]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/dts/exynos5800-peach-pi.dts
exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices
[karo-tx-uboot.git] / arch / arm / dts / exynos5800-peach-pi.dts
1 /*
2  * SAMSUNG/GOOGLE Peach-Pit board device tree source
3  *
4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 /dts-v1/;
11 #include "exynos54xx.dtsi"
12
13 / {
14         model = "Samsung/Google Peach Pi board based on Exynos5800";
15
16         compatible = "google,pit-rev#", "google,pit",
17                 "google,peach", "samsung,exynos5800", "samsung,exynos5";
18
19         config {
20                 google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
21                 hwid = "PIT TEST A-A 7848";
22                 lazy-init = <1>;
23         };
24
25         aliases {
26                 serial0 = "/serial@12C30000";
27                 console = "/serial@12C30000";
28                 pmic = "/i2c@12CA0000";
29                 i2c104 = &i2c_tunnel;
30         };
31
32         dmc {
33                 mem-manuf = "samsung";
34                 mem-type = "ddr3";
35                 clock-frequency = <800000000>;
36                 arm-frequency = <900000000>;
37         };
38
39         tmu@10060000 {
40                 samsung,min-temp        = <25>;
41                 samsung,max-temp        = <125>;
42                 samsung,start-warning   = <95>;
43                 samsung,start-tripping  = <105>;
44                 samsung,hw-tripping     = <110>;
45                 samsung,efuse-min-value = <40>;
46                 samsung,efuse-value     = <55>;
47                 samsung,efuse-max-value = <100>;
48                 samsung,slope           = <274761730>;
49                 samsung,dc-value        = <25>;
50         };
51
52         /* MAX77802 is on i2c bus 4 */
53         i2c@12CA0000 {
54                 clock-frequency = <400000>;
55                 power-regulator@9 {
56                         compatible = "maxim,max77802-pmic";
57                         reg = <0x9>;
58                 };
59         };
60
61         i2c@12CD0000 { /* i2c7 */
62                 clock-frequency = <100000>;
63                soundcodec@20 {
64                       reg = <0x20>;
65                       compatible = "maxim,max98090-codec";
66                };
67         };
68
69         sound@3830000 {
70                 samsung,codec-type = "max98090";
71         };
72
73         i2c@12E10000 { /* i2c9 */
74                 clock-frequency = <400000>;
75                 tpm@20 {
76                         compatible = "infineon,slb9645tt";
77                         reg = <0x20>;
78                 };
79         };
80
81         spi@12d30000 { /* spi1 */
82                 spi-max-frequency = <50000000>;
83                 firmware_storage_spi: flash@0 {
84                         reg = <0>;
85
86                         /*
87                          * A region for the kernel to store a panic event
88                          * which the firmware will add to the log.
89                         */
90                         elog-panic-event-offset = <0x01e00000 0x100000>;
91
92                         elog-shrink-size = <0x400>;
93                         elog-full-threshold = <0xc00>;
94                 };
95         };
96
97         xhci@12000000 {
98                 samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
99         };
100
101         xhci@12400000 {
102                 samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
103         };
104
105         fimd@14400000 {
106                 samsung,vl-freq = <60>;
107                 samsung,vl-col = <1920>;
108                 samsung,vl-row = <1080>;
109                 samsung,vl-width = <1920>;
110                 samsung,vl-height = <1080>;
111
112                 samsung,vl-clkp;
113                 samsung,vl-dp;
114                 samsung,vl-bpix = <4>;
115
116                 samsung,vl-hspw = <80>;
117                 samsung,vl-hbpd = <172>;
118                 samsung,vl-hfpd = <60>;
119                 samsung,vl-vspw = <10>;
120                 samsung,vl-vbpd = <25>;
121                 samsung,vl-vfpd = <10>;
122                 samsung,vl-cmd-allow-len = <0xf>;
123
124                 samsung,power-on-delay = <30000>;
125                 samsung,winid = <3>;
126                 samsung,interface-mode = <1>;
127                 samsung,dp-enabled = <1>;
128                 samsung,dual-lcd-enabled = <0>;
129
130                 samsung,bl-en-gpio = <&gpx2 2 GPIO_ACTIVE_HIGH>;
131         };
132 };
133
134 &spi_2 {
135         spi-max-frequency = <3125000>;
136         spi-deactivate-delay = <200>;
137         status = "okay";
138         num-cs = <1>;
139         samsung,spi-src-clk = <0>;
140         cs-gpios = <&gpb1 2 0>;
141
142         cros_ec: cros-ec@0 {
143                 compatible = "google,cros-ec-spi";
144                 interrupt-parent = <&gpx1>;
145                 interrupts = <5 0>;
146                 reg = <0>;
147                 spi-half-duplex;
148                 spi-max-timeout-ms = <1100>;
149                 ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
150
151                 /*
152                  * This describes the flash memory within the EC. Note
153                  * that the STM32L flash erases to 0, not 0xff.
154                  */
155                 #address-cells = <1>;
156                 #size-cells = <1>;
157                 flash@8000000 {
158                         reg = <0x08000000 0x20000>;
159                         erase-value = <0>;
160                 };
161
162                 controller-data {
163                         samsung,spi-feedback-delay = <1>;
164                 };
165
166                 i2c_tunnel: i2c-tunnel {
167                         compatible = "google,cros-ec-i2c-tunnel";
168                         #address-cells = <1>;
169                         #size-cells = <0>;
170                         google,remote-bus = <0>;
171
172                         battery: sbs-battery@b {
173                                 compatible = "sbs,sbs-battery";
174                                 reg = <0xb>;
175                                 sbs,poll-retry-count = <1>;
176                                 sbs,i2c-retry-count = <2>;
177                         };
178
179                         power-regulator@48 {
180                                 compatible = "ti,tps65090";
181                                 reg = <0x48>;
182
183                                 regulators {
184                                         tps65090_dcdc1: dcdc1 {
185                                                 ti,enable-ext-control;
186                                         };
187                                         tps65090_dcdc2: dcdc2 {
188                                                 ti,enable-ext-control;
189                                         };
190                                         tps65090_dcdc3: dcdc3 {
191                                                 ti,enable-ext-control;
192                                         };
193                                         tps65090_fet1: fet1 {
194                                                 regulator-name = "vcd_led";
195                                         };
196                                         tps65090_fet2: fet2 {
197                                                 regulator-name = "video_mid";
198                                                 regulator-always-on;
199                                         };
200                                         tps65090_fet3: fet3 {
201                                                 regulator-name = "wwan_r";
202                                                 regulator-always-on;
203                                         };
204                                         tps65090_fet4: fet4 {
205                                                 regulator-name = "sdcard";
206                                                 regulator-always-on;
207                                         };
208                                         tps65090_fet5: fet5 {
209                                                 regulator-name = "camout";
210                                                 regulator-always-on;
211                                         };
212                                         tps65090_fet6: fet6 {
213                                                 regulator-name = "lcd_vdd";
214                                         };
215                                         tps65090_fet7: fet7 {
216                                                 regulator-name = "video_mid_1a";
217                                                 regulator-always-on;
218                                         };
219                                         tps65090_ldo1: ldo1 {
220                                         };
221                                         tps65090_ldo2: ldo2 {
222                                         };
223                                 };
224
225                                 charger {
226                                         compatible = "ti,tps65090-charger";
227                                 };
228                         };
229                 };
230         };
231 };
232
233 #include "cros-ec-keyboard.dtsi"