1 # ====================================================================
3 # se7751_eth_drivers.cdl
5 # Ethernet drivers - support for AMD PCnet ethernet controller
6 # on the Hitachi SE7751 board.
8 # ====================================================================
9 #####ECOSGPLCOPYRIGHTBEGIN####
10 ## -------------------------------------------
11 ## This file is part of eCos, the Embedded Configurable Operating System.
12 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
14 ## eCos is free software; you can redistribute it and/or modify it under
15 ## the terms of the GNU General Public License as published by the Free
16 ## Software Foundation; either version 2 or (at your option) any later version.
18 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
23 ## You should have received a copy of the GNU General Public License along
24 ## with eCos; if not, write to the Free Software Foundation, Inc.,
25 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
27 ## As a special exception, if other files instantiate templates or use macros
28 ## or inline functions from this file, or you compile this file and link it
29 ## with other works to produce a work based on this file, this file does not
30 ## by itself cause the resulting work to be covered by the GNU General Public
31 ## License. However the source code for this file must still be made available
32 ## in accordance with section (3) of the GNU General Public License.
34 ## This exception does not invalidate any other reasons why a work based on
35 ## this file might be covered by the GNU General Public License.
37 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38 ## at http://sources.redhat.com/ecos/ecos-license/
39 ## -------------------------------------------
40 #####ECOSGPLCOPYRIGHTEND####
41 # ====================================================================
42 ######DESCRIPTIONBEGIN####
48 #####DESCRIPTIONEND####
50 # ====================================================================
52 cdl_package CYGPKG_DEVS_ETH_SH_SE7751 {
53 display "Hitachi SE7751 board ethernet driver"
54 description "Ethernet driver for Hitachi SE7751 board."
56 parent CYGPKG_IO_ETH_DRIVERS
57 active_if CYGPKG_IO_ETH_DRIVERS
58 active_if CYGPKG_HAL_SH_SH7751_SE7751
62 # FIXME: This really belongs in the AMD_PCNET package
63 cdl_interface CYGINT_DEVS_ETH_AMD_PCNET_REQUIRED {
64 display "AMD PCNET ethernet driver required"
68 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
69 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_AMD_PCNET_INL <cyg/io/devs_eth_sh_se7751.inl>"
70 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_AMD_PCNET_CFG <pkgconf/devs_eth_sh_se7751.h>"
71 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
74 cdl_component CYGPKG_DEVS_ETH_SH_SE7751_ETH0 {
75 display "SE7751 ethernet port 0 driver"
79 This option includes the ethernet device driver for the
82 implements CYGHWR_NET_DRIVERS
83 implements CYGHWR_NET_DRIVER_ETH0
84 implements CYGINT_DEVS_ETH_AMD_PCNET_REQUIRED
86 cdl_option CYGNUM_DEVS_ETH_SH_SE7751_ETH0_RX_RING_SIZE {
87 display "Size of RX ring for ETH0"
90 legal_values { 4 8 16 32 64 128 }
92 This option sets the size of the RX ring."
95 cdl_option CYGNUM_DEVS_ETH_SH_SE7751_ETH0_TX_RING_SIZE {
96 display "Size of TX ring for ETH0"
99 legal_values { 4 8 16 32 64 128 }
101 This option sets the size of the TX ring."
104 cdl_option CYGDAT_DEVS_ETH_SH_SE7751_ETH0_NAME {
105 display "Device name for the ETH0 ethernet port 0 driver"
107 default_value {"\"eth0\""}
109 This option sets the name of the ethernet device for the
113 cdl_component CYGSEM_DEVS_ETH_SH_SE7751_ETH0_SET_ESA {
114 display "Set the ethernet station address"
117 description "Enabling this option will allow the ethernet
118 station address to be forced to the value set by the
119 configuration. This may be required if the hardware does
120 not include a serial EEPROM for the ESA."
122 cdl_option CYGDAT_DEVS_ETH_SH_SE7751_ETH0_ESA {
123 display "The ethernet station address"
125 default_value {"{0x08, 0x88, 0x12, 0x34, 0x56, 0x78}"}
126 description "The ethernet station address"