]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/blackfin/cpu/gpio.c
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
[karo-tx-uboot.git] / arch / blackfin / cpu / gpio.c
1 /*
2  * ADI GPIO1 Abstraction Layer
3  * Support BF50x, BF51x, BF52x, BF53x and BF561 only.
4  *
5  * Copyright 2006-2010 Analog Devices Inc.
6  *
7  * Licensed under the GPL-2 or later
8  */
9
10 #include <common.h>
11 #include <asm/errno.h>
12 #include <asm/gpio.h>
13 #include <asm/portmux.h>
14
15 #ifndef CONFIG_ADI_GPIO2
16 #if ANOMALY_05000311 || ANOMALY_05000323
17 enum {
18         AWA_data = SYSCR,
19         AWA_data_clear = SYSCR,
20         AWA_data_set = SYSCR,
21         AWA_toggle = SYSCR,
22         AWA_maska = UART_SCR,
23         AWA_maska_clear = UART_SCR,
24         AWA_maska_set = UART_SCR,
25         AWA_maska_toggle = UART_SCR,
26         AWA_maskb = UART_GCTL,
27         AWA_maskb_clear = UART_GCTL,
28         AWA_maskb_set = UART_GCTL,
29         AWA_maskb_toggle = UART_GCTL,
30         AWA_dir = SPORT1_STAT,
31         AWA_polar = SPORT1_STAT,
32         AWA_edge = SPORT1_STAT,
33         AWA_both = SPORT1_STAT,
34 #if ANOMALY_05000311
35         AWA_inen = TIMER_ENABLE,
36 #elif ANOMALY_05000323
37         AWA_inen = DMA1_1_CONFIG,
38 #endif
39 };
40         /* Anomaly Workaround */
41 #define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
42 #else
43 #define AWA_DUMMY_READ(...)  do { } while (0)
44 #endif
45
46 static struct gpio_port_t * const gpio_array[] = {
47 #if defined(BF533_FAMILY)
48         (struct gpio_port_t *) FIO_FLAG_D,
49 #elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \
50         || defined(BF538_FAMILY) || defined(CONFIG_BF50x)
51         (struct gpio_port_t *) PORTFIO,
52 # if !defined(BF538_FAMILY)
53         (struct gpio_port_t *) PORTGIO,
54         (struct gpio_port_t *) PORTHIO,
55 # endif
56 #elif defined(BF561_FAMILY)
57         (struct gpio_port_t *) FIO0_FLAG_D,
58         (struct gpio_port_t *) FIO1_FLAG_D,
59         (struct gpio_port_t *) FIO2_FLAG_D,
60 #else
61 # error no gpio arrays defined
62 #endif
63 };
64
65 #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \
66     defined(CONFIG_BF50x)
67 static unsigned short * const port_fer[] = {
68         (unsigned short *) PORTF_FER,
69         (unsigned short *) PORTG_FER,
70         (unsigned short *) PORTH_FER,
71 };
72
73 # if !defined(BF537_FAMILY)
74 static unsigned short * const port_mux[] = {
75         (unsigned short *) PORTF_MUX,
76         (unsigned short *) PORTG_MUX,
77         (unsigned short *) PORTH_MUX,
78 };
79
80 static const
81 u8 pmux_offset[][16] = {
82 #  if defined(CONFIG_BF52x)
83         { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
84         { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
85         { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
86 #  elif defined(CONFIG_BF51x)
87         { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
88         { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
89         { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
90 #  endif
91 };
92 # endif
93
94 #elif defined(BF538_FAMILY)
95 static unsigned short * const port_fer[] = {
96         (unsigned short *) PORTCIO_FER,
97         (unsigned short *) PORTDIO_FER,
98         (unsigned short *) PORTEIO_FER,
99 };
100 #endif
101
102 #ifdef CONFIG_BFIN_GPIO_TRACK
103 #define RESOURCE_LABEL_SIZE     16
104
105 static struct str_ident {
106         char name[RESOURCE_LABEL_SIZE];
107 } str_ident[MAX_RESOURCES];
108
109 static void gpio_error(unsigned gpio)
110 {
111         printf("bfin-gpio: GPIO %d wasn't requested!\n", gpio);
112 }
113
114 static void set_label(unsigned short ident, const char *label)
115 {
116         if (label) {
117                 strncpy(str_ident[ident].name, label,
118                          RESOURCE_LABEL_SIZE);
119                 str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
120         }
121 }
122
123 static char *get_label(unsigned short ident)
124 {
125         return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
126 }
127
128 static int cmp_label(unsigned short ident, const char *label)
129 {
130         if (label == NULL)
131                 printf("bfin-gpio: please provide none-null label\n");
132
133         if (label)
134                 return strcmp(str_ident[ident].name, label);
135         else
136                 return -EINVAL;
137 }
138
139 #define map_entry(m, i)      reserved_##m##_map[gpio_bank(i)]
140 #define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
141 #define reserve(m, i)        (map_entry(m, i) |= gpio_bit(i))
142 #define unreserve(m, i)      (map_entry(m, i) &= ~gpio_bit(i))
143 #define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
144 #else
145 #define is_reserved(m, i, e) (!(e))
146 #define reserve(m, i)
147 #define unreserve(m, i)
148 #define DECLARE_RESERVED_MAP(m, c)
149 #define gpio_error(gpio)
150 #define set_label(...)
