arch/arm/cpu/arm926ejs/mxs/spl_power_init.c

   1 /*
   2  * Freescale i.MX28 Boot PMIC init
   3  *
   4  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
   5  * on behalf of DENX Software Engineering GmbH
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <config.h>
  12 #include <asm/io.h>
  13 #include <asm/arch/imx-regs.h>
  14
  15 #include "mxs_init.h"
  16
  17 /**
  18  * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL
  19  *
  20  * This function switches the CPU core clock from PLL to 24MHz XTAL
  21  * oscilator. This is necessary if the PLL is being reconfigured to
  22  * prevent crash of the CPU core.
  23  */
  24 static void mxs_power_clock2xtal(void)
  25 {
  26         struct mxs_clkctrl_regs *clkctrl_regs =
  27                 (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
  28
  29         /* Set XTAL as CPU reference clock */
  30         writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
  31                 &clkctrl_regs->hw_clkctrl_clkseq_set);
  32 }
  33
  34 /**
  35  * mxs_power_clock2pll() - Switch CPU core clock source to PLL
  36  *
  37  * This function switches the CPU core clock from 24MHz XTAL oscilator
  38  * to PLL. This can only be called once the PLL has re-locked and once
  39  * the PLL is stable after reconfiguration.
  40  */
  41 static void mxs_power_clock2pll(void)
  42 {
  43         struct mxs_clkctrl_regs *clkctrl_regs =
  44                 (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
  45
  46         setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0,
  47                         CLKCTRL_PLL0CTRL0_POWER);
  48         early_delay(100);
  49         setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq,
  50                         CLKCTRL_CLKSEQ_BYPASS_CPU);
  51 }
  52
  53 /**
  54  * mxs_power_set_auto_restart() - Set the auto-restart bit
  55  *
  56  * This function ungates the RTC block and sets the AUTO_RESTART
  57  * bit to work around a design bug on MX28EVK Rev. A .
  58  */
  59
  60 static void mxs_power_set_auto_restart(void)
  61 {
  62         struct mxs_rtc_regs *rtc_regs =
  63                 (struct mxs_rtc_regs *)MXS_RTC_BASE;
  64
  65         writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
  66         while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
  67                 ;
  68
  69         writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
  70         while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
  71                 ;
  72
  73         /* Do nothing if flag already set */
  74         if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
  75                 return;
  76
  77         while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
  78                 ;
  79
  80         setbits_le32(&rtc_regs->hw_rtc_persistent0,
  81                         RTC_PERSISTENT0_AUTO_RESTART);
  82         writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
  83         writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
  84         while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
  85                 ;
  86         while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
  87                 ;
  88 }
  89
  90 /**
  91  * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter
  92  *
  93  * This function configures the VDDIO, VDDA and VDDD linear regulators output
  94  * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching
  95  * converter. This is the recommended setting for the case where we use both
  96  * linear regulators and DC-DC converter to power the VDDIO rail.
  97  */
  98 static void mxs_power_set_linreg(void)
  99 {
 100         struct mxs_power_regs *power_regs =
 101                 (struct mxs_power_regs *)MXS_POWER_BASE;
 102
 103         /* Set linear regulator 25mV below switching converter */
 104         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
 105                         POWER_VDDDCTRL_LINREG_OFFSET_MASK,
 106                         POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
 107
 108         clrsetbits_le32(&power_regs->hw_power_vddactrl,
 109                         POWER_VDDACTRL_LINREG_OFFSET_MASK,
 110                         POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
 111
 112         clrsetbits_le32(&power_regs->hw_power_vddioctrl,
 113                         POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
 114                         POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
 115 }
 116
 117 /**
 118  * mxs_get_batt_volt() - Measure battery input voltage
 119  *
 120  * This function retrieves the battery input voltage and returns it.
 121  */
 122 static int mxs_get_batt_volt(void)
 123 {
 124         struct mxs_power_regs *power_regs =
 125                 (struct mxs_power_regs *)MXS_POWER_BASE;
 126         uint32_t volt = readl(&power_regs->hw_power_battmonitor);
 127         volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
 128         volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
 129         volt *= 8;
 130         return volt;
 131 }
 132
 133 /**
 134  * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot
 135  *
 136  * This function checks if the battery input voltage is higher than 3.6V and
 137  * therefore allows the system to successfully boot using this power source.
 138  */
 139 static int mxs_is_batt_ready(void)
 140 {
 141         return (mxs_get_batt_volt() >= 3600);
 142 }
 143
 144 /**
 145  * mxs_is_batt_good() - Test if battery is operational at all
 146  *
 147  * This function starts recharging the battery and tests if the input current
 148  * provided by the 5V input recharging the battery is also sufficient to power
 149  * the DC-DC converter.
