1 # ====================================================================
3 # netarm_eth_driver.cdl
6 # NET+ARM ethernet interface
8 # ====================================================================
9 #####ECOSGPLCOPYRIGHTBEGIN####
10 ## -------------------------------------------
11 ## This file is part of eCos, the Embedded Configurable Operating System.
12 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
14 ## eCos is free software; you can redistribute it and/or modify it under
15 ## the terms of the GNU General Public License as published by the Free
16 ## Software Foundation; either version 2 or (at your option) any later version.
18 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
23 ## You should have received a copy of the GNU General Public License along
24 ## with eCos; if not, write to the Free Software Foundation, Inc.,
25 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
27 ## As a special exception, if other files instantiate templates or use macros
28 ## or inline functions from this file, or you compile this file and link it
29 ## with other works to produce a work based on this file, this file does not
30 ## by itself cause the resulting work to be covered by the GNU General Public
31 ## License. However the source code for this file must still be made available
32 ## in accordance with section (3) of the GNU General Public License.
34 ## This exception does not invalidate any other reasons why a work based on
35 ## this file might be covered by the GNU General Public License.
37 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38 ## at http://sources.redhat.com/ecos/ecos-license/
39 ## -------------------------------------------
40 #####ECOSGPLCOPYRIGHTEND####
41 # ====================================================================
42 ######DESCRIPTIONBEGIN####
44 # Author(s): Harald Brandl (harald.brandl@fh-joanneum.at)
49 #####DESCRIPTIONEND####
51 # ====================================================================
53 cdl_package CYGPKG_DEVS_ETH_ARM_NETARM {
54 display "NetSilicon board ethernet driver"
55 description "Ethernet driver for NET+ARM."
57 parent CYGPKG_IO_ETH_DRIVERS
58 active_if CYGPKG_IO_ETH_DRIVERS
62 compile -library=libextras.a MII.c netarm_eth_drv.c eeprom.c
65 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
66 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_NETARM_CFG <pkgconf/devs_eth_arm_netarm.h>"
67 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
70 cdl_interface CYGSEM_DEVS_ETH_ARM_NETARM_ETH0_ESA {
72 requires 1 == CYGSEM_DEVS_ETH_ARM_NETARM_ETH0_ESA
75 cdl_component CYGPKG_DEVS_ETH_ARM_NETARM_ETH0 {
76 display "Ethernet port 0 driver"
80 implements CYGHWR_NET_DRIVERS
81 implements CYGHWR_NET_DRIVER_ETH0
83 cdl_option CYGDAT_DEVS_ETH_ARM_NETARM_ETH0_NAME {
84 display "Device name for the ETH0 ethernet port 0 driver"
86 default_value {"\"eth0\""}
88 This option sets the name of the ethernet device for the
89 netarm ethernet port 0."
92 cdl_component CYGSEM_DEVS_ETH_ARM_NETARM_ETH0_SET_ESA {
93 display "Set the ethernet station address"
96 implements CYGSEM_DEVS_ETH_ARM_NETARM_ETH0_ESA
97 description "Enabling this option will allow the ethernet
98 station address to be forced to the value set by the
99 configuration. This may be required if the hardware does
100 not include a serial EEPROM for the ESA."
102 cdl_option CYGDAT_DEVS_ETH_ARM_NETARM_ETH0_ESA {
103 display "The ethernet station address"
105 default_value {"{0x00, 0x40, 0xaf, 0x77, 0xe0, 0x80}"}
106 description "The ethernet station address"
110 cdl_option CYGDAT_DEVS_ETH_ARM_NETARM_ETH0_ESA_EEPROM {
111 display "Read ethernet station address from eeprom"
114 implements CYGSEM_DEVS_ETH_ARM_NETARM_ETH0_ESA
115 description "Read ethernet station address from eeprom (I2C)"
118 cdl_component CYGPKG_DEVS_ETH_ARM_NETARM_OPTIONS {
119 display "NETARM ethernet driver build options"
123 cdl_option CYGPKG_DEVS_ETH_ARM_NETARM_CFLAGS_ADD {
124 display "Additional compiler flags"
127 default_value { "-D_KERNEL -D__ECOS" }
129 This option modifies the set of compiler flags for
130 building the NETARM ethernet driver
131 package. These flags are used in addition to the set of
138 # EOF netarm_eth_driver.cdl