151 #define get_label(...) ""
152 #define cmp_label(...) 1
153 #endif
154
155 DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
156 DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
157
158 inline int check_gpio(unsigned gpio)
159 {
160         if (gpio >= MAX_BLACKFIN_GPIOS)
161                 return -EINVAL;
162         return 0;
163 }
164
165 static void port_setup(unsigned gpio, unsigned short usage)
166 {
167 #if defined(BF538_FAMILY)
168         /*
169          * BF538/9 Port C,D and E are special.
170          * Inverted PORT_FER polarity on CDE and no PORF_FER on F
171          * Regular PORT F GPIOs are handled here, CDE are exclusively
172          * managed by GPIOLIB
173          */
174
175         if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
176                 return;
177
178         gpio -= MAX_BLACKFIN_GPIOS;
179
180         if (usage == GPIO_USAGE)
181                 *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
182         else
183                 *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
184         SSYNC();
185         return;
186 #endif
187
188         if (check_gpio(gpio))
189                 return;
190
191 #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \
192     defined(CONFIG_BF50x)
193         if (usage == GPIO_USAGE)
194                 *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
195         else
196                 *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
197         SSYNC();
198 #endif
199 }
200
201 #ifdef BF537_FAMILY
202 static struct {
203         unsigned short res;
204         unsigned short offset;
205 } port_mux_lut[] = {
206         {.res = P_PPI0_D13, .offset = 11},
207         {.res = P_PPI0_D14, .offset = 11},
208         {.res = P_PPI0_D15, .offset = 11},
209         {.res = P_SPORT1_TFS, .offset = 11},
210         {.res = P_SPORT1_TSCLK, .offset = 11},
211         {.res = P_SPORT1_DTPRI, .offset = 11},
212         {.res = P_PPI0_D10, .offset = 10},
213         {.res = P_PPI0_D11, .offset = 10},
214         {.res = P_PPI0_D12, .offset = 10},
215         {.res = P_SPORT1_RSCLK, .offset = 10},
216         {.res = P_SPORT1_RFS, .offset = 10},
217         {.res = P_SPORT1_DRPRI, .offset = 10},
218         {.res = P_PPI0_D8, .offset = 9},
219         {.res = P_PPI0_D9, .offset = 9},
220         {.res = P_SPORT1_DRSEC, .offset = 9},
221         {.res = P_SPORT1_DTSEC, .offset = 9},
222         {.res = P_TMR2, .offset = 8},
223         {.res = P_PPI0_FS3, .offset = 8},
224         {.res = P_TMR3, .offset = 7},
225         {.res = P_SPI0_SSEL4, .offset = 7},
226         {.res = P_TMR4, .offset = 6},
227         {.res = P_SPI0_SSEL5, .offset = 6},
228         {.res = P_TMR5, .offset = 5},
229         {.res = P_SPI0_SSEL6, .offset = 5},
230         {.res = P_UART1_RX, .offset = 4},
231         {.res = P_UART1_TX, .offset = 4},
232         {.res = P_TMR6, .offset = 4},
233         {.res = P_TMR7, .offset = 4},
234         {.res = P_UART0_RX, .offset = 3},
235         {.res = P_UART0_TX, .offset = 3},
236         {.res = P_DMAR0, .offset = 3},
237         {.res = P_DMAR1, .offset = 3},
238         {.res = P_SPORT0_DTSEC, .offset = 1},
239         {.res = P_SPORT0_DRSEC, .offset = 1},
240         {.res = P_CAN0_RX, .offset = 1},
241         {.res = P_CAN0_TX, .offset = 1},
242         {.res = P_SPI0_SSEL7, .offset = 1},
243         {.res = P_SPORT0_TFS, .offset = 0},
244         {.res = P_SPORT0_DTPRI, .offset = 0},
245         {.res = P_SPI0_SSEL2, .offset = 0},
