MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -b BOARD,  --board BOARD     Build all boards with board name BOARD
  22           -l,        --list            List all targets to be built
  23           -m,        --maintainers     List all targets and maintainer email
  24           -M,        --mails           List all targets and all affilated emails
  25           -C,        --check           Enable build checking
  26           -n,        --continue        Continue (skip boards already built)
  27           -r,        --rebuild-errors  Rebuild any boards that errored
  28           -h,        --help            This help output
  29
  30         Selections by these options are logically ANDed; if the same option
  31         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  32         will select all configurations where the vendor is either FOO or
  33         BAR.  Any additional arguments specified on the command line are
  34         always build additionally.  See the boards.cfg file for more info.
  35
  36         If no boards are specified, then the default is "powerpc".
  37
  38         Environment variables:
  39           BUILD_NCPUS      number of parallel make jobs (default: auto)
  40           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  41           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  42                            architecture "ARCH".  Substitute "ARCH" for any
  43                            supported architecture (default: "")
  44           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  45           BUILD_DIR        output build directory (default: ./)
  46           BUILD_NBUILDS    number of parallel targets (default: 1)
  47
  48         Examples:
  49           - build all Power Architecture boards:
  50               MAKEALL -a powerpc
  51               MAKEALL --arch powerpc
  52               MAKEALL powerpc
  53           - build all PowerPC boards manufactured by vendor "esd":
  54               MAKEALL -a powerpc -v esd
  55           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  56               MAKEALL -a powerpc -v keymile -v siemens
  57           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  58               MAKEALL -c mpc83xx -v freescale 4xx
  59         EOF
  60         exit ${ret}
  61 }
  62
  63 SHORT_OPTS="ha:c:v:s:b:lmMCnr"
  64 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
  65
  66 # Option processing based on util-linux-2.13/getopt-parse.bash
  67
  68 # Note that we use `"$@"' to let each command-line parameter expand to a
  69 # separate word. The quotes around `$@' are essential!
  70 # We need TEMP as the `eval set --' would nuke the return value of
  71 # getopt.
  72 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  73      -n 'MAKEALL' -- "$@"`
  74
  75 [ $? != 0 ] && usage 1
  76
  77 # Note the quotes around `$TEMP': they are essential!
  78 eval set -- "$TEMP"
  79
  80 SELECTED=''
  81 ONLY_LIST=''
  82 PRINT_MAINTS=''
  83 MAINTAINERS_ONLY=''
  84 CONTINUE=''
  85 REBUILD_ERRORS=''
  86
  87 while true ; do
  88         case "$1" in
  89         -a|--arch)
  90                 # echo "Option ARCH: argument \`$2'"
  91                 if [ "$opt_a" ] ; then
  92                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  93                 else
  94                         opt_a="(\$2 == \"$2\")"
  95                 fi
  96                 SELECTED='y'
  97                 shift 2 ;;
  98         -c|--cpu)
  99                 # echo "Option CPU: argument \`$2'"
 100                 if [ "$opt_c" ] ; then
 101                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 102                 else
 103                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 104                 fi
 105                 SELECTED='y'
 106                 shift 2 ;;
 107         -s|--soc)
 108                 # echo "Option SoC: argument \`$2'"
 109                 if [ "$opt_s" ] ; then
 110                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 111                 else
 112                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 113                 fi
 114                 SELECTED='y'
 115                 shift 2 ;;
 116         -v|--vendor)
 117                 # echo "Option VENDOR: argument \`$2'"
 118                 if [ "$opt_v" ] ; then
 119                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 120                 else
 121                         opt_v="(\$5 == \"$2\")"
 122                 fi
 123                 SELECTED='y'
 124                 shift 2 ;;
 125         -b|--board)
 126                 # echo "Option BOARD: argument \`$2'"
 127                 if [ "$opt_b" ] ; then
 128                         opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
 129                 else
 130                         # We need to check the 7th field too
 131                         # for boards whose 6th field is "-"
 132                         opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
