arch/arm/cpu/armv7/am33xx/sys_info.c

   1 /*
   2  * sys_info.c
   3  *
   4  * System information functions
   5  *
   6  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
   7  *
   8  * Derived from Beagle Board and 3430 SDP code by
   9  *      Richard Woodruff <r-woodruff2@ti.com>
  10  *      Syed Mohammed Khasim <khasim@ti.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #include <common.h>
  16 #include <asm/io.h>
  17 #include <asm/arch/sys_proto.h>
  18 #include <asm/arch/cpu.h>
  19 #include <asm/arch/clock.h>
  20 #include <power/tps65910.h>
  21
  22 struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
  23
  24 /**
  25  * get_cpu_rev(void) - extract rev info
  26  */
  27 u32 get_cpu_rev(void)
  28 {
  29         u32 id;
  30         u32 rev;
  31
  32         id = readl(DEVICE_ID);
  33         rev = (id >> 28) & 0xff;
  34
  35         return rev;
  36 }
  37
  38 /**
  39  * get_cpu_type(void) - extract cpu info
  40  */
  41 u32 get_cpu_type(void)
  42 {
  43         u32 id = 0;
  44         u32 partnum;
  45
  46         id = readl(DEVICE_ID);
  47         partnum = (id >> 12) & 0xffff;
  48
  49         return partnum;
  50 }
  51
  52 /**
  53  * get_board_rev() - setup to pass kernel board revision information
  54  * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
  55  */
  56 u32 get_board_rev(void)
  57 {
  58         return BOARD_REV_ID;
  59 }
  60
  61 /**
  62  * get_device_type(): tell if GP/HS/EMU/TST
  63  */
  64 u32 get_device_type(void)
  65 {
  66         int mode;
  67         mode = readl(&cstat->statusreg) & (DEVICE_MASK);
  68         return mode >>= 8;
  69 }
  70
  71 /**
  72  * get_sysboot_value(void) - return SYS_BOOT[4:0]
  73  */
  74 u32 get_sysboot_value(void)
  75 {
  76         int mode;
  77         mode = readl(&cstat->statusreg) & (SYSBOOT_MASK);
  78         return mode;
  79 }
  80
  81 #ifdef CONFIG_DISPLAY_CPUINFO
  82 /**
  83  * Print CPU information
  84  */
  85 int print_cpuinfo(void)
  86 {
  87         char *cpu_s, *sec_s;
  88
  89         switch (get_cpu_type()) {
  90         case AM335X:
  91                 cpu_s = "AM335X";
  92                 break;
  93         case TI81XX:
  94                 cpu_s = "TI81XX";
  95                 break;
  96         default:
  97                 cpu_s = "Unknown cpu type";
  98                 break;
  99         }
 100
 101         switch (get_device_type()) {
 102         case TST_DEVICE:
 103                 sec_s = "TST";
 104                 break;
 105         case EMU_DEVICE:
 106                 sec_s = "EMU";
 107                 break;
 108         case HS_DEVICE:
 109                 sec_s = "HS";
 110                 break;
 111         case GP_DEVICE:
 112                 sec_s = "GP";
 113                 break;
 114         default:
 115                 sec_s = "?";
 116         }
 117
 118         printf("%s-%s rev %d\n", cpu_s, sec_s, get_cpu_rev());
 119
 120         return 0;
 121 }
 122 #endif  /* CONFIG_DISPLAY_CPUINFO */
 123
 124 #ifdef CONFIG_AM33XX
 125 int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev)
 126 {
 127         int sil_rev;
 128
 129         sil_rev = readl(&cdev->deviceid) >> 28;
 130
 131         if (sil_rev == 1)
 132                 /* PG 2.0, efuse may not be set. */
 133                 return MPUPLL_M_800;
 134         else if (sil_rev >= 2) {
 135                 /* Check what the efuse says our max speed is. */
 136                 int efuse_arm_mpu_max_freq;
 137                 efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma);
 138                 switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) {
 139                 case AM335X_ZCZ_1000:
 140                         return MPUPLL_M_1000;
 141                 case AM335X_ZCZ_800:
 142                         return MPUPLL_M_800;
 143                 case AM335X_ZCZ_720:
 144                         return MPUPLL_M_720;
 145                 case AM335X_ZCZ_600:
 146                 case AM335X_ZCE_600:
 147                         return MPUPLL_M_600;
 148                 case AM335X_ZCZ_300:
 149                 case AM335X_ZCE_300:
 150                         return MPUPLL_M_300;
 151                 }
 152         }
 153
 154         /* PG 1.0 or otherwise unknown, use the PG1.0 max */
 155         return MPUPLL_M_720;
 156 }
 157
 158 int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
 159 {
 160         /* For PG2.1 and later, we have one set of values. */
 161         if (sil_rev >= 2) {
 162                 switch (frequency) {
 163                 case MPUPLL_M_1000:
 164                         return TPS65910_OP_REG_SEL_1_3_2_5;
 165                 case MPUPLL_M_800:
 166                         return TPS65910_OP_REG_SEL_1_2_6;
 167                 case MPUPLL_M_720:
 168                         return TPS65910_OP_REG_SEL_1_2_0;
 169                 case MPUPLL_M_600:
 170                 case MPUPLL_M_300:
 171                         return TPS65910_OP_REG_SEL_1_1_3;
 172                 }
 173         }
 174
 175         /* Default to PG1.0/PG2.0 values. */
 176         return TPS65910_OP_REG_SEL_1_1_3;
 177 }
 178 #endif