Negative block numbers count backwards from the last block.
5839 # eg 2 means block 2, -2 means the last but one block.
5841 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5843 # No user value, uncomment the following line to provide one.
5845 # value_source default
5849 # Support simple macros/aliases in FLASH
5850 # This option is used to allow support for simple text-based
5851 # macros (aliases). These aliases are kept in the FLASH
5852 # configuration data (persistent storage).
5854 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5856 # No user value, uncomment the following line to provide one.
5858 # value_source default
5862 # Length of strings in FLASH configuration data
5863 # This option is used to control the amount of memory
5864 # and FLASH to be used for string configuration
5865 # options (persistent storage).
5867 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5869 # No user value, uncomment the following line to provide one.
5871 # value_source default
5872 # Default value: 128
5875 # Length of configuration script(s) in FLASH
5876 # This option is used to control the amount of memory and
5877 # FLASH to be used for configuration options (persistent
5880 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5882 # No user value, uncomment the following line to provide one.
5884 # The inferred value should not be edited directly.
5886 # value_source inferred
5887 # Default value: 512
5890 # Fallback to read-only FLASH configuration
5891 # This option will cause the configuration information to
5892 # revert to the readonly information stored in the FLASH.
5893 # The option only takes effect after
5894 # 1) the config_ok flag has been set to be true,
5895 # indicating that at one time the copy in RAM was valid;
5897 # 2) the information in RAM has been verified to be invalid
5899 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5901 # No user value, uncomment the following line to provide one.
5903 # value_source default
5904 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5905 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5910 # Allow RedBoot to support fileio
5911 # If this option is enabled then RedBoot will provide commands
5912 # to load files from fileio file systems such as JFFS2.
5914 cdl_component CYGPKG_REDBOOT_FILEIO {
5915 # This option is not active
5916 # ActiveIf constraint: CYGPKG_IO_FILEIO
5917 # CYGPKG_IO_FILEIO (unknown) == 0
5921 # No user value, uncomment the following line to provide one.
5923 # value_source default
5926 # The following properties are affected by this value
5927 # option CYGNUM_REDBOOT_GETC_BUFFER
5928 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5932 # Include an ls command
5933 # If this option is enabled a simple ls command will be
5934 # included in redboot so the contents of a directory
5937 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5938 # This option is not active
5939 # The parent CYGPKG_REDBOOT_FILEIO is not active
5942 # No user value, uncomment the following line to provide one.
5944 # value_source default
5949 # Allow RedBoot to support disks
5950 # If this option is enabled then RedBoot will provide commands
5951 # to load disk files.
5953 cdl_component CYGPKG_REDBOOT_DISK {
5961 # Include Redboot commands for disk access
5963 cdl_option CYGSEM_REDBOOT_DISK {
5964 # This option is not active
5965 # The parent CYGPKG_REDBOOT_DISK is disabled
5968 # No user value, uncomment the following line to provide one.
5970 # value_source default
5971 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
5972 # CYGINT_REDBOOT_DISK_DRIVERS == 0
5976 # Hardware drivers for disk-type devices
5978 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
5979 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
5980 # This option is not active
5981 # The parent CYGPKG_REDBOOT_DISK is disabled
5983 # This value cannot be modified here.
5987 # The following properties are affected by this value
5988 # option CYGSEM_REDBOOT_DISK
5989 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
5992 # Maximum number of supported disks
5993 # This option controls the number of disks supported by
5996 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
5997 # This option is not active
5998 # The parent CYGPKG_REDBOOT_DISK is disabled
6001 # No user value, uncomment the following line to provide one.
6003 # value_source default
6007 # Maximum number of partitions per disk
6008 # This option controls the maximum number of supported
6009 # partitions per disk.
6011 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6012 # This option is not active
6013 # The parent CYGPKG_REDBOOT_DISK is disabled
6016 # No user value, uncomment the following line to provide one.
6018 # value_source default
6022 # Support IDE disks.
6023 # When this option is enabled, RedBoot will support IDE disks.
6025 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6026 # This option is not active
6027 # The parent CYGPKG_REDBOOT_DISK is disabled
6028 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6029 # CYGINT_HAL_PLF_IF_IDE == 0
6033 # No user value, uncomment the following line to provide one.
6035 # value_source default
6040 # Work with VMware virtual disks
6041 # This option controls the disk driver behavior at
6044 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6045 # This option is not active
6046 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6049 # No user value, uncomment the following line to provide one.
6051 # value_source default
6056 # Support Linux second extended filesystems.
6057 # When this option is enabled, RedBoot will support EXT2
6060 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6061 # This option is not active
6062 # The parent CYGPKG_REDBOOT_DISK is disabled
6065 # No user value, uncomment the following line to provide one.
6067 # value_source default
6071 # Support ISO9660 filesystems.
6072 # When this option is enabled, RedBoot will support ISO9660
6075 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6076 # This option is not active
6077 # The parent CYGPKG_REDBOOT_DISK is disabled
6079 # Calculated value: 0
6086 # doc: ref/persistent-state-flash.html
6087 # This contains options related to RedBoot's boot script
6090 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6091 # There is no associated value.
6095 # Boot scripting enabled
6096 # This option controls whether RedBoot boot script
6097 # functionality is enabled.
6099 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6100 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6101 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6102 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6105 # Calculated value: 1
6110 # Use default RedBoot boot script
6111 # If enabled, this option will tell RedBoot to use the
6112 # value of this option as a default boot script.
6114 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6116 # No user value, uncomment the following line to provide one.
6118 # The inferred value should not be edited directly.
6120 # value_source inferred
6121 # Default value: 0 0
6123 # The following properties are affected by this value
6124 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6125 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6128 # Resolution (in ms) for script timeout value.
6129 # This option controls the resolution of the script
6130 # timeout. The value is specified in milliseconds
6131 # (ms), thus to have the script timeout be defined in
6132 # terms of tenths of seconds, use 100.
6134 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6136 # No user value, uncomment the following line to provide one.
6138 # The inferred value should not be edited directly.
6140 # value_source inferred
6141 # Default value: 1000
6144 # Script default timeout value
6145 # This option is used to set the default timeout for startup
6146 # scripts, when they are enabled.
6148 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6150 # No user value, uncomment the following line to provide one.
6152 # The inferred value should not be edited directly.
6154 # value_source inferred
6159 # Support RTC for time & date functions
6160 # When this option is enabled, RedBoot will support commands to
6161 # query and set the real time clock (time and date)
6163 cdl_option CYGSEM_REDBOOT_RTC {
6164 # This option is not active
6165 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6166 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6170 # No user value, uncomment the following line to provide one.
6172 # value_source default
6176 # Behave like a ROM monitor
6177 # Enabling this option will allow RedBoot to provide ROM
6178 # monitor-style services to programs which it executes.
6180 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6181 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6182 # CYG_HAL_STARTUP == ROMRAM
6183 # CYG_HAL_STARTUP == ROMRAM
6186 # Calculated value: 1
6189 # Requires: CYGSEM_HAL_ROM_MONITOR
6190 # CYGSEM_HAL_ROM_MONITOR == 1
6194 # Allow RedBoot to handle GNUPro application 'syscalls'.
6195 # If this option is enabled then RedBoot will install a
6196 # syscall handler to support debugging of applications
6197 # based on GNUPro newlib/bsp.
6199 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6201 # No user value, uncomment the following line to provide one.
6203 # value_source default
6206 # The following properties are affected by this value
6207 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6208 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6209 # option CYGPKG_HAL_GDB_FILEIO
6210 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6214 # Support additional syscalls for 'gprof' profiling
6215 # Support additional syscalls to support a periodic callback
6216 # function for histogram-style profiling, and an enquire/set
6218 # The application must use the GNUPro newlib facilities
6221 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6222 # This option is not active
6223 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6224 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6225 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6229 # No user value, uncomment the following line to provide one.
6231 # value_source default
6235 # Does the HAL support 'gprof' profiling?
6237 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6238 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6239 # This option is not active
6240 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6242 # This value cannot be modified here.
6246 # The following properties are affected by this value
6247 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6248 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6251 # Do not raise SIGTRAP when program exits
6252 # For some (single shot) newlib based programs,
6253 # exiting and returning a termination status may be
6254 # the normal expected behavior.
6256 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6257 # This option is not active
6258 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6261 # No user value, uncomment the following line to provide one.
6263 # value_source default
6268 # Use a common buffer for Zlib and FIS
6269 # Use a common memory buffer for both the zlib workspace
6270 # and FIS directory operations. This can save a substantial
6271 # amount of RAM, especially when flash sectors are large.
6273 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6274 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6275 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6276 # CYGOPT_REDBOOT_FIS == 1
6280 # No user value, uncomment the following line to provide one.
6282 # value_source default
6287 # Size of Zlib/FIS common buffer
6288 # Size of common buffer to allocate. Must be at least the
6289 # size of one flash sector.
6291 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6292 # This option is not active
6293 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6296 # No user value, uncomment the following line to provide one.
6297 # user_value 0x0000C000
6298 # value_source default
6299 # Default value: 0x0000C000
6300 # Legal values: 0x4000 to 0x80000000
6304 # Buffer size in getc when loading images
6305 # When loading images a buffer is used between redboot and the
6306 # underlying storage medium, eg a filesystem, or a socket etc.
6307 # The size of this buffer can have a big impart on load speed.
6309 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6311 # No user value, uncomment the following line to provide one.
6313 # value_source default
6314 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6315 # CYGPKG_REDBOOT_FILEIO == 0
6320 # Redboot for ARM options
6321 # This option lists the target's requirements for a valid Redboot
6324 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6325 # ActiveIf constraint: CYGPKG_REDBOOT
6326 # CYGPKG_REDBOOT == current
6329 # There is no associated value.
6331 # The following properties are affected by this value
6335 # Provide the exec command in RedBoot
6336 # This option contains requirements for booting linux
6337 # from RedBoot. The component is enabled/disabled from
6340 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6341 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6342 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6345 # There is no associated value.
6349 # Enable -x switch for exec command.
6350 # This option allows bi-endian platforms to launch kernels
6351 # built for an endianess different than the RedBoot endianess
6353 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6355 # No user value, uncomment the following line to provide one.
6357 # value_source default
6361 # Physical base address of linux kernel
6362 # This is the physical address of the base of the
6363 # Linux kernel image.
6365 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6367 # No user value, uncomment the following line to provide one.
6368 # user_value 0xA0108000
6369 # value_source default
6370 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6371 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6375 # Default physical base address of linux kernel
6376 # This is the physical address of the base of the
6377 # Linux kernel image. This option gets set by the
6380 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6382 # No user value, uncomment the following line to provide one.
6383 # user_value 0x00008000
6384 # The inferred value should not be edited directly.
6385 inferred_value 0xA0108000
6386 # value_source inferred
6387 # Default value: 0x00008000
6389 # The following properties are affected by this value
6390 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6391 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6392 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
6393 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6396 # Base address of linux kernel parameter tags
6397 # This is the base address of the area of memory used to
6398 # pass parameters to the Linux kernel. This should be chosen
6399 # to avoid overlap with the kernel and any ramdisk image.
6401 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6403 # No user value, uncomment the following line to provide one.