 150  */
 151 static int mxs_is_batt_good(void)
 152 {
 153         struct mxs_power_regs *power_regs =
 154                 (struct mxs_power_regs *)MXS_POWER_BASE;
 155         uint32_t volt = mxs_get_batt_volt();
 156
 157         if ((volt >= 2400) && (volt <= 4300))
 158                 return 1;
 159
 160         clrsetbits_le32(&power_regs->hw_power_5vctrl,
 161                 POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 162                 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
 163         writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
 164                 &power_regs->hw_power_5vctrl_clr);
 165
 166         clrsetbits_le32(&power_regs->hw_power_charge,
 167                 POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
 168                 POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
 169
 170         writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
 171         writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
 172                 &power_regs->hw_power_5vctrl_clr);
 173
 174         early_delay(500000);
 175
 176         volt = mxs_get_batt_volt();
 177
 178         if (volt >= 3500)
 179                 return 0;
 180
 181         if (volt >= 2400)
 182                 return 1;
 183
 184         writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
 185                 &power_regs->hw_power_charge_clr);
 186         writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
 187
 188         return 0;
 189 }
 190
 191 /**
 192  * mxs_power_setup_5v_detect() - Start the 5V input detection comparator
 193  *
 194  * This function enables the 5V detection comparator and sets the 5V valid
 195  * threshold to 4.4V . We use 4.4V threshold here to make sure that even
 196  * under high load, the voltage drop on the 5V input won't be so critical
 197  * to cause undervolt on the 4P2 linear regulator supplying the DC-DC
 198  * converter and thus making the system crash.
 199  */
 200 static void mxs_power_setup_5v_detect(void)
 201 {
 202         struct mxs_power_regs *power_regs =
 203                 (struct mxs_power_regs *)MXS_POWER_BASE;
 204
 205         /* Start 5V detection */
 206         clrsetbits_le32(&power_regs->hw_power_5vctrl,
 207                         POWER_5VCTRL_VBUSVALID_TRSH_MASK,
 208                         POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
 209                         POWER_5VCTRL_PWRUP_VBUS_CMPS);
 210 }
 211
 212 /**
 213  * mxs_src_power_init() - Preconfigure the power block
 214  *
 215  * This function configures reasonable values for the DC-DC control loop
 216  * and battery monitor.
 217  */
 218 static void mxs_src_power_init(void)
 219 {
 220         struct mxs_power_regs *power_regs =
 221                 (struct mxs_power_regs *)MXS_POWER_BASE;
 222
 223         /* Improve efficieny and reduce transient ripple */
 224         writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
 225                 POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
 226
 227         clrsetbits_le32(&power_regs->hw_power_dclimits,
 228                         POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
 229                         0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
 230
 231         setbits_le32(&power_regs->hw_power_battmonitor,
 232                         POWER_BATTMONITOR_EN_BATADJ);
 233
 234         /* Increase the RCSCALE level for quick DCDC response to dynamic load */
 235         clrsetbits_le32(&power_regs->hw_power_loopctrl,
 236                         POWER_LOOPCTRL_EN_RCSCALE_MASK,
 237                         POWER_LOOPCTRL_RCSCALE_THRESH |
 238                         POWER_LOOPCTRL_EN_RCSCALE_8X);
 239
 240         clrsetbits_le32(&power_regs->hw_power_minpwr,
 241                         POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
 242
 243         /* 5V to battery handoff ... FIXME */
 244         setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
 245         early_delay(30);
 246         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
 247 }
 248
 249 /**
 250  * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator
 251  *
 252  * This function configures the necessary parameters for the 4P2 linear
 253  * regulator to supply the DC-DC converter from 5V input.
 254  */
 255 static void mxs_power_init_4p2_params(void)
 256 {
 257         struct mxs_power_regs *power_regs =
 258                 (struct mxs_power_regs *)MXS_POWER_BASE;
 259
 260         /* Setup 4P2 parameters */
 261         clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
 262                 POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
 263                 POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
 264
 265         clrsetbits_le32(&power_regs->hw_power_5vctrl,
 266                 POWER_5VCTRL_HEADROOM_ADJ_MASK,
 267                 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
 268
 269         clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
 270                 POWER_DCDC4P2_DROPOUT_CTRL_MASK,
 271                 POWER_DCDC4P2_DROPOUT_CTRL_100MV |
 272                 POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
 273
 274         clrsetbits_le32(&power_regs->hw_power_5vctrl,
 275                 POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 276                 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
 277 }
 278
 279 /**
 280  * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2
 281  * @xfer:       Select if the input shall be enabled or disabled
 282  *
 283  * This function enables or disables the 4P2 input into the DC-DC converter.
