]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/m68k/lib/time.c
Merge branch 'karo-tx-uboot' into kc-merge
[karo-tx-uboot.git] / arch / m68k / lib / time.c
1 /*
2  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
3  *
4  * (C) Copyright 2000
5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #include <common.h>
11
12 #include <asm/timer.h>
13 #include <asm/immap.h>
14 #include <watchdog.h>
15
16 DECLARE_GLOBAL_DATA_PTR;
17
18 static volatile ulong timestamp = 0;
19
20 #ifndef CONFIG_SYS_WATCHDOG_FREQ
21 #define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 2)
22 #endif
23
24 #if defined(CONFIG_MCFTMR)
25 #ifndef CONFIG_SYS_UDELAY_BASE
26 #       error   "uDelay base not defined!"
27 #endif
28
29 #if !defined(CONFIG_SYS_TMR_BASE) || !defined(CONFIG_SYS_INTR_BASE) || !defined(CONFIG_SYS_TMRINTR_NO) || !defined(CONFIG_SYS_TMRINTR_MASK)
30 #       error   "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
31 #endif
32 extern void dtimer_intr_setup(void);
33
34 void __udelay(unsigned long usec)
35 {
36         volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_UDELAY_BASE);
37         uint start, now, tmp;
38
39         while (usec > 0) {
40                 if (usec > 65000)
41                         tmp = 65000;
42                 else
43                         tmp = usec;
44                 usec = usec - tmp;
45
46                 /* Set up TIMER 3 as timebase clock */
47                 timerp->tmr = DTIM_DTMR_RST_RST;
48                 timerp->tcn = 0;
49                 /* set period to 1 us */
50                 timerp->tmr =
51                     CONFIG_SYS_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR |
52                     DTIM_DTMR_RST_EN;
53
54                 start = now = timerp->tcn;
55                 while (now < start + tmp)
56                         now = timerp->tcn;
57         }
58 }
59
60 void dtimer_interrupt(void *not_used)
61 {
62         volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_TMR_BASE);
63
64         /* check for timer interrupt asserted */
65         if ((CONFIG_SYS_TMRPND_REG & CONFIG_SYS_TMRINTR_MASK) == CONFIG_SYS_TMRINTR_PEND) {
66                 timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF);
67                 timestamp++;
68
69                 #if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
70                 if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0) {
71                         WATCHDOG_RESET ();
72                 }
73                 #endif    /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
74                 return;
75         }
76 }
77
78 int timer_init(void)
79 {
80         volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_TMR_BASE);
81
82         timestamp = 0;
83
84         timerp->tcn = 0;
85         timerp->trr = 0;
86
87         /* Set up TIMER 4 as clock */
88         timerp->tmr = DTIM_DTMR_RST_RST;
89
90         /* initialize and enable timer interrupt */
91         irq_install_handler(CONFIG_SYS_TMRINTR_NO, dtimer_interrupt, 0);
92
93         timerp->tcn = 0;
94         timerp->trr = 1000;     /* Interrupt every ms */
95
96         dtimer_intr_setup();
97
98         /* set a period of 1us, set timer mode to restart and enable timer and interrupt */
99         timerp->tmr = CONFIG_SYS_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 |
100             DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN;
101
102         return 0;
103 }
104
105 ulong get_timer(ulong base)
106 {
107         return (timestamp - base);
108 }
109
110 #endif                          /* CONFIG_MCFTMR */
111
112 #if defined(CONFIG_MCFPIT)
113 #if !defined(CONFIG_SYS_PIT_BASE)
114 #       error   "CONFIG_SYS_PIT_BASE not defined!"
115 #endif
116
117 static unsigned short lastinc;
118
119 void __udelay(unsigned long usec)
120 {
121         volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_UDELAY_BASE);
122         uint tmp;
123
124         while (usec > 0) {
125                 if (usec > 65000)
126                         tmp = 65000;
127                 else
128                         tmp = usec;
129                 usec = usec - tmp;
130
131                 /* Set up TIMER 3 as timebase clock */
132                 timerp->pcsr = PIT_PCSR_OVW;
133                 timerp->pmr = 0;
134                 /* set period to 1 us */
135                 timerp->pcsr |= PIT_PCSR_PRE(CONFIG_SYS_PIT_PRESCALE) | PIT_PCSR_EN;
136
137                 timerp->pmr = tmp;
138                 while (timerp->pcntr > 0) ;
139         }
140 }
141
142 void timer_init(void)
143 {
144         volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE);
145         timestamp = 0;
146
147         /* Set up TIMER 4 as poll clock */
148         timerp->pcsr = PIT_PCSR_OVW;
149         timerp->pmr = lastinc = 0;
150         timerp->pcsr |= PIT_PCSR_PRE(CONFIG_SYS_PIT_PRESCALE) | PIT_PCSR_EN;
151
152         return 0;
153 }
154
155 ulong get_timer(ulong base)
156 {
157         unsigned short now, diff;
158         volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE);
159
160         now = timerp->pcntr;
161         diff = -(now - lastinc);
162
163         timestamp += diff;
164         lastinc = now;
165         return timestamp - base;
166 }
167
168 void wait_ticks(unsigned long ticks)
169 {
170         u32 start = get_timer(0);
171         while (get_timer(start) < ticks) ;
172 }
173 #endif                          /* CONFIG_MCFPIT */
174
175 /*
176  * This function is derived from PowerPC code (read timebase as long long).
177  * On M68K it just returns the timer value.
178  */
179 unsigned long long get_ticks(void)
180 {
181         return get_timer(0);
182 }
183
184 unsigned long usec2ticks(unsigned long usec)
185 {
186         return get_timer(usec);
187 }
188
189 /*
190  * This function is derived from PowerPC code (timebase clock frequency).
191  * On M68K it returns the number of timer ticks per second.
192  */
193 ulong get_tbclk(void)
194 {
195         ulong tbclk;
196         tbclk = CONFIG_SYS_HZ;
197         return tbclk;
198 }