6404 # user_value 0x00000100
6405 # value_source default
6406 # Default value: 0x00000100
6411 # Redboot HAL options
6412 # This option lists the target's requirements for a valid Redboot
6415 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6416 # ActiveIf constraint: CYGPKG_REDBOOT
6417 # CYGPKG_REDBOOT == current
6420 # There is no associated value.
6424 # Build Redboot ROM binary image
6425 # This option enables the conversion of the Redboot ELF
6426 # image to a binary image suitable for ROM programming.
6428 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6429 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6430 # CYGBLD_BUILD_REDBOOT == 1
6434 # No user value, uncomment the following line to provide one.
6436 # value_source default
6441 # Redboot HAL variant options
6443 cdl_component CYGPKG_REDBOOT_HAL_TX27_OPTIONS {
6444 # ActiveIf constraint: CYGPKG_REDBOOT
6445 # CYGPKG_REDBOOT == current
6448 # There is no associated value.
6449 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6450 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6455 # ISO C and POSIX infrastructure
6456 # eCos supports implementations of ISO C libraries and POSIX
6457 # implementations. This package provides infrastructure used by
6458 # all such implementations.
6460 cdl_package CYGPKG_ISOINFRA {
6461 # Packages cannot be added or removed, nor can their version be changed,
6462 # simply by editing their value. Instead the appropriate configuration
6463 # should be used to perform these actions.
6465 # This value cannot be modified here.
6467 # Current value: 1 current
6469 # The following properties are affected by this value
6470 # component CYGBLD_BUILD_REDBOOT
6471 # Requires: CYGPKG_ISOINFRA
6472 # package CYGPKG_LIBC_STRING
6473 # Requires: CYGPKG_ISOINFRA
6474 # package CYGPKG_COMPRESS_ZLIB
6475 # Requires: CYGPKG_ISOINFRA
6476 # package CYGPKG_IO_FLASH
6477 # Requires: CYGPKG_ISOINFRA
6478 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6479 # Requires: CYGPKG_ISOINFRA
6480 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6481 # DefaultValue: 0 != CYGPKG_ISOINFRA
6482 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6483 # ActiveIf: CYGPKG_ISOINFRA
6484 # package CYGPKG_LIBC_I18N
6485 # Requires: CYGPKG_ISOINFRA
6486 # package CYGPKG_LIBC_STDLIB
6487 # Requires: CYGPKG_ISOINFRA
6491 # Startup and termination
6493 cdl_component CYGPKG_ISO_STARTUP {
6494 # There is no associated value.
6498 # main() startup implementations
6499 # Implementations of this interface arrange for a user-supplied
6500 # main() to be called in an ISO compatible environment.
6502 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6503 # No options implement this inferface
6504 # This value cannot be modified here.
6507 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6508 # CYGINT_ISO_MAIN_STARTUP == 0
6511 # The following properties are affected by this value
6512 # interface CYGINT_ISO_MAIN_STARTUP
6513 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6516 # environ implementations
6517 # Implementations of this interface provide the environ
6518 # variable required by POSIX.
6520 cdl_interface CYGINT_ISO_ENVIRON {
6521 # No options implement this inferface
6522 # This value cannot be modified here.
6525 # Requires: 1 >= CYGINT_ISO_ENVIRON
6526 # CYGINT_ISO_ENVIRON == 0
6529 # The following properties are affected by this value
6530 # interface CYGINT_ISO_ENVIRON
6531 # Requires: 1 >= CYGINT_ISO_ENVIRON
6537 cdl_component CYGPKG_ISO_CTYPE_H {
6538 # There is no associated value.
6542 # Number of implementations of ctype functions
6544 cdl_interface CYGINT_ISO_CTYPE {
6545 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6546 # This value cannot be modified here.
6549 # Requires: 1 >= CYGINT_ISO_CTYPE
6550 # CYGINT_ISO_CTYPE == 1
6553 # The following properties are affected by this value
6554 # interface CYGINT_ISO_CTYPE
6555 # Requires: 1 >= CYGINT_ISO_CTYPE
6556 # package CYGPKG_HAL_ARM_TX27KARO
6557 # Requires: CYGINT_ISO_CTYPE
6558 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6559 # Requires: CYGINT_ISO_CTYPE
6560 # package CYGPKG_LIBC_STDLIB
6561 # Requires: CYGINT_ISO_CTYPE
6564 # Ctype implementation header
6566 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6568 # No user value, uncomment the following line to provide one.
6570 # The inferred value should not be edited directly.
6571 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6572 # value_source inferred
6573 # Default value: 0 0
6575 # The following properties are affected by this value
6576 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6577 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6578 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6579 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6585 cdl_component CYGPKG_ISO_ERRNO {
6586 # There is no associated value.
6590 # Number of implementations of error codes
6592 cdl_interface CYGINT_ISO_ERRNO_CODES {
6593 # Implemented by CYGPKG_ERROR, active, enabled
6594 # This value cannot be modified here.
6597 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6598 # CYGINT_ISO_ERRNO_CODES == 1
6601 # The following properties are affected by this value
6602 # interface CYGINT_ISO_ERRNO_CODES
6603 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6606 # Error codes implementation header
6608 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6610 # No user value, uncomment the following line to provide one.
6612 # The inferred value should not be edited directly.
6613 inferred_value 1 <cyg/error/codes.h>
6614 # value_source inferred
6615 # Default value: 0 0
6617 # The following properties are affected by this value
6618 # package CYGPKG_ERROR
6619 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6622 # Number of implementations of errno variable
6624 cdl_interface CYGINT_ISO_ERRNO {
6625 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6626 # This value cannot be modified here.
6629 # Requires: 1 >= CYGINT_ISO_ERRNO
6630 # CYGINT_ISO_ERRNO == 1
6633 # The following properties are affected by this value
6634 # interface CYGINT_ISO_ERRNO
6635 # Requires: 1 >= CYGINT_ISO_ERRNO
6638 # errno variable implementation header
6640 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6642 # No user value, uncomment the following line to provide one.
6644 # The inferred value should not be edited directly.
6645 inferred_value 1 <cyg/error/errno.h>
6646 # value_source inferred
6647 # Default value: 0 0
6649 # The following properties are affected by this value
6650 # component CYGPKG_ERROR_ERRNO
6651 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6655 # Locale-related functions
6657 cdl_component CYGPKG_ISO_LOCALE {
6658 # There is no associated value.
6662 # Number of implementations of locale functions
6664 cdl_interface CYGINT_ISO_LOCALE {
6665 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6666 # This value cannot be modified here.
6669 # Requires: 1 >= CYGINT_ISO_LOCALE
6670 # CYGINT_ISO_LOCALE == 1
6673 # The following properties are affected by this value
6674 # interface CYGINT_ISO_LOCALE
6675 # Requires: 1 >= CYGINT_ISO_LOCALE
6678 # Locale implementation header
6680 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6682 # No user value, uncomment the following line to provide one.
6684 # value_source default
6685 # Default value: 0 0
6689 # Standard I/O-related functionality
6691 cdl_component CYGPKG_ISO_STDIO {
6692 # There is no associated value.
6696 # Number of implementations of stdio file types
6698 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6699 # No options implement this inferface
6700 # This value cannot be modified here.
6702 # Current value: 0 0
6703 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6704 # CYGINT_ISO_STDIO_FILETYPES == 0
6707 # The following properties are affected by this value
6708 # interface CYGINT_ISO_STDIO_FILETYPES
6709 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6712 # Stdio file types implementation header
6714 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6716 # No user value, uncomment the following line to provide one.
6718 # value_source default
6719 # Default value: 0 0
6722 # Stdio standard streams implementations
6724 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6725 # No options implement this inferface
6726 # This value cannot be modified here.
6728 # Current value: 0 0
6729 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6730 # CYGINT_ISO_STDIO_STREAMS == 0
6733 # The following properties are affected by this value
6734 # interface CYGINT_ISO_STDIO_STREAMS
6735 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6738 # Stdio standard streams implementation header
6739 # This header file must define stdin, stdout
6742 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6744 # No user value, uncomment the following line to provide one.
6746 # value_source default
6747 # Default value: 0 0
6750 # Number of implementations of stdio file operations
6752 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6753 # No options implement this inferface
6754 # This value cannot be modified here.
6756 # Current value: 0 0
6757 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6758 # CYGINT_ISO_STDIO_FILEOPS == 0
6761 # The following properties are affected by this value
6762 # interface CYGINT_ISO_STDIO_FILEOPS
6763 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6766 # Stdio file operations implementation header
6767 # This header controls the file system operations on a file
6768 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6771 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6773 # No user value, uncomment the following line to provide one.
6775 # value_source default
6776 # Default value: 0 0
6779 # Number of implementations of stdio file access functionals
6781 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6782 # No options implement this inferface
6783 # This value cannot be modified here.
6785 # Current value: 0 0
6786 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6787 # CYGINT_ISO_STDIO_FILEACCESS == 0
6790 # The following properties are affected by this value
6791 # interface CYGINT_ISO_STDIO_FILEACCESS
6792 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6793 # option CYGFUN_COMPRESS_ZLIB_GZIO
6794 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6797 # Stdio file access implementation header
6798 # This header controls the file access operations
6799 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6800 # setvbuf(), and associated constants.
6802 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6804 # No user value, uncomment the following line to provide one.
6806 # value_source default
6807 # Default value: 0 0
6810 # Number of implementations of stdio formatted I/O
6812 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6813 # No options implement this inferface
6814 # This value cannot be modified here.
6816 # Current value: 0 0
6817 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6818 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6821 # The following properties are affected by this value
6822 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6823 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6824 # option CYGFUN_COMPRESS_ZLIB_GZIO
6825 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6828 # Stdio formatted I/O implementation header
6830 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6832 # No user value, uncomment the following line to provide one.
6834 # value_source default
6835 # Default value: 0 0
6838 # Number of implementations of stdio character I/O
6840 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6841 # No options implement this inferface
6842 # This value cannot be modified here.
6844 # Current value: 0 0
6845 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6846 # CYGINT_ISO_STDIO_CHAR_IO == 0
6849 # The following properties are affected by this value
6850 # interface CYGINT_ISO_STDIO_CHAR_IO
6851 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6854 # Stdio character I/O implementation header
6856 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6858 # No user value, uncomment the following line to provide one.
6860 # value_source default
6861 # Default value: 0 0
6864 # Number of implementations of stdio direct I/O
6866 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6867 # No options implement this inferface
6868 # This value cannot be modified here.
6870 # Current value: 0 0
6871 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6872 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6875 # The following properties are affected by this value
6876 # interface CYGINT_ISO_STDIO_DIRECT_IO
6877 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6880 # Stdio direct I/O implementation header
6882 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6884 # No user value, uncomment the following line to provide one.
6886 # value_source default
6887 # Default value: 0 0
6890 # Number of implementations of stdio file positioning
6892 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6893 # No options implement this inferface
6894 # This value cannot be modified here.
6896 # Current value: 0 0
6897 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6898 # CYGINT_ISO_STDIO_FILEPOS == 0
6901 # The following properties are affected by this value
6902 # interface CYGINT_ISO_STDIO_FILEPOS
6903 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6904 # option CYGFUN_COMPRESS_ZLIB_GZIO
6905 # Requires: CYGINT_ISO_STDIO_FILEPOS
6908 # Stdio file positioning implementation header
6910 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6912 # No user value, uncomment the following line to provide one.
