ARM: zynq: move SoC sources to mach-zynq Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/* Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
zynq: slcr: Disable all level shifters Disable all level shifters before enabling the PS-to-PL level shifters as it would be good to disable all level shifters before enabling the PS-to-PL in order to ensure that it is in proper state Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: slcr: Dont modify the reserved bits Set only the 0-3 bits of the FPGA_RST_CTRL register as other bits should not be set to 1. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: ehci: Added USB host driver support Added USB host driver for zynq. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: Add MIO detection code Add run-time MIO pin detection to get actual pin configuration for specific periphery. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: Setup correct slcr_lock value The driver should setup slcr state according to slcr operations. Reported-by: Andrey Filippov <andrey@elphel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: slcr: Fix incorrect commentary Fix c&p error in zynq_slcr_devcfg_enable() commentary and extending it with description according to Zynq TRM also in zynq_slcr_devcfg_disable(). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: Fix sparse warnings in slcr.c Warnings: arch/arm/cpu/armv7/zynq/slcr.c:21:6: warning: symbol 'zynq_slcr_lock' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:27:6: warning: symbol 'zynq_slcr_unlock' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:34:6: warning: symbol 'zynq_slcr_cpu_reset' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:54:6: warning: symbol 'zynq_slcr_gem_clk_setup' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:81:6: warning: symbol 'zynq_slcr_devcfg_disable' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:94:6: warning: symbol 'zynq_slcr_devcfg_enable' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:107:5: warning: symbol 'zynq_slcr_get_boot_mode' was not declared. Should it be static? arch/arm/cpu/armv7/zynq/slcr.c:113:5: warning: symbol 'zynq_slcr_get_idcode' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
net: zynq_gem: Calculate clock dividers dynamically Remove hard coded clock divider setting and use the Zynq clock framework to dynamically calculate appropriate dividers at run time. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
net: zynq_gem: Move RCLK details out of driver The GEM driver should not need to know about Zynq specific details of RCLK related registers and bitfields in the SLCR. Move those details to the slcr driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
zynq: Add support to find bootmode Added support to find the bootmodes by reading slcr bootmode register. this can be helpful to autoboot the configurations w.r.t a specified bootmode. Added this functionality on board_late_init as it's not needed for normal initializtion part. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
zynq: slcr: Wait 100ms till clk is properly setup If you don't wait you will loose the first sent packet even all bits in emacps are correctly setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
fpga: zynq: Add support for loading bitstream Devcfg device requires to load bitstream in binary format. But u-boot also has an option for loading bitstream in bit format. Let's handle both cases by zynqpl driver. Also add suport for loading partial bitstreams. The first driver version was done by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
net: gem: Fix gem driver on 1Gbps LAN The whole driver used 100Mbps because of zc702 rev B. Fix problem with not setup proper clock for gem1. This is generic approach for clk setup. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
arm: zynq: Add SLCR support with system reset The patch provides slcr base address initialization support and a support to reset the cpu through slcr driver, hence removed the reset_cpu() from board.c. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>