arch/arm/cpu/armv7/omap-common/boot-common.c

   1 /*
   2  * boot-common.c
   3  *
   4  * Common bootmode functions for omap based boards
   5  *
   6  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <spl.h>
  13 #include <asm/omap_common.h>
  14 #include <asm/arch/omap.h>
  15 #include <asm/arch/mmc_host_def.h>
  16 #include <asm/arch/sys_proto.h>
  17 #include <watchdog.h>
  18
  19 DECLARE_GLOBAL_DATA_PTR;
  20
  21 void save_omap_boot_params(void)
  22 {
  23         u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
  24         u8 boot_device;
  25         u32 dev_desc, dev_data;
  26
  27         if ((rom_params <  NON_SECURE_SRAM_START) ||
  28             (rom_params > NON_SECURE_SRAM_END))
  29                 return;
  30
  31         /*
  32          * rom_params can be type casted to omap_boot_parameters and
  33          * used. But it not correct to assume that romcode structure
  34          * encoding would be same as u-boot. So use the defined offsets.
  35          */
  36         gd->arch.omap_boot_params.omap_bootdevice = boot_device =
  37                                    *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
  38
  39         gd->arch.omap_boot_params.ch_flags =
  40                                 *((u8 *)(rom_params + CH_FLAGS_OFFSET));
  41
  42         if ((boot_device >= MMC_BOOT_DEVICES_START) &&
  43             (boot_device <= MMC_BOOT_DEVICES_END)) {
  44 #if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \
  45         !defined(CONFIG_AM43XX)
  46                 if ((omap_hw_init_context() ==
  47                                       OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
  48                         gd->arch.omap_boot_params.omap_bootmode =
  49                         *((u8 *)(rom_params + BOOT_MODE_OFFSET));
  50                 } else
  51 #endif
  52                 {
  53                         dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
  54                         dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
  55                         gd->arch.omap_boot_params.omap_bootmode =
  56                                         *((u32 *)(dev_data + BOOT_MODE_OFFSET));
  57                 }
  58         }
  59
  60 #ifdef CONFIG_DRA7XX
  61         /*
  62          * We get different values for QSPI_1 and QSPI_4 being used, but
  63          * don't actually care about this difference.  Rather than
  64          * mangle the later code, if we're coming in as QSPI_4 just
  65          * change to the QSPI_1 value.
  66          */
  67         if (gd->arch.omap_boot_params.omap_bootdevice == 11)
  68                 gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI;
  69 #endif
  70 }
  71
  72 #ifdef CONFIG_SPL_BUILD
  73 u32 spl_boot_device(void)
  74 {
  75         return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
  76 }
  77
  78 u32 spl_boot_mode(void)
  79 {
  80         u32 val = gd->arch.omap_boot_params.omap_bootmode;
  81
  82         if (val == MMCSD_MODE_RAW)
  83                 return MMCSD_MODE_RAW;
  84         else if (val == MMCSD_MODE_FAT)
  85                 return MMCSD_MODE_FAT;
  86         else
  87 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  88                 return MMCSD_MODE_EMMCBOOT;
  89 #else
  90                 return MMCSD_MODE_UNDEFINED;
  91 #endif
  92 }
  93
  94 void spl_board_init(void)
  95 {
  96 #ifdef CONFIG_SPL_NAND_SUPPORT
  97         gpmc_init();
  98 #endif
  99 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
 100         arch_misc_init();
 101 #endif
 102 #if defined(CONFIG_HW_WATCHDOG)
 103         hw_watchdog_init();
 104 #endif
 105 #ifdef CONFIG_AM33XX
 106         am33xx_spl_board_init();
 107 #endif
 108 }
 109
 110 int board_mmc_init(bd_t *bis)
 111 {
 112         switch (spl_boot_device()) {
 113         case BOOT_DEVICE_MMC1:
 114                 omap_mmc_init(0, 0, 0, -1, -1);
 115                 break;
 116         case BOOT_DEVICE_MMC2:
 117         case BOOT_DEVICE_MMC2_2:
 118                 omap_mmc_init(1, 0, 0, -1, -1);
 119                 break;
 120         }
 121         return 0;
 122 }
 123
 124 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 125 {
 126         typedef void __noreturn (*image_entry_noargs_t)(u32 *);
 127         image_entry_noargs_t image_entry =
 128                         (image_entry_noargs_t) spl_image->entry_point;
 129
 130         debug("image entry point: 0x%X\n", spl_image->entry_point);
 131         /* Pass the saved boot_params from rom code */
 132         image_entry((u32 *)&gd->arch.omap_boot_params);
 133 }
 134 #endif