246         {.res = P_SPI0_SSEL3, .offset = 0},
247 };
248
249 static void portmux_setup(unsigned short per)
250 {
251         u16 y, offset, muxreg, mask;
252         u16 function = P_FUNCT2MUX(per);
253
254         for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
255                 if (port_mux_lut[y].res == per) {
256
257                         /* SET PORTMUX REG */
258
259                         offset = port_mux_lut[y].offset;
260                         muxreg = bfin_read_PORT_MUX();
261
262                         if (offset == 1)
263                                 mask = 3;
264                         else
265                                 mask = 1;
266
267                         muxreg &= ~(mask << offset);
268                         muxreg |= ((function & mask) << offset);
269                         bfin_write_PORT_MUX(muxreg);
270                 }
271         }
272 }
273 #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
274 inline void portmux_setup(unsigned short per)
275 {
276         u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
277         u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
278
279         pmux = *port_mux[gpio_bank(ident)];
280         pmux &= ~(3 << offset);
281         pmux |= (function & 3) << offset;
282         *port_mux[gpio_bank(ident)] = pmux;
283         SSYNC();
284 }
285 #else
286 # define portmux_setup(...)  do { } while (0)
287 #endif
288
289 /***********************************************************
290 *
291 * FUNCTIONS: Blackfin General Purpose Ports Access Functions
292 *
293 * INPUTS/OUTPUTS:
294 * gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
295 *
296 *
297 * DESCRIPTION: These functions abstract direct register access
298 *              to Blackfin processor General Purpose
299 *              Ports Regsiters
300 *
301 * CAUTION: These functions do not belong to the GPIO Driver API
302 *************************************************************
303 * MODIFICATION HISTORY :
304 **************************************************************/
305
306 /* Set a specific bit */
307
308 #define SET_GPIO(name) \
309 void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
310 { \
311         unsigned long flags; \
312         local_irq_save(flags); \
313         if (arg) \
314                 gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
315         else \
316                 gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
317         AWA_DUMMY_READ(name); \
318         local_irq_restore(flags); \
319 }
320
321 SET_GPIO(dir)   /* set_gpio_dir() */
322 SET_GPIO(inen)  /* set_gpio_inen() */
323 SET_GPIO(polar) /* set_gpio_polar() */
324 SET_GPIO(edge)  /* set_gpio_edge() */
325 SET_GPIO(both)  /* set_gpio_both() */
326
327
328 #define SET_GPIO_SC(name) \
329 void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
330 { \
331         unsigned long flags; \
332         if (ANOMALY_05000311 || ANOMALY_05000323) \
333                 local_irq_save(flags); \
334         if (arg) \
335                 gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
336         else \
337                 gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
338         if (ANOMALY_05000311 || ANOMALY_05000323) { \
339                 AWA_DUMMY_READ(name); \
340                 local_irq_restore(flags); \
341         } \
342 }
343
344 SET_GPIO_SC(maska)
345 SET_GPIO_SC(maskb)
346 SET_GPIO_SC(data)
347
348 void set_gpio_toggle(unsigned gpio)
349 {
350         unsigned long flags;