 133                 fi
 134                 SELECTED='y'
 135                 shift 2 ;;
 136         -C|--check)
 137                 CHECK='C=1'
 138                 shift ;;
 139         -n|--continue)
 140                 CONTINUE='y'
 141                 shift ;;
 142         -r|--rebuild-errors)
 143                 REBUILD_ERRORS='y'
 144                 shift ;;
 145         -l|--list)
 146                 ONLY_LIST='y'
 147                 shift ;;
 148         -m|--maintainers)
 149                 ONLY_LIST='y'
 150                 PRINT_MAINTS='y'
 151                 MAINTAINERS_ONLY='y'
 152                 shift ;;
 153         -M|--mails)
 154                 ONLY_LIST='y'
 155                 PRINT_MAINTS='y'
 156                 shift ;;
 157         -h|--help)
 158                 usage ;;
 159         --)
 160                 shift ; break ;;
 161         *)
 162                 echo "Internal error!" >&2 ; exit 1 ;;
 163         esac
 164 done
 165 # echo "Remaining arguments:"
 166 # for arg do echo '--> '"\`$arg'" ; done
 167
 168 FILTER="\$1 !~ /^#/"
 169 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 170 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 171 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 172 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 173 [ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
 174
 175 if [ "$SELECTED" ] ; then
 176         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 177
 178         # Make sure some boards from boards.cfg are actually found
 179         if [ -z "$SELECTED" ] ; then
 180                 echo "Error: No boards selected, invalid arguments"
 181                 exit 1
 182         fi
 183 fi
 184
 185 #########################################################################
 186
 187 # Print statistics when we exit
 188 trap exit 1 2 3 15
 189 trap print_stats 0
 190
 191 # Determine number of CPU cores if no default was set
 192 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 193
 194 if [ "$BUILD_NCPUS" -gt 1 ]
 195 then
 196         JOBS="-j $((BUILD_NCPUS + 1))"
 197 else
 198         JOBS=""
 199 fi
 200
 201 if [ "${MAKEALL_LOGDIR}" ] ; then
 202         LOG_DIR=${MAKEALL_LOGDIR}
 203 else
 204         LOG_DIR="LOG"
 205 fi
 206
 207 : ${BUILD_NBUILDS:=1}
 208 BUILD_MANY=0
 209
 210 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 211         BUILD_MANY=1
 212         : ${BUILD_DIR:=./build}
 213         mkdir -p "${BUILD_DIR}/ERR"
 214         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 215 fi
 216
 217 : ${BUILD_DIR:=.}
 218
 219 OUTPUT_PREFIX="${BUILD_DIR}"
 220
 221 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 222 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 223         find "${LOG_DIR}/" -type f -exec rm -f {} +
 224 fi
 225
 226 LIST=""
 227
 228 # Keep track of the number of builds and errors
 229 ERR_CNT=0
 230 ERR_LIST=""
 231 WRN_CNT=0
 232 WRN_LIST=""
 233 TOTAL_CNT=0
 234 SKIP_CNT=0
 235 CURRENT_CNT=0
 236 OLDEST_IDX=1
 237 RC=0
 238
 239 # Helper funcs for parsing boards.cfg
 240 targets_by_field()
 241 {
 242         field=$1
 243         regexp=$2
 244
 245         awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
 246                                                                 boards.cfg
 247 }
 248
 249 targets_by_arch() { targets_by_field 2 "$@" ; }
 250 targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
 251 targets_by_soc()  { targets_by_field 4 "$@" ; }
 252
 253 #########################################################################
 254 ## MPC5xx Systems
 255 #########################################################################
 256
 257 LIST_5xx="$(targets_by_cpu mpc5xx)"
 258
 259 #########################################################################
 260 ## MPC5xxx Systems
 261 #########################################################################
 262
 263 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
 264
 265 #########################################################################
 266 ## MPC512x Systems
 267 #########################################################################
 268
 269 LIST_512x="$(targets_by_cpu mpc512x)"
 270
 271 #########################################################################
 272 ## MPC8xx Systems
 273 #########################################################################
 274
 275 LIST_8xx="$(targets_by_cpu mpc8xx)"
 276
 277 #########################################################################
 278 ## PPC4xx Systems
 279 #########################################################################
 280
 281 LIST_4xx="$(targets_by_cpu ppc4xx)"
 282
 283 #########################################################################
 284 ## MPC824x Systems
 285 #########################################################################
 286
 287 LIST_824x="$(targets_by_cpu mpc824x)"
 288
 289 #########################################################################
 290 ## MPC8260 Systems (includes 8250, 8255 etc.)