6914 # value_source default
6915 # Default value: 0 0
6918 # Number of implementations of stdio error handling
6920 cdl_interface CYGINT_ISO_STDIO_ERROR {
6921 # No options implement this inferface
6922 # This value cannot be modified here.
6924 # Current value: 0 0
6925 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6926 # CYGINT_ISO_STDIO_ERROR == 0
6929 # The following properties are affected by this value
6930 # interface CYGINT_ISO_STDIO_ERROR
6931 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6934 # Stdio error handling implementation header
6936 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6938 # No user value, uncomment the following line to provide one.
6940 # value_source default
6941 # Default value: 0 0
6944 # POSIX fd-related function implementations
6946 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6947 # No options implement this inferface
6948 # This value cannot be modified here.
6950 # Current value: 0 0
6951 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6952 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6955 # The following properties are affected by this value
6956 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6957 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6960 # POSIX fd-related function implementation header
6962 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6964 # No user value, uncomment the following line to provide one.
6966 # value_source default
6967 # Default value: 0 0
6971 # Standard general utility functions
6973 cdl_component CYGPKG_ISO_STDLIB {
6974 # There is no associated value.
6978 # String conversion function implementations
6980 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
6981 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
6982 # This value cannot be modified here.
6985 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6986 # CYGINT_ISO_STDLIB_STRCONV == 1
6989 # The following properties are affected by this value
6990 # interface CYGINT_ISO_STDLIB_STRCONV
6991 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6994 # String conversion function implementation header
6996 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
6998 # No user value, uncomment the following line to provide one.
7000 # The inferred value should not be edited directly.
7001 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7002 # value_source inferred
7003 # Default value: 0 0
7005 # The following properties are affected by this value
7006 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7007 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7010 # String to FP conversion function implementations
7012 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7013 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7014 # This value cannot be modified here.
7017 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7018 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7021 # The following properties are affected by this value
7022 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7023 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7026 # String to FP conversion function implementation header
7028 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7030 # No user value, uncomment the following line to provide one.
7032 # value_source default
7033 # Default value: 0 0
7036 # Random number generator implementations
7038 cdl_interface CYGINT_ISO_RAND {
7039 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7040 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7041 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7042 # This value cannot be modified here.
7045 # Requires: 1 >= CYGINT_ISO_RAND
7046 # CYGINT_ISO_RAND == 1
7049 # The following properties are affected by this value
7050 # interface CYGINT_ISO_RAND
7051 # Requires: 1 >= CYGINT_ISO_RAND
7054 # Random number generator implementation header
7056 cdl_option CYGBLD_ISO_RAND_HEADER {
7058 # No user value, uncomment the following line to provide one.
7060 # value_source default
7061 # Default value: 0 0
7064 # Malloc implementations
7066 cdl_interface CYGINT_ISO_MALLOC {
7067 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7068 # This value cannot be modified here.
7071 # Requires: 1 >= CYGINT_ISO_MALLOC
7072 # CYGINT_ISO_MALLOC == 1
7075 # The following properties are affected by this value
7076 # interface CYGINT_ISO_MALLOC
7077 # Requires: 1 >= CYGINT_ISO_MALLOC
7078 # option CYGFUN_LIBC_STRING_STRDUP
7079 # ActiveIf: CYGINT_ISO_MALLOC
7082 # Malloc implementation header
7084 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7086 # No user value, uncomment the following line to provide one.
7088 # value_source default
7089 # Default value: 0 0
7092 # Mallinfo() implementations
7094 cdl_interface CYGINT_ISO_MALLINFO {
7095 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7096 # This value cannot be modified here.
7099 # Requires: 1 >= CYGINT_ISO_MALLINFO
7100 # CYGINT_ISO_MALLINFO == 1
7103 # The following properties are affected by this value
7104 # interface CYGINT_ISO_MALLINFO
7105 # Requires: 1 >= CYGINT_ISO_MALLINFO
7108 # Mallinfo() implementation header
7110 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7112 # No user value, uncomment the following line to provide one.
7114 # value_source default
7115 # Default value: 0 0
7118 # Program exit functionality implementations
7120 cdl_interface CYGINT_ISO_EXIT {
7121 # No options implement this inferface
7122 # This value cannot be modified here.
7125 # Requires: 1 >= CYGINT_ISO_EXIT
7126 # CYGINT_ISO_EXIT == 0
7129 # The following properties are affected by this value
7130 # interface CYGINT_ISO_EXIT
7131 # Requires: 1 >= CYGINT_ISO_EXIT
7132 # option CYGFUN_INFRA_DUMMY_ABORT
7133 # Requires: !CYGINT_ISO_EXIT
7134 # option CYGFUN_INFRA_DUMMY_ABORT
7135 # DefaultValue: CYGINT_ISO_EXIT == 0
7138 # Program exit functionality implementation header
7140 cdl_option CYGBLD_ISO_EXIT_HEADER {
7142 # No user value, uncomment the following line to provide one.
7144 # value_source default
7145 # Default value: 0 0
7148 # Program environment implementations
7150 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7151 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7152 # This value cannot be modified here.
7155 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7156 # CYGINT_ISO_STDLIB_ENVIRON == 1
7159 # The following properties are affected by this value
7160 # interface CYGINT_ISO_STDLIB_ENVIRON
7161 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7164 # Program environment implementation header
7166 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7168 # No user value, uncomment the following line to provide one.
7170 # value_source default
7171 # Default value: 0 0
7174 # system() implementations
7176 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7177 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7178 # This value cannot be modified here.
7181 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7182 # CYGINT_ISO_STDLIB_SYSTEM == 1
7185 # The following properties are affected by this value
7186 # interface CYGINT_ISO_STDLIB_SYSTEM
7187 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7190 # system() implementation header
7192 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7194 # No user value, uncomment the following line to provide one.
7196 # value_source default
7197 # Default value: 0 0
7200 # bsearch() implementations
7202 cdl_interface CYGINT_ISO_BSEARCH {
7203 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7204 # This value cannot be modified here.
7207 # Requires: 1 >= CYGINT_ISO_BSEARCH
7208 # CYGINT_ISO_BSEARCH == 1
7211 # The following properties are affected by this value
7212 # interface CYGINT_ISO_BSEARCH
7213 # Requires: 1 >= CYGINT_ISO_BSEARCH
7216 # bsearch() implementation header
7218 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7220 # No user value, uncomment the following line to provide one.
7222 # value_source default
7223 # Default value: 0 0
7226 # qsort() implementations
7228 cdl_interface CYGINT_ISO_QSORT {
7229 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7230 # This value cannot be modified here.
7233 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7234 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7237 # The following properties are affected by this value
7240 # qsort() implementation header
7242 cdl_option CYGBLD_ISO_QSORT_HEADER {
7244 # No user value, uncomment the following line to provide one.
7246 # value_source default
7247 # Default value: 0 0
7250 # abs()/labs() implementations
7252 cdl_interface CYGINT_ISO_ABS {
7253 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7254 # This value cannot be modified here.
7257 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7258 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7261 # The following properties are affected by this value
7264 # abs()/labs() implementation header
7266 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7268 # No user value, uncomment the following line to provide one.
7270 # The inferred value should not be edited directly.
7271 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7272 # value_source inferred
7273 # Default value: 0 0
7275 # The following properties are affected by this value
7276 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7277 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7280 # div()/ldiv() implementations
7282 cdl_interface CYGINT_ISO_DIV {
7283 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7284 # This value cannot be modified here.
7287 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7288 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7291 # The following properties are affected by this value
7294 # div()/ldiv() implementation header
7296 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7298 # No user value, uncomment the following line to provide one.
7300 # The inferred value should not be edited directly.
7301 inferred_value 1 <cyg/libc/stdlib/div.inl>
7302 # value_source inferred
7303 # Default value: 0 0
7305 # The following properties are affected by this value
7306 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7307 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7310 # Header defining the implementation's MB_CUR_MAX
7312 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7314 # No user value, uncomment the following line to provide one.
7316 # value_source default
7317 # Default value: 0 0
7319 # The following properties are affected by this value
7320 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7321 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7324 # Multibyte character implementations
7326 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7327 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7328 # This value cannot be modified here.
7331 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7332 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7335 # The following properties are affected by this value
7336 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7337 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7340 # Multibyte character implementation header
7342 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7344 # No user value, uncomment the following line to provide one.
7346 # value_source default
7347 # Default value: 0 0
7353 cdl_component CYGPKG_ISO_STRING {
7354 # There is no associated value.
7358 # Number of implementations of strerror() function
7360 cdl_interface CYGINT_ISO_STRERROR {
7361 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7362 # This value cannot be modified here.
7364 # Current value: 1 1
7365 # Requires: 1 >= CYGINT_ISO_STRERROR
7366 # CYGINT_ISO_STRERROR == 1
7369 # The following properties are affected by this value
7370 # interface CYGINT_ISO_STRERROR
7371 # Requires: 1 >= CYGINT_ISO_STRERROR
7374 # strerror() implementation header
7376 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7378 # No user value, uncomment the following line to provide one.
7380 # The inferred value should not be edited directly.
7381 inferred_value 1 <cyg/error/strerror.h>
7382 # value_source inferred
7383 # Default value: 0 0
7385 # The following properties are affected by this value
7386 # option CYGPKG_ERROR_STRERROR
7387 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7390 # memcpy() implementation header
7392 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7394 # No user value, uncomment the following line to provide one.
7396 # value_source default
7397 # Default value: 0 0
7400 # memset() implementation header
7402 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7404 # No user value, uncomment the following line to provide one.
7406 # value_source default
7407 # Default value: 0 0
7410 # Number of implementations of strtok_r() function
7412 cdl_interface CYGINT_ISO_STRTOK_R {
7413 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7414 # This value cannot be modified here.
7416 # Current value: 1 1
7417 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7418 # CYGINT_ISO_STRTOK_R == 1
7421 # The following properties are affected by this value
7422 # interface CYGINT_ISO_STRTOK_R
7423 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7426 # strtok_r() implementation header
7428 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7430 # No user value, uncomment the following line to provide one.
7432 # The inferred value should not be edited directly.
7433 inferred_value 1 <cyg/libc/string/string.h>
7434 # value_source inferred
7435 # Default value: 0 0
7437 # The following properties are affected by this value
7438 # package CYGPKG_LIBC_STRING
7439 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7442 # Number of implementations of locale-specific string functions
7443 # This covers locale-dependent string functions such as strcoll()
7446 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7447 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7448 # This value cannot be modified here.
7450 # Current value: 1 1
7451 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7452 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7455 # The following properties are affected by this value
7456 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7457 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7460 # Locale-specific string functions' implementation header
7461 # This covers locale-dependent string functions such as strcoll()
7464 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7466 # No user value, uncomment the following line to provide one.
7468 # The inferred value should not be edited directly.
7469 inferred_value 1 <cyg/libc/string/string.h>
7470 # value_source inferred
7471 # Default value: 0 0
7473 # The following properties are affected by this value
7474 # package CYGPKG_LIBC_STRING
7475 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7478 # Number of implementations of BSD string functions
7480 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7481 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7482 # This value cannot be modified here.
7484 # Current value: 0 0
7485 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7486 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7489 # The following properties are affected by this value
7490 # interface CYGINT_ISO_STRING_BSD_FUNCS
7491 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7494 # BSD string functions' implementation header
7496 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7498 # No user value, uncomment the following line to provide one.
