]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/include/asm/arch-omap4/sys_proto.h
omap5: Add minimal support for omap5430.
[karo-tx-uboot.git] / arch / arm / include / asm / arch-omap4 / sys_proto.h
1 /*
2  * (C) Copyright 2010
3  * Texas Instruments, <www.ti.com>
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License as
7  * published by the Free Software Foundation; either version 2 of
8  * the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18  * MA 02111-1307 USA
19  */
20
21 #ifndef _SYS_PROTO_H_
22 #define _SYS_PROTO_H_
23
24 #include <asm/arch/omap.h>
25 #include <asm/arch/clocks.h>
26 #include <asm/io.h>
27 #include <asm/omap_common.h>
28 #include <asm/arch/mux_omap4.h>
29
30 struct omap_sysinfo {
31         char *board_string;
32 };
33 extern const struct omap_sysinfo sysinfo;
34
35 extern struct omap4_prcm_regs *const prcm;
36
37 void gpmc_init(void);
38 void watchdog_init(void);
39 u32 get_device_type(void);
40 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
41 void set_muxconf_regs_essential(void);
42 void set_muxconf_regs_non_essential(void);
43 void sr32(void *, u32, u32, u32);
44 u32 wait_on_value(u32, u32, void *, u32);
45 void sdelay(unsigned long);
46 void set_pl310_ctrl_reg(u32 val);
47 void omap_rev_string(char *omap_rev_string);
48 void setup_clocks_for_console(void);
49 void prcm_init(void);
50 void bypass_dpll(u32 *const base);
51 void freq_update_core(void);
52 u32 get_sys_clk_freq(void);
53 u32 omap4_ddr_clk(void);
54 void cancel_out(u32 *num, u32 *den, u32 den_limit);
55 void sdram_init(void);
56 u32 omap_sdram_size(void);
57 u32 cortex_rev(void);
58 void init_omap_revision(void);
59 void do_io_settings(void);
60
61 static inline u32 running_from_sdram(void)
62 {
63         u32 pc;
64         asm volatile ("mov %0, pc" : "=r" (pc));
65         return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
66             (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
67 }
68
69 static inline u8 uboot_loaded_by_spl(void)
70 {
71         /*
72          * Configuration Header is not supported yet, so u-boot init running
73          * from SDRAM implies that it was loaded by SPL. When this situation
74          * changes one of these approaches could be taken:
75          * i.  Pass a magic from SPL to U-Boot and U-Boot save it at a known
76          *     location.
77          * ii. Check the OPP. CH can support only 50% OPP while SPL initializes
78          *     the DPLLs at 100% OPP.
79          */
80         return running_from_sdram();
81 }
82 /*
83  * The basic hardware init of OMAP(s_init()) can happen in 4
84  * different contexts:
85  *  1. SPL running from SRAM
86  *  2. U-Boot running from FLASH
87  *  3. Non-XIP U-Boot loaded to SDRAM by SPL
88  *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
89  *     Configuration Header feature
90  *
91  * This function finds this context.
92  * Defining as inline may help in compiling out unused functions in SPL
93  */
94 static inline u32 omap_hw_init_context(void)
95 {
96 #ifdef CONFIG_SPL_BUILD
97         return OMAP_INIT_CONTEXT_SPL;
98 #else
99         if (uboot_loaded_by_spl())
100                 return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
101         else if (running_from_sdram())
102                 return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
103         else
104                 return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
105 #endif
106 }
107
108 static inline u32 omap_revision(void)
109 {
110         extern u32 *const omap4_revision;
111         return *omap4_revision;
112 }
113
114 #endif