 291 #########################################################################
 292
 293 LIST_8260="$(targets_by_cpu mpc8260)"
 294
 295 #########################################################################
 296 ## MPC83xx Systems (includes 8349, etc.)
 297 #########################################################################
 298
 299 LIST_83xx="$(targets_by_cpu mpc83xx)"
 300
 301 #########################################################################
 302 ## MPC85xx Systems (includes 8540, 8560 etc.)
 303 #########################################################################
 304
 305 LIST_85xx="$(targets_by_cpu mpc85xx)"
 306
 307 #########################################################################
 308 ## MPC86xx Systems
 309 #########################################################################
 310
 311 LIST_86xx="$(targets_by_cpu mpc86xx)"
 312
 313 #########################################################################
 314 ## 74xx/7xx Systems
 315 #########################################################################
 316
 317 LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
 318
 319 #########################################################################
 320 ## PowerPC groups
 321 #########################################################################
 322
 323 LIST_TSEC="             \
 324         ${LIST_83xx}    \
 325         ${LIST_85xx}    \
 326         ${LIST_86xx}    \
 327 "
 328
 329 LIST_powerpc="          \
 330         ${LIST_5xx}     \
 331         ${LIST_512x}    \
 332         ${LIST_5xxx}    \
 333         ${LIST_8xx}     \
 334         ${LIST_824x}    \
 335         ${LIST_8260}    \
 336         ${LIST_83xx}    \
 337         ${LIST_85xx}    \
 338         ${LIST_86xx}    \
 339         ${LIST_4xx}     \
 340         ${LIST_74xx_7xx}\
 341 "
 342
 343 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 344 # still using "ppc" instead of "powerpc"
 345 LIST_ppc="              \
 346         ${LIST_powerpc} \
 347 "
 348
 349 #########################################################################
 350 ## StrongARM Systems
 351 #########################################################################
 352
 353 LIST_SA="$(targets_by_cpu sa1100)"
 354
 355 #########################################################################
 356 ## ARM7 Systems
 357 #########################################################################
 358
 359 LIST_ARM7="$(targets_by_cpu arm720t)"
 360
 361 #########################################################################
 362 ## ARM9 Systems
 363 #########################################################################
 364
 365 LIST_ARM9="$(targets_by_cpu arm920t)    \
 366         $(targets_by_cpu arm926ejs)     \
 367         $(targets_by_cpu arm946es)      \
 368 "
 369
 370 #########################################################################
 371 ## ARM11 Systems
 372 #########################################################################
 373 LIST_ARM11="$(targets_by_cpu arm1136)   \
 374         $(targets_by_cpu arm1176)       \
 375 "
 376
 377 #########################################################################
 378 ## ARMV7 Systems
 379 #########################################################################
 380
 381 LIST_ARMV7="$(targets_by_cpu armv7)"
 382
 383 #########################################################################
 384 ## ARMV8 Systems
 385 #########################################################################
 386
 387 LIST_ARMV8="$(targets_by_cpu armv8)"
 388
 389 #########################################################################
 390 ## AT91 Systems
 391 #########################################################################
 392
 393 LIST_at91="$(targets_by_soc at91)"
 394
 395 #########################################################################
 396 ## Xscale Systems
 397 #########################################################################
 398
 399 LIST_pxa="$(targets_by_cpu pxa)"
 400
 401 #########################################################################
 402 ## SPEAr Systems
 403 #########################################################################
 404
 405 LIST_spear="$(targets_by_soc spear)"
 406
 407 #########################################################################
 408 ## ARM groups
 409 #########################################################################
 410
 411 LIST_arm="$(targets_by_arch arm |               \
 412         for ARMV8_TARGET in $LIST_ARMV8;        \
 413                 do sed "/$ARMV8_TARGET/d";      \
 414         done)                                   \
 415 "
 416
 417 #########################################################################
 418 ## MIPS Systems         (default = big endian)
 419 #########################################################################
 420
 421 LIST_mips4kc="          \
 422         incaip          \
 423         incaip_100MHz   \
 424         incaip_133MHz   \
 425         incaip_150MHz   \
 426         qemu_mips       \
 427         vct_platinum    \
 428         vct_platinum_small      \
 429         vct_platinum_onenand    \
 430         vct_platinum_onenand_small      \
 431         vct_platinumavc \
 432         vct_platinumavc_small   \
 433         vct_platinumavc_onenand \
 434         vct_platinumavc_onenand_small   \
 435         vct_premium     \
 436         vct_premium_small       \
 437         vct_premium_onenand     \
 438         vct_premium_onenand_small       \
 439 "
 440
 441 LIST_au1xx0="           \
 442         dbau1000        \
 443         dbau1100        \
 444         dbau1500        \
 445         dbau1550        \
 446 "
 447