7500 # The inferred value should not be edited directly.
7501 inferred_value 1 <cyg/libc/string/bsdstring.h>
7502 # value_source inferred
7503 # Default value: 0 0
7505 # The following properties are affected by this value
7506 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7507 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7510 # Number of implementations of other mem*() functions
7512 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7513 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7514 # This value cannot be modified here.
7516 # Current value: 1 1
7517 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7518 # CYGINT_ISO_STRING_MEMFUNCS == 1
7521 # The following properties are affected by this value
7522 # interface CYGINT_ISO_STRING_MEMFUNCS
7523 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7524 # component CYGBLD_BUILD_REDBOOT
7525 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7526 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7527 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7530 # Other mem*() functions' implementation header
7532 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7534 # No user value, uncomment the following line to provide one.
7536 # The inferred value should not be edited directly.
7537 inferred_value 1 <cyg/libc/string/string.h>
7538 # value_source inferred
7539 # Default value: 0 0
7541 # The following properties are affected by this value
7542 # package CYGPKG_LIBC_STRING
7543 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7546 # Number of implementations of other ISO C str*() functions
7547 # This covers the other str*() functions defined by ISO C.
7549 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7550 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7551 # This value cannot be modified here.
7553 # Current value: 1 1
7554 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7555 # CYGINT_ISO_STRING_STRFUNCS == 1
7558 # The following properties are affected by this value
7559 # interface CYGINT_ISO_STRING_STRFUNCS
7560 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7561 # option CYGFUN_INFRA_DUMMY_STRLEN
7562 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7563 # option CYGFUN_INFRA_DUMMY_STRLEN
7564 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7565 # component CYGBLD_BUILD_REDBOOT
7566 # Requires: CYGINT_ISO_STRING_STRFUNCS
7567 # component CYGPKG_IO_ETH_DRIVERS_NET
7568 # Requires: CYGINT_ISO_STRING_STRFUNCS
7569 # option CYGFUN_COMPRESS_ZLIB_GZIO
7570 # Requires: CYGINT_ISO_STRING_STRFUNCS
7571 # package CYGPKG_IO_FLASH
7572 # Requires: CYGINT_ISO_STRING_STRFUNCS
7573 # package CYGPKG_LIBC_STDLIB
7574 # Requires: CYGINT_ISO_STRING_STRFUNCS
7577 # Other ISO C str*() functions' implementation header
7578 # This covers the other str*() functions defined by ISO C.
7580 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7582 # No user value, uncomment the following line to provide one.
7584 # The inferred value should not be edited directly.
7585 inferred_value 1 <cyg/libc/string/string.h>
7586 # value_source inferred
7587 # Default value: 0 0
7589 # The following properties are affected by this value
7590 # package CYGPKG_LIBC_STRING
7591 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7595 # Clock and time functionality
7597 cdl_component CYGPKG_ISO_TIME {
7598 # There is no associated value.
7602 # time_t implementation header
7604 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7606 # No user value, uncomment the following line to provide one.
7608 # value_source default
7609 # Default value: 0 0
7612 # clock_t implementation header
7614 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7616 # No user value, uncomment the following line to provide one.
7618 # value_source default
7619 # Default value: 0 0
7622 # struct timeval implementation header
7624 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7626 # No user value, uncomment the following line to provide one.
7628 # value_source default
7629 # Default value: 0 0
7632 # fnmatch implementation header
7634 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7636 # No user value, uncomment the following line to provide one.
7638 # value_source default
7639 # Default value: 0 0
7642 # Number of implementations of POSIX timer types
7644 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7645 # No options implement this inferface
7646 # This value cannot be modified here.
7648 # Current value: 0 0
7649 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7650 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7653 # The following properties are affected by this value
7654 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7655 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7658 # POSIX timer types implementation header
7660 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7662 # No user value, uncomment the following line to provide one.
7664 # value_source default
7665 # Default value: 0 0
7668 # Number of implementations of POSIX clock types
7670 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7671 # No options implement this inferface
7672 # This value cannot be modified here.
7674 # Current value: 0 0
7675 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7676 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7679 # The following properties are affected by this value
7680 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7681 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7684 # POSIX clock types implementation header
7686 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7688 # No user value, uncomment the following line to provide one.
7690 # value_source default
7691 # Default value: 0 0
7694 # Number of implementations of ISO C types
7696 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7697 # No options implement this inferface
7698 # This value cannot be modified here.
7700 # Current value: 0 0
7701 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7702 # CYGINT_ISO_C_TIME_TYPES == 0
7705 # The following properties are affected by this value
7706 # interface CYGINT_ISO_C_TIME_TYPES
7707 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7710 # ISO C time types implementation header
7712 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7714 # No user value, uncomment the following line to provide one.
7716 # value_source default
7717 # Default value: 0 0
7720 # Number of implementations of POSIX timers
7722 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7723 # No options implement this inferface
7724 # This value cannot be modified here.
7726 # Current value: 0 0
7727 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7728 # CYGINT_ISO_POSIX_TIMERS == 0
7731 # The following properties are affected by this value
7732 # interface CYGINT_ISO_POSIX_TIMERS
7733 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7736 # POSIX timer implementation header
7738 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7740 # No user value, uncomment the following line to provide one.
7742 # value_source default
7743 # Default value: 0 0
7746 # Number of implementations of POSIX clocks
7748 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7749 # No options implement this inferface
7750 # This value cannot be modified here.
7752 # Current value: 0 0
7753 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7754 # CYGINT_ISO_POSIX_CLOCKS == 0
7757 # The following properties are affected by this value
7758 # interface CYGINT_ISO_POSIX_CLOCKS
7759 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7762 # POSIX clocks implementation header
7764 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7766 # No user value, uncomment the following line to provide one.
7768 # value_source default
7769 # Default value: 0 0
7772 # Number of implementations of ISO C clock functions
7774 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7775 # No options implement this inferface
7776 # This value cannot be modified here.
7778 # Current value: 0 0
7779 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7780 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7783 # The following properties are affected by this value
7784 # interface CYGINT_ISO_C_CLOCK_FUNCS
7785 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7788 # ISO C clock functions' implementation header
7790 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7792 # No user value, uncomment the following line to provide one.
7794 # value_source default
7795 # Default value: 0 0
7798 # Number of implementations of tzset() function
7800 cdl_interface CYGINT_ISO_TZSET {
7801 # No options implement this inferface
7802 # This value cannot be modified here.
7804 # Current value: 0 0
7805 # Requires: 1 >= CYGINT_ISO_TZSET
7806 # CYGINT_ISO_TZSET == 0
7809 # The following properties are affected by this value
7810 # interface CYGINT_ISO_TZSET
7811 # Requires: 1 >= CYGINT_ISO_TZSET
7814 # tzset() implementation header
7816 cdl_option CYGBLD_ISO_TZSET_HEADER {
7818 # No user value, uncomment the following line to provide one.
7820 # value_source default
7821 # Default value: 0 0
7825 # Signal functionality
7827 cdl_component CYGPKG_ISO_SIGNAL {
7828 # There is no associated value.
7832 # Number of implementations of signal numbers
7834 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7835 # No options implement this inferface
7836 # This value cannot be modified here.
7839 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7840 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7843 # The following properties are affected by this value
7844 # interface CYGINT_ISO_SIGNAL_NUMBERS
7845 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7848 # Signal numbering implementation header
7849 # This header provides the mapping of signal
7850 # names (e.g. SIGBUS) to numbers.
7852 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7854 # No user value, uncomment the following line to provide one.
7856 # value_source default
7857 # Default value: 0 0
7860 # Number of signal implementations
7862 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7863 # No options implement this inferface
7864 # This value cannot be modified here.
7867 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7868 # CYGINT_ISO_SIGNAL_IMPL == 0
7871 # The following properties are affected by this value
7872 # interface CYGINT_ISO_SIGNAL_IMPL
7873 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7876 # Signals implementation header
7878 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7880 # No user value, uncomment the following line to provide one.
7882 # value_source default
7883 # Default value: 0 0
7886 # POSIX real time signals feature test macro
7887 # This defines the POSIX feature test macro
7888 # that indicates that the POSIX real time signals
7891 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7892 # No options implement this inferface
7893 # This value cannot be modified here.
7896 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7897 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7900 # The following properties are affected by this value
7901 # interface CYGINT_POSIX_REALTIME_SIGNALS
7902 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7906 # Non-local jumps functionality
7908 cdl_component CYGPKG_ISO_SETJMP {
7909 # There is no associated value.
7913 # setjmp() / longjmp() implementations
7915 cdl_interface CYGINT_ISO_SETJMP {
7916 # No options implement this inferface
7917 # This value cannot be modified here.
7920 # Requires: 1 >= CYGINT_ISO_SETJMP
7921 # CYGINT_ISO_SETJMP == 0
7924 # The following properties are affected by this value
7925 # interface CYGINT_ISO_SETJMP
7926 # Requires: 1 >= CYGINT_ISO_SETJMP
7929 # setjmp() / longjmp() implementation header
7931 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7933 # No user value, uncomment the following line to provide one.
7935 # value_source default
7936 # Default value: 0 0
7939 # sigsetjmp() / siglongjmp() implementations
7941 cdl_interface CYGINT_ISO_SIGSETJMP {
7942 # No options implement this inferface
7943 # This value cannot be modified here.
7946 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7947 # CYGINT_ISO_SIGSETJMP == 0
7950 # The following properties are affected by this value
7951 # interface CYGINT_ISO_SIGSETJMP
7952 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7955 # sigsetjmp() / siglongjmp() implementation header
7957 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7959 # No user value, uncomment the following line to provide one.
7961 # value_source default
7962 # Default value: 0 0
7966 # Assertions implementation header
7968 cdl_option CYGBLD_ISO_ASSERT_HEADER {
7970 # No user value, uncomment the following line to provide one.
7972 # value_source default
7973 # Default value: 0 0
7976 # POSIX file control
7977 # This covers the POSIX file control definitions,
7978 # normally found in <fcntl.h>
7980 cdl_component CYGPKG_ISO_POSIX_FCNTL {
7981 # There is no associated value.
7985 # POSIX open flags implementation header
7987 cdl_option CYGBLD_ISO_OFLAG_HEADER {
7989 # No user value, uncomment the following line to provide one.
7991 # value_source default
7992 # Default value: 0 0
7995 # POSIX fcntl() implementations
7997 cdl_interface CYGINT_ISO_FCNTL {
7998 # No options implement this inferface
7999 # This value cannot be modified here.
8002 # Requires: 1 >= CYGINT_ISO_FCNTL
8003 # CYGINT_ISO_FCNTL == 0
8006 # The following properties are affected by this value
8007 # interface CYGINT_ISO_FCNTL
8008 # Requires: 1 >= CYGINT_ISO_FCNTL
8011 # POSIX fcntl() implementation header
8013 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8015 # No user value, uncomment the following line to provide one.
8017 # value_source default
8018 # Default value: 0 0
8021 # POSIX file open implementations
8023 cdl_interface CYGINT_ISO_OPEN {
8024 # No options implement this inferface
8025 # This value cannot be modified here.