351         if (ANOMALY_05000311 || ANOMALY_05000323)
352                 local_irq_save(flags);
353         gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
354         if (ANOMALY_05000311 || ANOMALY_05000323) {
355                 AWA_DUMMY_READ(toggle);
356                 local_irq_restore(flags);
357         }
358 }
359
360 /* Set current PORT date (16-bit word) */
361
362 #define SET_GPIO_P(name) \
363 void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
364 { \
365         unsigned long flags; \
366         if (ANOMALY_05000311 || ANOMALY_05000323) \
367                 local_irq_save(flags); \
368         gpio_array[gpio_bank(gpio)]->name = arg; \
369         if (ANOMALY_05000311 || ANOMALY_05000323) { \
370                 AWA_DUMMY_READ(name); \
371                 local_irq_restore(flags); \
372         } \
373 }
374
375 SET_GPIO_P(data)
376 SET_GPIO_P(dir)
377 SET_GPIO_P(inen)
378 SET_GPIO_P(polar)
379 SET_GPIO_P(edge)
380 SET_GPIO_P(both)
381 SET_GPIO_P(maska)
382 SET_GPIO_P(maskb)
383
384 /* Get a specific bit */
385 #define GET_GPIO(name) \
386 unsigned short get_gpio_ ## name(unsigned gpio) \
387 { \
388         unsigned long flags; \
389         unsigned short ret; \
390         if (ANOMALY_05000311 || ANOMALY_05000323) \
391                 local_irq_save(flags); \
392         ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
393         if (ANOMALY_05000311 || ANOMALY_05000323) { \
394                 AWA_DUMMY_READ(name); \
395                 local_irq_restore(flags); \
396         } \
397         return ret; \
398 }
399
400 GET_GPIO(data)
401 GET_GPIO(dir)
402 GET_GPIO(inen)
403 GET_GPIO(polar)
404 GET_GPIO(edge)
405 GET_GPIO(both)
406 GET_GPIO(maska)
407 GET_GPIO(maskb)
408
409 /* Get current PORT date (16-bit word) */
410
411 #define GET_GPIO_P(name) \
412 unsigned short get_gpiop_ ## name(unsigned gpio) \
413 { \
414         unsigned long flags; \
415         unsigned short ret; \
416         if (ANOMALY_05000311 || ANOMALY_05000323) \
417                 local_irq_save(flags); \
418         ret = (gpio_array[gpio_bank(gpio)]->name); \
419         if (ANOMALY_05000311 || ANOMALY_05000323) { \
420                 AWA_DUMMY_READ(name); \
421                 local_irq_restore(flags); \
422         } \
423         return ret; \
424 }
425
426 GET_GPIO_P(data)
427 GET_GPIO_P(dir)
428 GET_GPIO_P(inen)
429 GET_GPIO_P(polar)
430 GET_GPIO_P(edge)
431 GET_GPIO_P(both)
432 GET_GPIO_P(maska)
433 GET_GPIO_P(maskb)
434
435 /***********************************************************
436 *
437 * FUNCTIONS:    Blackfin Peripheral Resource Allocation
438 *               and PortMux Setup
439 *
440 * INPUTS/OUTPUTS:
441 * per   Peripheral Identifier
442 * label String
443 *
444 * DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
445 *
446 * CAUTION:
447 *************************************************************
448 * MODIFICATION HISTORY :
449 **************************************************************/
450
451 int peripheral_request(unsigned short per, const char *label)
452 {
453         unsigned short ident = P_IDENT(per);
454
455         /*
456          * Don't cares are pins with only one dedicated function
457          */
458
459         if (per & P_DONTCARE)
460                 return 0;
461
462         if (!(per & P_DEFINED))
463                 return -ENODEV;
464
465         BUG_ON(ident >= MAX_RESOURCES);
466
467         /* If a pin can be muxed as either GPIO or peripheral, make
468          * sure it is not already a GPIO pin when we request it.