 448 LIST_mips="             \
 449         ${LIST_mips4kc} \
 450         ${LIST_mips5kc} \
 451         ${LIST_au1xx0}  \
 452 "
 453
 454 #########################################################################
 455 ## MIPS Systems         (little endian)
 456 #########################################################################
 457
 458 LIST_au1xx0_el="        \
 459         dbau1550_el     \
 460         pb1000          \
 461 "
 462 LIST_mips_el="                  \
 463         ${LIST_au1xx0_el}       \
 464 "
 465 #########################################################################
 466 ## OpenRISC Systems
 467 #########################################################################
 468
 469 LIST_openrisc="$(targets_by_arch openrisc)"
 470
 471 #########################################################################
 472 ## x86 Systems
 473 #########################################################################
 474
 475 LIST_x86="$(targets_by_arch x86)"
 476
 477 #########################################################################
 478 ## Nios-II Systems
 479 #########################################################################
 480
 481 LIST_nios2="$(targets_by_arch nios2)"
 482
 483 #########################################################################
 484 ## MicroBlaze Systems
 485 #########################################################################
 486
 487 LIST_microblaze="$(targets_by_arch microblaze)"
 488
 489 #########################################################################
 490 ## ColdFire Systems
 491 #########################################################################
 492
 493 LIST_m68k="$(targets_by_arch m68k)"
 494 LIST_coldfire=${LIST_m68k}
 495
 496 #########################################################################
 497 ## AVR32 Systems
 498 #########################################################################
 499
 500 LIST_avr32="$(targets_by_arch avr32)"
 501
 502 #########################################################################
 503 ## Blackfin Systems
 504 #########################################################################
 505
 506 LIST_blackfin="$(targets_by_arch blackfin)"
 507
 508 #########################################################################
 509 ## SH Systems
 510 #########################################################################
 511
 512 LIST_sh2="$(targets_by_cpu sh2)"
 513 LIST_sh3="$(targets_by_cpu sh3)"
 514 LIST_sh4="$(targets_by_cpu sh4)"
 515
 516 LIST_sh="$(targets_by_arch sh)"
 517
 518 #########################################################################
 519 ## SPARC Systems
 520 #########################################################################
 521
 522 LIST_sparc="$(targets_by_arch sparc)"
 523
 524 #########################################################################
 525 ## NDS32 Systems
 526 #########################################################################
 527
 528 LIST_nds32="$(targets_by_arch nds32)"
 529
 530 #-----------------------------------------------------------------------
 531
 532 get_target_location() {
 533         local target=$1
 534         local BOARD_NAME=""
 535         local CONFIG_NAME=""
 536         local board=""
 537         local vendor=""
 538
 539         # Automatic mode
 540         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 541         if [ -z "${line}" ] ; then echo "" ; return ; fi
 542
 543         set ${line}
 544
 545         CONFIG_NAME="${7%_config}"
 546
 547         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 548
 549         if [ $# -gt 5 ]; then
 550                 if [ "$6" = "-" ] ; then
 551                         board=${BOARD_NAME}
 552                 else
 553                         board="$6"
 554                 fi
 555         fi
 556
 557         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 558         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 559                 tmp="${8%:*}"
 560                 if [ "$tmp" ] ; then
 561                         CONFIG_NAME="$tmp"
 562                 fi
 563         }
 564
 565         # Assign board directory to BOARDIR variable
 566         if [ "${vendor}" == "-" ] ; then
 567             BOARDDIR=${board}
 568         else
 569             BOARDDIR=${vendor}/${board}
 570         fi
 571
 572         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 573 }
 574
 575 get_target_maintainers() {
 576         local name=`echo $1 | cut -d : -f 3`
 577
 578         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 579         if [ -z "${line}" ]; then
 580                 echo ""
 581                 return ;
 582         fi
 583
 584         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 585         [ "$mails" == "-" ] && mails=""
 586         echo "$mails"
 587 }
 588
 589 get_target_arch() {
 590         local target=$1
 591
 592         # Automatic mode
 593         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 594
 595         if [ -z "${line}" ] ; then echo "" ; return ; fi
 596
 597         set ${line}
 598         echo "$2"
 599 }
 600
 601 list_target() {
 602         if [ "$PRINT_MAINTS" != 'y' ] ; then
 603                 echo "$1"
 604                 return
 605         fi
 606
 607         echo -n "$1:"
 608
 609         local loc=`get_target_location $1`
 610
 611         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 612
 613         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 614
 615         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 616
 617                 local dir=`echo ${loc} | cut -d ":" -f 2`
