]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/lib/bootm.c
Merge branch 'u-boot/master' into 'u-boot-arm/master'
[karo-tx-uboot.git] / arch / arm / lib / bootm.c
1 /* Copyright (C) 2011
2  * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
3  *  - Added prep subcommand support
4  *  - Reorganized source - modeled after powerpc version
5  *
6  * (C) Copyright 2002
7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8  * Marius Groeger <mgroeger@sysgo.de>
9  *
10  * Copyright (C) 2001  Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
11  *
12  * SPDX-License-Identifier:     GPL-2.0+
13  */
14
15 #include <common.h>
16 #include <command.h>
17 #include <image.h>
18 #include <u-boot/zlib.h>
19 #include <asm/byteorder.h>
20 #include <libfdt.h>
21 #include <fdt_support.h>
22 #include <asm/bootm.h>
23 #include <linux/compiler.h>
24
25 #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
26 #include <asm/armv7.h>
27 #endif
28
29 DECLARE_GLOBAL_DATA_PTR;
30
31 static struct tag *params;
32
33 static ulong get_sp(void)
34 {
35         ulong ret;
36
37         asm("mov %0, sp" : "=r"(ret) : );
38         return ret;
39 }
40
41 void arch_lmb_reserve(struct lmb *lmb)
42 {
43         ulong sp;
44
45         /*
46          * Booting a (Linux) kernel image
47          *
48          * Allocate space for command line and board info - the
49          * address should be as high as possible within the reach of
50          * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
51          * memory, which means far enough below the current stack
52          * pointer.
53          */
54         sp = get_sp();
55         debug("## Current stack ends at 0x%08lx ", sp);
56
57         /* adjust sp by 4K to be safe */
58         sp -= 4096;
59         lmb_reserve(lmb, sp,
60                     gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
61 }
62
63 /**
64  * announce_and_cleanup() - Print message and prepare for kernel boot
65  *
66  * @fake: non-zero to do everything except actually boot
67  */
68 static void announce_and_cleanup(int fake)
69 {
70         printf("\nStarting kernel ...%s\n\n", fake ?
71                 "(fake run for tracing)" : "");
72         bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
73 #ifdef CONFIG_BOOTSTAGE_FDT
74         bootstage_fdt_add_report();
75 #endif
76 #ifdef CONFIG_BOOTSTAGE_REPORT
77         bootstage_report();
78 #endif
79
80 #ifdef CONFIG_USB_DEVICE
81         udc_disconnect();
82 #endif
83         cleanup_before_linux();
84 }
85
86 static void setup_start_tag (bd_t *bd)
87 {
88         params = (struct tag *)bd->bi_boot_params;
89
90         params->hdr.tag = ATAG_CORE;
91         params->hdr.size = tag_size (tag_core);
92
93         params->u.core.flags = 0;
94         params->u.core.pagesize = 0;
95         params->u.core.rootdev = 0;
96
97         params = tag_next (params);
98 }
99
100 static void setup_memory_tags(bd_t *bd)
101 {
102         int i;
103
104         for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
105                 params->hdr.tag = ATAG_MEM;
106                 params->hdr.size = tag_size (tag_mem32);
107
108                 params->u.mem.start = bd->bi_dram[i].start;
109                 params->u.mem.size = bd->bi_dram[i].size;
110
111                 params = tag_next (params);
112         }
113 }
114
115 static void setup_commandline_tag(bd_t *bd, char *commandline)
116 {
117         char *p;
118
119         if (!commandline)
120                 return;
121
122         /* eat leading white space */
123         for (p = commandline; *p == ' '; p++);
124
125         /* skip non-existent command lines so the kernel will still
126          * use its default command line.