 284  */
 285 static void mxs_enable_4p2_dcdc_input(int xfer)
 286 {
 287         struct mxs_power_regs *power_regs =
 288                 (struct mxs_power_regs *)MXS_POWER_BASE;
 289         uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
 290         uint32_t prev_5v_brnout, prev_5v_droop;
 291
 292         prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
 293                                 POWER_5VCTRL_PWDN_5VBRNOUT;
 294         prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
 295                                 POWER_CTRL_ENIRQ_VDD5V_DROOP;
 296
 297         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
 298         writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
 299                 &power_regs->hw_power_reset);
 300
 301         clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
 302
 303         if (xfer && (readl(&power_regs->hw_power_5vctrl) &
 304                         POWER_5VCTRL_ENABLE_DCDC)) {
 305                 return;
 306         }
 307
 308         /*
 309          * Recording orignal values that will be modified temporarlily
 310          * to handle a chip bug. See chip errata for CQ ENGR00115837
 311          */
 312         tmp = readl(&power_regs->hw_power_5vctrl);
 313         vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
 314         vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
 315
 316         pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
 317
 318         /*
 319          * Disable mechanisms that get erroneously tripped by when setting
 320          * the DCDC4P2 EN_DCDC
 321          */
 322         clrbits_le32(&power_regs->hw_power_5vctrl,
 323                 POWER_5VCTRL_VBUSVALID_5VDETECT |
 324                 POWER_5VCTRL_VBUSVALID_TRSH_MASK);
 325
 326         writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
 327
 328         if (xfer) {
 329                 setbits_le32(&power_regs->hw_power_5vctrl,
 330                                 POWER_5VCTRL_DCDC_XFER);
 331                 early_delay(20);
 332                 clrbits_le32(&power_regs->hw_power_5vctrl,
 333                                 POWER_5VCTRL_DCDC_XFER);
 334
 335                 setbits_le32(&power_regs->hw_power_5vctrl,
 336                                 POWER_5VCTRL_ENABLE_DCDC);
 337         } else {
 338                 setbits_le32(&power_regs->hw_power_dcdc4p2,
 339                                 POWER_DCDC4P2_ENABLE_DCDC);
 340         }
 341
 342         early_delay(25);
 343
 344         clrsetbits_le32(&power_regs->hw_power_5vctrl,
 345                         POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
 346
 347         if (vbus_5vdetect)
 348                 writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
 349
 350         if (!pwd_bo)
 351                 clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
 352
 353         while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
 354                 writel(POWER_CTRL_VBUS_VALID_IRQ,
 355                         &power_regs->hw_power_ctrl_clr);
 356
 357         if (prev_5v_brnout) {
 358                 writel(POWER_5VCTRL_PWDN_5VBRNOUT,
 359                         &power_regs->hw_power_5vctrl_set);
 360                 writel(POWER_RESET_UNLOCK_KEY,
 361                         &power_regs->hw_power_reset);
 362         } else {
 363                 writel(POWER_5VCTRL_PWDN_5VBRNOUT,
 364                         &power_regs->hw_power_5vctrl_clr);
 365                 writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
 366                         &power_regs->hw_power_reset);
 367         }
 368
 369         while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
 370                 writel(POWER_CTRL_VDD5V_DROOP_IRQ,
 371                         &power_regs->hw_power_ctrl_clr);
 372
 373         if (prev_5v_droop)
 374                 clrbits_le32(&power_regs->hw_power_ctrl,
 375                                 POWER_CTRL_ENIRQ_VDD5V_DROOP);
 376         else
 377                 setbits_le32(&power_regs->hw_power_ctrl,
 378                                 POWER_CTRL_ENIRQ_VDD5V_DROOP);
 379 }
 380
 381 /**
 382  * mxs_power_init_4p2_regulator() - Start the 4P2 regulator
 383  *
 384  * This function enables the 4P2 regulator and switches the DC-DC converter
 385  * to use the 4P2 input.
 386  */
 387 static void mxs_power_init_4p2_regulator(void)
 388 {
 389         struct mxs_power_regs *power_regs =
 390                 (struct mxs_power_regs *)MXS_POWER_BASE;
 391         uint32_t tmp, tmp2;
 392
 393         setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
 394
 395         writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
 396
 397         writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 398                 &power_regs->hw_power_5vctrl_clr);
 399         clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
 400
 401         /* Power up the 4p2 rail and logic/control */
 402         writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
 403                 &power_regs->hw_power_5vctrl_clr);
 404
 405         /*
 406          * Start charging up the 4p2 capacitor. We ramp of this charge
 407          * gradually to avoid large inrush current from the 5V cable which can
 408          * cause transients/problems
 409          */
 410         mxs_enable_4p2_dcdc_input(0);
 411
 412         if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
 413                 /*
 414                  * If we arrived here, we were unable to recover from mx23 chip
 415                  * errata 5837. 4P2 is disabled and sufficient battery power is
 416                  * not present. Exiting to not enable DCDC power during 5V
 417                  * connected state.
 418                  */
 419                 clrbits_le32(&power_regs->hw_power_dcdc4p2,
 420                         POWER_DCDC4P2_ENABLE_DCDC);
 421                 writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
 422                         &power_regs->hw_power_5vctrl_set);
 423                 hang();
 424         }
 425
 426         /*
 427          * Here we set the 4p2 brownout level to something very close to 4.2V.
 428          * We then check the brownout status. If the brownout status is false,
 429          * the voltage is already close to the target voltage of 4.2V so we
 430          * can go ahead and set the 4P2 current limit to our max target limit.
 431          * If the brownout status is true, we need to ramp us the current limit
 432          * so that we don't cause large inrush current issues. We step up the
 433          * current limit until the brownout status is false or until we've
 434          * reached our maximum defined 4p2 current limit.