 618                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 619                 local git_result=`git log --format=%aE board/${dir} \
 620                                 include/configs/${cfg}.h | grep "@"`
 621                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 622                                                 head -n 3`
 623                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 624                         sort | uniq -c | sort -nr | head -n 3 | \
 625                         sed "s/^ \+[0-9]\+ \+//"`
 626
 627                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 628                         sort -u | tr "\n" " " | sed "s/ $//" ;
 629         else
 630                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 631                                                 sed "s/ $//" ;
 632         fi
 633
 634         echo ""
 635 }
 636
 637 # Each finished build will have a file called ${donep}${n},
 638 # where n is the index of the build. Each build
 639 # we've already noted as finished will have ${skipp}${n}.
 640 # The code managing the build process will use this information
 641 # to ensure that only BUILD_NBUILDS builds are in flight at once
 642 donep="${LOG_DIR}/._done_"
 643 skipp="${LOG_DIR}/._skip_"
 644
 645 build_target_killed() {
 646         echo "Aborted $target build."
 647         # Remove the logs for this board since it was aborted
 648         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 649         exit
 650 }
 651
 652 build_target() {
 653         target=$1
 654         build_idx=$2
 655
 656         if [ "$ONLY_LIST" == 'y' ] ; then
 657                 list_target ${target}
 658                 return
 659         fi
 660
 661         if [ $BUILD_MANY == 1 ] ; then
 662                 output_dir="${OUTPUT_PREFIX}/${target}"
 663                 mkdir -p "${output_dir}"
 664                 trap build_target_killed TERM
 665         else
 666                 output_dir="${OUTPUT_PREFIX}"
 667         fi
 668
 669         export BUILD_DIR="${output_dir}"
 670
 671         target_arch=$(get_target_arch ${target})
 672         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 673         if [ "${cross_toolchain}" ] ; then
 674             MAKE="make CROSS_COMPILE=${cross_toolchain}"
 675         elif [ "${CROSS_COMPILE}" ] ; then
 676             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
 677         else
 678             MAKE=make
 679         fi
 680
 681         ${MAKE} distclean >/dev/null
 682         ${MAKE} -s ${target}_config
 683
 684         ${MAKE} ${JOBS} ${CHECK} all \
 685                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 686
 687         # Check for 'make' errors
 688         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 689                 RC=1
 690         fi
 691
 692         if [ $BUILD_MANY == 1 ] ; then
 693                 trap - TERM
 694
 695                 ${MAKE} -s tidy
 696
 697                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 698                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 699                 else
 700                         rm ${LOG_DIR}/${target}.ERR
 701                 fi
 702         else
 703                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 704                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 705                                 : $(( ERR_CNT += 1 ))
 706                                 ERR_LIST="${ERR_LIST} $target"
 707                         else
 708                                 : $(( WRN_CNT += 1 ))
 709                                 WRN_LIST="${WRN_LIST} $target"
 710                         fi
 711                 else
 712                         rm ${LOG_DIR}/${target}.ERR
 713                 fi
 714         fi
 715
 716         OBJS=${output_dir}/u-boot
 717         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 718                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 719         fi
 720
 721         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 722
 723         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 724
 725         touch "${donep}${build_idx}"
 726 }
 727
 728 manage_builds() {
 729         search_idx=${OLDEST_IDX}
 730         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 731
 732         while true; do
 733                 if [ -e "${donep}${search_idx}" ] ; then
 734                         : $(( CURRENT_CNT-- ))
 735                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 736                                 : $(( OLDEST_IDX++ ))
 737
 738                         # Only want to count it once
 739                         rm -f "${donep}${search_idx}"
 740                         touch "${skipp}${search_idx}"
 741                 elif [ -e "${skipp}${search_idx}" ] ; then
 742                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 743                                 : $(( OLDEST_IDX++ ))
 744                 fi
 745                 : $(( search_idx++ ))
 746                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 747                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 748                                 search_idx=${OLDEST_IDX}
 749                                 sleep 1
 750                         else
 751                                 break
 752                         fi
 753                 fi
 754         done
 755 }
 756
 757 build_targets() {
 758         for t in "$@" ; do
 759                 # If a LIST_xxx var exists, use it.  But avoid variable
 760                 # expansion in the eval when a board name contains certain
 761                 # characters that the shell interprets.