469          */
470         if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
471                 printf("%s: Peripheral %d is already reserved as GPIO by %s !\n",
472                        __func__, ident, get_label(ident));
473                 return -EBUSY;
474         }
475
476         if (unlikely(is_reserved(peri, ident, 1))) {
477
478                 /*
479                  * Pin functions like AMC address strobes my
480                  * be requested and used by several drivers
481                  */
482
483                 if (!(per & P_MAYSHARE)) {
484                         /*
485                          * Allow that the identical pin function can
486                          * be requested from the same driver twice
487                          */
488
489                         if (cmp_label(ident, label) == 0)
490                                 goto anyway;
491
492                         printf("%s: Peripheral %d function %d is already reserved by %s !\n",
493                                __func__, ident, P_FUNCT2MUX(per), get_label(ident));
494                         return -EBUSY;
495                 }
496         }
497
498  anyway:
499         reserve(peri, ident);
500
501         portmux_setup(per);
502         port_setup(ident, PERIPHERAL_USAGE);
503
504         set_label(ident, label);
505
506         return 0;
507 }
508
509 int peripheral_request_list(const unsigned short per[], const char *label)
510 {
511         u16 cnt;
512         int ret;
513
514         for (cnt = 0; per[cnt] != 0; cnt++) {
515
516                 ret = peripheral_request(per[cnt], label);
517
518                 if (ret < 0) {
519                         for ( ; cnt > 0; cnt--)
520                                 peripheral_free(per[cnt - 1]);
521
522                         return ret;
523                 }
524         }
525
526         return 0;
527 }
528
529 void peripheral_free(unsigned short per)
530 {
531         unsigned short ident = P_IDENT(per);
532
533         if (per & P_DONTCARE)
534                 return;
535
536         if (!(per & P_DEFINED))
537                 return;
538
539         if (unlikely(!is_reserved(peri, ident, 0)))
540                 return;
541
542         if (!(per & P_MAYSHARE))
543                 port_setup(ident, GPIO_USAGE);
544
545         unreserve(peri, ident);
546
547         set_label(ident, "free");
548 }
549
550 void peripheral_free_list(const unsigned short per[])
551 {
552         u16 cnt;
553         for (cnt = 0; per[cnt] != 0; cnt++)
554                 peripheral_free(per[cnt]);
555 }
556
557 /***********************************************************
558 *
559 * FUNCTIONS: Blackfin GPIO Driver
560 *
561 * INPUTS/OUTPUTS:
562 * gpio  PIO Number between 0 and MAX_BLACKFIN_GPIOS
563 * label String
564 *
565 * DESCRIPTION: Blackfin GPIO Driver API
566 *
567 * CAUTION:
568 *************************************************************
569 * MODIFICATION HISTORY :
570 **************************************************************/
571
572 int gpio_request(unsigned gpio, const char *label)
573 {
574         if (check_gpio(gpio) < 0)
575                 return -EINVAL;
576
577         /*
578          * Allow that the identical GPIO can
579          * be requested from the same driver twice
580          * Do nothing and return -
581          */
582
583         if (cmp_label(gpio, label) == 0)
584                 return 0;
585
586         if (unlikely(is_reserved(gpio, gpio, 1))) {
587                 printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
588                        gpio, get_label(gpio));
589                 return -EBUSY;
590         }
591         if (unlikely(is_reserved(peri, gpio, 1))) {
592                 printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
593                        gpio, get_label(gpio));
594                 return -EBUSY;
595         }
596         else {  /* Reset POLAR setting when acquiring a gpio for the first time */
597                 set_gpio_polar(gpio, 0);
598         }
599
600         reserve(gpio, gpio);
601         set_label(gpio, label);
602
603         port_setup(gpio, GPIO_USAGE);
604
605         return 0;
606 }
607
608 int gpio_free(unsigned gpio)
609 {
610         if (check_gpio(gpio) < 0)
611                 return -1;
612
613         if (unlikely(!is_reserved(gpio, gpio, 0))) {
614                 gpio_error(gpio);
615                 return -1;
616         }
617
618         unreserve(gpio, gpio);
619
620         set_label(gpio, "free");
621
622         return 0;
623 }
624
625 #ifdef ADI_SPECIAL_GPIO_BANKS
626 DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
627
628 int special_gpio_request(unsigned gpio, const char *label)
629 {
630         /*
631          * Allow that the identical GPIO can
632          * be requested from the same driver twice
633          * Do nothing and return -
634          */
635
636         if (cmp_label(gpio, label) == 0)
637                 return 0;
638