 435          */
 436         clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
 437                         POWER_DCDC4P2_BO_MASK,
 438                         22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */
 439
 440         if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
 441                 setbits_le32(&power_regs->hw_power_5vctrl,
 442                         0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
 443         } else {
 444                 tmp = (readl(&power_regs->hw_power_5vctrl) &
 445                         POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
 446                         POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
 447                 while (tmp < 0x3f) {
 448                         if (!(readl(&power_regs->hw_power_sts) &
 449                                         POWER_STS_DCDC_4P2_BO)) {
 450                                 tmp = readl(&power_regs->hw_power_5vctrl);
 451                                 tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
 452                                 early_delay(100);
 453                                 writel(tmp, &power_regs->hw_power_5vctrl);
 454                                 break;
 455                         } else {
 456                                 tmp++;
 457                                 tmp2 = readl(&power_regs->hw_power_5vctrl);
 458                                 tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
 459                                 tmp2 |= tmp <<
 460                                         POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
 461                                 writel(tmp2, &power_regs->hw_power_5vctrl);
 462                                 early_delay(100);
 463                         }
 464                 }
 465         }
 466
 467         clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
 468         writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
 469 }
 470
 471 /**
 472  * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source
 473  *
 474  * This function configures the DC-DC converter to be supplied from the 4P2
 475  * linear regulator.
 476  */
 477 static void mxs_power_init_dcdc_4p2_source(void)
 478 {
 479         struct mxs_power_regs *power_regs =
 480                 (struct mxs_power_regs *)MXS_POWER_BASE;
 481
 482         if (!(readl(&power_regs->hw_power_dcdc4p2) &
 483                 POWER_DCDC4P2_ENABLE_DCDC)) {
 484                 hang();
 485         }
 486
 487         mxs_enable_4p2_dcdc_input(1);
 488
 489         if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
 490                 clrbits_le32(&power_regs->hw_power_dcdc4p2,
 491                         POWER_DCDC4P2_ENABLE_DCDC);
 492                 writel(POWER_5VCTRL_ENABLE_DCDC,
 493                         &power_regs->hw_power_5vctrl_clr);
 494                 writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
 495                         &power_regs->hw_power_5vctrl_set);
 496         }
 497 }
 498
 499 /**
 500  * mxs_power_enable_4p2() - Power up the 4P2 regulator
 501  *
 502  * This function drives the process of powering up the 4P2 linear regulator
 503  * and switching the DC-DC converter input over to the 4P2 linear regulator.
 504  */
 505 static void mxs_power_enable_4p2(void)
 506 {
 507         struct mxs_power_regs *power_regs =
 508                 (struct mxs_power_regs *)MXS_POWER_BASE;
 509         uint32_t vdddctrl, vddactrl, vddioctrl;
 510         uint32_t tmp;
 511
 512         vdddctrl = readl(&power_regs->hw_power_vdddctrl);
 513         vddactrl = readl(&power_regs->hw_power_vddactrl);
 514         vddioctrl = readl(&power_regs->hw_power_vddioctrl);
 515
 516         setbits_le32(&power_regs->hw_power_vdddctrl,
 517                 POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
 518                 POWER_VDDDCTRL_PWDN_BRNOUT);
 519
 520         setbits_le32(&power_regs->hw_power_vddactrl,
 521                 POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
 522                 POWER_VDDACTRL_PWDN_BRNOUT);
 523
 524         setbits_le32(&power_regs->hw_power_vddioctrl,
 525                 POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
 526
 527         mxs_power_init_4p2_params();
 528         mxs_power_init_4p2_regulator();
 529
 530         /* Shutdown battery (none present) */
 531         if (!mxs_is_batt_ready()) {
 532                 clrbits_le32(&power_regs->hw_power_dcdc4p2,
 533                                 POWER_DCDC4P2_BO_MASK);
 534                 writel(POWER_CTRL_DCDC4P2_BO_IRQ,
 535                                 &power_regs->hw_power_ctrl_clr);
 536                 writel(POWER_CTRL_ENIRQ_DCDC4P2_BO,
 537                                 &power_regs->hw_power_ctrl_clr);
 538         }
 539
 540         mxs_power_init_dcdc_4p2_source();
 541
 542         writel(vdddctrl, &power_regs->hw_power_vdddctrl);
 543         early_delay(20);
 544         writel(vddactrl, &power_regs->hw_power_vddactrl);
 545         early_delay(20);
 546         writel(vddioctrl, &power_regs->hw_power_vddioctrl);
 547
 548         /*
 549          * Check if FET is enabled on either powerout and if so,
 550          * disable load.
 551          */
 552         tmp = 0;
 553         tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
 554                         POWER_VDDDCTRL_DISABLE_FET);
 555         tmp |= !(readl(&power_regs->hw_power_vddactrl) &
 556                         POWER_VDDACTRL_DISABLE_FET);
 557         tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
 558                         POWER_VDDIOCTRL_DISABLE_FET);
 559         if (tmp)
 560                 writel(POWER_CHARGE_ENABLE_LOAD,
 561                         &power_regs->hw_power_charge_clr);
 562 }
 563
 564 /**
 565  * mxs_boot_valid_5v() - Boot from 5V supply
 566  *
 567  * This function configures the power block to boot from valid 5V input.
 568  * This is called only if the 5V is reliable and can properly supply the
 569  * CPU. This function proceeds to configure the 4P2 converter to be supplied
 570  * from the 5V input.