127          */
128         if (*p == '\0')
129                 return;
130
131         params->hdr.tag = ATAG_CMDLINE;
132         params->hdr.size =
133                 (sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2;
134
135         strcpy (params->u.cmdline.cmdline, p);
136
137         params = tag_next (params);
138 }
139
140 static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end)
141 {
142         /* an ATAG_INITRD node tells the kernel where the compressed
143          * ramdisk can be found. ATAG_RDIMG is a better name, actually.
144          */
145         params->hdr.tag = ATAG_INITRD2;
146         params->hdr.size = tag_size (tag_initrd);
147
148         params->u.initrd.start = initrd_start;
149         params->u.initrd.size = initrd_end - initrd_start;
150
151         params = tag_next (params);
152 }
153
154 static void setup_serial_tag(struct tag **tmp)
155 {
156         struct tag *params = *tmp;
157         struct tag_serialnr serialnr;
158
159         get_board_serial(&serialnr);
160         params->hdr.tag = ATAG_SERIAL;
161         params->hdr.size = tag_size (tag_serialnr);
162         params->u.serialnr.low = serialnr.low;
163         params->u.serialnr.high= serialnr.high;
164         params = tag_next (params);
165         *tmp = params;
166 }
167
168 static void setup_revision_tag(struct tag **in_params)
169 {
170         u32 rev = 0;
171
172         rev = get_board_rev();
173         params->hdr.tag = ATAG_REVISION;
174         params->hdr.size = tag_size (tag_revision);
175         params->u.revision.rev = rev;
176         params = tag_next (params);
177 }
178
179 static void setup_end_tag(bd_t *bd)
180 {
181         params->hdr.tag = ATAG_NONE;
182         params->hdr.size = 0;
183 }
184
185 __weak void setup_board_tags(struct tag **in_params) {}
186
187 static void do_nonsec_virt_switch(void)
188 {
189 #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
190         if (armv7_switch_nonsec() == 0)
191 #ifdef CONFIG_ARMV7_VIRT
192                 if (armv7_switch_hyp() == 0)
193                         debug("entered HYP mode\n");
194 #else
195                 debug("entered non-secure state\n");
196 #endif
197 #endif
198
199 #ifdef CONFIG_ARM64
200         smp_kick_all_cpus();
201         flush_dcache_all();     /* flush cache before swtiching to EL2 */
202         armv8_switch_to_el2();
203 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
204         armv8_switch_to_el1();
205 #endif
206 #endif
207 }
208
209 /* Subcommand: PREP */
210 static void boot_prep_linux(bootm_headers_t *images)
211 {
212         char *commandline = getenv("bootargs");
213
214         if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
215 #ifdef CONFIG_OF_LIBFDT
216                 debug("using: FDT\n");
217                 if (image_setup_linux(images)) {
218                         printf("FDT creation failed! hanging...");
219                         hang();
220                 }
221 #endif
222         } else if (BOOTM_ENABLE_TAGS) {
223                 debug("using: ATAGS\n");
224                 setup_start_tag(gd->bd);
225                 if (BOOTM_ENABLE_SERIAL_TAG)
226                         setup_serial_tag(&params);
227                 if (BOOTM_ENABLE_CMDLINE_TAG)
228                         setup_commandline_tag(gd->bd, commandline);
229                 if (BOOTM_ENABLE_REVISION_TAG)
230                         setup_revision_tag(&params);
231                 if (BOOTM_ENABLE_MEMORY_TAGS)
232                         setup_memory_tags(gd->bd);
233                 if (BOOTM_ENABLE_INITRD_TAG) {
234                         if (images->rd_start && images->rd_end) {
235                                 setup_initrd_tag(gd->bd, images->rd_start,
236                                                  images->rd_end);
237                         }
238                 }
239                 setup_board_tags(&params);
240                 setup_end_tag(gd->bd);
241         } else {
242                 printf("FDT and ATAGS support not compiled in - hanging\n");
243                 hang();
244         }
245         do_nonsec_virt_switch();