8028 # Requires: 1 >= CYGINT_ISO_OPEN
8029 # CYGINT_ISO_OPEN == 0
8032 # The following properties are affected by this value
8033 # interface CYGINT_ISO_OPEN
8034 # Requires: 1 >= CYGINT_ISO_OPEN
8037 # POSIX file open implementation header
8039 cdl_option CYGBLD_ISO_OPEN_HEADER {
8041 # No user value, uncomment the following line to provide one.
8043 # value_source default
8044 # Default value: 0 0
8048 # <sys/stat.h> definitions implementation header
8050 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8052 # No user value, uncomment the following line to provide one.
8054 # value_source default
8055 # Default value: 0 0
8058 # POSIX directory reading implementation
8060 cdl_interface CYGINT_ISO_DIRENT {
8061 # No options implement this inferface
8062 # This value cannot be modified here.
8065 # Requires: 1 >= CYGINT_ISO_DIRENT
8066 # CYGINT_ISO_DIRENT == 0
8069 # The following properties are affected by this value
8070 # interface CYGINT_ISO_DIRENT
8071 # Requires: 1 >= CYGINT_ISO_DIRENT
8074 # <dirent.h> definitions implementation header
8076 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8078 # No user value, uncomment the following line to provide one.
8080 # value_source default
8081 # Default value: 0 0
8084 # POSIX <sys/types.h> contents
8085 # This covers the types required by POSIX to be in
8088 cdl_component CYGPKG_ISO_POSIX_TYPES {
8089 # There is no associated value.
8093 # POSIX thread types implementations
8095 cdl_interface CYGINT_ISO_PTHREADTYPES {
8096 # No options implement this inferface
8097 # This value cannot be modified here.
8100 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8101 # CYGINT_ISO_PTHREADTYPES == 0
8104 # The following properties are affected by this value
8105 # interface CYGINT_ISO_PTHREADTYPES
8106 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8107 # interface CYGINT_ISO_PMUTEXTYPES
8108 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8111 # POSIX thread types implementation header
8113 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8115 # No user value, uncomment the following line to provide one.
8117 # value_source default
8118 # Default value: 0 0
8121 # POSIX mutex types implementations
8123 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8124 # No options implement this inferface
8125 # This value cannot be modified here.
8128 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8129 # CYGINT_ISO_PTHREADTYPES == 0
8133 # POSIX mutex types implementation header
8135 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8137 # No user value, uncomment the following line to provide one.
8139 # value_source default
8140 # Default value: 0 0
8143 # ssize_t implementation header
8145 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8147 # No user value, uncomment the following line to provide one.
8149 # value_source default
8150 # Default value: 0 0
8153 # Filesystem types implementation header
8155 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8157 # No user value, uncomment the following line to provide one.
8159 # value_source default
8160 # Default value: 0 0
8163 # gid_t, pid_t, uid_t implementation header
8165 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8167 # No user value, uncomment the following line to provide one.
8169 # value_source default
8170 # Default value: 0 0
8174 # Non-POSIX <sys/types.h> contents
8175 # This covers the extra types required by non-POSIX
8176 # packages to be in <sys/types.h>. These would normally
8177 # only be visible if _POSIX_SOURCE is not defined.
8179 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8180 # There is no associated value.
8184 # BSD compatible types
8186 cdl_interface CYGINT_ISO_BSDTYPES {
8187 # No options implement this inferface
8188 # This value cannot be modified here.
8191 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8192 # CYGINT_ISO_BSDTYPES == 0
8195 # The following properties are affected by this value
8196 # interface CYGINT_ISO_BSDTYPES
8197 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8202 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8204 # No user value, uncomment the following line to provide one.
8206 # value_source default
8207 # Default value: 0 0
8213 cdl_component CYGPKG_ISO_UTSNAME {
8214 # There is no associated value.
8220 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8222 # No user value, uncomment the following line to provide one.
8224 # value_source default
8225 # Default value: 0 0
8231 cdl_component CYGPKG_ISO_SCHED {
8232 # There is no associated value.
8236 # POSIX scheduler implementations
8238 cdl_interface CYGINT_ISO_SCHED_IMPL {
8239 # No options implement this inferface
8240 # This value cannot be modified here.
8243 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8244 # CYGINT_ISO_SCHED_IMPL == 0
8247 # The following properties are affected by this value
8248 # interface CYGINT_ISO_SCHED_IMPL
8249 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8252 # POSIX scheduler implementation header
8254 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8256 # No user value, uncomment the following line to provide one.
8258 # value_source default
8259 # Default value: 0 0
8265 cdl_component CYGPKG_ISO_SEMAPHORES {
8266 # There is no associated value.
8270 # POSIX semaphore implementations
8272 cdl_interface CYGINT_ISO_SEMAPHORES {
8273 # No options implement this inferface
8274 # This value cannot be modified here.
8277 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8278 # CYGINT_ISO_SEMAPHORES == 0
8281 # The following properties are affected by this value
8282 # interface CYGINT_ISO_SEMAPHORES
8283 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8286 # POSIX semaphore implementation header
8288 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8290 # No user value, uncomment the following line to provide one.
8292 # value_source default
8293 # Default value: 0 0
8297 # POSIX message queues
8299 cdl_component CYGPKG_ISO_MQUEUE {
8300 # There is no associated value.
8306 cdl_interface CYGINT_ISO_MQUEUE {
8307 # No options implement this inferface
8308 # This value cannot be modified here.
8311 # Requires: 1 >= CYGINT_ISO_MQUEUE
8312 # CYGINT_ISO_MQUEUE == 0
8315 # The following properties are affected by this value
8316 # interface CYGINT_ISO_MQUEUE
8317 # Requires: 1 >= CYGINT_ISO_MQUEUE
8318 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8319 # ActiveIf: CYGINT_ISO_MQUEUE
8320 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8321 # ActiveIf: CYGINT_ISO_MQUEUE
8324 # Implementation header
8326 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8328 # No user value, uncomment the following line to provide one.
8330 # value_source default
8331 # Default value: 0 0
8334 # Maximum number of open message queues
8336 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8337 # This option is not active
8338 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8339 # CYGINT_ISO_MQUEUE == 0
8343 # No user value, uncomment the following line to provide one.
8345 # value_source default
8346 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8347 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8348 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8352 # Maximum number of message priorities
8354 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8355 # This option is not active
8356 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8357 # CYGINT_ISO_MQUEUE == 0
8361 # No user value, uncomment the following line to provide one.
8362 # user_value 1 65535
8363 # value_source default
8364 # Default value: 1 65535
8370 cdl_component CYGPKG_ISO_PTHREAD {
8371 # There is no associated value.
8375 # POSIX pthread implementations
8377 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8378 # No options implement this inferface
8379 # This value cannot be modified here.
8381 # Current value: 0 0
8382 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8383 # CYGINT_ISO_PTHREAD_IMPL == 0
8386 # The following properties are affected by this value
8387 # interface CYGINT_ISO_PTHREAD_IMPL
8388 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8391 # POSIX pthread implementation header
8393 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8395 # No user value, uncomment the following line to provide one.
8397 # value_source default
8398 # Default value: 0 0
8401 # POSIX mutex/cond var implementations
8403 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8404 # No options implement this inferface
8405 # This value cannot be modified here.
8407 # Current value: 0 0
8408 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8409 # CYGINT_ISO_PTHREAD_MUTEX == 0
8412 # The following properties are affected by this value
8413 # interface CYGINT_ISO_PTHREAD_MUTEX
8414 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8417 # POSIX mutex/cond var implementation header
8419 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8421 # No user value, uncomment the following line to provide one.
8423 # value_source default
8424 # Default value: 0 0
8430 cdl_component CYGPKG_ISO_LIMITS {
8431 # There is no associated value.
8435 # POSIX pthread limits implementations
8437 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8438 # No options implement this inferface
8439 # This value cannot be modified here.
8442 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8443 # CYGINT_ISO_POSIX_LIMITS == 0
8446 # The following properties are affected by this value
8447 # interface CYGINT_ISO_POSIX_LIMITS
8448 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8451 # POSIX pthread limits implementation header
8453 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8455 # No user value, uncomment the following line to provide one.
8457 # value_source default
8458 # Default value: 0 0
8461 # OPEN_MAX implementation header
8463 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8465 # No user value, uncomment the following line to provide one.
8467 # value_source default
8468 # Default value: 0 0
8471 # LINK_MAX implementation header
8473 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8475 # No user value, uncomment the following line to provide one.
8477 # value_source default
8478 # Default value: 0 0
8481 # NAME_MAX implementation header
8483 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8485 # No user value, uncomment the following line to provide one.
8487 # value_source default
8488 # Default value: 0 0
8491 # PATH_MAX implementation header
8493 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8495 # No user value, uncomment the following line to provide one.
8497 # value_source default
8498 # Default value: 0 0
8504 cdl_component CYGPKG_ISO_TERMIOS {
8505 # There is no associated value.
8509 # POSIX termios implementations
8511 cdl_interface CYGINT_ISO_TERMIOS {
8512 # No options implement this inferface
8513 # This value cannot be modified here.
8516 # Requires: 1 >= CYGINT_ISO_TERMIOS
8517 # CYGINT_ISO_TERMIOS == 0
8520 # The following properties are affected by this value
8521 # interface CYGINT_ISO_TERMIOS
8522 # Requires: 1 >= CYGINT_ISO_TERMIOS
8525 # POSIX termios implementation header
8527 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8529 # No user value, uncomment the following line to provide one.
8531 # value_source default
8532 # Default value: 0 0
8538 cdl_component CYGPKG_ISO_DLFCN {
8539 # There is no associated value.
8543 # Dynamic load implementations
8545 cdl_interface CYGINT_ISO_DLFCN {
8546 # No options implement this inferface
8547 # This value cannot be modified here.
8550 # Requires: 1 >= CYGINT_ISO_DLFCN
8551 # CYGINT_ISO_DLFCN == 0
8554 # The following properties are affected by this value
8555 # interface CYGINT_ISO_DLFCN
8556 # Requires: 1 >= CYGINT_ISO_DLFCN
8559 # Dynamic load implementation header
8561 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8563 # No user value, uncomment the following line to provide one.
8565 # value_source default
8566 # Default value: 0 0
8570 # UNIX standard functions
8572 cdl_component CYGPKG_ISO_UNISTD {
8573 # There is no associated value.
8577 # POSIX timer operations implementations
8579 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8580 # No options implement this inferface
8581 # This value cannot be modified here.
8583 # Current value: 0 0
8584 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8585 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8588 # The following properties are affected by this value
8589 # interface CYGINT_ISO_POSIX_TIMER_OPS
8590 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8593 # POSIX timer operations implementation header
8595 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8597 # No user value, uncomment the following line to provide one.
8599 # value_source default
8600 # Default value: 0 0
8603 # POSIX sleep() implementations
8605 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8606 # No options implement this inferface
8607 # This value cannot be modified here.
8609 # Current value: 0 0
8610 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8611 # CYGINT_ISO_POSIX_SLEEP == 0
8614 # The following properties are affected by this value
8615 # interface CYGINT_ISO_POSIX_SLEEP
8616 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8619 # POSIX sleep() implementation header
8621 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8623 # No user value, uncomment the following line to provide one.
8625 # value_source default
8626 # Default value: 0 0
8630 # select()/poll() functions
8632 cdl_component CYGPKG_ISO_SELECT {
8633 # There is no associated value.