 571  */
 572 static void mxs_boot_valid_5v(void)
 573 {
 574         struct mxs_power_regs *power_regs =
 575                 (struct mxs_power_regs *)MXS_POWER_BASE;
 576
 577         /*
 578          * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
 579          * disconnect event. FIXME
 580          */
 581         writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
 582                 &power_regs->hw_power_5vctrl_set);
 583
 584         /* Configure polarity to check for 5V disconnection. */
 585         writel(POWER_CTRL_POLARITY_VBUSVALID |
 586                 POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
 587                 &power_regs->hw_power_ctrl_clr);
 588
 589         writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
 590                 &power_regs->hw_power_ctrl_clr);
 591
 592         mxs_power_enable_4p2();
 593 }
 594
 595 /**
 596  * mxs_powerdown() - Shut down the system
 597  *
 598  * This function powers down the CPU completely.
 599  */
 600 static void mxs_powerdown(void)
 601 {
 602         struct mxs_power_regs *power_regs =
 603                 (struct mxs_power_regs *)MXS_POWER_BASE;
 604         writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
 605         writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
 606                 &power_regs->hw_power_reset);
 607 }
 608
 609 /**
 610  * mxs_batt_boot() - Configure the power block to boot from battery input
 611  *
 612  * This function configures the power block to boot from the battery voltage
 613  * supply.
 614  */
 615 static void mxs_batt_boot(void)
 616 {
 617         struct mxs_power_regs *power_regs =
 618                 (struct mxs_power_regs *)MXS_POWER_BASE;
 619
 620         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
 621         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC);
 622
 623         clrbits_le32(&power_regs->hw_power_dcdc4p2,
 624                         POWER_DCDC4P2_ENABLE_DCDC | POWER_DCDC4P2_ENABLE_4P2);
 625         writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr);
 626
 627         /* 5V to battery handoff. */
 628         setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
 629         early_delay(30);
 630         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
 631
 632         writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
 633
 634         clrsetbits_le32(&power_regs->hw_power_minpwr,
 635                         POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
 636
 637         mxs_power_set_linreg();
 638
 639         clrbits_le32(&power_regs->hw_power_vdddctrl,
 640                 POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG);
 641
 642         clrbits_le32(&power_regs->hw_power_vddactrl,
 643                 POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG);
 644
 645         clrbits_le32(&power_regs->hw_power_vddioctrl,
 646                 POWER_VDDIOCTRL_DISABLE_FET);
 647
 648         setbits_le32(&power_regs->hw_power_5vctrl,
 649                 POWER_5VCTRL_PWD_CHARGE_4P2_MASK);
 650
 651         setbits_le32(&power_regs->hw_power_5vctrl,
 652                 POWER_5VCTRL_ENABLE_DCDC);
 653
 654         clrsetbits_le32(&power_regs->hw_power_5vctrl,
 655                 POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 656                 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
 657
 658         mxs_power_enable_4p2();
 659 }
 660
 661 /**
 662  * mxs_handle_5v_conflict() - Test if the 5V input is reliable
 663  *
 664  * This function tests if the 5V input can reliably supply the system. If it
 665  * can, then proceed to configuring the system to boot from 5V source, otherwise
 666  * try booting from battery supply. If we can not boot from battery supply
 667  * either, shut down the system.
 668  */
 669 static void mxs_handle_5v_conflict(void)
 670 {
 671         struct mxs_power_regs *power_regs =
 672                 (struct mxs_power_regs *)MXS_POWER_BASE;
 673         uint32_t tmp;
 674
 675         setbits_le32(&power_regs->hw_power_vddioctrl,
 676                         POWER_VDDIOCTRL_BO_OFFSET_MASK);
 677
 678         for (;;) {
 679                 tmp = readl(&power_regs->hw_power_sts);
 680
 681                 if (tmp & POWER_STS_VDDIO_BO) {
 682                         /*
 683                          * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes
 684                          * unreliable
 685                          */
 686                         mxs_powerdown();
 687                         break;
 688                 }
 689
 690                 if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
 691                         mxs_boot_valid_5v();
 692                         break;
 693                 } else {
 694                         mxs_powerdown();
 695                         break;
 696                 }
 697
 698                 if (tmp & POWER_STS_PSWITCH_MASK) {
 699                         mxs_batt_boot();
 700                         break;
 701                 }
 702         }
 703 }
 704
 705 /**
 706  * mxs_5v_boot() - Configure the power block to boot from 5V input
 707  *
 708  * This function handles configuration of the power block when supplied by
 709  * a 5V input.
 710  */
 711 static void mxs_5v_boot(void)
 712 {
 713         struct mxs_power_regs *power_regs =
 714                 (struct mxs_power_regs *)MXS_POWER_BASE;
 715
 716         /*
 717          * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
 718          * but their implementation always returns 1 so we omit it here.
 719          */
 720         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
 721                 mxs_boot_valid_5v();
 722                 return;
 723         }
 724
 725         early_delay(1000);
 726         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
 727                 mxs_boot_valid_5v();
 728                 return;
 729         }
 730
 731         mxs_handle_5v_conflict();
 732 }
 733
 734 /**
 735  * mxs_init_batt_bo() - Configure battery brownout threshold
 736  *
 737  * This function configures the battery input brownout threshold. The value
 738  * at which the battery brownout happens is configured to 3.0V in the code.
