1 # ====================================================================
3 # h8300_aki3068net_eth_drivers.cdl
5 # Ethernet drivers - support for DP83902A(RTL8019AS)
6 # ethernet controller on the Akizuki H8/3068 Network micom.
8 # ====================================================================
9 #####ECOSGPLCOPYRIGHTBEGIN####
10 ## -------------------------------------------
11 ## This file is part of eCos, the Embedded Configurable Operating System.
12 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
14 ## eCos is free software; you can redistribute it and/or modify it under
15 ## the terms of the GNU General Public License as published by the Free
16 ## Software Foundation; either version 2 or (at your option) any later version.
18 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
23 ## You should have received a copy of the GNU General Public License along
24 ## with eCos; if not, write to the Free Software Foundation, Inc.,
25 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
27 ## As a special exception, if other files instantiate templates or use macros
28 ## or inline functions from this file, or you compile this file and link it
29 ## with other works to produce a work based on this file, this file does not
30 ## by itself cause the resulting work to be covered by the GNU General Public
31 ## License. However the source code for this file must still be made available
32 ## in accordance with section (3) of the GNU General Public License.
34 ## This exception does not invalidate any other reasons why a work based on
35 ## this file might be covered by the GNU General Public License.
37 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38 ## at http://sources.redhat.com/ecos/ecos-license/
39 ## -------------------------------------------
40 #####ECOSGPLCOPYRIGHTEND####
41 # ====================================================================
42 ######DESCRIPTIONBEGIN####
48 #####DESCRIPTIONEND####
50 # ====================================================================
52 cdl_package CYGPKG_DEVS_ETH_H8300_AKI3068NET {
53 display "aki3068net board ethernet driver"
55 Ethernet driver for Akizuki
56 H8/3068 Netwotk Micom board"
58 parent CYGPKG_IO_ETH_DRIVERS
59 active_if CYGPKG_IO_ETH_DRIVERS
60 active_if CYGPKG_HAL_H8300_H8300H_AKI3068NET
61 compile -library=libextras.a if_aki3068net.c
65 # FIXME: This really belongs in the NS DP83902A package
66 cdl_interface CYGINT_DEVS_ETH_NS_DP83902A_REQUIRED {
67 display "NS dp83902a ethernet driver required"
71 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
72 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_NS_DP83902A_INL <cyg/io/devs_eth_h8300_aki3068net.inl>"
73 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_NS_DP83902A_CFG <pkgconf/devs_eth_h8300_aki3068net.h>"
74 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
77 cdl_component CYGPKG_DEVS_ETH_H8300_AKI3068NET_ETH0 {
78 display "Ethernet port 0 driver"
82 implements CYGHWR_NET_DRIVERS
83 implements CYGHWR_NET_DRIVER_ETH0
85 implements CYGINT_DEVS_ETH_NS_DP83902A_REQUIRED
87 cdl_option CYGDAT_DEVS_ETH_H8300_AKI3068NET_ETH0_NAME {
88 display "Device name for the ETH0 ethernet port 0 driver"
90 default_value {"\"eth0\""}
92 This option sets the name of the ethernet device for the
93 RTL8019AS ethernet port 0."
96 cdl_component CYGSEM_DEVS_ETH_H8300_AKI3068NET_ETH0_SET_ESA {
97 display "Set the ethernet station address"
100 description "Enabling this option will allow the ethernet
101 station address to be forced to the value set by the
102 configuration. This may be required if the hardware does
103 not include a serial EEPROM for the ESA."
105 cdl_option CYGDAT_DEVS_ETH_H8300_AKI3068NET_ETH0_ESA {
106 display "The ethernet station address"
108 default_value {"{0x08, 0x00, 0x00, 0x00, 0x00, 0x01}"}
109 description "The ethernet station address"
114 cdl_component CYGPKG_DEVS_ETH_H8300_AKI3068NET_OPTIONS {
115 display "PCMCIA ethernet driver build options"
119 cdl_option CYGPKG_DEVS_ETH_CF_CFLAGS_ADD {
120 display "Additional compiler flags"
123 default_value { "-D_KERNEL -D__ECOS" }
125 This option modifies the set of compiler flags for
126 building the PCMCIA ethernet driver package.
127 These flags are used in addition
128 to the set of global flags."