8637 # select() implementations
8639 cdl_interface CYGINT_ISO_SELECT {
8640 # No options implement this inferface
8641 # This value cannot be modified here.
8643 # Current value: 0 0
8644 # Requires: 1 >= CYGINT_ISO_SELECT
8645 # CYGINT_ISO_SELECT == 0
8648 # The following properties are affected by this value
8649 # interface CYGINT_ISO_SELECT
8650 # Requires: 1 >= CYGINT_ISO_SELECT
8653 # select() implementation header
8655 cdl_option CYGBLD_ISO_SELECT_HEADER {
8657 # No user value, uncomment the following line to provide one.
8659 # value_source default
8660 # Default value: 0 0
8663 # poll() implementations
8665 cdl_interface CYGINT_ISO_POLL {
8666 # No options implement this inferface
8667 # This value cannot be modified here.
8669 # Current value: 0 0
8670 # Requires: 1 >= CYGINT_ISO_POLL
8671 # CYGINT_ISO_POLL == 0
8674 # The following properties are affected by this value
8675 # interface CYGINT_ISO_POLL
8676 # Requires: 1 >= CYGINT_ISO_POLL
8679 # poll() implementation header
8681 cdl_option CYGBLD_ISO_POLL_HEADER {
8683 # No user value, uncomment the following line to provide one.
8685 # value_source default
8686 # Default value: 0 0
8690 # NetDB utility functions
8692 cdl_component CYGPKG_ISO_NETDB {
8693 # There is no associated value.
8697 # DNS implementations
8699 cdl_interface CYGINT_ISO_DNS {
8700 # No options implement this inferface
8701 # This value cannot be modified here.
8704 # Requires: 1 >= CYGINT_ISO_DNS
8705 # CYGINT_ISO_DNS == 0
8708 # The following properties are affected by this value
8709 # interface CYGINT_ISO_DNS
8710 # Requires: 1 >= CYGINT_ISO_DNS
8713 # DNS implementation header
8715 cdl_option CYGBLD_ISO_DNS_HEADER {
8717 # No user value, uncomment the following line to provide one.
8719 # value_source default
8720 # Default value: 0 0
8723 # Protocol network database implementations
8725 cdl_interface CYGINT_ISO_NETDB_PROTO {
8726 # No options implement this inferface
8727 # This value cannot be modified here.
8730 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8731 # CYGINT_ISO_NETDB_PROTO == 0
8734 # The following properties are affected by this value
8735 # interface CYGINT_ISO_NETDB_PROTO
8736 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8739 # Protocol network database implementation header
8741 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8743 # No user value, uncomment the following line to provide one.
8745 # value_source default
8746 # Default value: 0 0
8749 # Services network database implementations
8751 cdl_interface CYGINT_ISO_NETDB_SERV {
8752 # No options implement this inferface
8753 # This value cannot be modified here.
8756 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8757 # CYGINT_ISO_NETDB_SERV == 0
8760 # The following properties are affected by this value
8761 # interface CYGINT_ISO_NETDB_SERV
8762 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8765 # Services network database implementation header
8767 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8769 # No user value, uncomment the following line to provide one.
8771 # value_source default
8772 # Default value: 0 0
8777 # Package specific build options including control over
8778 # compiler flags used only in building this package,
8779 # and details of which tests are built.
8781 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8782 # There is no associated value.
8786 # Additional compiler flags
8787 # This option modifies the set of compiler flags for
8788 # building the ISO C and POSIX infrastructure package.
8789 # These flags are used in addition to the set of global flags.
8791 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8793 # No user value, uncomment the following line to provide one.
8795 # value_source default
8799 # Suppressed compiler flags
8800 # This option modifies the set of compiler flags for
8801 # building the ISO C and POSIX infrastructure package.
8802 # These flags are removed from the set of global flags
8805 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8807 # No user value, uncomment the following line to provide one.
8809 # value_source default
8816 # doc: ref/services-crc.html
8817 # This package provides support for CRC calculation. Currently
8818 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8819 # Gary S. Brown, and a 16 bit CRC.
8821 cdl_package CYGPKG_CRC {
8822 # Packages cannot be added or removed, nor can their version be changed,
8823 # simply by editing their value. Instead the appropriate configuration
8824 # should be used to perform these actions.
8826 # This value cannot be modified here.
8828 # Current value: 1 current
8830 # The following properties are affected by this value
8831 # package CYGPKG_COMPRESS_ZLIB
8832 # Requires: CYGPKG_CRC
8838 cdl_option CYGPKG_CRC_TESTS {
8839 # Calculated value: "tests/crc_test"
8841 # Current_value: tests/crc_test
8845 # Zlib compress and decompress package
8846 # This package provides support for compression and
8849 cdl_package CYGPKG_COMPRESS_ZLIB {
8850 # Packages cannot be added or removed, nor can their version be changed,
8851 # simply by editing their value. Instead the appropriate configuration
8852 # should be used to perform these actions.
8854 # This value cannot be modified here.
8856 # Current value: 1 current
8857 # Requires: CYGPKG_ISOINFRA
8858 # CYGPKG_ISOINFRA == current
8860 # Requires: CYGPKG_CRC
8861 # CYGPKG_CRC == current
8864 # The following properties are affected by this value
8865 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8866 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8870 # Override memory allocation routines.
8872 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8873 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8874 # This value cannot be modified here.
8878 # The following properties are affected by this value
8879 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8880 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8883 # Should deflate() produce 'gzip' compatible output?
8884 # If this option is set then the output of calling deflate()
8885 # will be wrapped up as a 'gzip' compatible file.
8887 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8889 # No user value, uncomment the following line to provide one.
8891 # value_source default
8895 # Does this library need malloc?
8896 # This pseudo-option will force the memalloc library to be
8897 # required iff the application does not provide it's own
8900 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8901 # This option is not active
8902 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8903 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8907 # No user value, uncomment the following line to provide one.
8909 # value_source default
8911 # Requires: CYGPKG_MEMALLOC
8912 # CYGPKG_MEMALLOC == current
8916 # Include stdio-like utility functions
8917 # This option enables the stdio-like zlib utility functions
8918 # (gzread/gzwrite and friends) provided in gzio.c.
8920 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8922 # No user value, uncomment the following line to provide one.
8924 # value_source default
8925 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8926 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8928 # Requires: CYGINT_ISO_STDIO_FILEPOS
8929 # CYGINT_ISO_STDIO_FILEPOS == 0
8931 # Requires: CYGINT_ISO_STRING_STRFUNCS
8932 # CYGINT_ISO_STRING_STRFUNCS == 1
8934 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8935 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8937 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8938 # CYGINT_ISO_STDIO_FILEACCESS == 0
8942 # Zlib compress and decompress package build options
8943 # Package specific build options including control over
8944 # compiler flags used only in building this package,
8945 # and details of which tests are built.
8947 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8948 # There is no associated value.
8952 # Additional compiler flags
8953 # This option modifies the set of compiler flags for
8954 # building this package. These flags are used in addition
8955 # to the set of global flags.
8957 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8959 # No user value, uncomment the following line to provide one.
8960 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8961 # value_source default
8962 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
8965 # Suppressed compiler flags
8966 # This option modifies the set of compiler flags for
8967 # building this package. These flags are removed from
8968 # the set of global flags if present.
8970 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
8972 # No user value, uncomment the following line to provide one.
8973 # user_value -Wstrict-prototypes
8974 # value_source default
8975 # Default value: -Wstrict-prototypes
8978 # Additional compiler flags
8979 # This option modifies the set of compiler flags for
8980 # building this package. These flags are used in addition
8981 # to the set of global flags.
8983 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
8985 # No user value, uncomment the following line to provide one.
8987 # value_source default
8991 # Suppressed compiler flags
8992 # This option modifies the set of compiler flags for
8993 # building this package. These flags are removed from
8994 # the set of global flags if present.
8996 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
8998 # No user value, uncomment the following line to provide one.
9000 # value_source default
9007 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9008 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9010 # Current_value: tests/zlib1.c tests/zlib2.c
9014 # FLASH device drivers
9015 # doc: ref/flash.html
9016 # This option enables drivers for basic I/O services on
9019 cdl_package CYGPKG_IO_FLASH {
9020 # Packages cannot be added or removed, nor can their version be changed,
9021 # simply by editing their value. Instead the appropriate configuration
9022 # should be used to perform these actions.
9024 # This value cannot be modified here.
9026 # Current value: 1 current
9027 # Requires: CYGPKG_ISOINFRA
9028 # CYGPKG_ISOINFRA == current
9030 # Requires: CYGINT_ISO_STRING_STRFUNCS
9031 # CYGINT_ISO_STRING_STRFUNCS == 1
9034 # The following properties are affected by this value
9035 # component CYGSEM_REDBOOT_FLASH_CONFIG
9036 # DefaultValue: CYGPKG_IO_FLASH != 0
9037 # package CYGPKG_DEVS_FLASH_ONMXC
9038 # ActiveIf: CYGPKG_IO_FLASH
9042 # Hardware FLASH device drivers
9043 # This option enables the hardware device drivers
9044 # for the current platform.
9046 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9047 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9048 # This value cannot be modified here.
9052 # The following properties are affected by this value
9053 # component CYGPKG_REDBOOT_FLASH
9054 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9057 # Hardware FLASH device drivers are not in RAM
9058 # Use of this interface is deprecated.
9059 # Drivers should make sure that the functions are
9060 # linked to RAM by putting them in .2ram sections.
9062 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9063 # No options implement this inferface
9064 # This value cannot be modified here.
9066 # Current value: 0 0
9067 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9068 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9071 # The following properties are affected by this value
9072 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9073 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9076 # Hardware can support block locking
9077 # This option will be enabled by devices which can support
9078 # locking (write-protection) of individual blocks.
9080 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9081 # No options implement this inferface
9082 # This value cannot be modified here.
9084 # Current value: 0 0
9086 # The following properties are affected by this value
9087 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9088 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9091 # Hardware cannot support direct access to FLASH memory
9092 # This option will be asserted by devices which cannot support
9093 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9094 # devices). In these cases, the driver must provide an appropriate
9095 # hardware access function.
9097 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9099 # No user value, uncomment the following line to provide one.
9101 # The inferred value should not be edited directly.
9103 # value_source inferred
9105 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9106 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9109 # The following properties are affected by this value
9110 # option CYGPRI_REDBOOT_ZLIB_FLASH
9111 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9112 # component CYGHWR_DEVS_FLASH_MMC
9113 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9114 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9115 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9116 # option CYGHWR_DEVS_FLASH_MMC_SD
9117 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9118 # option CYGHWR_DEVS_FLASH_MXC_NAND
9119 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9122 # Display status messages during flash operations
9123 # Selecting this option will cause the drivers to print status
9124 # messages as various flash operations are undertaken.
9126 cdl_option CYGSEM_IO_FLASH_CHATTER {
9128 # No user value, uncomment the following line to provide one.
9130 # value_source default
9134 # Verify data programmed to flash
9135 # Selecting this option will cause verification of data
9136 # programmed to flash.
9138 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9140 # No user value, uncomment the following line to provide one.
9142 # The inferred value should not be edited directly.