639         if (unlikely(is_reserved(special_gpio, gpio, 1))) {
640                 printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
641                        gpio, get_label(gpio));
642                 return -EBUSY;
643         }
644         if (unlikely(is_reserved(peri, gpio, 1))) {
645                 printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
646                        gpio, get_label(gpio));
647
648                 return -EBUSY;
649         }
650
651         reserve(special_gpio, gpio);
652         reserve(peri, gpio);
653
654         set_label(gpio, label);
655         port_setup(gpio, GPIO_USAGE);
656
657         return 0;
658 }
659
660 void special_gpio_free(unsigned gpio)
661 {
662         if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
663                 gpio_error(gpio);
664                 return;
665         }
666
667         unreserve(special_gpio, gpio);
668         unreserve(peri, gpio);
669         set_label(gpio, "free");
670 }
671 #endif
672
673 static inline void __gpio_direction_input(unsigned gpio)
674 {
675         gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
676         gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
677 }
678
679 int gpio_direction_input(unsigned gpio)
680 {
681         unsigned long flags;
682
683         if (!is_reserved(gpio, gpio, 0)) {
684                 gpio_error(gpio);
685                 return -EINVAL;
686         }
687
688         local_irq_save(flags);
689         __gpio_direction_input(gpio);
690         AWA_DUMMY_READ(inen);
691         local_irq_restore(flags);
692
693         return 0;
694 }
695
696 int gpio_set_value(unsigned gpio, int arg)
697 {
698         if (arg)
699                 gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
700         else
701                 gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
702
703         return 0;
704 }
705
706 int gpio_direction_output(unsigned gpio, int value)
707 {
708         unsigned long flags;
709
710         if (!is_reserved(gpio, gpio, 0)) {
711                 gpio_error(gpio);
712                 return -EINVAL;
713         }
714
715         local_irq_save(flags);
716
717         gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
718         gpio_set_value(gpio, value);
719         gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
720
721         AWA_DUMMY_READ(dir);
722         local_irq_restore(flags);
723
724         return 0;
725 }
726
727 int gpio_get_value(unsigned gpio)
728 {
729         unsigned long flags;
730
731         if (unlikely(get_gpio_edge(gpio))) {
732                 int ret;
733                 local_irq_save(flags);
734                 set_gpio_edge(gpio, 0);
735                 ret = get_gpio_data(gpio);
736                 set_gpio_edge(gpio, 1);
737                 local_irq_restore(flags);
738                 return ret;
739         } else
740                 return get_gpio_data(gpio);
741 }
742
743 /* If we are booting from SPI and our board lacks a strong enough pull up,
744  * the core can reset and execute the bootrom faster than the resistor can
745  * pull the signal logically high.  To work around this (common) error in
746  * board design, we explicitly set the pin back to GPIO mode, force /CS
747  * high, and wait for the electrons to do their thing.
748  *
749  * This function only makes sense to be called from reset code, but it
750  * lives here as we need to force all the GPIO states w/out going through
751  * BUG() checks and such.
752  */
753 void bfin_reset_boot_spi_cs(unsigned short pin)
754 {
755         unsigned short gpio = P_IDENT(pin);
756         port_setup(gpio, GPIO_USAGE);
757         gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
758         AWA_DUMMY_READ(data_set);
759         udelay(1);
760 }
761
762 void gpio_labels(void)
763 {
764         int c, gpio;
765
766         for (c = 0; c < MAX_RESOURCES; c++) {
767                 gpio = is_reserved(gpio, c, 1);
768                 if (!check_gpio(c) && gpio)
769                         printf("GPIO_%d:\t%s\tGPIO %s\n", c,
770                                 get_label(c),
771                                 get_gpio_dir(c) ? "OUTPUT" : "INPUT");
772                 else if (is_reserved(peri, c, 1))
773                         printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
774                 else
775                         continue;
776         }
777 }
778 #else
779 struct gpio_port_t * const gpio_array[] = {
780         (struct gpio_port_t *)PORTA_FER,
781         (struct gpio_port_t *)PORTB_FER,
782         (struct gpio_port_t *)PORTC_FER,
783         (struct gpio_port_t *)PORTD_FER,
784         (struct gpio_port_t *)PORTE_FER,
785         (struct gpio_port_t *)PORTF_FER,
786         (struct gpio_port_t *)PORTG_FER,
787 #if defined(CONFIG_BF54x)
788         (struct gpio_port_t *)PORTH_FER,
789         (struct gpio_port_t *)PORTI_FER,
790         (struct gpio_port_t *)PORTJ_FER,
791 #endif
792 };
793 #endif