]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/include/asm/arch-tegra/pinmux.h
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
[karo-tx-uboot.git] / arch / arm / include / asm / arch-tegra / pinmux.h
1 /*
2  * (C) Copyright 2010-2014
3  * NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef _TEGRA_PINMUX_H_
9 #define _TEGRA_PINMUX_H_
10
11 #include <asm/arch/tegra.h>
12
13 /* The pullup/pulldown state of a pin group */
14 enum pmux_pull {
15         PMUX_PULL_NORMAL = 0,
16         PMUX_PULL_DOWN,
17         PMUX_PULL_UP,
18 };
19
20 /* Defines whether a pin group is tristated or in normal operation */
21 enum pmux_tristate {
22         PMUX_TRI_NORMAL = 0,
23         PMUX_TRI_TRISTATE = 1,
24 };
25
26 #ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
27 enum pmux_pin_io {
28         PMUX_PIN_OUTPUT = 0,
29         PMUX_PIN_INPUT = 1,
30         PMUX_PIN_NONE,
31 };
32
33 enum pmux_pin_lock {
34         PMUX_PIN_LOCK_DEFAULT = 0,
35         PMUX_PIN_LOCK_DISABLE,
36         PMUX_PIN_LOCK_ENABLE,
37 };
38
39 enum pmux_pin_od {
40         PMUX_PIN_OD_DEFAULT = 0,
41         PMUX_PIN_OD_DISABLE,
42         PMUX_PIN_OD_ENABLE,
43 };
44
45 enum pmux_pin_ioreset {
46         PMUX_PIN_IO_RESET_DEFAULT = 0,
47         PMUX_PIN_IO_RESET_DISABLE,
48         PMUX_PIN_IO_RESET_ENABLE,
49 };
50
51 #ifdef TEGRA_PMX_HAS_RCV_SEL
52 enum pmux_pin_rcv_sel {
53         PMUX_PIN_RCV_SEL_DEFAULT = 0,
54         PMUX_PIN_RCV_SEL_NORMAL,
55         PMUX_PIN_RCV_SEL_HIGH,
56 };
57 #endif /* TEGRA_PMX_HAS_RCV_SEL */
58 #endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */
59
60 /*
61  * This defines the configuration for a pin, including the function assigned,
62  * pull up/down settings and tristate settings. Having set up one of these
63  * you can call pinmux_config_pingroup() to configure a pin in one step. Also
64  * available is pinmux_config_table() to configure a list of pins.
65  */
66 struct pmux_pingrp_config {
67         u32 pingrp:16;          /* pin group PMUX_PINGRP_...        */
68         u32 func:8;             /* function to assign PMUX_FUNC_... */
69         u32 pull:2;             /* pull up/down/normal PMUX_PULL_...*/
70         u32 tristate:2;         /* tristate or normal PMUX_TRI_...  */
71 #ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
72         u32 io:2;               /* input or output PMUX_PIN_...     */
73         u32 lock:2;             /* lock enable/disable PMUX_PIN...  */
74         u32 od:2;               /* open-drain or push-pull driver   */
75         u32 ioreset:2;          /* input/output reset PMUX_PIN...   */
76 #ifdef TEGRA_PMX_HAS_RCV_SEL
77         u32 rcv_sel:2;          /* select between High and Normal  */
78                                 /* VIL/VIH receivers */
79 #endif
80 #endif
81 };
82
83 /* Set the mux function for a pin group */
84 void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
85
86 /* Set the pull up/down feature for a pin group */
87 void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
88
89 /* Set a pin group to tristate */
90 void pinmux_tristate_enable(enum pmux_pingrp pin);
91
92 /* Set a pin group to normal (non tristate) */
93 void pinmux_tristate_disable(enum pmux_pingrp pin);
94
95 #ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
96 /* Set a pin group as input or output */
97 void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
98 #endif
99
100 /**
101  * Configure a list of pin groups
102  *
103  * @param config        List of config items
104  * @param len           Number of config items in list
105  */
106 void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
107                                 int len);
108
109 #ifdef TEGRA_PMX_HAS_DRVGRPS
110
111 #define PMUX_SLWF_MIN   0
112 #define PMUX_SLWF_MAX   3
113 #define PMUX_SLWF_NONE  -1
114
115 #define PMUX_SLWR_MIN   0
116 #define PMUX_SLWR_MAX   3
117 #define PMUX_SLWR_NONE  -1
118
119 #define PMUX_DRVUP_MIN  0
120 #define PMUX_DRVUP_MAX  127
121 #define PMUX_DRVUP_NONE -1
122
123 #define PMUX_DRVDN_MIN  0
124 #define PMUX_DRVDN_MAX  127
125 #define PMUX_DRVDN_NONE -1
126
127 /* Defines a pin group cfg's low-power mode select */
128 enum pmux_lpmd {
129         PMUX_LPMD_X8 = 0,
130         PMUX_LPMD_X4,
131         PMUX_LPMD_X2,
132         PMUX_LPMD_X,
133         PMUX_LPMD_NONE = -1,
134 };
135
136 /* Defines whether a pin group cfg's schmidt is enabled or not */
137 enum pmux_schmt {
138         PMUX_SCHMT_DISABLE = 0,
139         PMUX_SCHMT_ENABLE = 1,
140         PMUX_SCHMT_NONE = -1,
141 };
142
143 /* Defines whether a pin group cfg's high-speed mode is enabled or not */
144 enum pmux_hsm {
145         PMUX_HSM_DISABLE = 0,
146         PMUX_HSM_ENABLE = 1,
147         PMUX_HSM_NONE = -1,
148 };
149
150 /*
151  * This defines the configuration for a pin group's pad control config
152  */
153 struct pmux_drvgrp_config {
154         u32 drvgrp:16;  /* pin group PMUX_DRVGRP_x   */
155         u32 slwf:3;             /* falling edge slew         */
156         u32 slwr:3;             /* rising edge slew          */
157         u32 drvup:8;            /* pull-up drive strength    */
158         u32 drvdn:8;            /* pull-down drive strength  */
159         u32 lpmd:3;             /* low-power mode selection  */
160         u32 schmt:2;            /* schmidt enable            */
161         u32 hsm:2;              /* high-speed mode enable    */
162 };
163
164 /**
165  * Set the GP pad configs
166  *
167  * @param config        List of config items
168  * @param len           Number of config items in list
169  */
170 void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
171                                 int len);
172
173 #endif /* TEGRA_PMX_HAS_DRVGRPS */
174
175 struct pmux_pingrp_desc {
176         u8 funcs[4];
177 #if defined(CONFIG_TEGRA20)
178         u8 ctl_id;
179         u8 pull_id;
180 #endif /* CONFIG_TEGRA20 */
181 };
182
183 extern const struct pmux_pingrp_desc *tegra_soc_pingroups;
184
185 #endif /* _TEGRA_PINMUX_H_ */