 739  */
 740 static void mxs_init_batt_bo(void)
 741 {
 742         struct mxs_power_regs *power_regs =
 743                 (struct mxs_power_regs *)MXS_POWER_BASE;
 744
 745         /* Brownout at 3V */
 746         clrsetbits_le32(&power_regs->hw_power_battmonitor,
 747                 POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
 748                 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
 749
 750         writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
 751         writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
 752 }
 753
 754 /**
 755  * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter
 756  *
 757  * This function turns off the VDDD linear regulator and therefore makes
 758  * the VDDD rail be supplied only by the DC-DC converter.
 759  */
 760 static void mxs_switch_vddd_to_dcdc_source(void)
 761 {
 762         struct mxs_power_regs *power_regs =
 763                 (struct mxs_power_regs *)MXS_POWER_BASE;
 764
 765         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
 766                 POWER_VDDDCTRL_LINREG_OFFSET_MASK,
 767                 POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
 768
 769         clrbits_le32(&power_regs->hw_power_vdddctrl,
 770                 POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
 771                 POWER_VDDDCTRL_DISABLE_STEPPING);
 772 }
 773
 774 /**
 775  * mxs_power_configure_power_source() - Configure power block source
 776  *
 777  * This function is the core of the power configuration logic. The function
 778  * selects the power block input source and configures the whole power block
 779  * accordingly. After the configuration is complete and the system is stable
 780  * again, the function switches the CPU clock source back to PLL. Finally,
 781  * the function switches the voltage rails to DC-DC converter.
 782  */
 783 static void mxs_power_configure_power_source(void)
 784 {
 785         int batt_ready, batt_good;
 786         struct mxs_power_regs *power_regs =
 787                 (struct mxs_power_regs *)MXS_POWER_BASE;
 788         struct mxs_lradc_regs *lradc_regs =
 789                 (struct mxs_lradc_regs *)MXS_LRADC_BASE;
 790
 791         mxs_src_power_init();
 792
 793         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
 794                 batt_ready = mxs_is_batt_ready();
 795                 if (batt_ready) {
 796                         /* 5V source detected, good battery detected. */
 797                         mxs_batt_boot();
 798                 } else {
 799                         batt_good = mxs_is_batt_good();
 800                         if (!batt_good) {
 801                                 /* 5V source detected, bad battery detected. */
 802                                 writel(LRADC_CONVERSION_AUTOMATIC,
 803                                         &lradc_regs->hw_lradc_conversion_clr);
 804                                 clrbits_le32(&power_regs->hw_power_battmonitor,
 805                                         POWER_BATTMONITOR_BATT_VAL_MASK);
 806                         }
 807                         mxs_5v_boot();
 808                 }
 809         } else {
 810                 /* 5V not detected, booting from battery. */
 811                 mxs_batt_boot();
 812         }
 813
 814         mxs_power_clock2pll();
 815
 816         mxs_init_batt_bo();
 817
 818         mxs_switch_vddd_to_dcdc_source();
 819
 820 #ifdef CONFIG_MX23
 821         /* Fire up the VDDMEM LinReg now that we're all set. */
 822         writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
 823                 &power_regs->hw_power_vddmemctrl);
 824 #endif
 825 }
 826
 827 /**
 828  * mxs_enable_output_rail_protection() - Enable power rail protection
 829  *
 830  * This function enables overload protection on the power rails. This is
 831  * triggered if the power rails' voltage drops rapidly due to overload and
 832  * in such case, the supply to the powerrail is cut-off, protecting the
 833  * CPU from damage. Note that under such condition, the system will likely
 834  * crash or misbehave.
 835  */
 836 static void mxs_enable_output_rail_protection(void)
 837 {
 838         struct mxs_power_regs *power_regs =
 839                 (struct mxs_power_regs *)MXS_POWER_BASE;
 840
 841         writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
 842                 POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
 843
 844         setbits_le32(&power_regs->hw_power_vdddctrl,
 845                         POWER_VDDDCTRL_PWDN_BRNOUT);
 846
 847         setbits_le32(&power_regs->hw_power_vddactrl,
 848                         POWER_VDDACTRL_PWDN_BRNOUT);
 849
 850         setbits_le32(&power_regs->hw_power_vddioctrl,
 851                         POWER_VDDIOCTRL_PWDN_BRNOUT);
 852 }
 853
 854 /**
 855  * mxs_get_vddio_power_source_off() - Get VDDIO rail power source
 856  *
 857  * This function tests if the VDDIO rail is supplied by linear regulator
 858  * or by the DC-DC converter. Returns 1 if powered by linear regulator,
 859  * returns 0 if powered by the DC-DC converter.