9144 # value_source inferred
9147 # The following properties are affected by this value
9148 # option CYGSEM_IO_FLASH_READ_INDIRECT
9149 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9152 # Platform has flash soft DIP switch write-protect
9153 # Selecting this option will cause the state of a hardware jumper or
9154 # dipswitch to be read by software to determine whether the flash is
9155 # write-protected or not.
9157 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9159 # No user value, uncomment the following line to provide one.
9161 # value_source default
9165 # Instantiate in I/O block device API
9166 # Provides a block device accessible using the standard I/O
9167 # API ( cyg_io_read() etc. )
9169 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9170 # This option is not active
9171 # ActiveIf constraint: CYGPKG_IO
9172 # CYGPKG_IO (unknown) == 0
9176 # No user value, uncomment the following line to provide one.
9178 # value_source default
9183 # Name of flash device 1 block device
9185 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9186 # This option is not active
9187 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9188 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9191 # No user value, uncomment the following line to provide one.
9192 # user_value "\"/dev/flash1\""
9193 # value_source default
9194 # Default value: "\"/dev/flash1\""
9199 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9200 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9201 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9202 # This option is not active
9203 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9205 # This value cannot be modified here.
9208 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9209 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9212 # The following properties are affected by this value
9213 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9214 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9217 # Static configuration
9218 # This configures the flash device 1 block device
9219 # with static base and length
9221 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9222 # This option is not active
9223 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9226 # No user value, uncomment the following line to provide one.
9228 # value_source default
9233 # Start offset from flash base
9234 # This gives the offset from the base of flash which this
9235 # block device corresponds to.
9237 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9238 # This option is not active
9239 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9242 # No user value, uncomment the following line to provide one.
9243 # user_value 0x00100000
9244 # value_source default
9245 # Default value: 0x00100000
9249 # This gives the length of the region of flash given over
9250 # to this block device.
9252 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9253 # This option is not active
9254 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9257 # No user value, uncomment the following line to provide one.
9258 # user_value 0x00100000
9259 # value_source default
9260 # Default value: 0x00100000
9264 # Configuration from FIS
9265 # This configures the flash device 1 block device
9268 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9269 # This option is not active
9270 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9273 # No user value, uncomment the following line to provide one.
9275 # value_source default
9282 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9283 # This option is not active
9284 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9285 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9288 # No user value, uncomment the following line to provide one.
9289 # user_value "\"jffs2\""
9290 # value_source default
9291 # Default value: "\"jffs2\""
9297 # Flash device driver build options
9298 # Package specific build options including control over
9299 # compiler flags used only in building this package,
9300 # and details of which tests are built.
9302 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9303 # There is no associated value.
9307 # Additional compiler flags
9308 # This option modifies the set of compiler flags for
9309 # building the flash device drivers. These flags are used in addition
9310 # to the set of global flags.
9312 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9314 # No user value, uncomment the following line to provide one.
9316 # value_source default
9320 # Suppressed compiler flags
9321 # This option modifies the set of compiler flags for
9322 # building the flash device drivers. These flags are removed from
9323 # the set of global flags if present.
9325 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9327 # No user value, uncomment the following line to provide one.
9329 # value_source default
9333 # Flash device driver tests
9334 # This option specifies the set of tests for the flash device drivers.
9336 cdl_component CYGPKG_IO_FLASH_TESTS {
9337 # Calculated value: "tests/flash1"
9339 # Current_value: tests/flash1
9343 # Start offset from flash base
9344 # This gives the offset from the base of flash where tests
9345 # can be run. It is important to set this correctly, as an
9346 # incorrect value could allow the tests to write over critical
9347 # portions of the FLASH device and possibly render the target
9348 # board totally non-functional.
9350 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9352 # No user value, uncomment the following line to provide one.
9353 # user_value 0x00100000
9354 # value_source default
9355 # Default value: 0x00100000
9359 # This gives the length of the region of flash used for testing.
9361 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9363 # No user value, uncomment the following line to provide one.
9364 # user_value 0x00100000
9365 # value_source default
9366 # Default value: 0x00100000
9371 # Support FLASH memory on Freescale MXC platforms
9373 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9374 # Packages cannot be added or removed, nor can their version be changed,
9375 # simply by editing their value. Instead the appropriate configuration
9376 # should be used to perform these actions.
9378 # ActiveIf constraint: CYGPKG_IO_FLASH
9379 # CYGPKG_IO_FLASH == current
9382 # This value cannot be modified here.
9384 # Current value: 1 current
9388 # MXC platform MMC card support
9389 # When this option is enabled, it indicates MMC card is
9390 # supported on the MXC platforms
9392 cdl_component CYGHWR_DEVS_FLASH_MMC {
9394 # No user value, uncomment the following line to provide one.
9396 # value_source default
9398 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9399 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9402 # The following properties are affected by this value
9403 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9404 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9405 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9406 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9407 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9408 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9409 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9410 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9414 # MXC platform MMC card for newer SDHC controllers
9416 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9417 # This option is not active
9418 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9419 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9420 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9421 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9422 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9423 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9427 # No user value, uncomment the following line to provide one.
9429 # value_source default
9431 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9432 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9436 # MXC platform MMC card for older MMC/SD controllers
9438 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9439 # This option is not active
9440 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9441 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9442 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9443 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9447 # No user value, uncomment the following line to provide one.
9449 # value_source default
9451 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9452 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9457 # MXC platform NOR flash memory support
9458 # When this option is enabled, it indicates NOR flash is
9459 # supported on the MXC platforms
9461 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9463 # No user value, uncomment the following line to provide one.
9465 # The inferred value should not be edited directly.
9467 # value_source inferred
9470 # The following properties are affected by this value
9471 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9472 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9473 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9474 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9475 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9476 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9477 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9478 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9479 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9480 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9483 # MXC platform NAND flash memory support
9484 # When this option is enabled, it indicates NAND flash is
9485 # supported on the MXC platforms
9487 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9489 # No user value, uncomment the following line to provide one.
9491 # The inferred value should not be edited directly.
9493 # value_source inferred
9495 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9496 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9499 # The following properties are affected by this value
9500 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9501 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9502 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9503 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9504 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9505 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9506 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9507 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9508 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9509 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9510 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9511 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9514 # i.MX platform SPI NOR flash memory support
9515 # When this option is enabled, it indicates SPI NOR flash is
9516 # supported on the i.MX platforms
9518 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9520 # No user value, uncomment the following line to provide one.
9522 # value_source default
9524 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9525 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9529 # MXC platform ATA support
9530 # When this option is enabled, it indicates ATA is
9531 # supported on the MXC platforms
9533 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9535 # No user value, uncomment the following line to provide one.
9537 # value_source default
9541 # Use a flash based Bad Block Table
9543 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9544 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9545 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9548 # There is no associated value.
9552 # When this option is enabled, the driver will search for a flash
9553 # based bad block table
9555 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9557 # No user value, uncomment the following line to provide one.
9559 # value_source default
9563 # header file defining the NAND BBT descriptor
9564 # defines the name of the header file that describes the BBT layout
9566 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9568 # No user value, uncomment the following line to provide one.
9570 # The inferred value should not be edited directly.
9571 inferred_value 1 <cyg/io/tx27_nand_bbt.h>
9572 # value_source inferred
9573 # Default value: 0 0
9576 # Number of blocks to reserve for BBT
9577 # Number of blocks to reserve for BBT
9579 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9581 # No user value, uncomment the following line to provide one.
9583 # value_source default
9588 # MXC platform multi flash memory support
9589 # When this option is enabled, it indicates multi flashes are
9590 # supported on the MXC platforms (like NAND and NOR)
9592 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9593 # This option is not active
9594 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9595 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9596 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9597 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9598 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9599 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9600 # CYGHWR_DEVS_FLASH_MMC == 0
9601 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9602 # CYGHWR_DEVS_FLASH_MMC == 0
9606 # No user value, uncomment the following line to provide one.
9608 # The inferred value should not be edited directly.
9610 # value_source inferred
9614 # MXC platform NAND flash reset workaround support
9615 # When this option is enabled, it indicates 0xFFFF is used for
9616 # the NAND reset command instead of 0xFF.
9618 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9619 # No options implement this inferface
9620 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9621 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9624 # This value cannot be modified here.
9631 # Dynamic memory allocation
9632 # doc: ref/memalloc.html
9633 # This package provides memory allocator infrastructure required for
9634 # dynamic memory allocators, including the ISO standard malloc
9635 # interface. It also contains some sample implementations.
9637 cdl_package CYGPKG_MEMALLOC {
9638 # Packages cannot be added or removed, nor can their version be changed,
9639 # simply by editing their value. Instead the appropriate configuration
9640 # should be used to perform these actions.
9642 # This value cannot be modified here.
9644 # Current value: 1 current
9646 # The following properties are affected by this value
9647 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9648 # Requires: CYGPKG_MEMALLOC
9652 # Memory allocator implementations
9653 # This component contains configuration options related to the
9654 # various memory allocators available.
9656 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9657 # There is no associated value.
9661 # Fixed block allocator
9662 # This component contains configuration options related to the
9663 # fixed block memory allocator.
9665 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9666 # There is no associated value.
9671 # With this option enabled, this allocator will be
9672 # made thread-safe. Additionally allocation functions
9673 # are made available that allow a thread to wait
9674 # until memory is available.
9676 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9677 # This option is not active
9678 # ActiveIf constraint: CYGPKG_KERNEL
9679 # CYGPKG_KERNEL (unknown) == 0
9683 # No user value, uncomment the following line to provide one.
9685 # value_source default
9690 # Simple variable block allocator
9691 # This component contains configuration options related to the
9692 # simple variable block memory allocator. This allocator is not
9693 # very fast, and in particular does not scale well with large
9694 # numbers of allocations. It is however very compact in terms of
9695 # code size and does not have very much overhead per allocation.
9697 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9698 # There is no associated value.
9703 # With this option enabled, this allocator will be
9704 # made thread-safe. Additionally allocation functions
9705 # are added that allow a thread to wait until memory
9706 # are made available that allow a thread to wait
9707 # until memory is available.
9709 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9710 # This option is not active
9711 # ActiveIf constraint: CYGPKG_KERNEL
9712 # CYGPKG_KERNEL (unknown) == 0
9716 # No user value, uncomment the following line to provide one.
9718 # value_source default
9723 # The variable-block memory allocator can perform coalescing
9724 # of memory whenever the application code releases memory back
9725 # to the pool. This coalescing reduces the possibility of
9726 # memory fragmentation problems, but involves extra code and
9729 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9731 # No user value, uncomment the following line to provide one.
9733 # value_source default
9736 # The following properties are affected by this value
9737 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9738 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9743 # This component contains configuration options related to the
9744 # port of Doug Lea's memory allocator, normally known as
9745 # dlmalloc. dlmalloc has a reputation for being both fast
9746 # and space-conserving, as well as resisting fragmentation well.
9747 # It is a common choice for a general purpose allocator and
9748 # has been used in both newlib and Linux glibc.
9750 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9751 # There is no associated value.
9756 # Doug Lea's malloc implementation has substantial amounts
9757 # of internal checking in order to verify the operation
9758 # and consistency of the allocator. However this imposes
9759 # substantial overhead on each operation. Therefore this
9760 # checking may be individually disabled.
9762 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9764 # No user value, uncomment the following line to provide one.