246 }
247
248 /* Subcommand: GO */
249 static void boot_jump_linux(bootm_headers_t *images, int flag)
250 {
251 #ifdef CONFIG_ARM64
252         void (*kernel_entry)(void *fdt_addr);
253         int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
254
255         kernel_entry = (void (*)(void *fdt_addr))images->ep;
256
257         debug("## Transferring control to Linux (at address %lx)...\n",
258                 (ulong) kernel_entry);
259         bootstage_mark(BOOTSTAGE_ID_RUN_OS);
260
261         announce_and_cleanup(fake);
262
263         if (!fake)
264                 kernel_entry(images->ft_addr);
265 #else
266         unsigned long machid = gd->bd->bi_arch_number;
267         char *s;
268         void (*kernel_entry)(int zero, int arch, uint params);
269         unsigned long r2;
270         int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
271
272         kernel_entry = (void (*)(int, int, uint))images->ep;
273
274         s = getenv("machid");
275         if (s) {
276                 strict_strtoul(s, 16, &machid);
277                 printf("Using machid 0x%lx from environment\n", machid);
278         }
279
280         debug("## Transferring control to Linux (at address %08lx)" \
281                 "...\n", (ulong) kernel_entry);
282         bootstage_mark(BOOTSTAGE_ID_RUN_OS);
283         announce_and_cleanup(fake);
284
285         if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len)
286                 r2 = (unsigned long)images->ft_addr;
287         else
288                 r2 = gd->bd->bi_boot_params;
289
290         if (!fake)
291                 kernel_entry(0, machid, r2);
292 #endif
293 }
294
295 /* Main Entry point for arm bootm implementation
296  *
297  * Modeled after the powerpc implementation
298  * DIFFERENCE: Instead of calling prep and go at the end
299  * they are called if subcommand is equal 0.
300  */
301 int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
302 {
303         /* No need for those on ARM */
304         if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE)
305                 return -1;
306
307         if (flag & BOOTM_STATE_OS_PREP) {
308                 boot_prep_linux(images);
309                 return 0;
310         }
311
312         if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
313                 boot_jump_linux(images, flag);
314                 return 0;
315         }
316
317         boot_prep_linux(images);
318         boot_jump_linux(images, flag);
319         return 0;
320 }
321
322 #ifdef CONFIG_CMD_BOOTZ
323
324 struct zimage_header {
325         uint32_t        code[9];
326         uint32_t        zi_magic;
327         uint32_t        zi_start;
328         uint32_t        zi_end;
329 };
330
331 #define LINUX_ARM_ZIMAGE_MAGIC  0x016f2818
332
333 int bootz_setup(ulong image, ulong *start, ulong *end)
334 {
335         struct zimage_header *zi;
336
337         zi = (struct zimage_header *)map_sysmem(image, 0);
338         if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC) {
339                 puts("Bad Linux ARM zImage magic!\n");
340                 return 1;
341         }
342
343         *start = zi->zi_start;
344         *end = zi->zi_end;
345
346         printf("Kernel image @ %#08lx [ %#08lx - %#08lx ]\n", image, *start,
347               *end);
348
349         return 0;
350 }
351
352 #endif  /* CONFIG_CMD_BOOTZ */
353
354 #if defined(CONFIG_BOOTM_VXWORKS)
355 void boot_prep_vxworks(bootm_headers_t *images)
356 {
357 #if defined(CONFIG_OF_LIBFDT)
358         int off;
359
360         if (images->ft_addr) {
361                 off = fdt_path_offset(images->ft_addr, "/memory");
362                 if (off < 0) {
363                         if (arch_fixup_memory_node(images->ft_addr))
364                                 puts("## WARNING: fixup memory failed!\n");
365                 }
366         }
367 #endif
368         cleanup_before_linux();
369 }
370 void boot_jump_vxworks(bootm_headers_t *images)
371 {
372         /* ARM VxWorks requires device tree physical address to be passed */
373         ((void (*)(void *))images->ep)(images->ft_addr);
374 }
375 #endif