 860  */
 861 static int mxs_get_vddio_power_source_off(void)
 862 {
 863         struct mxs_power_regs *power_regs =
 864                 (struct mxs_power_regs *)MXS_POWER_BASE;
 865         uint32_t tmp;
 866
 867         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
 868                 tmp = readl(&power_regs->hw_power_vddioctrl);
 869                 if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
 870                         if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
 871                                 POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
 872                                 return 1;
 873                         }
 874                 }
 875
 876                 if (!(readl(&power_regs->hw_power_5vctrl) &
 877                         POWER_5VCTRL_ENABLE_DCDC)) {
 878                         if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
 879                                 POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
 880                                 return 1;
 881                         }
 882                 }
 883         }
 884
 885         return 0;
 886
 887 }
 888
 889 /**
 890  * mxs_get_vddd_power_source_off() - Get VDDD rail power source
 891  *
 892  * This function tests if the VDDD rail is supplied by linear regulator
 893  * or by the DC-DC converter. Returns 1 if powered by linear regulator,
 894  * returns 0 if powered by the DC-DC converter.
 895  */
 896 static int mxs_get_vddd_power_source_off(void)
 897 {
 898         struct mxs_power_regs *power_regs =
 899                 (struct mxs_power_regs *)MXS_POWER_BASE;
 900         uint32_t tmp;
 901
 902         tmp = readl(&power_regs->hw_power_vdddctrl);
 903         if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
 904                 if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
 905                         POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
 906                         return 1;
 907                 }
 908         }
 909
 910         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
 911                 if (!(readl(&power_regs->hw_power_5vctrl) &
 912                         POWER_5VCTRL_ENABLE_DCDC)) {
 913                         return 1;
 914                 }
 915         }
 916
 917         if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
 918                 if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
 919                         POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
 920                         return 1;
 921                 }
 922         }
 923
 924         return 0;
 925 }
 926
 927 struct mxs_vddx_cfg {
 928         uint32_t                *reg;
 929         uint8_t                 step_mV;
 930         uint16_t                lowest_mV;
 931         int                     (*powered_by_linreg)(void);
 932         uint32_t                trg_mask;
 933         uint32_t                bo_irq;
 934         uint32_t                bo_enirq;
 935         uint32_t                bo_offset_mask;
 936         uint32_t                bo_offset_offset;
 937 };
 938
 939 static const struct mxs_vddx_cfg mxs_vddio_cfg = {
 940         .reg                    = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
 941                                         hw_power_vddioctrl),
 942 #if defined(CONFIG_MX23)
 943         .step_mV                = 25,
 944 #else
 945         .step_mV                = 50,
 946 #endif
 947         .lowest_mV              = 2800,
 948         .powered_by_linreg      = mxs_get_vddio_power_source_off,
 949         .trg_mask               = POWER_VDDIOCTRL_TRG_MASK,
 950         .bo_irq                 = POWER_CTRL_VDDIO_BO_IRQ,
 951         .bo_enirq               = POWER_CTRL_ENIRQ_VDDIO_BO,
 952         .bo_offset_mask         = POWER_VDDIOCTRL_BO_OFFSET_MASK,
 953         .bo_offset_offset       = POWER_VDDIOCTRL_BO_OFFSET_OFFSET,
 954 };
 955
 956 static const struct mxs_vddx_cfg mxs_vddd_cfg = {
 957         .reg                    = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
 958                                         hw_power_vdddctrl),
 959         .step_mV                = 25,
 960         .lowest_mV              = 800,
 961         .powered_by_linreg      = mxs_get_vddd_power_source_off,
 962         .trg_mask               = POWER_VDDDCTRL_TRG_MASK,
 963         .bo_irq                 = POWER_CTRL_VDDD_BO_IRQ,
 964         .bo_enirq               = POWER_CTRL_ENIRQ_VDDD_BO,
 965         .bo_offset_mask         = POWER_VDDDCTRL_BO_OFFSET_MASK,
 966         .bo_offset_offset       = POWER_VDDDCTRL_BO_OFFSET_OFFSET,
 967 };
 968
 969 #ifdef CONFIG_MX23
 970 static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
 971         .reg                    = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
 972                                         hw_power_vddmemctrl),
 973         .step_mV                = 50,
 974         .lowest_mV              = 1700,
 975         .powered_by_linreg      = NULL,
 976         .trg_mask               = POWER_VDDMEMCTRL_TRG_MASK,
 977         .bo_irq                 = 0,
 978         .bo_enirq               = 0,
 979         .bo_offset_mask         = 0,
 980         .bo_offset_offset       = 0,
 981 };
 982 #endif
 983
 984 /**
 985  * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail
 986  * @cfg:                Configuration data of the DC-DC converter rail
 987  * @new_target:         New target voltage of the DC-DC converter rail
 988  * @new_brownout:       New brownout trigger voltage
 989  *
 990  * This function configures the output voltage on the DC-DC converter rail.
 991  * The rail is selected by the @cfg argument. The new voltage target is
 992  * selected by the @new_target and the voltage is specified in mV. The
 993  * new brownout value is selected by the @new_brownout argument and the
 994  * value is also in mV.