 762                 case ${t} in
 763                         *[-+=]*) list= ;;
 764                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 765                 esac
 766                 if [ -n "${list}" ] ; then
 767                         build_targets ${list}
 768                 else
 769                         : $((TOTAL_CNT += 1))
 770                         : $((CURRENT_CNT += 1))
 771                         rm -f "${donep}${TOTAL_CNT}"
 772                         rm -f "${skipp}${TOTAL_CNT}"
 773                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 774                                 : $((SKIP_CNT += 1))
 775                                 touch "${donep}${TOTAL_CNT}"
 776                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 777                                 : $((SKIP_CNT += 1))
 778                                 touch "${donep}${TOTAL_CNT}"
 779                         else
 780                                 if [ $BUILD_MANY == 1 ] ; then
 781                                         build_target ${t} ${TOTAL_CNT} &
 782                                 else
 783                                         CUR_TGT="${t}"
 784                                         build_target ${t} ${TOTAL_CNT}
 785                                         CUR_TGT=''
 786                                 fi
 787                         fi
 788                 fi
 789
 790                 # We maintain a running count of all the builds we have done.
 791                 # Each finished build will have a file called ${donep}${n},
 792                 # where n is the index of the build. Each build
 793                 # we've already noted as finished will have ${skipp}${n}.
 794                 # We track the current index via TOTAL_CNT, and the oldest
 795                 # index. When we exceed the maximum number of parallel builds,
 796                 # We look from oldest to current for builds that have completed,
 797                 # and update the current count and oldest index as appropriate.
 798                 # If we've gone through the entire list, wait a second, and
 799                 # reprocess the entire list until we find a build that has
 800                 # completed
 801                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 802                         manage_builds
 803                 fi
 804         done
 805 }
 806
 807 #-----------------------------------------------------------------------
 808
 809 kill_children() {
 810         local OS=$(uname -s)
 811         local children=""
 812         case "${OS}" in
 813                 "Darwin")
 814                         # Mac OS X is known to have BSD style ps
 815                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 816                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 817                         ;;
 818                 *)
 819                         # everything else tries the GNU style
 820                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 821                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 822                         ;;
 823         esac
 824
 825         kill $children 2> /dev/null
 826         wait $children 2> /dev/null
 827
 828         exit
 829 }
 830
 831 print_stats() {
 832         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 833
 834         # Only count boards that completed
 835         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 836
 837         rm -f ${donep}* ${skipp}*
 838
 839         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 840                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 841                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 842                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 843                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 844                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 845                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 846         else
 847                 # Remove the logs for any board that was interrupted
 848                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 849         fi
 850
 851         : $((TOTAL_CNT -= ${SKIP_CNT}))
 852         echo ""
 853         echo "--------------------- SUMMARY ----------------------------"
 854         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 855                 echo "Boards skipped: ${SKIP_CNT}"
 856         fi
 857         echo "Boards compiled: ${TOTAL_CNT}"
 858         if [ ${ERR_CNT} -gt 0 ] ; then
 859                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 860         fi
 861         if [ ${WRN_CNT} -gt 0 ] ; then
 862                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 863         fi
 864         echo "----------------------------------------------------------"
 865
 866         if [ $BUILD_MANY == 1 ] ; then
 867                 kill_children
 868         fi
 869
 870         exit $RC
 871 }
 872
 873 #-----------------------------------------------------------------------
 874
 875 # Build target groups selected by options, plus any command line args
 876 set -- ${SELECTED} "$@"
 877 # run PowerPC by default
 878 [ $# = 0 ] && set -- powerpc
 879 build_targets "$@"
 880 wait