9766 # value_source default
9767 # Default value: 0 != CYGDBG_USE_ASSERTS
9768 # CYGDBG_USE_ASSERTS == 0
9770 # Requires: CYGDBG_USE_ASSERTS
9771 # CYGDBG_USE_ASSERTS == 0
9776 # With this option enabled, this allocator will be
9777 # made thread-safe. Additionally allocation functions
9778 # are made available that allow a thread to wait
9779 # until memory is available.
9781 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9782 # This option is not active
9783 # ActiveIf constraint: CYGPKG_KERNEL
9784 # CYGPKG_KERNEL (unknown) == 0
9788 # No user value, uncomment the following line to provide one.
9790 # value_source default
9792 # Requires: CYGPKG_KERNEL
9793 # CYGPKG_KERNEL (unknown) == 0
9797 # Support more than one instance
9798 # Having this option disabled allows important
9799 # implementation structures to be declared as a single
9800 # static instance, allowing faster access. However this
9801 # would fail if there is more than one instance of
9802 # the dlmalloc allocator class. Therefore this option can
9803 # be enabled if multiple instances are required. Note: as
9804 # a special case, if this allocator is used as the
9805 # implementation of malloc, and it can be determined there
9806 # is more than one malloc pool, then this option will be
9809 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9811 # No user value, uncomment the following line to provide one.
9813 # value_source default
9817 # Use system memmove() and memset()
9818 # This may be used to control whether memset() and memmove()
9819 # are used within the implementation. The alternative is
9820 # to use some macro equivalents, which some people report
9821 # are faster in some circumstances.
9823 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9825 # No user value, uncomment the following line to provide one.
9827 # value_source default
9828 # Default value: 0 != CYGPKG_ISOINFRA
9829 # CYGPKG_ISOINFRA == current
9831 # Requires: CYGPKG_ISOINFRA
9832 # CYGPKG_ISOINFRA == current
9836 # Minimum alignment of allocated blocks
9837 # This option controls the minimum alignment that the
9838 # allocated memory blocks are aligned on, specified as
9839 # 2^N. Note that using large mininum alignments can lead
9840 # to excessive memory wastage.
9842 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9844 # No user value, uncomment the following line to provide one.
9846 # value_source default
9848 # Legal values: 3 to 10
9852 # Variable block allocator with separate metadata
9853 # This component contains configuration options related to the
9854 # variable block memory allocator with separate metadata.
9856 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9857 # There is no associated value.
9862 # With this option enabled, this allocator will be
9863 # made thread-safe. Additionally allocation functions
9864 # are made available that allow a thread to wait
9865 # until memory is available.
9867 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9868 # This option is not active
9869 # ActiveIf constraint: CYGPKG_KERNEL
9870 # CYGPKG_KERNEL (unknown) == 0
9874 # No user value, uncomment the following line to provide one.
9876 # value_source default
9882 # Kernel C API support for memory allocation
9883 # This option must be enabled to provide the extensions required
9884 # to support integration into the kernel C API.
9886 cdl_option CYGFUN_MEMALLOC_KAPI {
9887 # This option is not active
9888 # ActiveIf constraint: CYGPKG_KERNEL
9889 # CYGPKG_KERNEL (unknown) == 0
9893 # No user value, uncomment the following line to provide one.
9895 # value_source default
9896 # Default value: CYGFUN_KERNEL_API_C
9897 # CYGFUN_KERNEL_API_C (unknown) == 0
9901 # malloc(0) returns NULL
9902 # This option controls the behavior of malloc(0) ( or calloc with
9903 # either argument 0 ). It is permitted by the standard to return
9904 # either a NULL pointer or a unique pointer. Enabling this option
9905 # forces a NULL pointer to be returned.
9907 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9909 # No user value, uncomment the following line to provide one.
9911 # value_source default
9915 # Breakpoint site when running out of memory
9916 # Whenever the system runs out of memory, it invokes this function
9917 # before either going to sleep waiting for memory to become
9918 # available or returning failure.
9920 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9922 # No user value, uncomment the following line to provide one.
9924 # value_source default
9928 # malloc() and supporting allocators
9929 # This component enables support for dynamic memory
9930 # allocation as supplied by the functions malloc(),
9931 # free(), calloc() and realloc(). As these
9932 # functions are often used, but can have quite an
9933 # overhead, disabling them here can ensure they
9934 # cannot even be used accidentally when static
9935 # allocation is preferred. Within this component are
9936 # various allocators that can be selected for use
9937 # as the underlying implementation of the dynamic
9938 # allocation functions.
9940 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9941 # ActiveIf constraint: CYGPKG_ISOINFRA
9942 # CYGPKG_ISOINFRA == current
9946 # No user value, uncomment the following line to provide one.
9948 # value_source default
9953 # Use external heap definition
9954 # This option allows other components in the
9955 # system to override the default system
9956 # provision of heap memory pools. This should
9957 # be set to a header which provides the equivalent
9958 # definitions to <pkgconf/heaps.hxx>.
9960 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9962 # No user value, uncomment the following line to provide one.
9964 # value_source default
9965 # Default value: 0 0
9968 # Use external implementation of joining multiple heaps
9969 # The default implementation of joining multiple heaps
9970 # is fine for the case where there are multiple disjoint
9971 # memory regions of the same type. However, in a system
9972 # there might be e.g. a small amount of internal SRAM and
9973 # a large amount of external DRAM. The SRAM is faster and
9974 # the DRAM is slower. An application can implement some
9975 # heuristic to choose which pool to allocate from. This
9976 # heuristic can be highly application specific.
9978 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
9980 # No user value, uncomment the following line to provide one.
9982 # value_source default
9983 # Default value: 0 0
9986 # malloc() allocator implementations
9988 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
9989 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
9990 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
9991 # This value cannot be modified here.
9994 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9995 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9998 # The following properties are affected by this value
9999 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10000 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10003 # malloc() implementation instantiation data
10004 # Memory allocator implementations that are capable of being
10005 # used underneath malloc() must be instantiated. The code
10006 # to do this is set in this option. It is only intended to
10007 # be set by the implementation, not the user.
10009 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10011 # No user value, uncomment the following line to provide one.
10012 # user_value <cyg/memalloc/dlmalloc.hxx>
10013 # value_source default
10014 # Default value: <cyg/memalloc/dlmalloc.hxx>
10016 # The following properties are affected by this value
10017 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10018 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10019 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10020 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10023 # Simple variable block implementation
10024 # This causes malloc() to use the simple
10025 # variable block allocator.
10027 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10029 # No user value, uncomment the following line to provide one.
10031 # value_source default
10033 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10034 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10036 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10037 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10041 # Doug Lea's malloc implementation
10042 # This causes malloc() to use a version of Doug Lea's
10043 # malloc (dlmalloc) as the underlying implementation.
10045 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10047 # No user value, uncomment the following line to provide one.
10049 # value_source default
10051 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10052 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10057 # Size of the fallback dynamic memory pool in bytes
10058 # If *no* heaps are configured in your memory layout,
10059 # dynamic memory allocation by
10060 # malloc() and calloc() must be from a fixed-size,
10061 # contiguous memory pool (note here that it is the
10062 # pool that is of a fixed size, but malloc() is still
10063 # able to allocate variable sized chunks of memory
10064 # from it). This option is the size
10065 # of that pool, in bytes. Note that not all of
10066 # this is available for programs to
10067 # use - some is needed for internal information
10068 # about memory regions, and some may be lost to
10069 # ensure that memory allocation only returns
10070 # memory aligned on word (or double word)
10071 # boundaries - a very common architecture
10074 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10076 # No user value, uncomment the following line to provide one.
10078 # value_source default
10079 # Default value: 16384
10080 # Legal values: 32 to 0x7fffffff
10083 # Common memory allocator package build options
10084 # Package specific build options including control over
10085 # compiler flags used only in building this package,
10086 # and details of which tests are built.
10088 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10089 # There is no associated value.
10093 # Additional compiler flags
10094 # This option modifies the set of compiler flags for
10095 # building this package. These flags are used in addition
10096 # to the set of global flags.
10098 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10100 # No user value, uncomment the following line to provide one.
10101 # user_value "-fno-rtti -Woverloaded-virtual"
10102 # value_source default
10103 # Default value: "-fno-rtti -Woverloaded-virtual"
10106 # Suppressed compiler flags
10107 # This option modifies the set of compiler flags for
10108 # building this package. These flags are removed from
10109 # the set of global flags if present.
10111 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10113 # No user value, uncomment the following line to provide one.
10114 # user_value -Wno-pointer-sign
10115 # value_source default
10116 # Default value: -Wno-pointer-sign
10120 # This option specifies the set of tests for this package.
10122 cdl_option CYGPKG_MEMALLOC_TESTS {
10123 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10125 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10130 # Common error code support
10131 # This package contains the common list of error and
10132 # status codes. It is held centrally to allow
10133 # packages to interchange error codes and status
10134 # codes in a common way, rather than each package
10135 # having its own conventions for error/status
10136 # reporting. The error codes are modelled on the
10137 # POSIX style naming e.g. EINVAL etc. This package
10138 # also provides the standard strerror() function to
10139 # convert error codes to textual representation, as
10140 # well as an implementation of the errno idiom.
10142 cdl_package CYGPKG_ERROR {
10143 # Packages cannot be added or removed, nor can their version be changed,
10144 # simply by editing their value. Instead the appropriate configuration
10145 # should be used to perform these actions.
10147 # This value cannot be modified here.
10149 # Current value: 1 current
10150 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10151 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10157 # This package controls the behaviour of the
10158 # errno variable (or more strictly, expression)
10161 cdl_component CYGPKG_ERROR_ERRNO {
10163 # No user value, uncomment the following line to provide one.
10165 # value_source default
10167 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10168 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10174 # This option controls whether the standard error
10175 # code reporting variable errno is a per-thread
10176 # variable, rather than global.
10178 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10180 # No user value, uncomment the following line to provide one.
10182 # The inferred value should not be edited directly.
10184 # value_source inferred
10186 # Requires: CYGVAR_KERNEL_THREADS_DATA
10187 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10192 # Trace verbosity level for debugging the errno
10193 # retrieval mechanism in errno.cxx. Increase this
10194 # value to get additional trace output.
10196 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10198 # No user value, uncomment the following line to provide one.
10200 # value_source default
10202 # Legal values: 0 to 1
10206 # strerror function
10207 # This package controls the presence and behaviour of the
10208 # strerror() function from <string.h>
10210 cdl_option CYGPKG_ERROR_STRERROR {
10212 # No user value, uncomment the following line to provide one.
10214 # value_source default
10216 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10217 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10221 # Error package build options
10222 # Package specific build options including control over
10223 # compiler flags used only in building this package,
10224 # and details of which tests are built.
10226 cdl_component CYGPKG_ERROR_OPTIONS {
10227 # There is no associated value.
10231 # Additional compiler flags
10232 # This option modifies the set of compiler flags for
10233 # building the error package. These flags are used in addition
10234 # to the set of global flags.
10236 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10238 # No user value, uncomment the following line to provide one.
10240 # value_source default
10241 # Default value: ""
10244 # Suppressed compiler flags
10245 # This option modifies the set of compiler flags for
10246 # building the error package. These flags are removed from
10247 # the set of global flags if present.
10249 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10251 # No user value, uncomment the following line to provide one.
10253 # value_source default
10254 # Default value: ""