 995  */
 996 static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
 997                                 uint32_t new_target, uint32_t new_brownout)
 998 {
 999         struct mxs_power_regs *power_regs =
1000                 (struct mxs_power_regs *)MXS_POWER_BASE;
1001         uint32_t cur_target, diff, bo_int = 0;
1002         uint32_t powered_by_linreg = 0;
1003         int adjust_up, tmp;
1004
1005         new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout,
1006                                          cfg->step_mV);
1007
1008         cur_target = readl(cfg->reg);
1009         cur_target &= cfg->trg_mask;
1010         cur_target *= cfg->step_mV;
1011         cur_target += cfg->lowest_mV;
1012
1013         adjust_up = new_target > cur_target;
1014         if (cfg->powered_by_linreg)
1015                 powered_by_linreg = cfg->powered_by_linreg();
1016
1017         if (adjust_up && cfg->bo_irq) {
1018                 if (powered_by_linreg) {
1019                         bo_int = readl(cfg->reg);
1020                         clrbits_le32(cfg->reg, cfg->bo_enirq);
1021                 }
1022                 setbits_le32(cfg->reg, cfg->bo_offset_mask);
1023         }
1024
1025         do {
1026                 if (abs(new_target - cur_target) > 100) {
1027                         if (adjust_up)
1028                                 diff = cur_target + 100;
1029                         else
1030                                 diff = cur_target - 100;
1031                 } else {
1032                         diff = new_target;
1033                 }
1034
1035                 diff -= cfg->lowest_mV;
1036                 diff /= cfg->step_mV;
1037
1038                 clrsetbits_le32(cfg->reg, cfg->trg_mask, diff);
1039
1040                 if (powered_by_linreg ||
1041                         (readl(&power_regs->hw_power_sts) &
1042                                 POWER_STS_VDD5V_GT_VDDIO))
1043                         early_delay(500);
1044                 else {
1045                         for (;;) {
1046                                 tmp = readl(&power_regs->hw_power_sts);
1047                                 if (tmp & POWER_STS_DC_OK)
1048                                         break;
1049                         }
1050                 }
1051
1052                 cur_target = readl(cfg->reg);
1053                 cur_target &= cfg->trg_mask;
1054                 cur_target *= cfg->step_mV;
1055                 cur_target += cfg->lowest_mV;
1056         } while (new_target > cur_target);
1057
1058         if (cfg->bo_irq) {
1059                 if (adjust_up && powered_by_linreg) {
1060                         writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
1061                         if (bo_int & cfg->bo_enirq)
1062                                 setbits_le32(cfg->reg, cfg->bo_enirq);
1063                 }
1064
1065                 clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
1066                                 new_brownout << cfg->bo_offset_offset);
1067         }
1068 }
1069
1070 /**
1071  * mxs_setup_batt_detect() - Start the battery voltage measurement logic
1072  *
1073  * This function starts and configures the LRADC block. This allows the
1074  * power initialization code to measure battery voltage and based on this
1075  * knowledge, decide whether to boot at all, boot from battery or boot
1076  * from 5V input.
1077  */
1078 static void mxs_setup_batt_detect(void)
1079 {
1080         mxs_lradc_init();
1081         mxs_lradc_enable_batt_measurement();
1082         early_delay(10);
1083 }
1084
1085 /**
1086  * mxs_ungate_power() - Ungate the POWER block
1087  *
1088  * This function ungates clock to the power block. In case the power block
1089  * was still gated at this point, it will not be possible to configure the
1090  * block and therefore the power initialization would fail. This function
1091  * is only needed on i.MX233, on i.MX28 the power block is always ungated.
1092  */
1093 static void mxs_ungate_power(void)
1094 {
1095 #ifdef CONFIG_MX23
1096         struct mxs_power_regs *power_regs =
1097                 (struct mxs_power_regs *)MXS_POWER_BASE;
1098
1099         writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
1100 #endif
1101 }
1102
1103 /**
1104  * mxs_power_init() - The power block init main function
1105  *
1106  * This function calls all the power block initialization functions in
1107  * proper sequence to start the power block.
1108  */
1109 void mxs_power_init(void)
1110 {
1111         struct mxs_power_regs *power_regs =
1112                 (struct mxs_power_regs *)MXS_POWER_BASE;
1113
1114         mxs_ungate_power();
1115
1116         mxs_power_clock2xtal();
1117         mxs_power_set_auto_restart();
1118         mxs_power_set_linreg();
1119         mxs_power_setup_5v_detect();
1120
1121         mxs_setup_batt_detect();
1122
1123         mxs_power_configure_power_source();
1124         mxs_enable_output_rail_protection();
1125
1126         mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);
1127         mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
1128 #ifdef CONFIG_MX23
1129         mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
1130 #endif
1131         writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
1132                 POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
1133                 POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
1134                 POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
1135
1136         writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
1137
1138         early_delay(1000);
1139 }
1140
1141 #ifdef  CONFIG_SPL_MXS_PSWITCH_WAIT
1142 /**
1143  * mxs_power_wait_pswitch() - Wait for power switch to be pressed
1144  *
1145  * This function waits until the power-switch was pressed to start booting
1146  * the board.
1147  */
1148 void mxs_power_wait_pswitch(void)
1149 {
1150         struct mxs_power_regs *power_regs =
1151                 (struct mxs_power_regs *)MXS_POWER_BASE;
1152
1153         while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
1154                 ;
1155 }
1156 #endif